How to develope a KM filter with EP 7.31

Dear all,
I have following questions regarding KM filters on an EP 7.31:
1.)Where the NWDS assistant for this purpose is gone on 7.31? Compare to NWDS 7.0:
2.)Are there any changes in the structure changes in the package between 7 and 7.31? Is this documented somewhere? Are there any tutorials or anything else about that? I found nothing about KM filter development excepting information on configuration, are own filter developments not longer supported on 7.31?
Thanks,
regards

By the way, meanwhile I found following:
Providing Business Configuration -  Knowledge Management Developer's Guide - SAP Library
On that page I can see this clue:
Parameter Definition
In your development project, create the directories as shown in the example for repository managers below. If you use a KM wizard, the directories are created automatically.
So it seems there is a KM wizard, but where? My NWDS is 7.3 SP6
regards
P.S. Sorry for the typo on 2. question, for some reasons Im not able to edit the post, it should be:
Are there any changes in the structure regarding the package between 7 and 7.31?

Similar Messages

  • How to implement af:table filter with java backend?

    Hi,
    One of the af:table feature is to have a filter over its column to filter data. I want to implement this feature, however I'm not able to find documentation or example for it.
    We use plain java as backend (i.e. not using ADF BC) and most of the documentation and examples over the net are with ADF BC.
    Have you done or come across an example of similar implementation before?
    Thanks for the help.

    Hi,
    You can implement your own filters by adding a "filter" facet to your af:column.
    http://jdevadf.oracle.com/adf-richclient-demo/docs/tagdoc/af_column.html
    Regards,
    Stijn
    http://webapplicationdeveloper.blogspot.com

  • How to use long capture filter with Network Monitor 3.4 command line

    I want to exclude all traffic from a list of subnets in my capture. This makes for a rather long and complex filter. Is there any option on the command line to refer to a file describing this filter or can one only use the /capture "my extremely long
    filter" command? So, I would have to make the entire thing into one line?

    I suppose if it's longer than 2048 or 4096, there will be a command line length limitation.  Maybe there's a way to work around it with a environment variable, but I think there will always be a limit.  Perhaps there's an easier way to right your
    filter?  Can you use something like the subnet example in the library to shorten the filter.
    Also, do you think your filter will affect capturing speed.  The more complex the filter, the longer it takes to evaluate each incoming message.  That means we have to buffer, and if the firehose is too much, we don't catch all the water :) 
    If the UI can keep up, then it shouldn't be a problem, but some firehoses are bigger than others.  Plus, there driver filters which can filter faster for NMCap.
    Moving forward, Message Analyzer (http://blogs.technet.com/blogs), is the replacement for Network Monitor, which can do the same most of the same kinds of capabilities, but using powershell.  I think you'd
    have more flexibility with variable lengths there.  Plus you can script fancy things.
    Paul

  • How To grant Permission on Filter with a Console (not with MaxL)

    Hello,
    i am new to V11.1.2.1 (in V9 we use Essbase standalone mode and move to Shared Services security mode in V11)
    With MaxL i can do a "gant filter MyApp.MyDB.Myfilter to MyexternalUser;"
    now i want to do this with Shared Services Console (or with Essbase Administration Web Console).
    With the EAS Web Console i can create the MyApp.MyDB.Myfilter.
    With Shared Services Console i can give MyexteralUser the permission "Filter" for the Essbase App "MyApp".
    But i found no way to grant the Myfilter to MyexternalUser.
    What are the steps (other than user MaxL) to do this with a console app ?

    Take a look at this thread, 4th post:
    http://www.network54.com/Forum/58296/thread/1300291022/hiding+level+0+dummy+members+with+filters
    Regards,
    Cameron Lackpour
    P.S. I think it's odd that this isn't documented anywhere particularly well. Has anyone seen it/have I just been my usual totally blind self?

  • How to develope a par file with a static html pages in NWDS

    Hi to all,
    what is the procedure to put static html pages as iviews by using programming.
    In my project hierarchy where should i keep the html file, and what component should be generated? to generate a par file.
    using that par i'll generate a iview and i will link to my page.
    but i need a procedure to generate a portal component of this type.
    if any body is having the procedure of this, or any online help documentation link u have please forward to me.
    Thanks & Regards,
    sireesha.

    Hi,
    Check whether KM is installed in your server. If yes then you can view it under Content Administration>> KM content(like the Portal Content).
    In that you can see the Root folder>>documents>>Public Documents. If you wish you can create your own folder or can  just upload the file inside that folder.
    1. to create a folder go to Folder >> new folder...
    2. to upload the file click Folder>>New>>upload.. then you can browse to the local system and from there you can upload file.
    The path that you have to give in the Iview shloud be like
    \documents\Public Documents\<your foldername>\filename.
    Hope this Helps
    gEorgE

  • How to Develop a Login Form In Developer 6i

    Hi to everyone,
    I have developed some forms in Developer 6i. Now i want to deploy these Forms to client side. I want to design a Login Form for the end users to Use the Database Application. But the problem is, I don't know how to Develop a Login Form with the permission for the End Users to access the application.
    Also please tell me how to configure the FORMS Developer 6i to Run the Forms by the end users.
    Please help me to solve out the problem.
    Thank you in advance.

    If you are using ADFBC, the easiest way is
    - drop the data control as ADF form
    - add CreateInsert method binding to the pagedef
    - add an invokeAction for the createInsert with a refresh property set to renderModel so that an empty creation form will be shown on page load
    for insertion
    - Finally, add the commit action as button
    Sireesha

  • Filter with OR operand

    I have two characteristics in the cube. Personnel Area and Personnel Sub Area. I like to build a BEx query that shows Personnel Area equals 0001 OR Personnel SubArea equals 0045.
    I cannot use filters directly, because it is trying to perform a logical AND of both of them, which is causing it not to return any data.
    so any ideas how I can execute a filter, with OR condition?

    Sachin,
    This has nothing to do with the KFs you want to display in your report. This is a 'dummy' KF, only used for simulating the OR condition.
    That is to say you only need to create one set of such KFs not one each for all KFs of your report.
    Hint : Starting KF could even be a locally defined formula with a constant value of '1' ; doesn't have to be a KF from provider.

  • How to develop an standalone application ?

    Hi everybody:
    I am a beginner. I had developed a database based application some years ago.
    Nowadays ALL is on web...
    My question is How to develop an standalone application with Java Studio Creator (or any other tool)?
    I DONT WANT ANY JSP, HTML, ETC...
    JUST files on java using swing for GUI.
    My problem is that I am not good at designing GUI's so I would like to use a visual tool for the arrangement of the swing components, generating just *.java files.

    Hi:
    The features you have attached dont answer my question. I have installed Java Studio Creator, but the only option is to create drag and drop the GUI components on a jsp file, not swing components on a java file....If I try to execute the java files generated on the Studio Creator with java from the command com they can not recognise the classes because they were ment to be under a web environment....

  • How to develope a XML-RPC client with PL/SQL

    Anyone know how to develop a XML-RPC client with PL/SQL?
    I've oracle 8i.
    Have you some example of code?
    Thanks
    Paolo

    So, you actually want to create the physical directory using JAVA?
    Then see:
    http://www.oracle-base.com/articles/8i/shell-commands-from-plsql.php

  • How to change the presets in pop-up menus (CS6 or CR 7, example Photo Filter) with arrow keys?

    How to change the presets in pop-up menus (CS6 or CR 7, example Photo Filter) with arrow keys an see at the same time the changes on the photo?
    It worked under Windows, now I use OS 10.8 and have to apply a preset with a click or Return button but after that the pop-up menu close so I have to open it once again to change a preset. Please help. Thank you!

    The filter panel is a shortcut for the content panel and it only effects the content of that window. So if you have a folder it will only see this as a folder and not with its content. (a Stack behaves about the same, being different in only counting the first file in the filter panel criteria but not what is in the stack itself)
    You have a view work arounds, first is use menu view / show items from subfolders (this can take some time especially if you have not used caching before on this content) and this builds visible thumbs for all content and that can be used for filtering.
    Or use the find command (Edit / find) and inhere specify the source and fill in the criteria include subfolders and this will give you the correct result.
    When you create a smart collection the find command also pops up given you the same opportunity to get the results in a collection, but since a collection is only a bunch of aliases referring to the originals you might be a bit careful with editing and deleting.

  • How to develop a report with current price &  the last price in the pre.yrs

    hi ,
    guys,
    my client want a report to list of material with respective vendor and to make a price comparison betn the current price & the last price in the privious year.
    can any one help how to develop the report, shall go for generic extrc.
    thanks in advace.
    ramnath

    CR CR 2011 / "Crystal reports For Visual Studio 2010", you are correct.
    Re. the database thinggy. You can connect to a database via ODBC, OLE DB or in some instances natively. Once a report is created you an change the datasource. A good sample app on how to do this is  csharp_win_dbengine / vb_win_dbengine. A link to the samples is here:
    Crystal Reports for .NET SDK Samples - Business Intelligence (BusinessObjects) - SCN Wiki
    More info on connecting to dbs and changing them is in the developer help files:
    SAP Crystal Reports .NET SDK Developer Guide
    SAP Crystal Reports .NET API Guide
    More info on CR APIs for .NET (applies to all versions of CR and VS):
    Crystal Reports for Visual Studio 2005 Walkthro... | SCN
    You can also use ADO .NET Datasets and in this way you handle the database connections in your app. A good sample is csharp_win_adodotnet (also available in VB) - same link as above.
    More info on datasets:
    Crystal Reports Guide To ADO.NET
    Crystal Reports for Visual Studio .NET - Walkthrough - Reporting Off ADO.NET Datasets
    For more complicated operations (e.g.; changing a report from ODBC to OLE DB, changing one table, etc., you will want to use the InProc RAS SDK that is also available in CRVS. Developer help files are here:
    Report Application Server .NET SDK Developer Guide
    Report Application Server .NET API Guide
    Sample apps are here:
    NET RAS SDK Samples - Business Intelligence (BusinessObjects) - SCN Wiki
    and here:
    Crystal Reports .NET In Process RAS (Unmanaged) SDK Sample Applications
    More info on RAS SDK:
    How to Use The RAS SDK .NET With In-Process RAS Server
    Lastly, do use the search box in the top right corner. I find simple search strings such as 'crystal net parameter' return best results (KBAs, Blogs, docs, wikis, discussions and more).
    - Ludek

  • How to create a WMI filter in order to apply to machines that have Skype already installed with deploying a newer version of Skype

    Hi there,
    I was wondering whether anybody could tell me how to create a WMI filter in order to apply to machines that have Skype already installed with deploying a newer version of Skype.
    Your help would be much appreciated.
    Many thanks,
    Timbuctoo

    Hi,
    To create a WMI filter
    1.In the Group Policy Management Console (GPMC) console tree, right-click
    WMI Filters in the forest and domain in which you want to create a WMI filter.
    2.Click
    New .
    3.In the
    New WMI Filter dialog box, type a name for the new WMI Filter in the
    Name box, and type a description of the filter in the Description box.
    4.Click
    Add .
    5.In the
    WMI Query dialog box, either leave the default namespace (root\CIMv2) or enter another namespace by doing one of the following:
    ◦ In the
    Namespace box, type the name of the namespace that you want to use for the WMI query.
    ◦ Click
    Browse , select a namespace from the list, and then click
    OK .
    6.Type a WMI query in the
    Query box, and then click OK .
    7.To add more queries, repeat Steps 4 through 6 to add each query.
    8.After adding all queries, click
    Save .
    In the Query box, type the following WMI query:
    Select * from Win32_Product where Name LIKE “%Skype%”
    Best Regards,
    Erin

  • How to convert CLOB to BLOB with SQL Developer migration wizard?

    Hi,
    According to our requirement, we need to only migrate data from SQL Server 2008 to Oracle 11. I use the SQL Developer 3.0.04 migration wizard to do it.
    I do migration from SQL Server (database name: SCDS41P2) to Oracle (User name: HCDS41P2).
    My migration steps are as below: (I need to modify the target schema, so I add the steps 2) and step 3) )
    1) Do migration by SQL Developer migration wizard;
    2) Remove the Converted Database Objects node from migration project;
    3) Re-do convert by SQL Developer migration wizard (contains changing the target schema);
    When do step 1), the DBO_SCDS41P2 user is created automatically. CLOBTOBLOB_SQLDEVELOPER procedure is also created in this user.
    I continued to run step 2) and step 3) with online mode. And find the table data which contains BLOB column can be moved into the target table. But from the Logging Page, I can't see the other detailed error info, so that I can't check which tables don't move data successfully.
    Could you please tell me where the detail log file (e.g. contains every table's migration status) is if I use the online mode?
    Additional, If I use offline mode to do step 3), I found the CLOB data can't be converted into BLOB automatically. Because in the load script (that is oracle_ctl.bat), only copy the source data to the CLOB column. After copy, it don't deal with the converting from CLOB to BLOB.
    So could you please tell me how to convert CLOB to BLOB with offline mode?
    Thanks so much.

    Hi,
    For your first question about logging - after the migration there will be an entry in the right hand panel for the migration project. If you open this there are various fields that give information about the status of each part of the migration. Does this give you the information you need ?
    For the second problem about offline moving blob data have a look at the SQL*Developer documentation -
    Oracle® SQL Developer User’s Guide Release 3.0
    in the section -
    2.2.8.1.4 Populating the Destination Database Using the Data Files
    which describes the problem and how to get round it.
    Regards,
    Mike
    Edited by: mkirtley on Aug 12, 2011 10:49 AM

  • How to filter with multiple selection on a single column on external list, currently only one filter per column is available.

    I have external list where i want to apply multiple filter for every column like we do in Excel spreadsheet - we can filter a spreadsheet column by selecting multiple checkbox for every  column. I am using Sharepoint 2010
    Is this possible in sharepoint 2010? Any idea how to acheive that?
    Thanks in advance.

    Hi Rahul,
    According to your description, my understanding is that you want to use filter with multiple values on a column of an external list in SharePoint 2010.
    Per my knowledge, there is not an OOB way to achieve it. As a workaround, you can custom the web part to implement it. There is an articles for your reference:
    http://blogs.telerik.com/aspnet-ajax/posts/13-11-05/add-excel-like-multi-select-filtering-to-your-asp.net-datagrid
    In addition, you can use a third party solution to achieve it, please take a look at:
    http://abilitics.com/Blog/index.php/sharepoint-improved-grids-with-excel-like-inline-editing/
    http://social.technet.microsoft.com/forums/sharepoint/en-US/3d19b9d3-d394-4af9-9e8e-2dee70b50540/filter-column-with-multiple-filter-values-in-sharepoint-list
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • How to develop web application using ejb3.0 with eclipse

    Hi ,
    I am new to ejb3.0 with eclipse. If any one familar that please guide me...
    how to develop web application using ejb3.0 with eclipse.please help me... server jboss4.2.2. database mqsql5.0
    Thanks,

    jsf_VWP5.5.1 wrote:
    I am new to ejb3.0 with eclipse. If any one familar that please guide me...http://help.eclipse.org/help33/index.jsp

Maybe you are looking for