How to develope a par file with a static html pages in NWDS

Hi to all,
what is the procedure to put static html pages as iviews by using programming.
In my project hierarchy where should i keep the html file, and what component should be generated? to generate a par file.
using that par i'll generate a iview and i will link to my page.
but i need a procedure to generate a portal component of this type.
if any body is having the procedure of this, or any online help documentation link u have please forward to me.
Thanks & Regards,
sireesha.

Hi,
Check whether KM is installed in your server. If yes then you can view it under Content Administration>> KM content(like the Portal Content).
In that you can see the Root folder>>documents>>Public Documents. If you wish you can create your own folder or can just upload the file inside that folder.
1. to create a folder go to Folder >> new folder...
2. to upload the file click Folder>>New>>upload.. then you can browse to the local system and from there you can upload file.
The path that you have to give in the Iview shloud be like
\documents\Public Documents\<your foldername>\filename.
Hope this Helps
gEorgE

Similar Messages

How to cache a content item like a Static HTML Page from UCM to Coherence/C

Hi All,
How to cache a content item like a Static HTML Page from UCM to Coherence/Coherence Web?
Thanks

Hi,
Could you explain your use case in more detail?
It does not look like proper use of coherence to cache static content - it more suited for dynamic content like user session etc.
Adam

Map with 500 pdfs. How to make a new file with only the first pages, new file with second pages etc.

Hi,
A client confronted me with the next question:
I have a map with 500 pdf's in it.
Is it possible to make a new file with only the first page of each pdf?
After that to make a new file with only the second page of each pdf?
And after that the third?
Etc.
Is that possible with an action?
Or are there scripts for?
I couldn't find them.
I use an iMac with Acrobat XI.
Any help is very welcome.
Thanks in advance.
Bornholm

You can extract each page from each pdf as a seperate page. Once this is done you can select the pages tocombine.
You would have to write custom a custom JavaScript and programatically code the names to combine if the extracted file pages habvestandars naming that could be programed. There maybe some security coding you will have to do because of Adobe restrictions but this all documented in the Acrobat JavaScript Reference.

Deploy par files with code from NWDI

Hello Experts,
I have migrated some par files to NWDI and they are deployed via SDM as SDA files.
From eclipse it is possible to deploy the par files with Code. Is this possible from NWDI that the par files are deployed with code to the portal server.
Regards
Sundeep

Hi Satish,
I am using NWDS, and then check in the Portal DC which is then deployed on the runtime system.
My question is during deployment via NWDI is it possible that the par is deployed with code.
Earlier we were using eclipse for par based development, and this was possible in eclips.
With NWDI i dont think it is possible to control if the par should be deployed on the portal server with code included.
Regards
Sundeep

How to create a PAR file in Web Dynpro

Hi !!
Could any one tell me how to create a par file of the java application developed in WebDynpro..
thanks
ChandraSekar Maheswaran

Hi,
Refer the link
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/a-c/creating%20your%20first%20web%20dynpro%20application.pdf
Webdynpro concepts
Regards,
Tamil K

How to create a PAR file from EAR file

Hi,
I have created an Web Dynpro Application . When i deploy it in Remote J2EE Engine, it will deploy as EAR file. It then runs as normal Web Application in Web browser. My requirement is to create an iView for my Web dynpro appn in EP. That is possible only by creating a PAR file. so How to create an PAR file from EAR in NWDS(NetWeaver Developer Studio).
How to access the EAR file in NWDS or J2EE ?
Thanks in Advance ,
By
Saravanan

Hi,
To create a iview,
log on to portal, New iView and select SAP webdynpro iview.
It will ask for namespace which is usually , local/Project Name
and application name is the name of the application.
We dont have to create par file for this requirement

How can I associat ".swf" files with flashlite 2.1

How can I associate ".swf" files with flashlite 2.1? When I
install flash lite 2.0,it can do ---- click .swf files system can
autoly use flashlite to play.But now I install flashlite 2.1,it
lost this ability return as "unknow files formate".
Now,how can I reassociate ".swf" with flashlite 2.1?
first: I must use flashlite 2.1.
second:I must click .swf file directly.
I know another way to open :open the player and then find the
.swf,and open it. But ,unfortunately,I can not use this way to
open.Now I will be looking for another way.

unfortunately, the 2.1 developer edition you have installed
has not overwritten the original version integrated into the
symbian OS by the manufacturer. This means that the only way to
open the 2.1 files is to open the 2.1 player from your apps menuu,
and click on the swf file. You will only get direct access if the
updated player is in a firmware update for you handset.
Matt
http://www.outside-media.co.uk/blog

How to load unicode data files with fixed records lengths?

Hi!
To load unicode data files with fixed records lengths (in terms of charachters and not of bytes!) using SQL*Loader manually, I found two ways:
Alternative 1: one record per row
SQL*Loader control file example (without POSITION, since POSITION always refers to bytes!)<br>
LOAD DATA
CHARACTERSET UTF8
LENGTH SEMANTICS CHAR
INFILE unicode.dat
INTO TABLE STG_UNICODE
TRUNCATE
A CHAR(2) ,
B CHAR(6) ,
C CHAR(2) ,
D CHAR(1) ,
E CHAR(4)
) Datafile:
001111112234444
01NormalDExZWEI
02ÄÜÖßêÊûÛxöööö
03ÄÜÖßêÊûÛxöööö
04üüüüüüÖÄxµôÔµ Alternative2: variable length records
LOAD DATA
CHARACTERSET UTF8
LENGTH SEMANTICS CHAR
INFILE unicode_var.dat "VAR 4"
INTO TABLE STG_UNICODE
TRUNCATE
A CHAR(2) ,
B CHAR(6) ,
C CHAR(2) ,
D CHAR(1) ,
E CHAR(4)
) Datafile:
001501NormalDExZWEI002702ÄÜÖßêÊûÛxöööö002604üuüüüüÖÄxµôÔµ Problems
Implementing these two alternatives in OWB, I encounter the following problems:
* How to specify LENGTH SEMANTICS CHAR?
* How to suppress the POSITION definition?
* How to define a flat file with variable length and how to specify the number of bytes containing the length definition?
Or is there another way that can be implemented using OWB?
Any help is appreciated!
Thanks,
Carsten.

Hi Carsten
If you need to support the LENGTH SEMANTICS CHAR clause in an external table then one option is to use the unbound external table and capture the access parameters manually. To create an unbound external table you can skip the selection of a base file in the external table wizard. Then when the external table is edited you will get an Access Parameters tab where you can define the parameters. In 11gR2 the File to Oracle external table can also add this clause via an option.
Cheers
David

How can I print a file with mixed page orientation in windows 8.1?

I have a win 7 and a win 8.1 computer. I have a file which contains both landscape and portrait pages. The file prints correctly with the mixed orientation from the win 7 pc, but will only print with either landscape or portrait on the win 8.1 pc.
I am using Adobe reader XI on the win 7 pc and adobe touch on the win 8.1 pc

ส่งจาก จดหมายของ Windows
จาก: Pat Willener
ส่งเมื่อ: จ. 5 มกราคม 2558 6:15
ถึง: thang dinhvan
How can I print a file with mixed page orientation in windows 8.1?
reply from Pat Willener in Adobe Reader Touch for Windows 8 - View the full discussion
I have a win 7 and a win 8.1 computer. I have a file which contains both landscape and portrait pages. The file prints correctly with the mixed orientation from the win 7 pc, but will only print with either landscape or portrait on the win 8.1 pc.
I am using Adobe reader XI on the win 7 pc and adobe touch on the win 8.1 pc
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7064031#7064031 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7064031#7064031
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Adobe Reader Touch for Windows 8 by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

There is no 'Save as' under the file menu. How do I save a file with another name?

Numbers help refers to the 'Save As' function in the File menu. My version (latest) does not have a 'Save As' function. How do I save a file with another name?

Ross Millard wrote:
Badunit. You have an original file and an edited file. Now you duplicate the edited file and save it with a different name. Now do you have to go and delete the changed file from which the duplicate had been made? And.... is the original still unchaned... still original?
Ross,
For the situation you describe, Apple has provided Duplicate and Revert. Use File > Duplicate to reach this menu:
Regards,
Jerry

How to create a pdf file with CS5

Hello, I'm new to PhotoShop CS5 and haven't figured out yet (despite two hours of trying) how to create a pdf file with pictures and texts. Can someone please help me with this ? The "help" button in CS5 doesn't seem to cover this question. Nor do the FAQs.
Thank you very much.

Save As... Photoshop PDF.

How to fix the .pdf file with error "invalid annotation object"

how to fix the .pdf file with error "invalid annotation object"

As long as the PDF opens, then just try saving it to a new file name. There may be a preflight script that would help troubleshoot the issue.

How to convert a pdf file with hand-written signature?

How to convert a pdf file with hand-written signature?

Hi Lotus1215,
Once the document is signed we cannot edit that document, hence convertion is not possible
Please see the article mentioned below
http://forums.adobe.com/docs/DOC-1515
Let me know if you have any other question.
Regards,
~Pranav

How to create a csv file with NCS attributes?

Hi
i installed Cisco Prime NCS and trying to perform bulk update of device credentials with csv file.
How to create a csv file with all required attributes?
This is part of NCS online help talking about this topic:
Bulk Update Devices—To update the device credentials in a bulk, select Bulk Update Devices from the Select a command drop-down list. The Bulk Update Devices page appears.You can choose a CSV file.
Note The CSV file contains a list of devices to be updated, one device per line. Each line is a comma separated list of device attributes. The first line describes the attributes included. The IP address attribute is mandatory.
Bellow is test csv file i created but does not work:
10.64.160.31,v2c,2,10,snmpcomm,ssh,zeus,password,password,enablepwd,enablepwd,60
10.64.160.31,v2c,2,10,snmpcomm,ssh,zeus,password,password,enablepwd,enablepwd,60
The error i am getting while importing this file:
Missing mandatory field [ip_address] on header line:10.64.160.31,v2c,2,10,snmpcomm,ssh,zeus,password,password,enablepwd,enablepwd,60
Assistance appreciated.

It looks like the IP address field is incorrectly set.,
It should be as follows
{Device IP},{Device Subnet Mask}, etc etc
so a practical example of the aboove could be (i dont know if this is completely correct after the IP address / Subnet Mask)
10.64.160.31,255.255.255.0,v2c,2,10,snmpcomm,ssh,zeus,password,password,enablepwd,enablepwd,60
below is a link to the documentation
http://www.cisco.com/en/US/docs/wireless/ncs/1.0/configuration/guide/ctrlcfg.html#wp1840245
HTH
Darren

In Pages how do I save a file with another name

In Pages how do I save a file with another name?

I don't know if there is a less cumbersome way to do this (I'm still pretty new to Lion) but This is what I do - since "Save As" seems to be gone with Lion.
I create a duplicate document - then click the red button to close the document - and a dialog box pops up and asks if you want to save the changes - I change the name in there and then save the file under the new name.
You can also save the copy to the desktop - get info - and then change the name if the finder window.
I copied this from the Pages help area. These help instructions were created pre-Lion I'm sure.
Saving a Copy of a Document
If you want to make a copy of your document—to create a backup copy or multiple versions, for example—you can save the document using a different name or location. (You can also automate saving a backup version, as Automatically Saving a Backup Version of a Document describes.)
To save a copy of a document:
Choose File > Save As and specify a name and location.
The document with the new name remains open. To work with the previous version, choose File > Open Recent and choose the previous version from the submenu.

How to develope a par file with a static html pages in NWDS

Similar Messages

Maybe you are looking for