How to devide a single task into multiple tasks in OSM 6.3 ?

Hi all,
i am using OSM 6.3 and trying to devide one task in to multiple tasks, such that the subtasks can be shown in a combo box ?
basically the requirement -->
There is a order and the order can have many services which are independent of each other. So i want to show the different services to user, which they can select and accordingly the reqired data elements will be visible in webclient.
i am new to this domain so may not be able correct in wordings.
thanks in advance.
regards,
Rosaa

Hi,
if you are using >= TS2010 there is support of 64Bit integers (int64 and uint64).
with it you are able to store your 6 bytes.
I am using it for saving MAC-Address.
Regards
Juergen
=s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

Similar Messages

How to make a single recording into multiple songs garageband

I recorded my band's gig the other night using my Zoom H2 recorder. I want to take the single 1.5 hour recording (12songs) and make it into a CD with 12 individual tracks. I would like to use garageband so i can edit out the deadtime between songs but I don't know how to make a CD.

johndmalone wrote:
I want to take the single 1.5 hour recording (12songs) and make it into a CD with 12 individual tracks
http://www.bulletsandbones.com/GB/GBFAQ.html#chaptertocdtracks
(Let the page FULLY load. The link to your answer is at the top of your screen)

How to import a single schema into multiple target schema?

Hi,
I want to import a schema named sd from my source database to my target database in schema sd1 and sd2.
I have tried using the following impdp parameter which is throwing error :-
impdp system/system schemas=sd remap_schema=sd:sd1,sd:sd2 directory=backup dumpfile=8.12.13.dmp logfile=8.12.13.log
Please help me.

If you look up the syntax in the docs, you will see that while you can remap many schemas into one, you cannot remap one schema into many.

Split Single IDOC into Multiple IDOC's Based on Segment Type

Hi Experts,
I have a scenario IDOC to FILE , Split Single IDOC into Multiple IDOC's based on Segment Type
Outbound:
ZIdocName
Control Record
Data Record
Segment 1
Segment 2
Segment 3
Status Record
I should get output like below
Inbound:
ZIdocName
Control Record
Data Record
Segment 1
Status Record
ZIdocName
Control Record
Data Record
Segment 2
Status Record
ZIdocName
Control Record
Data Record
Segment 3
Status Record
Please suggest me step by step process to achieve this task.
Thanks.

Thanks a lot Harish for reply.
I have small doubt. According to your reply , If we have N number of segments in single IDOC with same fields in all segments then for splitting Single IDOC into Multiple IDOC's based on Segment Type we need to duplicate N number of target IDOC tree structure.
Is that possible to Split single IDOC into Multiple IDOC's based on Segment Type using only one Target IDOC structure without duplicating the Target IDOC structure tree.

How do i combine single pages into documents with Adobe?

How do i combine single pages into documents with Adobe?

Hi zebideeplus,
Using Reader, you need to purchase subscription for Adobe PDF Pack to combine PDF files into single document.
Refer: Acrobat.com Help | Adobe PDF Pack FAQ
But, if you need to combine single pages, then it can be done with Adobe Acrobat only.
Let me know if you have further queries.
Regards,
Anubha

How do I separate a PDF into multiple PDFs using Adobe PDF Pack?

How do I separate a pdf into multiple pdfs using AdobePack?
[Title edited to reflect actual product name... Mod]

I do not find "AdobePack" when I look at the list of forums https://forums.adobe.com/welcome
What is the exact name of the program you are using... Acrobat, or are you using the online version at Acrobat.com?
ADDED... found Adobe PDF Pack (read only) so will move this message

How can I separate one column into multiple column?

How can I separate one column into multiple column?
This is what I have:
BUYER_ID ATTRIBUTE_NAME ATTRIBUTE_VALUE
0001 PHONE_NUMBER 555-555-0001
0001 EMAIL [email protected]
0001 CURRENCY USD
0002 PHONE_NUMBER 555-555-0002
0002 EMAIL [email protected]
0002 CURRENCY USD
0003 PHONE_NUMBER 555-555-0003
0003 EMAIL [email protected]
0003 CURRENCY CAD
This is what I would like to have:
BUYER_ID PHONE_NUMBER EMAIL CURRENCY
0001 555-555-0001 [email protected] USD
0002 555-555-0002 [email protected] USD
0003 555-555-0003 [email protected] CAD
Any help would be greatly appreciated.

This is another solution. Suppose your actual table's name is test(which has the redundant data). create a table like this:
CREATE TABLE test2 (BUYER_ID number(10),PHONE_NUMBER varchar2(50),EMAIL varchar2(50),CURRENCY varchar2(50));
then you will type this procedure:
declare
phone_number_v varchar2(50);
EMAIL_v varchar2(50);
CURRENCY_v varchar2(50);
cursor my_test is select * from test;
begin
for my_test_curs in my_test loop
select ATTRIBUTE_VALUE INTO phone_number_v from test
where person_id=my_test_curs.person_id
and attribute_name ='PHONE_NUMBER';
select ATTRIBUTE_VALUE INTO EMAIL_v from test
where person_id=my_test_curs.person_id
and attribute_name ='EMAIL';
select ATTRIBUTE_VALUE INTO CURRENCY_v from test
where person_id=my_test_curs.person_id
and attribute_name ='CURRENCY';
INSERT INTO test2
VALUES (my_test_curs.person_id,phone_number_v,EMAIL_v,CURRENCY_v);
END LOOP;
END;
Then you will create your final table like this:
create table final_table as select * from test2 where 1=2;
After that write this code:
INSERT ALL
into final_table
SELECT DISTINCT(BUYER_ID),PHONE_NUMBER,EMAIL,CURRENCY
FROM TEST2;
If you have a huge amount of data in your original table this solution may take a long time to do what you need.

How to insert one table data into multiple tables by using procedure?

How to insert one table data into multiple tables by using procedure?

Below is the simple procedure. Try the below
CREATE OR REPLACE PROCEDURE test_proc
AS
BEGIN
INSERT ALL
INTO emp_test1
INTO emp_test2
SELECT * FROM emp;
END;
If you want more examples you can refer below link
multi-table inserts in oracle 9i
Message was edited by: 000000

How to Park the single invoice for multiple purchase orders

Hi,
How to Park the single invoice for multiple purchase orders?

brother this is possible to enter one Invoice fro multiple purchase order.
call transaction MIR7, select " purchase order/Scheduling Agreement" from the PO refernce Tab. then click on arrow. give your purchase orders here.
Thanks

Splitting single video into multiple files - workflow improvements?

I regularly need to split a single video into multiple separate files that are used by other programs. I'm using Premiere Pro CS4 for a number of reasons including the ability to easily and accurately select a scene by individual frames, native audio and video effects/filters, and the ability to import and export various video types. I'm open to using other tools, but I haven't yet found one that is even close to Premiere Pro when it comes to accurately selecting split points.
I'm not a Premiere Pro expert. I have been doing this for about four months and have read many resources (books, forum posts, help guides) to refine the workflow I'm currently using. My question: does anyone know any improvements that might save me time/keystrokes.
Current workflow:
I've bound F8 to File > Export > Media
Import video file
Open in source monitor
Set In and Out points for scene in source monitor
Ctrl-drag from source monitor to Project Panel (creates a subclip)
Repeat 3 and 4 for all scenes/subclips
Select all subclips from Project Panel and drag to timeline
Set work area bar to first subclip in timeline by the following four keystrokes: Home, Alt-[, PageDown, Alt-]
Type F8 (File > Export > Media shortcut). Type output file name, click OK and the first subclip is put in the AME queue
For the remaining subclips, type: Alt-[, PageDown, Alt-], F8, output file name, OK and repeat until done
Any thoughts/ideas on workflow improvements?
Thank you!

Thank you Hunt.
For the sake of brevity, I didn't include all of the details about the various aspects of the projects.
Early on I was doing what you suggested and yes, it is a little quicker. I learned (painfully) a couple of months later that I sometimes have to go back and adjust the clips and this method (trim to timeline with no subclips) resulted in quite a bit of duplicate effort (to reobtain start/stop points). I've since learned that managing the "scenes" as subclips in topical bins allows me to go back and make adjustments, long after I've totally forgotten about the project content, without a lot of unnecessary reworking.

How do I send single notifications to multiple people in the workflow?

HI
As I see you can send notification to one person at a time.
For example, the approval notification goes to a approver once someone submits a expense report or po approval.
How do I send single notifications to multiple people in the workflow?
Any idea?
Thanks in advance.

Hi,
You need to send the notification to a role, which can comprise one or more than one users. If you check the "Expand roles" checkbox, then a different copy of the notification will be sent to each member of the role; otherwise one notification is sent which can be viewed by all holders of the role.
You should always send a notification to a role rather than a user, anyway - roles do not go on holiday, get sick or leave the company; users do.
HTH,
Matt
WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
Have you read the blog at http://thoughts.workflowfaq.com ?
WorkflowFAQ support forum: http://forum.workflowfaq.com

Script to parse last 24 hours from TaskScheduler Log Cannot figure out how to prase a single task.

All,
I've been tasked with parsing a single task from a server scheduled task and email that to a couple individuals and a distribution list. I had the email portion working, and am now getting...
‘You cannot call a method on a null-valued expression.
$smtp.Send(&msg)
It is defined ‘$msg = new-object Net.Mail.MailMessage’
I also need to parse out only a specific task in the log. I have tried everything that I can think of and find to get to that level, but this is my first attempt at PowerShell. Here is what I have so far.
# Written by Shawn Miller #
# Parse Task Scheduler Log and #
# Email log to Regional Support #
# and End-Users #
# 4 FEB 14 ver. 1 #
# Parse scheduler log and create file
$yesterday = (get-date) - (new-timespan -day 1)
$events = get-winevent -FilterHashtable @{logname = "Microsoft-Windows-TaskScheduler/Operational"; ID = "201","202"; StartTime = $yesterday} | Format-List -Property Message | out-file "c:\stuff\test.log"
$events |foreach {
$_
# Create new email
$smtpServer = “phcmail.peabodyenergy.com”
$msg = new-object Net.Mail.MailMessage
#From Address
$msg.From = "Monitoring Admin <[email protected]>"
#To Address, Copy the below line for multiple recipients
$msg.To.Add(“[email protected]”)
#$msg.To.Add(“[email protected]”)
#$msg.To.Add(“[email protected]”)
#$msg.To.Add(“[email protected]”)
#Message Body
$msg.Body=”Attached is the status report for the EoM Midwest Engineering files copied to STLEN1.”
#Message Subject
$msg.Subject = “EoM Transfer report”
write-host "SENDING FILES"
#your file location
$files=Get-ChildItem “C:\Stuff\report\”
Foreach($file in $files)
Write-Host “Attaching File :- ” $file
$attachment = New-Object System.Net.Mail.Attachment –ArgumentList C:\Stuff\report\$file
$msg.Attachments.Add($attachment)
$smtp.Send($msg)
$attachment.Dispose();
$msg.Dispose();
write-host "Mail Sent Successfully"
Any help would be greatly appreciated.
Respectfully,
Shawn

I would use PowerShell to do this but you need to fix a lot of the code you have copied from various places. Most of it is old.
Start with this:
#Parse scheduler log and create file
$yesterday =[DateTime]::Today.AddDays(-1)
get-winevent -FilterHashtable @{logname = "Microsoft-Windows-TaskScheduler/Operational"; ID = "201","202"; StartTime = $yesterday} |
Format-List -Property Message |
out-file c:\stuff\test.log
$mailprops=@{
SmtpServer='phcmail.peabodyenergy.com'
From ='Monitoring Admin <[email protected]>'
To='[email protected]','[email protected]'
Body='Attached is the status report for the EoM Midwest Engineering files copied to STLEN1.'
Subject='EoM Transfer report'
$files=Get-ChildItem C:\Stuff\report\
Send-MailMessage @mailprops -Attachments $files
write-host "Mail Sent Successfully"
It is more likely to work assuming you have access to an SMTP server which is not likely in a domain. Check with your domain admins to find out how to gain access.
¯\_(ツ)_/¯

Splitting the single record into multiple records based on validity

Hi Guru's,
basically i am an BI consultant with less knowledge on ABAP, can i request your help on the ABAP task.
I am working on HR module which is integrated with SAP BI, the reports will be executed based on calendar month the requirement is i should split the single record into a multiple records based on validity of the record. basically the HR data would be in data from and date to.
below is the logic
Check whether the start and end date of the record are in the same month and year.
If yes  nothing changes
If no  create multiple records
1st record  original start date of the record u2018till end of that month
Following record  1st of the next month u2018till last day of the month
u2026
Last record  1st of the month u2018till original end date.
All fields will have the same values, only the datefrom and dateto fields change.
Can any one please provide me the same code to proceed on my task.
Thanks and Regards,
Venkat

Hi,
Using Rule group we can split it.
Using Rule Group in SAP-BI Part - 1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/s-u/using%20rule%20group%20in%20sap-bi%20%20part%20-%201.pdf
Thanks
Reddy

How to generate a single report using multiple Databases

Hi All
Is it possible to create a single report using multiple databases
I am working on Database A to generate reports usually,, but now i have a second database for which the data is coming from flat files now i have to use few tables from
Database B to generate a single report,,,,, can any one help with the process

Hi,
i didn't see this properly in your post:
but now i have a second database for which the data is coming from flat files if you have ETL then make flat files as source then create target tables in db:B itself.. .Now, import them in the rpd..
If not, import both those tables into rpd with different connections..
Create physical joins by selecting those tables and perform joins operations over db's in physical layer..

How to split large video files into multiple individual clips by date

Hello. I'm looking for a freeware/shareware program (if one exists, or willing to pay for one if it does this well) that will:
1) Analyze a large AVI file identifying the start/start points of each segment of video and the dates the video segments were shot.
2) Then allow me to organize (for example, join 2 or more segments together if it's a video with a lot of start/stop points during the same shot) the segments identified in step 1 into logical clips that could be split apart from the 1 large AVI file.
3) Lastly, it would split my one large AVI file into the multiple clips or files that I identified in step 2.
A piece of software called FootTrack does a great job analyzing AVI files as I describe in steps 1 & 2, but it doesn't allow you to split or export the one avi file into multiple avi files.
I really don't want to have to do this one clip at a time, I've got to believe there's a program out there that will automate this process for me.
Thanks

I don't know of a way to automate it. I just did about 15 years worth. It wasn't too hard. I use an application called mpegstreamclip. Its very easy and free to download either from the apple site or direct from its site.
http://www.squared5.com/
Bascically you set the in and out points with the i and o keys and export.

How to devide a single task into multiple tasks in OSM 6.3 ?

Similar Messages

Maybe you are looking for