How to differentiate issues

How to differentiate issues between Oracle SOA Suite and an application installed on the top?
Is it possible to recognize when a eventual error is in Oracle SOA?
How ?

qpulos has provided a very good explanation.
- The fundamental difference between a router and a Layer 3 switch is that Layer 3 switches have optimized hardware to pass data as fast as Layer 2 switches, yet they make decisions on how to transmit traffic at Layer 3, just like a router. Within the LAN environment, a Layer 3 switch is usually faster than a router because it is built on switching hardware. In fact, many of Cisco's Layer 3 switches are actually routers that operate faster because they are built on "switching" hardware with customized chips inside the box.
- Layer 3 Switching / Routing
Layer 3 switches are essentially Layer 2 switches with a routing engine
Designed to specifically route traffic between VLANs in a LAN environment
Routing over WAN networks can still be supported, simply by plugging a traditional router that connects to the WAN networks into the LAN
- Using Layer 3 switches for inter-VLAN routing as opposed to traditional routers is popular for the following reasons
Performance versus Cost-Layer 3 switches are much more cost effective than routers for delivering high-speed inter-VLAN routing. Routers have many more features and can support a wide variety of WAN media options; however, many of these extra features are not required for inter-VLAN routing.
Port density-Layer 3 switches have the same high port densities that Layer 2 switches have.
Flexibility-Layer 3 switches allow you to mix and match Layer 2 and Layer 3 switching
Check the below link for diffrence between l2 and l3 swith.
http://www.cisco.com/web/about/ac123/ac147/archived_issues/ipj_1-2/switch_evolution.html
Regrads,
Pravin

Similar Messages

  • How to differentiate b/w Plan and actual data

    Hi,
    How to differentiate b/w plan nad actual data.
    Is that value type or Version InfoObject??
    What should be the value for that and how it gets populated ??
    Regards,

    Hello Tapan,
    The plan and actual data is differentiated on the basis of value of infoobject 0VTYPE. Value 10 is for actual. Different plan versions can be differentiated by different values of infoobject 0VERSION.
    These values are populated when actual data is loaded or plan data is entered.
    Hope it helps.
    Regards,
    Praveen

  • Can you please help me how resolved this issue.

    Hi Experts
    I am trying to connect LDAP by R/3 system. R/3 system connected to LDAP but when I am trying to find and pull the fileds in the "Find in the Directolry" option I am getting below error.
    LDAPRC 010 another server is referenced.
    Can you please help me how resolved this issue.
    With Regards,
    Trinadh Bokka

    You may be able to solve by using
    Note 1151329 - Depth of LDAP search is only one level below the base entry
    Markus

  • How to differentiate a Goods receipt ?

    hello gurus
    how to differentiate the Goods receipts which are done only against an Inbound Deliveries  from that of direct POs.
    Is there any table to check the same ?
    Thanks in advance

    Hi,
    There is no link anywhere for this,
    You will have to refer to EKES,MSEG,EKPO or EKBE
    Diwakar

  • How to differentiate the Purch Orders created with reference to in table

    Hi all
      how to differentiate the Purch Orders which are created with reference to Purch requsitions, contract, manual by copying inforecord in the table EKKO/EKPO? Is there any Field Indicators?
    Rgds
    Ramesh

    Hi Ramesh,
    Go through  EKPO there is a Table BANFN it will update when you create a PO with reference to PR
    Do se11 > Table EKPO> CtrlShiftF10 > Assign any of PO no. in the EBELN > Execute > you will find BANFN table
    it indicates Purchase Requisition Number. it will update when you create PO with reference to PR.
    Regards,
    Vraj

  • How to differentiate defects in QA32 using Traffic light

    Hi QM Experts,
    My scenario is,
    How to set Monitor control in QA32 screen.
    In the QA32 screen list of inspection lot will be displayed, for that inspection lot if any characteristics value is within / outside the limit, ie. for example specification is A2,R3 and i found 1 defect also defect is 4.
    how to differentiate this with the help of Traffic light.
    Regards,
    Krish

    Hi Krish,
    As per best of my information, the traffic lights in QA32, depends on the Start Sate and End Date of the inspection lot.
    If the End Date is not passed away (the current date is between the Start Date and End Date) it will be yellow.
    If the End Date is Passed away and UD is not not for the Lot then the traffic light will be RED and as soon as UD done at any date/stage the light will become Green.
    Conclusively, the light can't be linked with Defect Codes.
    Regards,
    Shyamal

  • How to differentiate between Parent and Child in IBASE?

    Hi. I am working on enhancing a BAPI :BAPI_GOODSMVT_CREATE by calling the following function module IBPP_CREATE_IBASE at its exit.
    The BAPI is being called from an SAP ME system and will be passing MATNR and Serial Number of Parent and Child materials to create the IBASE in ECC system. I am confused as to how to differentiate between whether a object is Parent or a Child when the BAPI: BAPI_GOODSMVT_CREATE is called.

    if you have NULL valued fields. If
    you do a compare and one or both are NULL, then the result is always NULL,
    never true or false. Even comparing two fields which are both NULL will
    give NULL as result, not true! Or if you have something like "select
    sum(field) from ..." and one or more are NULL, then the result will be
    NULL. Use always "if field is NULL ..." for NULL checking and for safety
    maybe something like "select sum( IsNull(field,0) ) from ...". Check the
    function ISNULL() in the manual.

  • How to differentiate capital budget and expense budget in BCS

    Hello all
    i had a doubt , your inputs are required.
    How to differentiate capital budget and expense budget in BCS
    Thanks
    Alok

    Hi ,
    As per the understanding that i can have from the inputs provided by you , you are moving ahead with a combination of Fund center and commitment item .
    Is it the case that for capital items your GL account would be diffrent as compared to the expense item .
    If that is the case then you can create different commitment item based on the GL and accodingly maintain the derivation strategy .
    Hope this suffices .
    Regards ,
    Dewang.

  • How to differentiate between 2 exceptions which are same(Ex: IOException)

    how to differentiate between 2 exceptions which are same(Ex: IOException)
    but occurring in 2 different functions(Ex: one in systemSoftwareProvisioning()
    and other one in provision() ). How to differentiate between them and in the
    framework how to catch both of them separately

    also use throwable.printStackTrace() method, this will point the line no. of the java file where the exception occured

  • ITunes randomly stops playing purchases that have previously viewed on the same hardware. It has an error message about HD. How can this issue be resolved?  What information is available besides the "learn more" option that does not deal with the problem?

    iTunes randomly stops playing purchases that have previously viewed on the same hardware. It has an error message about HD. How can this issue be resolved?  What information is available besides the "learn more" option that does not deal with the problem?
    Many people have the same problem. However, there is little or nothing readily available to users. This problem has existed for two or more years. Does anyone have anything to offer about this disturbing problem?

    Thanks for the suggestion kcell. I've tried both versions
    9.0.115 and 9.0.124 and both fail with the policy permission error.
    I also tried with and without your crossdomain.xml file but
    with the same result. It looks like this file is intended for URL
    policy, instead of socket policy. Recently Adobe separated the two.
    When I run with the files installed on my dev PC, it does
    work, which makes sense because the flash player isn't loaded from
    an unknown domain.
    I did get one step closer. If a crossdomain.xml in the server
    root exists and the socketpolicy file is loaded from the app folder
    then the first two warnings disappear. The logs now show:
    OK: Root-level SWF loaded:
    https://192.168.2.5/trunk/myapp.swf
    OK: Policy file accepted: https://192.168.2.5/crossdomain.xml
    OK: Policy file accepted:
    https://192.168.2.5/trunk/socketpolicy.xml
    Warning: Timeout on xmlsocket://192.168.2.5:843 (at 3
    seconds) while waiting for socket policy file. This should not
    cause any problems, but see
    http://www.adobe.com/go/strict_policy_files
    for an explanation.
    Warning: [strict] Ignoring policy file with incorrect syntax:
    xmlsocket://192.168.2.5:993
    Error: Request for resource at xmlsocket://192.168.2.5:993 by
    requestor from https://192.168.2.5/trunk/myapp.swf is denied due to
    lack of policy file permissions.
    Which basically says, everything is okay, but you stay out
    anyway.
    PS: I found the XML schema files here:
    http://www.adobe.com/devnet/flashplayer/articles/fplayer9_security_02.html
    and the socket policy schema:
    http://www.adobe.com/xml/schemas/PolicyFileSocket.xsd.
    UPDATE: When serving up the policy file on port 843 using the
    example perl script then the socket connection seems to be accepted
    and the connect succeeds. After that flex hangs trying to logon to
    the IMAP server.

  • How to differentiate whether user entered '0' or no value in the parameter?

    I need some clarification.On my selection screen I have 4 parameters( P_QTYLL,P_QTYUL,P_AMTLL,P_AMTUL). I have to check the values entered by the user in those fields and I have to display the user entered values in the next screen.My problem is if the user enters '0'(in any of the above fields) means '0' has to displayed in the next screen.But if he enters nothing means then nothing has to be displayed in the next screen.My problem is I am checking for '0', against the values(initial,'',space,0) for user entered value.But I am unable to differentiate the '0' and nothing(no value) even though I checked against the values(initial,'',space,'0').All the 4 conditions are treating both the '0' and 'novalue' the same.How to differentiate whether user entered '0' or entered nothing(no value).
    for example below is my code
    IF P_QTYLL EQ 0.
    P_QTY_LL = P_QTYLL.
    ENDIF.
    IF P_QTYUL EQ 0.
    P_QTY_UL = P_QTYUL.
    ENDIF.
    IF P_AMTLL EQ 0.
    P_AMTLL_S = 0.
    ENDIF.
    IF P_AMTUL EQ 0.
    P_AMTUL_S = 0.
    ENDIF.
    IF P_QTYLL EQ ''.
    P_QTY_LL = ' '.
    ENDIF.
    IF P_QTYUL EQ ' '.
    P_QTY_UL = ' '.
    ENDIF.
    IF P_AMTLL EQ ' '.
    P_AMTLL_S = ' '.
    ENDIF.
    IF P_AMTUL EQ ' '.
    P_AMTUL_S = ' '.
    ENDIF.
    LIKE THE ABOVE I checked against the values space,initial.But using those I am not getting any difference for no value and '0' .All the four values(space,initial,'0','') are treating both the '0' and no value in the same way.
    Thanks,
    Balaji

    hi,
    you said your teamlead doesn't want the type to be changed to 'C'.so try adding one dummy variable  of type c and pass your parameters value to this dummy variable and check  dummy variable for value '0'.
    eg:
    Data DUMMY(11) type c.
    DUMMY = P_QTYLL.
    IF DUMMY EQ 0.
    P_QTY_LL = P_QTYLL.
    ENDIF.
    DUMMY = P_QTYUL
    IF DUMMY EQ 0.
    P_QTY_UL = P_QTYUL.
    ENDIF.
    i think this will help you 2 some extend.

  • Does any one knows how to differentiate between outgoing mail and incoming

    Hi,
    I'm using the IV webclient inbox.
    Does any one knows how to differentiate between outgoing mail and incoming mail in the result list ?

    Hi,
    I'm using the IV webclient inbox.
    Does any one knows how to differentiate between outgoing mail and incoming mail in the result list ?

  • Looking for eMac: How To Differentiate Between Models Document

    Hello,
    I have been trying to find an Apple help document about how to differentiate between eMac models.
    I have found an article about iMacs, but can not seem to find one for eMacs. Here is a link to the iMac article, just so you can better understand exactly what I've been looking for:
    http://docs.info.apple.com/article.html?artnum=58669
    Does anybody know of a direct link to a similar article for all eMac machines? That would be amazing; thank you in advance for any help. =) *april

    Hello Dave =)
    Thank you for your help and for responding to my post.. The article you posted would have completely solved my problem, however, I, unfortunately, do not have access to serial numbers, and the serial number is mandatory for identifying eMac models in the article you posted. I appologize for not being more specific about exactly what I need.
    You see, I am looking on eBay for a good, used, possibly older eMac for my mom. Unfortunately, nobody puts serial numbers in their eMac listings, so I can not properly identify and price compare different eMacs. eBay sellers only list such things as Model Name, Processor Speed MHz, SDRAM and Hard Drive GB, so I need a list to 'check against' like the iMac document. I am mostly trying to find out which eMac models came with DVD players, and also which ones are AirPort ready and AirPort Extreme enabled etc.
    Would you happen to know if there's any such eMac model document?
    Thank you again for posting to my question; I do appreciate it. *april
    iMac 15" Flat Pannel 700 MHz PowerPC G4 1GB SDRAM   Mac OS X (10.3.9)   i love my little bubble computer

  • Indesign and bridge keep crashing how can this issue be resolved?

    Indesign and bridge keep crashing how can this issue be resolved?

    how can this issue be resolved?
    With your lack of info not at all. you have not even told us what versions of the programs much less any system info or other technical details.
    Mylenium

  • WHAT are tokens and how it is issued and how it is viewed and solved by who

    WHAT are tokens and how it is issued and how it is viewed and solved by who
    points will be awarded

    Hi Jagrut,
    If you are talking of support token then,
    TOKENs are nothing but the issues faced in the actual live system(Production).
    So the end user who is facing will raise it, it will be assigned to the production support team and they will solve it.
    Regards,
    Atish

Maybe you are looking for