How to disable a complete block using Forms Personalization

Hi,
I have a requirement in which I have to make the Vendor master form non-updateable when a particular supplier type is 'Affiliate' . For this I made the VNDR block as non-updateable in the when new item instance trigger. which solved the purpose. But when I navigate to the Bank Accounts tab of this form it is appearing as updateable and not only this , when I navigate to any other tab page from the bank Accounts tab then the complete form becomes updateable. I tried to make the bank accounts tab also as non updateable in the same trigger and a different trigger as well. but no sucess.
Please Advice.

Other great resources/examples are the following documents. You will need a My Oracle Support (formerly known as Metalink) account in order to access these documents, however.
Basing a Block on a Stored Procedure - Sample Code [66887.1]
Master/Detail Relationship Based on Stored Procedures [ID 124650.1]
Sorting Data Block Based On Stored Procedure [ID 283128.1]
Hope this helps,
Craig
If a response is helpful or correct, please mark it accordingly.

Similar Messages

How to disable the complete block on the selection screen

Hi,
I want to disable the complete block of selection screen when user checks on box...how shall i go about this?
I tried using block name as screen name and then modify screen but of no use..
Any Pointers...
Regards
Gunjan

SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-002.
PARAMETERS: box as checkbox USER-COMMAND ch.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETERS: path(150) MODIF ID id1.
SELECTION-SCREEN END OF BLOCK b3.
AT SELECTION-SCREEN OUTPUT.
IF box = 'X'.
    LOOP AT SCREEN.
      IF screen-group1 = 'ID1' .
        screen-active = '1'.
      ENDIF.
      MODIFY SCREEN.
    ENDLOOP.
ELSE.
    LOOP AT SCREEN.
      IF screen-group1 = 'ID1' .
        screen-active = '0'.
      ENDIF.
      MODIFY SCREEN.
    ENDLOOP.
ENDIF.
Hope it will work
Regards
Sugumar G

How to Call a form using forms personalization ?

Hi All,
We have a requirement where we need call a form when we tab out of a field from one form. How can we call a from using forms personalization ??
Can anyone state the steps or point to any metalink note.
Regards

Hi,
Please check whether following link help you:
http://oracleapps88.blogspot.com/2011/06/calling-another-form-parameters.html
Regards,

How can we disable Block Level Trigge using Form Personalization

Hi,
I want to disable block level trigger(WHEN-NEW-RECORD-INSTANCE) using forms personalization at responsibility level.
Can any one please give me the answer.
it's urgent
Thanks and Regards,
Dhana

No, Firefox is user choice rules over the "wants" of individual websites as far as disabling contextual menus and the keyboard commands.
Placing a transparent image over the image will keep the less technical user from saving the main image. If they do try to save it all they'll get is the transparent image overlay.

How to disable edit.delete in oracle forms 11i?

i was able to use APP_SPECIAL.ENABLE('EDIT.CLEAR',PROPERTY_OFF); to disable the clear button but also want to disable delete button,
i added the APP_SPECIAL.ENABLE('EDIT.DELETE',PROPERTY_OFF); in the pre_block and pre_query trigger but not able to disable the delete item from edit menu.
Am i doing sometjhng wrong?

Hi;
Please check
How to disable delete button in a form
How to disable delete button in a form
Regard
Helios

How to calculate sum of quantities of same item in po release using form personalization?

I am doing one form personalization in which an item can be entered multiple times in with different released quantity and need by date.
I want to calculate the sum of release quantity of items.
How I can achieve this using form personalization?
Thanks
Sunny

Hi Gayatri,
I'm not too sure why this isn't working as the logic seems correct.
Here's another way to do this:
1) Create another formula and place this on the Details Section:
whileprintingrecords;
numbervar x;
if onfirstrecord then
x := {Field_to_summarize}
else if {ExcisePur.ItemCode} <> Previous({ExcisePur.ItemCode}) And {ExcisePur.Batchnum} <> Previous({ExcisePur.Batchnum}) then
x := x + {Field_to_summarize};
2) Create another formula and place this on the Report Footer:
whileprintingrecords;
numbervar x;
-Abhilash

How to use form personalization to lunch concurrent program

Hi,
Now I am using the form personalization to lunch a concurrent program with global variables.But how to post the global variables to the program parameters.
Thanks and best regards
Fang
Edited by: 895910 on Dec 25, 2011 7:54 PM

Hi,
I have defined global variables using form personalization. But how should i launch a SRS Form to submit a request and pass the variables as parameters. What should the syntax be.
Thanks and best regards,
Fang

How to capture OK / Cancel Button response of warning type message in EBS D2K form using Form personalization

Hi Experts
We are working on one requirement in which on a standard D2K EBS form based on the response of a warning message we need to perform certain actions using Form Personalization.
The problem is that we are not able to capture response of OK and Cancel buttons of the warning.
If any one has come across such scenario, I would request to please share your valuable suggestions. 2898414
Thank You
Regards
Mirza Tanzeel

Figured out myself that this is mot possible using Form Personalization.
Only option possible is to try implementing by modifying custom.pll
Thanks
Mirza Tanzeel

How to create a new check box using form personalization.

Hi Frs,
I have a requirement to create a new check box in AP form using form personalization.
Pls help me in achieving this.
Note: we have to use only form personalization not custom.pll.
Thanks
Rajesh

Pl see ML Doc 420518.1(Limitations of Forms Personalization) for a list of things you cannot do with personalization - among them is creating new form objects such as checkboxes.
HTH
Srini

How to commit the PO form after each line using form personalization

Hi All,
I have a requirement, wherein we need to commit the Purchase order form, once a line is entered or before moving to the next line using form personalization.
Please assist me in getting it done.
Regards,
KR.
Edited by: 834152 on Feb 17, 2011 9:13 PM

Hi Sandeep,
Thanks for your response.
At the line level in the purchase order form, we have configured DFF with one field for train# and 14 fields for the container#.
In order to prevent the user from entering the same container# twice in the same PO. We need to save the PO on each line. So that when the user move to the next line, our program will check with base tables and confirm whether the entered container# is free to use or not.
Regards,
KR.

Call Another Form using Forms Personalization

Hi All,
I have created a Custom form using TEMPLATE.fmb and created functions in Apps and assigned to Responsibility etc and it all works OK.
Now, I need to call this Custom form from another seeded(PO form) Via Tools -> Menu.
using Forms personalization I can get the Menu Entry and Actions to execute the Form successfully from the PO Form.
BUT, I need it to automatically query records in my CUSTOM form based on my current PO_HEADER_ID value on my PO Form.
How can I do it ?
Do I need to modify my Block and add some parameters and then pass a value via Personalization ?
Please help !
Thanks
Shankar

Duplicate thread (please post only once).
calling Custom Form from Another Form
calling Custom Form from Another Form
Thanks,
Hussein

Capture who changed data using Forms Personalization & changed to what data

Dear All,
When the data is changed to a new data (say the price has been changed), I need to capture
a) the original data
b) newly changed data
c) who changed the data
into a newly created custom table using FORMS PERSONALIZATION.
How do I do using FORMS PERSONALIZATION?
Thanks.
Matthew

Hey guys, I did it.... and it does work. Here is what I did.
I created a table to capture the required data.
CREATE TABLE XYKA_PRICE_CHANGE_DTLS
LIST_LINE_ID NUMBER,
PRODUCT_ID VARCHAR2(240),
PRODUCT_ATTR_VAL_DISP VARCHAR2(4000),
NEW_PRICE NUMBER,
DIV_NAME VARCHAR2(240),
PRICE_CHANGED_BY VARCHAR2(6),
PRICE_CHANGED_TIME DATE,
OLD_PRICE     NUMBER
Create two procedures which needs to enter data into this XYKA_PRICE_CHANGE_DTLS table. We will pass values from FORMS PERSONALIZATION by calling this
procedure in the ACTION tab.
CREATE OR REPLACE procedure PRICE_CHANGE_DETAILS(price IN number,updated_by IN varchar2,disp IN varchar2,prod_id IN varchar2,line_id IN number,head_id in number,old_price in number) AS
v_name varchar2(240);
BEGIN
select name into v_name from qp_secu_list_headers_v where list_header_id = head_id;
insert into XYKA_PRICE_CHANGE_DTLS(NEW_PRICE, PRICE_CHANGED_BY,ITEM_NUMBER,PRICE_CHANGED_TIME,PRODUCT_ID,LIST_LINE_ID,PRICE_LIST_NAME,OLD_PRICE) values (price,updated_by,disp,sysdate,prod_id,line_id,v_name,old_price);
COMMIT;
END;
CREATE OR REPLACE procedure APPS.PRICE_CHANGE_DTLS(price IN number,updated_by IN varchar2,disp IN varchar2,prod_id IN varchar2,line_id IN number,head_id in number,old_price in number) AS
V_PRICE_CHANGED_TIME date;
V_PRODUCT_ID varchar2(240);
V_LIST_LINE_ID number;
V_count number := 0;
BEGIN
select count(*) into v_count from XYKA_PRICE_CHANGE_DTLS
WHERE LIST_LINE_ID = line_id AND PRODUCT_ID = prod_id AND NEW_PRICE = price;
if nvl(v_count,0) = 0 THEN
PRICE_CHANGE_DETAILS(price,updated_by,disp,prod_id,line_id,head_id,old_price);
else
null;
end if;
END;
In fact, I want to capture the current price and the changed price in pricing which is OPERAND field in qp_list_lines_v table (OM MANAGER > PRICING > PRICE
LISTS > PRICE LIST SETUP)
In the FORM PERSONALIZATION, enter the seq and the description
Seq          1
Description     GLOBAL_VARIABLE
Level          Function
     In the CONDITION tab
          Trigger Event          WHEN-NEW-ITEM-INSTANCE
          Trigger Object          LIST_LINES.OPERAND
          Processing Mode     Not in Enter-Query Mode
          Level               Site
In the ACTION tab
          Seq          1
          Type          Property
          Description     Operand Value
          Language     All
          Object Type     Global Variable
          Target Object     XX_EXIST_OPERAND_VALUE
          PropertyName     VALUE
          Value          ${item.list_lines.operand.value}
          Seq          2
          Type          Property
          Description     USER
          Language     All
          Object Type     Global Variable
          Target Object     XX_USER_ID
          PropertyName     VALUE
          Value          =fnd_global.user_id
Seq          2
Description     CONDITION & PASSING PARAMETER
Level          Function
     In the CONDITION tab
          Trigger Event     WHEN-VALIDATE-RECORD
          Trigger Object     LIST_LINES
          Condition     ${item.list_lines.operand.value} <>${global.XX_EXIST_OPERAND_VALUE.value}
          Processing Mode     Not in Enter-Query Mode
          Level               Site
In the ACTION tab
          Seq          1
          Type          Builtin
          Description     PASSING_VALUE
          Language     All
          Builtin Type     Exceute a Procedure
          Argument     ='begin PRICE_CHANGE_DTLS('''||${item.list_lines.operand.value}||''','''||${global.XX_USER_ID.value}
||''','''||${item.list_lines.product_attr_val_disp.value}||''','''||${item.list_lines.product_id.value}
||''','''||${item.list_lines.list_line_id.value}
||''','''||${item.list_lines.list_header_id.value}||''','''||${global.XX_EXIST_OPERAND_VALUE.value}
||''');end'
Click APPLY NOW button. Save it and the close this FORMS PERSONALIZATION. Go back to the navigation and then click on the module. Try changing the price.
Your current and the newly changed price along with who changed it, time etc will be inserted into XYKA_PRICE_CHANGE_DTLS table.
Edited by: e-brain on Sep 14, 2009 11:21 AM
Edited by: e-brain

Sum of the fields in SO form using Forms personalization

In sales order form, Once we enter the item and qty in a line . The qty entered should be multiplied by volume of an item avaiable in mtl_system_items_b and should be displayed in the line level DFF(attribute14). Thus we get the line level Volume
Once n number of lines are entered in SO form . The sum of line level volume should be displayed in the header level DFF(attribute14.
I am able to get the Line level volume using global variable.
Could any one please let me know is it possible to get the sum of line level volume in the header DFF using forms personalization.

My requirment is to get the "Line level volume" information in line level DFF and "order level volume" information in header level DFF of a Sales Order form.
line level volume = unit_volume*quantity
Order level Volume = sum of n number of line level volumes = line level volume of line 1.1 + line level volume of line 1.2 + line level volume of line 1.3 ......
For Example consider an item 2E00001010 item. The volume of this item is mentioned in the physical attributes of an item. we can get the volume of this item from unit_volume in mtl_system_items_b . say for example the unit_volume of this item is 20 litres.consider another item 2X000X101 and unit_volume is 15 litres.
Now in sales order in line 1.1 i have entered an item 2E00001010 and quantity as 10. In line 1.2 i have entered an item 2X000X101 and quantity as 10 and saved the sales order.
1.1 line level volume = 20*10 = 200
1.2 line level volume = 15*10 = 150
Order level volume = 200 + 150 = 350
So as according to the requirement in
1.1 line level DFF(LINE.ATTRIBUTE14) 200 should be displayed .
1.2 line level DFF(LINE.ATTRIBUTE14) 150 should be displayed.
In header level DFF(order.attribute14) 350 should be displayed.
By using below forms personalization i am able to get the Line level Volume information displayed in Line level DFF(Line.attribute14)
seq 10
description : Line Level Volume
Trigger event : when-New-Item-Instance
Trigger Object : Line.Ordered_quantity
Level : Site
Action Seq: 10
Type: Property
Object Type: Global Variable
Target Object: XX_VOL
Property Name : Value
Value = =SELECT to_char(nvl(Unit_volume,0)) from mtl_system_items_b where segment1 =:line.ordered_item_dsp and organization_id = 89
Action Seq: 20
Type: Property
Object Type:Item
Target Object: LINE.ATTRIBUTE14
Property Name: Value
Value = =to_number(:global.XX_VOL)*:line.ordered_quantity
I would be glad if any one could let me know how to get the Order level volume and get displayed in the Header level DFF(order.attribute14) using forms personalization.

Launch orcale cz configurator using form personalization

Hi All,
We are trying to launch oracle cz configurator using form personalization ,can anyone tell me what are the paremters to be passed to the configuartor ,currently we are passing parameter from launch a function for a model as :
='database_id='||'dvoa083'||'&icx_seesion_ticket='||'F06E20B60E01E1F5DAC03223D56B3230'||'&ui_type='||'JRAD'||'&ui_def_id='||39980
but the page is giving null pointer exception:-
## Detail 0 ##
java.lang.NullPointerException
     at oracle.apps.cz.runtime.oa.server.CZApplicationModuleImpl.setPageController(CZApplicationModuleImpl.java:785)
     at oracle.apps.cz.runtime.oa.webui.AbstractMainPageController.processRequest(AbstractMainPageController.java:261)
     at oracle.apps.cz.runtime.oa.webui.MainPageController.processRequest(MainPageController.java:64)
Regards,
deb

Can you post complete init message sent to the CZ Servlet URL? Can you try it in standalone mode? Can you try after clearing cache/cookies?

Create SPECIALXX_CHECKBOX menu using form personalization

How to create SPECIALXX_CHECKBOX menu using form personalization?

You should ask that question in an eBusiness-related forum, maybe here OA Framework

How to disable a complete block using Forms Personalization

Similar Messages

Maybe you are looking for