How to disable a CPU on a UCS C220 server

Hello Experts ,
Would anybody help if there is a way to disaable a CPU on a UCS C220 server ?
Is there a jumper that is used for this purpose ?!!
ASAP
Thanks guys

Short of removing the physical CPU I don't believe there's any other way to "disable" it.  Removing the CPU will also render it's memory banks (usualyl 1/2 the DIMMs) inaccessible to the system.
What reason to have for requiring to disable it?
Regards,
Robert

Similar Messages

  • How to disable the Directory listing for the whole server or a particular a

    Please let me know how to disable the Directory listing for the whole server or a particular application.
    Thank You

    I want to disable the tab focusing( tab index) for a JTextField objectsLook through the API and find methods with the word "focus" in the method name.
    Also can u tell me about how to change the tab index orders for JTextFields."How to Use the Focus Sub System":
    http://java.sun.com/docs/books/tutorial/uiswing/misc/focus.html

  • How to disable one email account in iPlanet Messaging Server 4.5

    Hi,
    Any one can tell me how to disable a single user in iPlanet Messaging Server 4.5.
    Thanks
    Abid

    I wonder what product you're really talking about.
    There was never a product called, "Netscape Messaging Server 4.5". There was 4.1 and 4.15, but the next product was 5.0.
    These are all long discontinued, and nobody should be using them anymore.
    Assuming it's 4.1, check your ldap record for "inetuserstatus" and set it to "disabled", or even "deleted"

  • UCS C220 server power button turns "Amber"

    Hi All,
    We have a UCS C220 server on which we are running CUCM 9.1 and CUC 9.1 and all of a sudden the server's power button turns amber and everything goes down. We would have to physically turn on the power button and access the VMware and start all the services.
    Please advise.
    Regards
    Bhavna

    Hi, I have the same issue, I just install a new clean CUCM 9.1 and CUC 9.1 in UCS C220 with pre-installed esxi 5.1, I leave the clients site the last Friday and today say to me that the servers is down, just turn on the server and everything comes back, in the vmware logs the only error that show is "2014-05-18T15:31:00.802Z [3DAE2B90 error 'SoapAdapter.HTTPService'] HTTP Transaction failed on stream TCP(error:Transport endpoint is not connected) with error N7Vmacore15SystemExceptionE(Connection reset by peer)" but I saw that error in the log before I installed this site the last May 5, anyone have a clue of what I have to look. Of if this error could do a crash or reset in the system.
    Thanks in advance.
    Cesar

  • Unable to find ctrl+H message in UCS C220 Server

    Hi,
    I am unable find Ctrl +H message at the time of booting to get enter in Webbios.
    Please help me.
    Hardware: UCS RAID SAS 2008M-8i
    Rgds,
    Sambhab

    What firmware are you running on this server?
    Did you buy this raid controller direclty from cisco or from a partner.
    Based on the screenshot you provided the firmware on your controller looks very old,  I recommend that you use the HUU to upgrade the firmware of the adapter to the same level as  your server. Use link below to download the firmware package for your server.
    Cisco UCS C220 M3 Rack Server Software
    http://software.cisco.com/download/release.html?mdfid=284296253&flowid=31742&softwareid=283850974&release=1.5%283d%29&relind=AVAILABLE&rellifecycle=&reltype=latest
    Example Video of firmware upgrade.
    http://www.youtube.com/watch?v=qRahHRja15M

  • Long beep sound in UCS C220 Server

    Hello All,
    We have recently upgraded our CM server from MCS to UCS C220. All is working well since 3 weeks. However, since the past three days the UCS server is giving long beep sounds. In the CIMC console its showing as Severe Fault and in Storage Slot 1 and physical Drive 2, the status is "Foreign Configuration" and Health status is "Moderate Fault". However, when we check the status of the light on  the physical drive, its still green and not amber. So is it there a problem with the Harddrive?
    Pls find the screenshot attached.

    Hey there. I don't think you'll get a reply on this forum because it looks like this is a fault on the UCS server itself, and not on the Unified Communication application that runs on the UCS server. Please re-post this discussion to the board which discusses UCS servers. You'll get a reply there.

  • How to disable or hide header row in appliction server

    hi,
    I need disable my header row in applicationserver(outbound)(i s nothing but first row),
    how to do , plz any one explain me with code.
    my requeriment is in my selection screen input as file name , field sprator and headerrow .
    in header row if user give option yes or no, if yes means we have to display header row in applicion server
    if they entred no menas we have to disble header row.
    ex: appliction server outpurt  like below;
          aaaaaa         bbbbbbbbbb  cccccccccc  ddddddd    -
    > this is header row , i need to hide
         11 111           2222222       3333              4444
          55555            777777           8888            9999
    i need display in appliction server from 2nd row on wards.
    plz any one know reply me as soon as possible

    Hi Sara
    I doubt if there is any way where you can hide or disable the header row for the existing file in the application server.
    What you may perhaps do is, process the desired output in the program, in such a way that as per the value in the checkbox( whether selected or not) you may delete the first row from the internal table which has the header data from the incoming file.
    Something like this:
    LOOP AT itab INTO wa_itab.
       IF ck_box  = 'X'.
          CLEAR wa_itab.
          MODIFY itab FROM wa_itab INDEX sy-tabix.
          EXIT.
       ENDIF.
    ENDLOOP.
    Let me know if you need any further help on this.
    Harsh
    PS:
    1) An empty first line will appear in this case.
    2) Check the code in a test program first.

  • How to disable SNI on Windows 2012 ADFS server?

    Hello,
    Could you please let me know how to disable the SNI in Widnows 2012 ADFS Server.
    Wanted to configure the NetScalers as both proxy and load balancer for ADFS.
    Regards
    Jay

    https://www.sslshopper.com/article-how-to-disable-ssl-2.0-in-iis-7.html
    Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

  • Continuous Beep sound on UCS c220

    Hi Guys,
    We just got a new UCS c220 server, we were deploying Esxi on it and all of a sudden it started alarming a beep sound and it is continuous, there are no logs generated either CIMC nor the led indications, what might be the possible reason, an inputs would be helpful, thnx in advance
    Regards
    Krishna

    Udupi,
    As Dan stated, it might be an issue with your RAID. In the past, I have experienced similar beeping when there was an issue with the RAID group. Except for the LSI controller, I'm not aware of any other componentt that would continuously beep on the server during operation
    http://www.cisco.com/en/US/docs/unified_computing/ucs/c/sw/raid/configuration/guide/MegaRAID.html#wp1105151
    Table 5-3 gives a translation between the beep intervals and potential issues.
    If you can reboot and interogate the LSI OptionROM during POST, you may find what it is complaining about
    Table 5-3     Summary of LSI MegaRAID Card Beep Codes
    Beep Code
    LSI Firmware State
    Cause (Depending on RAID Level)
    3 seconds on, 1 second off
    SPEAKER_OFFLINE_ENTRY
    •RAID 0: One or more drives offline.
    •RAID 1: Two drives offline.
    •RAID 5: Two or more drives offline.
    •RAID 6: More than two drives offline.
    1 second on, 1 second off
    SPEAKER_DEGRADED_ENTRY
    •RAID 1: A mirrored drive failed.
    •RAID 5: One drive failed.
    •RAID 6: One or two drives failed.
    1 second on, 3 seconds off
    SPEAKER_HOTSPARE_ENTRY
    A hot spare drive has completed the rebuild process and has been brought into the array.

  • HOW TO DISABLE CPU behavior when no battery inside macbookpro ?

    I realized, when i do not have the abttery inside the macbook, what i do not fotne, to save chargecycles, that my cpu wil not go above 1ghz. i observed this with the use of the coreduotemp application, wich can be free downloaded and monitors temperature and cpu speed of your macbook. i wrote to the developper, and he confirms that observation, so it is not an software bug.
    First, i invite you to test this on your macs and report, and secound i would like to have a solution, i bought this mac for power, not for slow power.
    maybe someone knows how to disable this behavior, thx

    If your MBP is consistently running at 80°C or higher, there is probably a problem with it... My machine idles around 54°C (when connected to an external monitor -- less without) and maxes around 75°C when the processor and GPU are being pushed (i.e. video intense gaming).
    Additionally, the MBP's battery is not Lithium Ion -- it is Lithium Polymer -- and is designed to be used IN the laptop. You are worrying about nothing (or next to nothing); even if your theory is correct, you are perhaps talking about a 5% decrease in the overall lifespan of the battery...if you think that is worth the possibility of data loss, then I guess running without the battery is for you...
    However, you will not be able to disable the down-throttle of the CPU speed.

  • How to disable ThrottleEvent slowing down

    Hi,
    I am making original media player using OSMF 2.0.
    But, I have a problem with my media player when ThrottleEvent fired (moved to hidden tab on browser), the video's sound skips.
    I read references, and this article http://help.adobe.com/en_US/as3/mobile/WS4bebcd66a74275c36cfb8137124318eebc6-8000.html ,
    but I couldn't find how to disable the minimizing CPU usage feature on Flash Player, or simply playback video without sound skips.
    Some video player like YouTube doesn't have the same problem, I think there is a solution for this problem.
    If anyone know the answer, please let me know.
    Thanks

    SOLVED.
    I increased stage framerate to 60 fps, the problem not occured anymore.
    I have set my stage framerate as 1 fps before so that the video's framerate itself doesn't matter stage framerate.
    Then, I increased the framerate to 15 fps sound better, and 30 fps almost fine, 60 fps doesn't have any problem.
    Thanks for reading,, and I hope this will help someone in the near future.

  • How to disable proftpd on solaris 8

    Hi,
    How to disable proftpd from the server on solaris8? there is one process running on box named
    /usr/local/sbin/proftpd -q -n -c /usr/local/etc/test-ftp.conf.
    thx

    Hi
    From much personal experence I can assure you that if you have a Solaris 8 server
    and it meets the hardware requirements specified by Oracle (i.e. RAM, CPU, DISK)
    Then you dont need to patch the O/S. Oracle 8.1.7 will install.
    However I strongly recommend that you patch the Oracle installation to 8.1.7.4
    afterwards.
    If I can be of any help please feel free to mail me at the address below. I'll try and keep an eye on this track though.
    Best regards
    Ade
    [email protected]

  • How to disable Mozilla yellow strip, reminding us constantly to "update a plugin", which we don't want to update. Details (RE: Flash) below: bobgorg@ymail

    Hello, how to disable the long horizontal Mozilla yellow strip, popping up and reminding us constantly to "update a plugin", which we don't want to update.
    Disabling the ones below:
    1/ plugins.update.notify User;true
    2/ plugin.scan.plid.all;true
    3/ dom.ipc.plugins.enabled;false
    either does not help or disables completely Flash! What else to do with this ultra annoying "Update plugins" reminder, as we want to keep the older version 10 of Flash? We just do not want Flash v. 11 - it takes huge amount of CPU, while Version 10 works fine for all 'you tube" and "etc"... videos. No need for V.11. (Let us worry about viruses and security) But here it comes the so annoying Mozilla reminder to upgrade to Flash Version 11 - the yellow strip also takes screen space under the address bar. Please help. Very annoying - almost ready to switch to other browsers if this issue is not resolve. Other than that, the Mozilla 14 is great. Congratulations to all designing it. Thanks in advance. Bob
    Please respond: [email protected]

    Hi,
    You can try to set '''plugins.hide_infobar_for_outdated_plugin''' to true in [http://kb.mozillazine.org/About:config about:config].
    [http://kb.mozillazine.org/About:config_entries about:config Entries]

  • How to disable processors

    Hi all,
    I use a full system simulator simics to boot sun solaris os and do some research on it. Now I have no idea how to disable a specified cpux after the system is booted. I have tried to use "psradm -f ID" to disable the cpuID. However, it seems that the processor won't be totally removed and after cycles running the system may latter crash. The reason I guess is that some tasks are still load onto that disabled processor.
    I also found the asr-disable is good enough for some platform such as v440/v880. However I just got the sarek simulation environment, so I wonder whether there will be similar commands to totally disable the specified cpu so that the OS would not schedule any task or process to that processor.
    Sorry for such silly questions. I just want to advance my researches.
    Thanks in advances!
    yihui

    Thanks for your reply.
    Simics has the function of completely disabing any processor in simics. The reason why the system crashed later is that the OS do use the offline core to do some work, which is assumed in simics that the core is totally disabled. Therefore, the task in disabled core would not be processed and the system finally crashed.
    So I just want to completely disable a specified core so that OS would not allocate any tasks to that core in the subsequent running of the system. Is there any good ideas?

  • How to disable Windows 7 warning on Super-charger.exe?

    Hi,
    I buy a computer from ZT systems. The CPU is: AMD Quad-Core A8-3850 Accelerated Processor, Video graphics is:Radeon™ HD 6550D processor-integrated graphics (Dual monitor capable). From the CD-rom I know the motherboard is from MSI. I reinstall Windows 7 in order to have dual boot capability. I find that every time the computer boots, it asks whether run Super-charger.exe for security. I have check it is safe from "Program Files(x86)\MSI\Super-Charger.exe security property dialogue box (SYSTEM: Full control, Modify, Read & Execute, Read, Write). It still asks every time it boots.
    Could you tell me how to disable Windows 7 asks about Super-Charger security?
    Thanks

    Quote from: Panther57 on 19-April-12, 10:29:56
    In Bios possibly check your boot order? 1st, 2nd, 3rd etc.
    I don't see any help from boot order.
    BTW, How can I know the motherboard model? I bought this computer from Costco. The information I have is: ZT Affinity 7150Ma Desktop PC. I do not find further info from ZT Systems Inc. website.
    Thanks.

Maybe you are looking for