How to disable alarm on a T5120?

Hey all.
I have a Sun T5120 and when the OS boots up, a loud piercing alarm goes off. The alarm starts during the boot-up phase:
event = 12e Array Config has been changed.........
I just don't know how to disable this alarm sound.
any help is greatly appreciated.
Thank you.

Moderator Action:
This post has been moved to the Sun Servers HARDWARE discussion space,
from the Solaris discussion space, for proper topic alignment.
You appear to have a hardware alarm issue, not an OS issue.
I would presume that this topic is readily mentioned in the system documentation.
That documentation for your T5120 is here:
http://docs.oracle.com/cd/E19839-01/index-de.html
(You should bookmark that link and also download all the PDF's for future reference.)

Similar Messages

How to disable alarms when iCal is off

Hi all,
I might be missing something here, but I believe there used to be two settings to turn off alarms in 10.4 and 10.5:
1) disable all alarms
2) disable alarms when iCal is off
Did option 2) disappear in 10.6? I am really missing this feature.
Thanks for your insights

I too would like to know a way around this problem. In the prior version of iCal, you could enable alarms only when iCal was running. I routinely sync three computers, sometimes hours to days apart. So unless I remember to turn alarms off prior to shutting down the machines, the alarms are not properly updated upon syncing when an idle machine is turned back on.
Hope this makes sense. Either way, it would have been better if Apple had not gotten rid of this feature in the new iCal.
Eddie

How to disable the vibration feature for the Alarm?

How to disable the vibration feature for the Alarm?

Hi guys , because we have no answer to our issue how to take off the vibration when alarm is on , and our other profiles like ringtones, messages , reminders and so on we need to keep them on vibrate mode , the best solution is to install a free application from store called "alarmed " ; I did put it down on my phone and now i can use the alarm clock without any vibration at all ! That's the answer to our issue , before Apple is going to find a solution !
Personally , I don't think is going to be fix it soon , as long as the apple script made for pop ups is general one !
Good luck everyone

How to disable this Alarms?

My two WAE have following alarms and donnot know how to clear it.
A. core_dump sysmon core
B. eth_bypass sysmon/eth2 InlinePort 1/1/wan
eth_bypass sysmon/eth3 InlinePort 1/1/lan
eth_bypass sysmon/eth4 InlinePort 1/0/wan
eth_bypass sysmon/eth5 InlinePort 1/0/lan
WAE - A : A Inline mode WAE.
I have delfile /crash/* and reload WAE many times , but alarms still show on Central Manager.
WAE - B : A Wccp mode WAE , and inline card donnot use for half year.one week age,central manager show this alarm,I know inline card 's four port is bypass.because is use wccp.How to disable this alarms.

Hi Ivan,
See if this helps:
A: Is there anything in the following directories?
/local1/core_dir/
/local1/crash/
If so, you will continue to get the Alarm until it's removed.
B: Are you using WAAS 4.0.19? If so, your inline alarm might be CSCsl62873, which is fixed in 4.0.21 or 4.1.1 or remove the card if it's not being used.
Hope that helps,
Dan

I have just upgraded to an iphone 4s and whenever I receive a message ,notification or the alarm goes off the camera flash goes of as well. Does anyone know how to disable this. No one else I know with this phone has this happen

I have just upgraded to an iphone 4s and whenever I receive a message ,notification or the alarm goes off the camera flash goes of as well. Does anyone know how to disable this. No one else I know with this phone has this happen

Settings>General>Accessibility>Hearing>LED Flash for Alerts>On/Off.

Disabling alarms for just one calendar

I have two calendars on my iCal. One is synced with MobileMe, the other is a Google calendar. The alarms work fine on both but I would like to disable alarms on just the Google calendar while leaving alarms operational on the other, MobileMe calendar. How do I do this?

Right-click on the respective calender in the list, choose Information. In the info window you should find the possibility to check/uncheck the reminders for this calender.

How to disable parent window while popup window is coming

Hi,
I am working on Oracle Applications 11i.
I am able to get the popup window using the Java script in the controller.
Please see the below code for the reference.
String pubOrderId = pageContext.getParameter("orderId");
StringBuffer l_buffer = new StringBuffer();
StringBuffer l_buffer1 = new StringBuffer();
l_buffer.append("javascript:mywin = openWindow(top, '");
l_buffer1.append("/jct/oracle/apps/xxpwc/entry/webui/AddAttachmentPG");
l_buffer1.append("&retainAM=Y");
l_buffer1.append("&pubOrderId="+pubOrderId);
String url = "/OA_HTML/OA.jsp?page="+l_buffer1.toString();
OAUrl popupUrl = new OAUrl(url, OAWebBeanConstants.ADD_BREAD_CRUMB_SAVE );
String strUrl = popupUrl.createURL(pageContext);
l_buffer.append(strUrl.toString());
l_buffer.append("', 'lovWindow', {width:750, height:550},false,'dialog',null);");
pageContext.putJavaScriptFunction("SomeName",l_buffer.toString());
But here the problem is, even though popup window is there, i am able to do the actions on the parent page.
So how to disable the parent page, while getting the popup window.
Thanks in advance.
Thanks
Naga

Hi,
You can use javaScript for disabling parent window as well.
Refer below link for the same:
http://www.codeproject.com/Questions/393481/Parent-window-not-disabling-when-pop-up-appears-vi
--Sushant

How to Disable "Auto Align" in [System Pref.] - [Display] - [Arrangement]

Does anyone know How to Disable "Auto Align" in [System Preferences] -> [Display] -> [Arrangement]?
It always want to align the two screens from the top when they are lined up close together and I need them to be aligned from the bottom. Since the resolution heights are so close together (1080 & 1050) it does not allow one to align side by side from the bottom as it prioritizes top alignment.
I guess I'm looking for a script to disable this feature.

Anyone got any ideas?

How to disable the "turn page" event triggered by the scroll/swipe function?

The problem is as follows.
The default behaviour of Acrobat Reader (both stand alone and browser plug-in) is to allow scrolling/swiping with the mouse wheel/trackpad. This is useful when the pdf's page length is greater than the screen's own length, because you can read the pdf with no need to distract your attention from the text to the scrollbar button. However, the same scroll/swipe function turns into a usability problem when the pdf is embedded in a html page and the pdf's page length is smaller than the browser's length. In this case, the scroll/swipe turns the page, distracting your attention from the text to the unintended behaviour of the browser. What happens is that you are so used to scrolling/swiping that you did it unintentionally in the pdf's caption area. You really did not want to turn pages in the pdf. Furthermore, if the pdf takes the whole html page, being a website, the scroll/swipe function flips the website pages in ways that neither the reader nor the writer had ever intended. Hence the question. How to disable, in this case, the "turn page" event triggered by the scroll/swipe function? A JavaScript should do, but the SDK documents did not help so far...
Message was edited by: 41457173
Message was edited by: 41457173

... or release a patch for the API,
... or suggest an alternative route to achieve the intended result.

[Forum FAQ] How to disable Microsoft account default sign-in behavior when accessing Microsoft website on Windows 8.1

Scenario
By default it will sign in with current Microsoft account, if a user accesses Microsoft website (www.live.com, www.bing.com, etc.) with Microsoft account on Windows 8.1. This article describes how to disable this default sigh-in behavior if you want to use
different Microsoft accounts every time.
Method
To disable this default sign-in behavior, we can deny current Microsoft Account read permission of MicrosoftAccountTokenProvider.dll, please follow the following steps:
Run Command Prompt with elevated permissions.
Run the following command to take ownership of MicrosoftAccountTokenProvider.dll:
  takeown /f C:\Windows\SysWOW64\MicrosoftAccountTokenProvider.dll
Run the following command to deny the read permission of the Microsoft:
icacls C:\Windows\SysWOW64\MicrosoftAccountTokenProvider.dll /deny
[email protected]:r
Note: Please replace your current Microsoft Account with the example
[email protected]
Change the owner of this file back to TrustedInstaller:
Right-click MicrosoftAccountTokenProvider.dll under
C:\Windows\SysWOW64\, choose Properties. Under
Security tab, click Advanced.
Click Change, in the box Enter the object name to select, type
NT Service\TrustedInstaller.
Click OK.
Note: This operation would take some hours to work.
Apply to:
Windows 8.1
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Error: System cannot find the specified path
I am getting this eroor
Parashuram Singade www.distinctnotion.com

How to disable airplay mirroring on iPad with ios7

How to disable airplay mirroring on iPad with ios7?

I've had this problem ever since I was at my friend's house- she has Apple TV- and my iPad connected automatically. So, I have no idea why any of the practical solutions that people think of are not options BUT, in terms of just getting it done, I did figure out a way. The key for me was getting near another Apple TV. I was out of town so I took my iPad to another friend's house who also has TV. Once I was logged onto their wireless network (the same network that their Apple TV is on-- that's how it connected in the first place), then the Airplay icon and options showed up from the bottom-draw menu and I was able to make sure that mirroring was turned off from the Apple TV section and to make sure the selection was on iPad instead. Problem solved. Now whether or not this will stay the same (rather than me having to make sure it stays at this setting everytime I link up to a network that has an Apple TV on it) I don't know. So my advice is find someone with Apple TV and connect to their network with your iPad and then change it.

I have changed the apple ID (email, but on my iphone , the icloud is stil asking me to log in whit the old email.And it is poping-up on every 10 seconds.I never used icloud, and i dont want to use it.I just dont know how to disable the icloud.

i have changed the apple ID (email) but on my iphone , the icloud is stil asking me to log in whit the old email.And it is poping-up on every 10 seconds.I never used icloud, and i dont want to use it.I just dont know how to disable the icloud.

If you see that pop up you enabled icloud. Whether you want or do not want now to use it irrelevant until you actually disable activation lock.
In order to do that you have to change your apple id back to do that just long enough to sign in and back out. System will ask you to verify, don't.
Just sign in on the prompt you getting and then logout. Once done, change apple id to what you have now and verify. Then decide if you want to
use icloud (who does not want to be able to track their phone if lost or stolen).

Can't use down key because it opens automator. Does any one know how to disable this short cut?

Everytime I press down on down key it opens automator. It doesn't let me delete the app. I don't know what to do, it is very frustating to fill in a chart when I can't use the down key. Does any one know how to disable this short cut?

Are you talking about the Down Arrow key? To my knowledge there is no way to use that key as a shortcut for anything. But look in the Keyboard section of System Preferences and the Keyboard shortcut tab.

I need to know how to disable my apps on my old system so that I can install them on new computer.

I've just purchased a new iMac and need to know how to disable my apps on my old system so that I can install them on the new one.

You are allowed to have two working installations so you do not have to disable the original if you prefer to have a backup. Otherwise, to disable you can just sign out thru the CC manager.
Creative Cloud Help / Sign out, Sign in | Creative Cloud desktop app
http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

How to disable a Entire row in a Matrix in Find Mode (User Form)

Hi,
How to disable a Entire row in a Matrix in Find Mode (User Form)
Regards
Jambu

Hi,
Iam using Bubble event = false in click event but the matrix row
is allow to edit but we cant save the document in Find Mode That is fine.
What is my actual requirement is In find mode matrix Row not allow to enter the data .
For examble In ADD mode i enter the data in Three rows (Item Section - Matrix) and
save the document. Whwn i open the document in find mode the three row is not allow
to editable like the same functionality of PO, sales Order, etc ..
Regards
Jambu

How to disable alarm on a T5120?

Similar Messages

Maybe you are looking for