How to disable anoying and slow stamp brush preview? CS5

Hello,
i have this problem in Photoshop CS5
as always, with nev version we got new features which nobody needs and slow down the performance... and/or workflow
for example: anoying preview under the stamp brush, which is unbelievably slow and cannot be turned off
next thing is brush shape preview, i often use large brushes and i need to see the whole shape, not just one quarter of the brush, please change that
thanx

If not for the new features, why upgrade Photoshop?
You have video driver problems. You are also likely wrong that OpenGL Drawing is turned off on your system, assuming by "stamp brush preview" you mean the overlay preview inside the brush for the Clone Stamp tool, because with OpenGL disabled you wouldn't be seeing that overlay. Keep in mind that when you make OpenGL changes in the Edit - Preferences - Performance menu you should close Photoshop and reopen it.
Why do things work differently in CS5? The simple answer is that Photoshop demands more of the video drivers than its predecessors. And your computer / software setup isn't up to the task.
Chances are it can work better... Download the latest driver for your nVidia video card. http://www.nvidia.com/Download/index.aspx?lang=en-us
By the way, the Clone Stamp overlay (assuming that's what you're describing as the "stamp brush preview") is not "unbelievably slow" on most peoples' systems - it's perfectly interactive and a real help. To turn off the Clone Stamp overlay, choose Window - Clone Source, then uncheck the [ ] Show Overlay setting.
-Noel

Similar Messages

How do you date and time stamp iCal entries? We share an event calendar and need to know when a new event was entered into iCal.

How do you date and time stamp iCal entries? We share an event calendar and need to know when a new event was entered into iCal.

BKBK,
Thank you for your response. That does adequately cover the
client-originated sessions, but still leaves the ability I am
looking for unavailable.
It did serve to definitively answer my most pressing
question, however, with this statement:
Note: ColdFusion cannot create a session if an initiator
application uses a SendGatewayMessage method to start an
interaction with a client, such as an SMS user. In this case, the
sending code must keep track (for example, in a database) of the
messages it sends and their destinations. When a response event
arrives, it can look up the origniatorID to determine whether it
was in response to an outgoing message.
I will play around with the Application scope to see if there
might be a workable solution there.
RLS

SharePoint 2013 How to disable Drag and Drop Functionality

Hi,
In SharePoint 2013 in document library we have default behavior of drag and drop documents in document library. How to disable drag and drop documents in document library?

Hi,
As a work around, you can edit the Drag and Drop js as to remove the drag and drop functionality, edit the document library page (default
page) place the content editor web part on top of the library include the modified Drag and Drop js file in the content editor web part, Please save the Drag and Drop js file to other location (probably Site Assets library etc).
Hope it helps!!!
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. Thanks, Ajeet

How to disable SSLv3 and RC4 on Lync Server Access Edge?

We use Lync Server 2013.
How to disable SSLv3 and RC4 on Lync Server Access Edge?
This solution https://technet.microsoft.com/en-us/library/security/3009008.aspx doesn't work

Hi dizen,
To completely disable RC4, you can create the following registry key:
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Ciphers\RC4 128/128]
"Enabled"=dword:00000000
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Ciphers\RC4 40/128]
"Enabled"=dword:00000000
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Ciphers\RC4 56/128]
"Enabled"=dword:00000000
For more details, please check out this KB.
http://support.microsoft.com/kb/2868725
Best regards,
Eric

How to disable the "autoload" of pdf in preview and url in Safari

I hate that new feature,
How can i disable the "resume" of pdf in preview and url in Safari on every time i restart those prg?

Sorry Noel - create an extended desktop and open photoshop - create a file the same size as your second monitor and drag it over to the second screen. Press F to make it full screen and Ctl 1 to make it actual pixels. We now have just what we require for projection mapping onto say a building assuming the second monitor is a projector. Now take a brush and stamp it in the middle of your page - which is on the second monitor, photoshop itself is on your Ist monitor. If you press hold Shift down and stamp your brush at the edge of your full page you will see it jump too the side. It will also do this if you try to drag a selection too close to the edge. The page will begin to scroll to accomodate the selection which is perhaps useful in some circumstances but in others like to projection map it is a horror because we need the page to remain exactly where it is at all times or it will no longer be `registered` to the architecture previously done. Beleive me
this can be deeply frustrating when you are out in the cold trying to get all the facets of a building mapped, but even when in the warm trying to do it with a theatre set.
Should you have a solution then you would indeed become much revered in these parts - best wishes John --
a couple of mapped buildings done with this method below
http://vimeo.com/31496197 ness chrurch
http://vimeo.com/17762125 xmas lights

How to disable Save and SaveAs Button in Adobe Reader ??

I am having Dynamic XML Form (XFA based) designed on LC Designer ES2
I Want to disable Save and SaveAs button whenever it would be opened in Adobe Reader only.
Other way around, i want to provide only facility to save form programmatically through Javascript to apply validation.
Plz help
Thnx in advance..!!

I can apply folder level java script ...But How to handle this way on CLIENT SIDE..???

How to provide date and time stamp to the extracted file.

I 'm downloading data from DB to Flat file using GUI_DOWLOAD. whenever it is executed it is creating with a file name.
if i rerun the program the file is overwriting with the same name.
now based on the requirement how many times i executed, that many times file should be individually created and should be added with date and time stamp.
like
if when i executed at the very first time it should saved with filename, date and time.
say "Address.txt 04/05/2007 07:55:10"
When i executed it for second time it doesn't overwrite the file.
it should create a new file.
like "Address.txt 04/05/2007 07:59:20".
Please guide me the way if possible code.
Thanks in advance.

Hi Vamsi,
               Use FM 'F4_PROGRAM' to take file from the user .
In this case user will enter the file name. u can append date & time to that file path.
Refer this code.
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      PROGRAM_NAME = SY-REPID
      DYNPRO_NUMBER = SYST-DYNNR
    IMPORTING
      FILE_NAME     = P_P_FILE.
concatenate P_FILE '04/05/2007 07:59:20' into V_FILE.
CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
      filename                        = v_file
     filetype                        = 'ASC'
      write_field_separator           = 'X'
    TABLES
      data_tab                        = i_tab
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF sy-subrc = 0.
    MESSAGE i002.
ENDIF.
Reward points if helpful.
Regards,
Hemant.

How to disable drag and drop feature for a document library?

Hi
How can I disable drag and drop feature for a document library? Do I have an option to disable it from the SharePoint's feature set?
Or can I disable it using a script? If so, how?
Regards
Paru

Hi,
According to your post, my understanding is that you want to disable drag and drop feature for a document library.
Drag and drop in SharePoint 2013 is a feature that depends on HTML5, which requires version of browser, SharePoint by default doesn’t has feature to disable or enable this.
You can try disabling the drag and drop feature by disabling an add-on in Internet Explorer, or
using Internet Explorer 9 or lower.
Here is a similar thread for your reference:
https://social.msdn.microsoft.com/Forums/office/en-US/8961ff07-039d-47b0-ae7d-8e24af96234a/2013-doc-library-settings-turn-off-drag-and-drop-and-findsearchfilter-on-metadata-columns?forum=sharepointcustomization
http://community.office365.com/en-us/f/154/t/228079.aspx
More information:
The Solution to SharePoint 2013 Drop and Drag Not Working
SharePoint 2013 Drag and Drop Upload Not Working
Best Regards,
Linda Li
Linda Li
TechNet Community Support

How to Disable VRFY and RCPT

How does one disable VRFY and RCPT on Ironport AsyncOS for Email Security 7.6 and what is the impact? I understand an attacker can perform an account enumeration and verify whether e-mail accounts exist and a spammer can automate the method to perform a directory harvest attack and send spam emails.
Thanks

There are three SMTP commands that apply here.
VRFY - not implemented by ESA. ESA will respond "250 ok" to everything
EXPN - not implemented by ESA. ESA always responds "500 command not recognized"
RCPT - can't be "disabled" as there is no other way to specify envelope recipients.
I would recommend that you set up LDAP Accept and DHAP (Directory Harvest Attack Prevention). That will allow the ESA to stop dictionary attacks. Once too many bad recipients have been tried the appliance will reject all recipients from that IP address for an hour.
DHAP is normally best set up to function during the SMTP conversation and to drop connections. If you enable it during the work queue your appliance can get bogged down with undeliverable outgoing messages from all the bounces. Dropping the connection can help with botnets since they usually don't waste time by re-queuing messages to be tried later.

How to disable graphics and/or java in Firefox 23.0.1

In previous versions of Firefox, like 19.0, it is a simply matter to disable graphics and/or java. Simply go to Firefox "Tools", "Options", "Content", unclick "Load images Automatically", unclick "Enable JavaScript".
With Firefox 23.0.1, I don't see that as a option. How do I easily disable and enable the graphics and javascript?
I am aware that "Adblock" has some capabilities to do some of this. Although I find Adblock more complicated and have not been able to achieve my goals with it.
This is very important to me.

"In Firefox 23, as part of an effort to simplify the Firefox options set and protect users from unintentially damaging their Firefox,"
Are you kidding? so you mean to tell me that it helps users by requiring them to download third party addons(memory leaks and all) just to do something that use to be as simple as clicking a button?
If i have to use untrusted third party add-ons that i need to download to my computer i may as well just ,i don't know, Download a new browser while im at it.
If anything they should have just made it EASIER to find so users could EASILY undo what they EASILY done.
it's hogwash to say "just use addons" I try to keep my add-ons and extensions to the bare necessities for a reason. And coming from a user who until recently was stuck with dialup(because there was no other options) the ability to remove images is key. That and if im in a public setting i don't want to put my facebook images on display.
Overall, HUGE mistake by firefox.

How to disable block and delete button in me22n transaction

Hi experts !,
as per my requirement i want to disable delete and block button in me23n . for this i wrte my logic but problem
is when my logic satisfies then i want to disabele those two buttons . those block button function code is 'MEPO1211LOCK'
if it is screen field we can use loop at screen and input = 0 . but here it is funtion code how to disable this funtion code as per
condition .
i tried this SET PF-STATUS ' pf status name ' EXCLUDING ' fucntion code name '. also but not working ..
if any one have any idea pls share ......

Hello Experts,
I have similar requirement. Please help....

How to Disable Save and Save a Copy functions in a PDF file

I would like to know how to disable the Save and Save a Copy functions. I have a client that does not want the ability to save for there customers. I also need to make sure that it can not be changed by there customer.
Any suggestions would be greatly helpful.
Thanks
Andrew

Once the PDF is viewed on a machine it is already saved there. That is why it is not possible. The only option is to not allow folks to have the PDF at all. You can disable the ability to copy information from the PDF or use SAVE as to put it in a different form without the security. Those are the security features that are available, but with the caveat that many 3rd party products ignore the PDF security and thus your efforts are not warrented if you want true security. The only way to get full security is through a fancy online (and costly) solution.

How to disable auto_home and individual datasets on Solaris 11 11/11

Good morning,
There's a lot of changes in Solaris 11 that I like, but two of the ones I dislike, I just can't seem to get rid of them.
I'd like to disable auto_home, permanently. I don't want users' home directories to be mapped on /home .
I've read that all I needed was to remove all mentions of home in /etc/auto_home and/or /etc/auto_master (can't recall which one of the 2 files as I removed all mentions, 'f course...) .
Once done, I read I simply needed to run automount once (automount -v) .
No go. The next user I've created was mapped in /etc/auto_home, and /etc/password modified accordingly.
Moreover, each new account is created as its own individual ZFS dataset. I understand the advantages of this, as each user can create his own snapshots, etc. But I don't need that, and I certainly won't need a zfs list output that scrolls on many pages !
How can I disable this ? I just tested it, 2 seconds ago :
[08:43:10|jfg@oslo:/opt] sudo useradd -u 9999 -c 'TEST' -d /export/home/TEST -m -s /bin/bash test
80 blocks
[08:45:59|jfg@oslo:/opt] grep TEST /etc/passwd ; grep TEST /etc/auto_* ; zfs list | grep TEST
test:x:9999:10:TEST:/home/test:/bin/bash
/etc/auto_home:test localhost:/export/home/TEST
rpool/homes/oslo/test 35K 21.1G 35K /export/home/TEST
<EDIT> : forgot to mention, I destroyed the original dataset for the home directories, rpool/export/home, and created a new one, rpool/homes/zoneName/ as multiple zones accounts will be "hosted" in this dataset.
Thanks for helping,
Regards,
-- Jeff
Edited by: user5989503 on Jan 10, 2012 8:54 AM

Thanks Alan,
I remember awhile back reading about this on OpenSolaris, but it just came back to mind as you mentioned it.
Still, other than svcadm disable autofs, I can't see how to disable only auto_home.
And I'm still stuck with my individual zfs datasets that I hate hoooo so much ! :-)
Thanks,
-- Jeff

How to disable HTML and Download excel sheet

Hi ,
i've some reports in my dashboards, i've enable report links for print and download, When i click on print button we can get PDT,HTML. I need only PDF. not HTML. How to disable HTML in print button. and also when click download button i need to see only download to Microsoft excel . Can any one help me out .

Hi,
Please refer the below links to remove the options
http://obiee-tips.blogspot.com/
Hope this helps
Regards
MuRam
Edited by: MuRam on Jan 11, 2012 2:57 AM

How to disable minimize and maximize buttons of a popup window

hello.
can someone please tell how to disable the minimize and maximize buttons for a popup window.
i know this is very basic concept.. but iam new to jdeveloper..please someone help me out

Hello,
U can use script in ur page to open the Popup window.
window.open("yourpage.do", window_name, 'toolbar=0,scrollbars=0,location=0,status=yes,menubar=0,resizable=0,width=600,height=400,left = 225,top = 140');
Bye

How to disable anoying and slow stamp brush preview? CS5

Similar Messages

Maybe you are looking for