How to disable auto shut down when doing line-in recordi

I am using Zen V Plus 6gb to do li've line-in mic recording.
I experience creation of a few tacks when the recording ends.
When I asked Creative Tech, they said it is auto shut down when the voice recorded falls below audible level. Can I disable this?

If I got you right, it interrupts the recording when a period of seconds no signal more loud than a certain level is
on the line-in source? Right? Normally you could aplify anything, even white noise, but I don't get the point.
Are there any songs that have longer interruptions than 5 seconds according to this cd norm?

Similar Messages

How to set auto shut down after download finishes?

How to set notebook to auto shut down after Firefox finishes download?

Firefox 4 Auto Shutdown has been updated for Firefox 4 and has been featured here - [http://www.techiechips.com/auto-shutdown-after-download-firefox-4/ Auto Shutdown after Download for Firefox 4]

IP4 AUTO-SHUT DOWN WHEN CONNECTING TO WI-FI

Hi, fellow apple users, my name is ace, I'm from the phillippines. I ordered my Iphone from singapore, using a singapore address of a friend of mine and have it shipped there then delivered to me through Singpost here in the Philippines.
I Noticed that my Iphone 4 Automatically shut-down when it connects to a wi-fi or internet sharing while i'm in the office. Was this normal or there was a problem with my phone, Here is the serial number: 830**0A4T
<Edited by Host>

HI Ace,
Try here: Troubleshooting iPhone Hardware
Click: Connectivity / Network: Wi Fi issues
Carolyn

Qosmio X770-11C - how to disable on board speakers when using Line Out?

Hi,
Is there any way to disable on board speakers when the line out is used.
Currently if I plug in a cable to the hadphone socket and choose lineout on the realtek control panel, the sound is output to the line out as expected but also through the internal speakers.
Is there any way to stop this, and only have sound going out through the line out?
thanks
Graeme

If you want to hear sound on headset only you must choose Headphone option.
Disconnect cable and connect it again. When you see small window on the screen where you can choose between headphone and line out options choose headphone and you will hear sound on external device only.
In case you have disabled this popup dialog you can activate it manually. Open Realtek manager connect external device and when you see activated black point on the right side make double click there and change settings.

Did download of 3.6 12.took ages,and computor auto shut down when done how do i know if its installed?

firefox indicated a new download version was advised.I indicated go ahead.the download took several hours and i checked every 1/2 hour
but at 10.30 my computer had shut down.I cant find anywhere that tells me if it was applied? ah I see below i am on 3.6.10 still what should i do now?

When you skip an update, as you did by missing the 3.6.11 update, Mozilla downloads the entire Firefox package which isn't compressed. You end up downloading ~10.4Mb instead of a ~2.4Mb update, or a full, compressed Firefox_setup package that's ~7.7Mb. Not a big deal if you have a hi-speed connection (about a minute or so to download ~10.4Mb), but it sounds like you are on dial-up connection. Unfortunately for you, the 3.6.12 version was released just a few days after 3.6.11 was released due to a security fix that wasn't known of at the time Mozilla decided to release 3.6.11 - very rare for a series of releases to occur that quickly, but it is reassuring that Mozilla can respond with a security fix in like 48 hours from notification of the problem to releasing the patched version to their users.
My advice is to download the installer (Firefox_setup) and install it over your current 3.6.10 version. http://www.mozilla.com/en-US/firefox/

Auto shut-down when connecting USB-units (on some units..)

Hi there.. i just bought this mainboard :
MSI K9N Platinum, nForce 570 Ultra, DDR2, Socket-AM2,2xGbLAN,Firew, ATX, PCI-Ex16
Version :
MS-7250
I have read the "shut down" issues from the sticky topics in this forum, and i want to know if this is the same issue...
Here we go :
I have approx 3-4 connected usb units which works perfectly well..
- My 3Com OfficeConnect Wireless USB Adapter
- My wireless keyboard
- A usb memory stick..
These work perfectly well..
I also have a Lacie USB 2.0 External Harddrive which works ok enough sometimes.. but it's kinda unstable..
What doesn't work at all.. is my Sony Ericsson W950i when i connect it to _any_ usb port on my computer..
What happens :
When i insert the usb-cable into the phone.. and win xp (pro sp2) detects the phone, it immidiately shuts down the pc.
Sometimes i have to unplug the power cable for about... 20 seconds to get it to boot again at all.. but most times it's enough to boot as normal.
Is there _anything_ i can do to fix this ? ... or.. do i have to get a replacement motherboard (newer version)..
PS !!!
*I also tried to flash tie bios (the windows way), but after pressing the "start" button for flashing.. nothing happens.. nothing at all.. Weird
Any ideas on this is rewarded with a digital beer
Best regards
Terje.-..-

I'll provide some more (a LOT) of information..
It's part of the report from Everest Ultimate Edition...
I have read thorugh all the posts regarding the USB-trouble (which you linked).. but it's not the same problem as i have (atleast it doesn't seem so..)
I didn't connect anything to the 10'th pin (USBOC)..
--> https://forum-en.msi.com/index.php?topic=57472.0
As you see from this log.. some usb-units are already listed there.. and a lot of other usb units works perfectly well..
It's just a external harddrive, and my phone (both USB connectors) which shuts down my pc...
USB SETUP
--> THE USB-CONTROLLER (PCI)
[ nVIDIA nForce 570 Ultra (MCP55U) - EHCI USB 2.0 Controller ]
Device Properties:
Device Description nVIDIA nForce 570 Ultra (MCP55U) - EHCI USB 2.0 Controller
Bus Type PCI
Bus / Device / Function 0 / 2 / 1
Device ID 10DE-036D
Subsystem ID 1462-7250
Device Class 0C03 (USB Controller)
Revision A2
Fast Back-to-Back Transactions Supported, Disabled
[ nVIDIA nForce 570 Ultra (MCP55U) - OHCI USB 1.1 Controller ]
Device Properties:
Device Description nVIDIA nForce 570 Ultra (MCP55U) - OHCI USB 1.1 Controller
Bus Type PCI
Bus / Device / Function 0 / 2 / 0
Device ID 10DE-036C
Subsystem ID 1462-7250
Device Class 0C03 (USB Controller)
Revision A1
Fast Back-to-Back Transactions Supported, Disabled
Device Features:
66 MHz Operation Supported
Bus Mastering Enabled
USB Devices:
A727 6893 3Com OfficeConnect Wireless 108Mbps 11g USB Adapter
0451 2036 Generic USB Hub
046D C50C USB Composite Device
046D ABD0 USB Human Interface Device
046D C50C USB Human Interface Device
046D C50C USB Human Interface Device
Universal Serial Bus controllers:
Generic USB Hub 5.1.2600.0
Standard Enhanced PCI to USB Host Controller 5.1.2600.0
Standard OpenHCD USB Host Controller 5.1.2600.2180
USB Composite Device 5.1.2600.0
USB Root Hub 5.1.2600.2180
USB Root Hub 5.1.2600.2180
[ Universal Serial Bus controllers / Generic USB Hub ]
Device Properties:
Driver Description Generic USB Hub
Driver Date 01.07.2001
Driver Version 5.1.2600.0
Driver Provider Microsoft
INF File usb.inf
Hardware ID USB\Vid_0451&Pid_2036&Rev_0101
Location Information General Purpose USB Hub
[ Universal Serial Bus controllers / Standard Enhanced PCI to USB Host Controller ]
Device Properties:
Driver Description Standard Enhanced PCI to USB Host Controller
Driver Date 01.06.2002
Driver Version 5.1.2600.0
Driver Provider Microsoft
INF File usbport.inf
Hardware ID PCI\VEN_10DE&DEV_036D&SUBSYS_72501462&REV_A2
Location Information PCI bus 0, device 2, function 1
PCI Device nVIDIA nForce 570 Ultra (MCP55U) - EHCI USB 2.0 Controller
[ Universal Serial Bus controllers / USB Root Hub ]
Device Properties:
Driver Description USB Root Hub
Driver Date 01.07.2001
Driver Version 5.1.2600.2180
Driver Provider Microsoft
INF File usbport.inf
Hardware ID USB\ROOT_HUB20&VID10DE&PID036D&REV00A2
[ Universal Serial Bus controllers / USB Root Hub ]
Device Properties:
Driver Description USB Root Hub
Driver Date 01.07.2001
Driver Version 5.1.2600.2180
Driver Provider Microsoft
INF File usbport.inf
Hardware ID USB\ROOT_HUB&VID10DE&PID036C&REV00A1
IRQ 20 Shared Standard Enhanced PCI to USB Host Controller
IRQ 22 Shared Standard OpenHCD USB Host Controller
THIS APPEARED UNDER SYSTEM DEVICES (so it have detected it..)
[ System devices / Sony Ericsson Cable Emulation Bus ]
Device Properties:
Driver Description Sony Ericsson Cable Emulation Bus
Driver Date 31.05.2006
Driver Version 4.38.6.212
Driver Provider Sony Ericsson Mobile Communications AB
INF File oem14.inf
Hardware ID {3a4687c6-2342-48fb-a5b3-632baa20734b}
CPU
CPU Properties:
CPU Type DualCore AMD Athlon 64 X2, 2400 MHz (12 x 200) 4600+
CPU Alias Windsor-512
CPU Stepping BH-F2
Instruction Set x86, x86-64, MMX, 3DNow!, SSE, SSE2, SSE3
Original Clock [ TRIAL VERSION ]
Min / Max CPU Multiplier 4x / 12x
L1 Code Cache 64 KB per core (Parity)
L1 Data Cache [ TRIAL VERSION ]
L2 Cache 512 KB per core (On-Die, ECC, Full-Speed)
Multi CPU:
Motherboard ID nVidia MCP55
CPU #0 AMD Athlon(tm) 64 X2 Dual Core Processor 4600+, 2412 MHz
CPU #1 AMD Athlon(tm) 64 X2 Dual Core Processor 4600+, 2412 MHz
CPU Physical Info:
Package Type 940 Pin uOPGA
Package Size 4.00 cm x 4.00 cm
Transistors [ TRIAL VERSION ] million
Process Technology 90 nm, CMOS, Cu, SOI
Die Size [ TRIAL VERSION ] mm2
Core Voltage 1.100 - 1.400 V
I/O Voltage 1.2 V + 2.5 V
Motherboard
Motherboard Properties:
Motherboard ID 63-0100-000001-00101111-051806-OPTERON$1ADGH004_M2N PLATINUM A7250NMS V1.10 05/18/06
Motherboard Name MSI K9N Platinum (MS-7250)
Front Side Bus Properties:
Bus Type AMD Hammer
Real Clock 200 MHz
Effective Clock 200 MHz
HyperTransport Clock [ TRIAL VERSION ]
Memory Bus Properties:
Bus Type DDR2 SDRAM
Bus Width 64-bit
DRAM:FSB Ratio CPU/8
Real Clock 302 MHz (DDR)
Effective Clock 603 MHz
Bandwidth [ TRIAL VERSION ] MB/s
Motherboard Physical Info:
CPU Sockets/Slots 1 Socket AM2
Expansion Slots [ TRIAL VERSION ]
RAM Slots 4 DDR2 DIMM
Integrated Devices Audio, Dual Gigabit LAN, IEEE-1394
Form Factor ATX
Motherboard Size 240 mm x 300 mm
Motherboard Chipset nForce570Ultra
Extra Features [ TRIAL VERSION ]
Motherboard Manufacturer:
Company Name Micro-Star International
Product Information http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_list.php
BIOS Download http://www.msi.com.tw/program/support/bios/bos/spt_bos_list.php
Chipset
[ North Bridge: AMD Hammer DDR2 IMC ]
BIOS
BIOS Properties:
BIOS Type AMI
System BIOS Date 05/18/06
Video BIOS Date 10/24/06
BIOS Manufacturer:
Company Name American Megatrends Inc.
Product Information http://www.ami.com/amibios
BIOS Upgrades http://www.esupport.com/biosagent/index.cfm?refererid=40
OTHER
Display adapters:
NVIDIA GeForce 8800 GTS 6.14.10.9744
SCSI and RAID controllers:
HPT302 UDMA/ATA133 Controller 1.22.0.0
VAXSCSI Controller 5.1.2600.2180
Universal Serial Bus controllers:
Generic USB Hub 5.1.2600.0
Standard Enhanced PCI to USB Host Controller 5.1.2600.0
Standard OpenHCD USB Host Controller 5.1.2600.2180
USB Composite Device 5.1.2600.0
USB Root Hub 5.1.2600.2180
USB Root Hub 5.1.2600.2180

Display shuts down when doing a system restore

Presio CQ61-411M
Windows 7
Display shuts off when trying to do a system restore.
When doing a system restore the display seems to shut off. I have tried many times, sometimes it stops at 3%, sometimes at 14% and sometimes before I can even start it. I have attached a second monitor and it goes off at the same time.
I can no longer boot to windows since it started a system restore.
I have tried to boot from a CD and also get a black screen. All lights on the keyboard are still on. It is like it goes into powersave mode. Light on HD is solid, doesn't make any noise.
I am so frustrated! There was no power or display issues before I started. I was simply going to do a clean restore.

Yes, if you have the music folder you still have your song files....the most important!
But I would hate to lose my ratings and playlists.
If you want your ratings and playlists from the ipod, itunes will NOT do it. You would have to download & install some other 3rd-party ipod manager. Such as mentioned here:
http://www.ilounge.com/index.php/articles/comments/copying-music-from-ipod-to-co mputer/P2
My advice for the future is to make frequent backups of the iTunes Library.itl file. About once a week, I put a copy on a USB stick Mor often if I've done lots of edits/added content. And ALWAYS before an itunes upgrade.

MBP shuts down when making Quick time conversion

MBP core duo 1.83 2G ram current updated software.
It shuts down when I try to do a Quick time conversion..
went to the Genius bar and booted from another drive and my macbook still shut down when doing a QT conversion. He says that means it is NOT a software issue.. blames the logic bd.. 310. for a fix if I send it out.. they would keep it overnight and do testing for free.
the console says "previous shut down cause: 3"... He said that was a code for shutting down by holding the button for 4 seconds and got all puzzled about that.
I have been able to convert files using Compressor which I have to do before I can use the go pro video in final cut.
it might have shut down once during a conversion that way.

Monitor your CPU core temp and see at what temp the computer shuts off. Also, download SystemLoad and run that for awhile to stress the processor. See if you can get it to shut down with that and at what temp.
Dave M.
MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
Macsimum News Associate Editor  Creator of 'Mac611 - Mobile Mac Support'

I was importing photos to picasa from iphoto and it shut down when i returned i had no photos in iphoto

i was importing photos to picasa from iphoto, and it shut down when doing so. when i restarted i photo, all of my photos were gone. where are they?? please help??

Make a temporary, duplicate copy of the library and try the three fixes below in order as needed:
Fix #1
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your Home/Library/Preferences folder.
2 - delete iPhoto's cache files that are located in your Home/Library/Caches/com.apple.iPhoto folder.
3 - reboot, launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding the the Option key. You'll also have to reset the iPhoto's various preferences.
Fix #2
Launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library.
Select the options identified in the screenshot.
Fix #3
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Does line in record in ster

Im looking to buy a Zen V for li've music tapingand am wondering if the line in records in Stereo.
Also- are the recording levels displayed on the screen?
thanks

I will have to wrestle it away from my daughter to check.
As I recall there is a level indicator for the voice recording (with built in mic), but I didn't think it showed that when doing line in recording.
But haven't done recording on it for awhile, when I was helping my daughter do it we always monitored the audio through the headphones while recording.
Will try to check tommorrow.

I have a Macbook Pro 2009, i upgraded from 10.5 to 10.8.2 and now when I put it to sleep it shuts down. Does anyone know how to fix this?

I have a Macbook Pro 2009, i upgraded from 10.5 to 10.8.2 and now when I put it to sleep it shuts down. Does anyone know how to fix this?

That disk from her computer is a machine specific version, you need this disk
http://store.apple.com/us/product/MC573Z/A
and follow these instructions
How to erase and install Snow Leopard 10.6

How come when i press the sleep on my MBP it auto shut down?

How come when i press the sleep on my MBP it auto shut down?

Pressing the Power Button brings up a dialog: "Restart Sleep Cancel Shut down (default button).
Teddy Mack; are you just giving the Power Button a light touch, or holding it down?

I have a macbook from early 2008, and when I sign onto safari I get an error message for fast browser search plugin. After that error comes up my computer freezes and I have to force it to shut down. Does anyone know what that means and how I can fix it

I have a macbook from early 2008, and when I sign onto safari I get an error message for fast browser search plugin. After that error comes up my computer freezes and I have to force it to shut down. Does anyone know what that means and how I can fix it?

Means you have an incompatible Safari extension installed. Look in the /Home/Library/Safari/Extensions/ folder for the offending plug-in and delete it.

Why does Macbook Pro have gray "curtain"and msg to shut down when playing video online?

Hi,
I have a MacBook Pro running Snow Leopard v 10.6.8 and have put on all the security updates.
I bought this machine just days after the newest MBP's were released with Lion because I wanted to stay with Snow Leopard
From the very beginning I would have occasional "gray screens" with a message that I'd encounterd a problem and needed to shut down. It always occured while I was watching a streaming video online (Flash?) but it didn't always happen. I updated my Flash plugin and that seemed to help. I use both Safari and FireFox and both are now updated to the latest versions.
I had also noticed via iCleanMemory that my memory availability was very low .....I always have many tabs open in my browsers and have backup software that backs up to online storage running and when I watched a video, it dropped to almost 0 and everything ran slow. I had 4 GB Ram.
So, I ordered new ram and put that in and now have 8 GB. Machine runs fast. Love it....except it keeps giving me that veil of gray and the message to shut down. It happens several times a day now and while usually in conjunction with watching a video clip, it's not always the case. But I have lots of available memory. That wasn't the issue.
I found an Apple Support paper relative to needing a video update on some mid 2010 MBP's and downloaded it. It won't install and says it won't run on my system so that didn't help.
I'm at my wits' end trying to keep this thing running. Everytime I have to shut it down it means a minimum of 8 min...sometimes more.....before it will restart. If I try to restart sooner than that, it begins to boot and then just has lines and lines of numbers and code running across it....and often continuous beeping sounds and I have to hold the button down to shut it off again. If I wait long enough, it does boot back up and sometimes runs fine as long as I'm not watching video clips, a streaming tv show or clicking on a lot of links in web pages.
I don't believe it has shut down when I was doing anything that wasn't web related....i.e. on a browser. And, when I was running with only 4 gb ram, it rarely shut down, just ran very, very slowly. Now with 8 gb ram it is speedy but doesn't seem to want to keep working!
Anyone have any ideas what I should try next?
Thanks
Paula

Hi Allan,
Thanks for your reply.
I have been closing iCleanMemory but the shut down (kernel panic) was still happening. Not sure how to go about uninstalling it as it's one that runs at start-up and dragging it to the trash might not get rid of it completely. I"ll find it's web site and see if they have any info.
Haven't checked your web link yet (it's late and gotta get to bed) but will do so tomorrow.
I also run Backblaze and DropBox that begin at startup and are constantly updating in the background, iStatMenus and Sharpshooter.
The kernel panics were happening....tho much less frequently.....before i put iClean Memory on. If I remember right, I installed it just because I had those periodic shut downs and wondered if it was a lack of memory. Because I then saw that memory was very low all the time, I decided I must need to put more memory in. And that seems to have made the issue worse while also making the machine work faster for the time it is running.
Now, I've been working on here for a couple of hours and had no problem at all......but I haven't asked it to play any kind of video. Before I quit for the night, I'll try to watch the last one I tried that caused it to shut down and see if it does it again.
I do appreciate your help as I have just enough knowledge about these things to be dangerous.
Paula

My macbook wont shut down when I close lid, how do I prevent this?

My macbook wont shut down when I close lid, how do I prevent this?
This had happened before and I seem to recall having to disable blue tooth.
Is this correct?
Charles

It's not suppose to shut down when closing the lid, it's supposed to sleep.

How to disable auto shut down when doing line-in recordi

Similar Messages

Maybe you are looking for