How to disable autocheck on import

I have my IPod setup to manually sync and only sync the songs I check. When I import new songs into the ITunes library it automatically checks the songs which then syncs with my IPod. Does anyone know if there is a way to disable the auto check on import?

Does anyone know if there is a way to disable the auto check on import?
There is not.
Instead of unchecking songs to not sync, create playlists then sync only those playlists.
Then simply add/delete from these playlists and sync the iPod.

Similar Messages

How to disable Double Click Import

Hi im new to CS6 and I find the double click import more trouble than it is helpfull. Clicking through clips im always missing the clips by a little this then brings up the import window then I have to close it and precious seconds are lost (its annoying). Is there a way to disable this.
thanks,
Ian

On windows if you go to where it says "start/the windows icon" on the bottom left of your taskbar. Then go to "control panel" also make sure the view is set to "category small icons" (it should say view by it's in the upper right area of the control panel) then select "mouse". Then check the "pointer options tab".
Then make sure the "enhance pointer precision" option is enabled. Then also enable to the "snap to" option as well. For me this makes my mouse more precise. (IMO anyways)
Although I haven't really experinced the problem you're describing, I have however had issues with mouse precision before on certain systems. This setting has always helped me out with that.

Ctrl+shift+U - Unicode input, how to disable?

Anyone knows how to disable ctrl+shift+u unicode input?
Whenever I press ctrl+shift+u, I get an underlined "u" and can enter some unicode number. However, I don't need it, and because of this, for example in qt creator the predefined "ctrl+shift+u" keyboard shortcut doesn't work.
I have no idea where this mapping comes from (obviously not qt, since ctrl+shift+u is mapped to an important shortcut), but maybe gnome or the xserver?
Thanks already

I just updated from Ubuntu 13.10 to Ubuntu 14.04 and I found that I have exactly this same problem, which is being caused by ibus (my up to date Arch system doesn't seem to have the problem). You can see if ibus is running on your system via:
$ ps aux | grep -i ibus
peniwize 3108 0.0 0.2 47180 3620 ? Ssl Jun09 1:44 /usr/bin/ibus-daemon --daemonize --xim
peniwize 3127 0.0 0.0 37268 264 ? Sl Jun09 0:00 /usr/lib/ibus/ibus-dconf
peniwize 3129 0.0 0.7 181000 13040 ? Sl Jun09 0:34 /usr/lib/ibus/ibus-ui-gtk3
peniwize 3147 0.0 0.2 40224 3984 ? Sl Jun09 0:00 /usr/lib/ibus/ibus-x11 --kill-daemon
peniwize 3179 0.0 0.0 27956 1096 ? Sl Jun09 0:10 /usr/lib/ibus/ibus-engine-simple
I'm running XFCE and there is now a "Language Support" icon in the "Settings" panel (select "Settings Manager" on the main menu.) The Language Support app contains a "Keyboard input method system" selection on Language tab. I changed it from 'IBus' to 'None' and now Ctrl+Shift+u works again. (This is a quick and dirty solution that works for me because I'm only using English and never have to type special characters.)

How to disable infobar for plugins (ask to activate)

Allow (url) to run "Adobe Flash"? [Block Pligin] [Allow] X
how to disable this infobar?
plugins.hide_infobar_for_blocked_plugin or
plugins.hide_infobar_for_outdated_plugin are not working.
i need ask to activate function but dont need this infobar.
FF26

It's also possible to just add the following code to your "userChrome.css":
/* don't display click-to-play notification for disabled hidden plugins */
notification[value="plugin-hidden"] {
display: none !important;
}

How to disable T410s touch SCREEN under windows XP?

Hi,
For the life of me i can't figure out how to disable the touch SCREEN (not to be confused with the touch PAD) - can someone please advise? I'm running Windows XP SP3. I've searched all the configuration settings I could think to check, google, these forums, etc.
Thanks in advance.

hey rreist,
the T410s does not have a touchscreen. are you referring to a different unit ?
do provide the MTM [machine type model]:
To locate MTM -
http://support.lenovo.com/en_US/FindProductNumber.page#find
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

How to disable automatic statistics collections on tables

Hi
I am using Oracle 10g and we have few tables which are frequently truncated and news rows added to it. Oracle automatically analyzes the table by some means which collects statistics of the table but at the wrong time(when the table is empty). This makes my query to do a full table scan rather using indexes since the statistics was collected when the table was empty.Could any one please let me know how to disable the automatic statistics collection feature of Oracle?
Cheers
Anantha PV

Hi
I am using Oracle 10g and we have few tables which
are frequently truncated and news rows added to it.
Oracle automatically analyzes the table by some means
which collects statistics of the table but at the
wrong time(when the table is empty). This makes my
query to do a full table scan rather using indexes
since the statistics was collected when the table was
empty.Could any one please let me know how to disable
the automatic statistics collection feature of
Oracle?
First of all I think it's important that you understand why Oracle collects statistics on these tables: Because it considers the statistics of the object to be missing or stale. So if you just disable the statistics gathering on these tables then you won't have statistics at all or outdated statistics.
So as said by the previous posts you should gather the statistics manually yourself anyway. If you do so right after loading the data into the truncated table, you don't need to disable the automatic statistics gathering as it only processes objects that are stale or don't have statistics at all.
If you still think that you need to disable it there are several ways to accomplish it:
As already mentioned, for particular objects you can lock the statistics using DBMS_STATS.LOCK_TABLE_STATS, or for a complete schema using DBMS_STATS.LOCK_SCHEMA_STATS. Then these statistics won't be touched by the automatic gathering job. You still can gather statistics using the FORCE=>true option of the GATHER__STATS procedures.
If you want to change the automatic gathering job that it only gathers statistics on objects owned by Oracle (data dictionary, AWR etc.), then you can do so by calling DBMS_STATS.SET_PARAM('AUTOSTATS_TARGET', 'ORACLE'). This is the recommended method.
If you disable the schedule job as mentioned in the documentation by calling DBMS_SCHEDULER.DISABLE('GATHER_STATS_JOB') then no statistics at all will be gathered automatically, causing your data dictionary statistics to be become stale over time, which could lead to suboptimal performance of queries on the data dictionary.
All this applies to Oracle 10.2, some of the features mentioned might not be available in Oracle 10.1 (as you haven't mentioned your version of 10g).
Regards,
Randolf
Oracle related stuff blog:
http://oracle-randolf.blogspot.com/
SQLTools++ for Oracle:
http://www.sqltools-plusplus.org:7676/
http://sourceforge.net/projects/sqlt-pp/

How to: disable the default sharpening

All -
I've done a detailed writeup on how to
disable the default sharpening in Lightroom using a develop preset and the import module.
It's really a pretty basic technique, but I've seen a lot of people asking how to do this very thing. Hope this tutorial is useful to some folks!

Well, that begs the question at least for me? What is the default sharpening for your camera? Do you truly find it excessive for a first pass?
 
 
John "McPhotoman"
 color="#800000" size="2">~~ John McWilliams
 
 
 
 MacBookPro 2 Ghz Intel Core Duo, G-5 Dual 1.8;
 Canon DSLRs

How to Disable the Adobe Flash Player and Reader Updates

Ok, For the last two months or so, I have been plagued by the Adobe Flash Player and Reader updater that will not go away. That's not the worst thing though: Somehow, someway, the Adobe updater subverts my entire windows 7 machine and makes itself the most important program on my system, stopping all other necessary functions. After I just turn it on, the updater will suspend all Windows operations in favor of the updater getting its message out the Adobe "needs" updating. I have tried updating the stupid thing, only to find that after the update goes in, my whole computer locks up and I have to load a system restore point. This thing acts like a virus, and until someone comes up with a way to make it work properly, that's what I'm calling: Adobe creates and sells a computer killing virus. I want a sure fire way to disable the updater that will work, and that will never bug me again about updating the virus. After going through three different computer repair companies, many online forums and chat rooms and my own knowledge of how to disable programs, I have instructed my firewall to block all attempts by Adobe to update. This has to stop.

Flash Player:
Adobe Reader:

How to disable tab in detail screen in MIGO T.code

Hi ,
I want to disable serail number tab in detail tab in MIGO transaction and also want to create same subscreen like Serail number with additional 2 fields.
Could some one help me how to disable above mentioneed tab and add new tab to MIGO transaction.
I tried with BADI MB_MIGO_BADI but I 'm not getting how to disable the Serail number tab ( Program SAPLMIGO Screen Number : 0360).
Regards,
Narendra.

Hi
The call to this screen is hardcoded in report LMIGODC2 (include of SAPLMIGO)
*   set subscreen for serial numbers
    if goitem-sernp is initial.
      g_sub_serial = '0361'.            "no serial numbers
    else.
      data l_serialize type abap_bool.
      CALL METHOD lcl_migo_buffer=>serial_relevance_check
        EXPORTING i_sernp = goitem-sernp
                  i_bwart = goitem-bwart
                  i_sobkz = goitem-sobkz
                  i_kzbew = goitem-kzbew
                  i_kzzug = goitem-kzzug
                  i_kzvbr = goitem-kzvbr
        IMPORTING e_serialize = l_serialize.
      if l_serialize = abap_false.
        g_sub_serial = '0361'.            "no serial no. during GM
      else.
        g_sub_serial = '0360'.             "serial numbers active.
      endif.
    endif.
Debug it and check what possible solutions you have.
Regards
Eduardo

Landmarks display in Maps, how to disable ?

I am using Landmark feature to plan routes, and i managed to import routes from google earth as landmarks in my E71.
Three question remaining:
1. How to disable the display of the landmarks ? Once i have choosen to display a category, i do not know how to disable it again (without deleting the landmarks). Since loading of maps takes more time with landmarks active i would like to switch them off again.
2. Some landmarks are not loaded (usually around 20% of the landmarks create errormessage and do not have valid coordinates). Can not find the reason... anybody else having this problem?
3. Does anybody know how to create own symbols? The blue pin-point is to big... would like to have simply a very small point on the map.

I'm not sure if you can remove your personally saved favourites from the display. There is a choice in Maps 2.0 to enable and disable showing of certain types of "Point Of Interest":
Options>Tools>Settings>Map>Categories
But this does not include favourites, and there is no similar option under the Favourites section.

KSFETCH- causing massive slowdown on MDD 10.5x - how to disable

GOOGLE IS PLAYING THE SLIME MASTER ROLE
Below are several examples of how to disable this bull roar
from taking precious system resources.
EVEN ON OLDER MACS - (I used MDD running 10.5x)
This started happening to me probably around May or June.
My computer was Held down in some unknown process and then
I installed Little Sntich - and BINGO it's KSFETCH the little
hidden installer that is accessed multiple times daily by Google
to (?).
My computer was rendered almost unusable when these updates would occur
and it was HORRIBLE because they happen so frequent.
Does anyone know why LITTLE SNITCH does not have a
simple area where you can have the Name blocked as
KSFETCH ? Instead of the IP ect? I thought it would have this feature
but no and KSFETCH gets around this with Keystone
by changing the IP last digit every call.
Amazingly simple and effective.
Google is the robot to fear.
IMPORTANT
THERE ARE AT LEAST 2 library folders. (depending on how many users on system)One for root user (current user) and one for
administrator (master file set)
You want to target your Master file set first and then do your users LIbray folders.
method 1:
USING TERMINAL :
http://forums.obdev.at/viewtopic.php?f=1&t=6720
by buzzart » Fri Jun 29, 2012 4:27 am
To stop the ksfetch (Google's auto-updater software) from checking every hour run the following in terminal:
defaults write com.google.Keystone.Agent checkInterval 604800
604800 is a week in seconds. Divide by 7 to check daily.
Keystone agent is generating a new temporary executable file on each update check. This is why Little Snitch is asking repeatedly for permission. If Little Snitch were updated to allow regex for name checking then this could be solved. No doubt this would introduce other issues that would need to be considered.
method 2 :
USING TERMINAL :
I have deleted files in LaunchAgents and made the Google files inaccessible = permissions 000 and ksfetch keeps running every hour. The "Do No Harm" company is full of it.
method 3 :
MANUAL method
Go to /Library/Google/ and copy it to your desktop. delete GoogleSoftwareUpdate, Lock it and replace it with your old one.
method 4 :
MANUAL method
first go to your home folder, then to the library folder. Inside the library folder you will find a folder called Google. Inside the google folder there is a folder named GoogleSoftwareUpdate. Highlight this folder and click cmd i. The window that pops up is what you need. At the bottom of this window, you will find sharing and permissions. This is where you would change the settings for the folder.
That is cmd plus the i key. (⌘+i) simultaneously.
The same dialogue box can be accessed by right-clicking on the folder and selecting 'get info'.
Incidentally, if you trash the contents of the folder and then lock the folder (checkbox at the top of the info window) that will also prevent anything being written to it.

This seems to be a better / easier way. In finder go to /Users/YourUserName/Library/Google
Then right click "get info" or CMD I and change the permissions on the "Google Folder" too read only and lock it.
You can also do this via terminal for advanced users.
This works for Hands Off or Little Snitch in fact you can delete "all the rules" for KsFetch and it hasn't come back for me in a long time.
This may interfere with Google software updates so if your Google stuff breaks just change the permissions back and update. Then change back if necessary.
You can also use the wildcards in Hands Off and Little Snitch they do work as well. If you the recent versions. Google it to learn how to use the wildcards.

How to disable automatic resume on Satellite P100-437

Hello to all.
I bought recently the P100-437. In general I am happy with my laptop but there is an issue that I am trying to solve and unfortunately I can't.
When I put the laptop in Hibernation and close the lid then when I open the lid the laptop automatically resumes windows. This has put me into troubles when I had to pass from some security checks in the airports.
So, I am looking for a way to stop this automatically resuming on lid opening.
It is really important to do that. Do you have any suggestions or the way this can be done??
Regards,
G.

Hello idet
I think it is time to end this long discussion. First of all you can not expect any solution because solution exists just if there is some problem. But in your case there is no problem. With simply words: no problem no solution, just possibility to avoid notebook to switch ON after opening the lid.
I also understand what you want but something like this is definitely not possible. You will not find any setting for that. When you close the lid one small hidden switch is activated and when you open the lid the same switch lose connection and give a signal to laptop to start OS because laptop knows the lid is open.
I can just imagine you bring your notebook to the service and they can cutoff the cable between this switcher and main board.
I have found similar question here when one forum user asked how to disable fingerprint reader on his new Portege 400. Something like this is definitely not possible. Just cutting off physical connection can help. Maybe!!!

How to disable xml validation

I'm trying to write an SVG parser using Xerces. The problem is that when the SVG file contains the doctype tag <!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.0//EN" "http://www.w3.org/TR/2001/REC-SVG-20010904/DTD/svg10.dtd">my program throws the following exception:
java.net.UnknownHostException: www.w3.org
 at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:177)
 at java.net.Socket.connect(Socket.java:507)
 at java.net.Socket.connect(Socket.java:457)
etc.If I remove <!DOCTYPE> tag, it works fine. According to what I read here, it's necessary to disable XML validation. The Xerces API documentation says that there is a method setValidation() in org.apache.xerces.framework.XMLParser but I can't locate it. Moreover, I don't see any org.apache.xerces.framework package in Xerces supplied with NetBeans 5.0 nor in Xerces 2.8.0 downloaded from apache.org (the XMLParser class available to me is located in org.apache.xerces.parsers).
My question is simple:
How to disable XML validation if the setValidation() method is not avaliable
OR
how to make the setValidation method available to my program?
I'm really confused :(
Here is the code:
package svgviewer;
import java.io.File;
import org.w3c.dom.*;
import org.w3c.dom.traversal.*;
import org.apache.xerces.parsers.*;
public class SVGFileParser {
 public void parse(String filename) throws Exception {
 File file = new File(filename);
 DOMParser parser = new DOMParser();
 parser.parse(file.toURL().toString()); //exception is thrown if doctype tag is present in the svg file

You're solving the wrong problem here. Turning off validation won't help, because DTDs don't only do validation. Even non-validating parsers have to read the DTD in case it contains entity definitions, for example.
If you want to stop the parser from looking for the DTD then you write a EntityResolver and apply it to the parser. The EntityResolver should be just like the one in the example in the API docs except it should return new InputSource(new StringReader("")).

"mouse battery low" message in gnome. how to disable it.

About two weeks I get this message.
remaining 14.3% of the battery, the mouse ))))
I can charge the batteries in the mouse, or whether they are used up. all the same - 14.3%)))
Perhaps this is a very important message, but it appears every minute, and very annoying me
Tried to look in the documentation of Gnome, how to disable this message, but did not find.
Maybe do somebody know how to disable that great notification?

I saw that topic
run gconf-editor
go to apps > gnome-power-manager>notify>low power <off>
it doesn't help.
Although that hive implicitly refers to the level of battery power mouse.
There is nothing that somehow say obout battery in the one.
Last edited by veranyon (2009-07-12 09:09:21)

Can't disable option show import dialog w/ memory card detected

Hello. Across the board, I don't want applications to open up when memory cards or cd/dvds are inserted. Adobe Lightroom counters this desire by opening when I insert a memory card.
I am running Windows Lightroom 2.4. In pervious versions, I could disable the perferences / import / show import dialog when a memory card is detected. However, in 2.4 I uncheck this option. Close lightroom. Open lightroom. And my disabled selection didn't save. It has it checked. And...Lightroom continues to open when I insert a memory card.
Any ideas on how to resolve this issue?
I have tried running Lightroom as admin to see if it was a registry permissions issues. The options still didn't stay unset.
Thanks for your advice.

DalePh wrote:
I am running Windows Lightroom 2.4. In pervious versions, I could disable the perferences / import / show import dialog when a memory card is detected. However, in 2.4 I uncheck this option. Close lightroom. Open lightroom. And my disabled selection didn't save. It has it checked. And...Lightroom continues to open when I insert a memory card.
You don't say which OX you're running, but if it is a Vista 64 bit version just a few notes down you will find the answer:
http://forums.adobe.com/thread/455749?tstart=0
Essentially it is a bug in 2.4 on Vista 64 bit systems and must be fixed by Adobe.
I do experience the bug on my Vista system but not on my iMac.

How to disable autocheck on import

Similar Messages

Maybe you are looking for