How to disable automatic loading of iView/Page in detailed navigation?

Hello,
We've upgraded our portal 7.0 from SP9 to SP12.
I've noticed that SAP have added this change: Whenever a user is navigating between one role/tab to another in the top level navigation the first folder at the detailed navigation is automatically opened and the first content there is automatically loaded.
I would like to disable this option - I've looked at the new properties that have been added to the detailed navigation iView between SP9 and SP12 and could only find these two: Display Parent of Hidden Node and Open Folder When Launched.
These two are not solving this problem and they are disabled anyway.
Any ideas...?
Roy

Roy,
Role and Workset Hierarchy:
Folders F1 and F2 (Roles) are defined as entry points and therefore appear on the first level of the top level navigation bar. What happen is when we click F1 (Role), the underlying folders F1a and F1b (Worksets) appear on the second level. On click on F1a the first entry F1a (Workset) of the second level is activated and its contents (iViews) are displayed in the detail navigation and the contents of the iView is displayed in the portal page of the content area.
And same procedure happens with F2 role on the first level of the top level navigation bar. When we click on the F2 (Role) the underlying folders F2a and F2b (Worksets) appear on the second level of the top level navigation bar. On click on F2a the first entry F2a (Workset) of the second level is activated and its contents (iViews) are displayed in the detail navigation and the contents of the iView is displayed in the portal page of the content area.
I think need to configure levels of TLN which includes top level navigation, detail navigation and content area and then need to define the entry points.
Below are the links for configuring levels of TLN and right below it you will find link for define entry point:
http://help.sap.com/saphelp_nw04/helpdata/en/5a/33befa45ca7f459b24d0c5d51d0749/frameset.htm
Hope this time it helps you.
Thanks
Mona

Similar Messages

  • How to disable or grey out a link in detailed Navigation

    Hi All,
    We have requirement in which few of the links in are to be displayed as greyed out or disabled in detailed navigation and in navigational pages. This is to stop the users from accessing the link for sometime say for a week or so.
    I have managed to grey out the link in navigational area. But couldnt find a way to do it from Detailed Navigation. If i click on the link on detailed navigation, it would open the applicaton.
    Kindly help me on how to disable or grey out a link in detailed navigation.
    Thanks
    Namit

    Hi Namit,
    Open the particular page , and select dynamic navigation (from the right hand side corner Display drop down menu ) .
    U will get all the links which r there in the detailed navigation.
    and uncheck the visible property .
    Surekha.

  • How to disable automatic opening of previously viewed items in Preview or TextEdit in Max OSX Lion?

    How to disable automatic opening of previously viewed items in Preview or TextEdit in Max OSX Lion? It was no such issue on Snow Leopard OS.
    Please help

    This is a new behavior introduced in Lion.  You can disable it completely via System Preferences, General: uncheck the "Restore windows..." box toward the bottom. 
    You can disable this behavior on a case by case basis by either closing all windows before quitting, or holding the option key while quitting, or holding the shift key while launching from dock.
    charlie

  • How to Disable caching of all SSL pages?

    May anyone can help me, how to Disable caching of all SSL pages in an web application?
    Thanks in advance.
    Balamurugan.K

    sabre150 wrote:
    kajbj wrote:
    It doesn't matter that you are using SSL if I understood your question correctly. I'm not certain but I think it does matter. As I understand it, no SSL/HTTPS pages should be cached since this could represent a security weakness. I was a bit vague. I meant that it doesn't matter what he is using under the hood since he isn't doing any "programming" if he's only serving pages. Everything should be related to configuring the server correctly, and/or using the correct header directives (not sure since I'm not a web developer)

  • TS3660 How To Disable Automatic Login

    How To Disable Automatic Login

    It is your only option if you want to get rid of that other user account. It seems the system is Hard Set to boot to that account. How and why I have not Idea but the first thing you should of done was Restoring it to the Original OS, if it was not Mt Lion to begin with, in doing so getting rid of all other accounts and files from that other account.
    Time to Bit the Bullet and Erase the drive completely and reinstall the original shipping version of OS X on that system.
    Anton Mironenko wrote:
    Reinstalling the OS would be too extreme. I already have many programs installed, and I tuned a lot of params. Data migration is another pain.
    I hope, it is possible to solve this issue in another way.

  • How to disable automatic delivery of Internet Explorer 10/11 in Windows 7, using "Internet Explorer 10/11 Blocker Toolkit"

    How
    to disable automatic delivery of Internet Explorer 10/11 in Windows 7, using "Internet Explorer 10/11 Blocker Toolkit"

    How to disable automatic delivery of Internet Explorer 10/11 in Windows 7, using "Internet Explorer 10/11 Blocker Toolkit"
    http://answers.microsoft.com/en-us/ie/wiki/ie11-windows_7/how-to-disable-automatic-delivery-of-internet/66116734-6698-4456-a5f1-5ff085eb0af9

  • How to disable automatic login and to see other accounts?

    I bought MacBook Pro Retina with Mac OS X 10.8.2 in a shop, where there already was account "kiosk".
    I created new account, gave him Administrator priviliges.
    In the Preferences / Users & Groups I see kiosk account as "Managed", and my new account as "Admin".
    I set:
    System Preferences / Security & Privacy / General / Disable automatic login = Checked.
    System Preferences / Users & Groups / Login Options / Automatic login = Off.
    But still I have two issues:
    1) After start the laptop automatically logins into kiosk account, while I explicitly switched off this option
    2) Apart from kiosk account, the OS doesn't see any other accounts, for example my new account.
    For example, when I changed login shell for kiosk account into /usr/bin/false, I couldn't login at all. The OS said something like, there are no active accounts. So I had to set login shell back to /bin/bash using single-user mode.
    The questions are:
    How to disable automatic login into kiosk account?
    How to see a choice between kiosk account and my new account in the login dialog?
    How to delete kiosk account? Currently the delete option is disabled for kiosk in System Preferences / Users & Groups.
    So far after laptop start I automatically login into kiosk, then switch into my new account with entering a password, which is weird.
    Thanks in advance.

    It is your only option if you want to get rid of that other user account. It seems the system is Hard Set to boot to that account. How and why I have not Idea but the first thing you should of done was Restoring it to the Original OS, if it was not Mt Lion to begin with, in doing so getting rid of all other accounts and files from that other account.
    Time to Bit the Bullet and Erase the drive completely and reinstall the original shipping version of OS X on that system.
    Anton Mironenko wrote:
    Reinstalling the OS would be too extreme. I already have many programs installed, and I tuned a lot of params. Data migration is another pain.
    I hope, it is possible to solve this issue in another way.

  • How can I add an iView to the Detailed Navigation itself

    How can I add an iView to the Detailed Navigation itself and hides the other hyperlinks?

    To add an iview on the Detailed navigation side of a page:
    1.Double click the page which brings up the page editor.
    2.Click the Display dropdown box and choose Dynamic Navigation.
    3.Add an ivew to it.Save and add the page to a role to see the results.
    if this is not u wanted, post back here.
    Regards.

  • Its loading a page before even i type in the right URL. how can i prevent forefox from automatically loading the suggested page before i hit enter?

    when i type in address bar, its great that the url is automatically filled in based on the history of browsing. but i dont want the page to be loading at the same instant. for ex. if i want to type thehindu.com, once i type 't' its taking for granted that i am typing thermopedia.com and completes the url and loads the page at the same time. I appreciate the url suggestion but not the page loading at the same time. this wastes my data usage (Highly inefficient).
    To complicate the problem, when i type the second letter sometimes it gets appended to the already auto completed url and heads to search for the completely messy words in the default search engine.
    Basically the addressbar has become useless and so is firefox usage. I'm completely frustrated and spoiled over an hour fighting the issue. please provide options to control the loading of the page automatically even if the url is automatically filledin.

    Try some basic troubleshooting.
    '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
    If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
    *In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
    *In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
    If Firefox is not running, you can start Firefox in Safe Mode as follows:
    * On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac: Hold the '''option''' key while starting Firefox.
    * On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    When you figure out what's causing your issues, please let us know. It might help others with the same problem.

  • How do I automatically load a page from a Flash intro?

    I've created an intro Flash movie for my website and have two
    questions:
    1) Once the movie has run its course, how do I automatically
    get the next swf file (home.swf) to automatically load after it? I
    am using Flash CS3 and will be using Dreamweaver CS3 to publish.
    2) If someone wants to skip the intro movie and go straight
    to home.swf how do I make this happen? I've created a "skip movie"
    button but am not quite sure about the code required to make the
    button work.
    I'm very new to Actionscript so this is still a bit of Greek
    to me. I appreciate any help!

    Flash CS3 is ok but r u using Actionscript 2.0 or 3.0
    if you use Action script 2.0 i can give you the solution...
    we can do the same thing in different manner but i don't know
    how you have done... but my part of idea is you can have a base
    movie and in that you can load the first intro.swf and in the end
    of that intro movie clip you can unload the current movie and load
    a homemovie in the base movie clip so that you will have more
    benefit like if they skip the intro you can just load the home .swf
    directly without loading the intro.swf. this is just a general
    idea.
    If you give a clear idea how you has created i can give you a
    better and a clear idea with the code...
    Plz specify weather it is ActionScript 2.0 or 3.0 if it is
    ActionScript 2.0 i can Help you :-)

  • How to disable autoloading of previously opened page when i open firefox ?

    When i open firefox, the last opened website automatically load
    instead of default firefox homepage. I do not want this due to privacy issue.
    This did not happen in previous versions of Firefox.
    How to disable this ?

    You can also check the startup setting:
    *Tools > Options > General > Startup: "When Firefox Starts": "Show my home page" "Show a blank page"
    Firefox 4 saves the previous session automatically, so there is no longer need for the dialog asking if you want to save the current session.
    You can use "Firefox > History > Restore Previous Session" to get the previous session at any time.

  • How to disable pre-loading of PDF documents ?

    Since the new Adobe Reader X, whenever the cursor in Windows explorer happens to be on a PDF file, Adobe Reader automatically launches two instances of its executable into the system memory, using CPU and RAM resources regardless if the user actually intends to open that PDF document or not.
    I find this behaviour undesirable and unacceptable, and I'm baffled that such a radical change would be implemented in a program without giving the user a menu option to disable it.
    Since there is no menu option, could someone please tell me how can I otherwise stop this from happening ?
    Thank you.

    Roy,
    Role and Workset Hierarchy:
    Folders F1 and F2 (Roles) are defined as entry points and therefore appear on the first level of the top level navigation bar. What happen is when we click F1 (Role), the underlying folders F1a and F1b (Worksets) appear on the second level. On click on F1a the first entry F1a (Workset) of the second level is activated and its contents (iViews) are displayed in the detail navigation and the contents of the iView is displayed in the portal page of the content area.
    And same procedure happens with F2 role on the first level of the top level navigation bar. When we click on the F2 (Role) the underlying folders F2a and F2b (Worksets) appear on the second level of the top level navigation bar. On click on F2a the first entry F2a (Workset) of the second level is activated and its contents (iViews) are displayed in the detail navigation and the contents of the iView is displayed in the portal page of the content area.
    I think need to configure levels of TLN which includes top level navigation, detail navigation and content area and then need to define the entry points.
    Below are the links for configuring levels of TLN and right below it you will find link for define entry point:
    http://help.sap.com/saphelp_nw04/helpdata/en/5a/33befa45ca7f459b24d0c5d51d0749/frameset.htm
    Hope this time it helps you.
    Thanks
    Mona

  • How to disable automatic statistics collections on tables

    Hi
    I am using Oracle 10g and we have few tables which are frequently truncated and news rows added to it. Oracle automatically analyzes the table by some means which collects statistics of the table but at the wrong time(when the table is empty). This makes my query to do a full table scan rather using indexes since the statistics was collected when the table was empty.Could any one please let me know how to disable the automatic statistics collection feature of Oracle?
    Cheers
    Anantha PV

    Hi
    I am using Oracle 10g and we have few tables which
    are frequently truncated and news rows added to it.
    Oracle automatically analyzes the table by some means
    which collects statistics of the table but at the
    wrong time(when the table is empty). This makes my
    query to do a full table scan rather using indexes
    since the statistics was collected when the table was
    empty.Could any one please let me know how to disable
    the automatic statistics collection feature of
    Oracle?
    First of all I think it's important that you understand why Oracle collects statistics on these tables: Because it considers the statistics of the object to be missing or stale. So if you just disable the statistics gathering on these tables then you won't have statistics at all or outdated statistics.
    So as said by the previous posts you should gather the statistics manually yourself anyway. If you do so right after loading the data into the truncated table, you don't need to disable the automatic statistics gathering as it only processes objects that are stale or don't have statistics at all.
    If you still think that you need to disable it there are several ways to accomplish it:
    As already mentioned, for particular objects you can lock the statistics using DBMS_STATS.LOCK_TABLE_STATS, or for a complete schema using DBMS_STATS.LOCK_SCHEMA_STATS. Then these statistics won't be touched by the automatic gathering job. You still can gather statistics using the FORCE=>true option of the GATHER__STATS procedures.
    If you want to change the automatic gathering job that it only gathers statistics on objects owned by Oracle (data dictionary, AWR etc.), then you can do so by calling DBMS_STATS.SET_PARAM('AUTOSTATS_TARGET', 'ORACLE'). This is the recommended method.
    If you disable the schedule job as mentioned in the documentation by calling DBMS_SCHEDULER.DISABLE('GATHER_STATS_JOB') then no statistics at all will be gathered automatically, causing your data dictionary statistics to be become stale over time, which could lead to suboptimal performance of queries on the data dictionary.
    All this applies to Oracle 10.2, some of the features mentioned might not be available in Oracle 10.1 (as you haven't mentioned your version of 10g).
    Regards,
    Randolf
    Oracle related stuff blog:
    http://oracle-randolf.blogspot.com/
    SQLTools++ for Oracle:
    http://www.sqltools-plusplus.org:7676/
    http://sourceforge.net/projects/sqlt-pp/

  • How to disable automatic start of SAP NetWeaver ABAP trial in Windows XP

    Hello experts,
    please, how is it possible to disable automatic start of SAP NetWeaver ABAP in Windows XP after windows startup?
    Thank you,
    Ondrej

    Right-click on "My Computer", and choose Manage.  Open the "Services and Applications" node on the tree structure on the left, double-click on "Services".  Find the service called  MAXDB:NSP  Right-click on this and change the startup type to "Manual".  Click "Apply", then "Ok".  Then go to the service labeled as SAPNSP_00 and do the same thing, setting it to manual.  That should be it.  These services will then be starting only when starting the system via the MMC
    Regards,
    Rich Heilman

  • How to disable automatic launch of WIE in startup configurat​ion with no options to do so?

    Thinkpad T400 2764CTO running Windows 7 Home Premium 64
    PC only 2 weeks old, very little on it, but getting slower and slower. Finally found the configuration for the startup menu and disabled several things I knew I didn't want at startup. One problem that I can't seem to figure out, is how to disable Windows Internet Explorer from being launched at startup? I have tried disabling every Microsoft option, and it still launches. Is there a specific Lenovo option [that does not obviously have anything to to with WIE] in the startup menu that, if disabled, will stop the WIE browser from being launched? How do I know which options are not safe to disable when attempting to slim down startup configuration for faster/more reliable performance?
    Thanks,
    Ann

    Either I *completely* misread your instructions; that fix is major overkill for what I was trying to do; that fix does not apply to my problem; that fix is only for XP or Vista and not W7; or my PC is already so messed up (despite clean hardware diagnostics, no viruses, no malware, and it is only 2 weeks old), that it performed unexpected and unwanted actions when trying to use the Windows features on/off program control panel options.
    Opened Control Panel, went to Programs, and finally found the option on the left for turning Windows features on and off. Unchecked the box for IE8, which required a restart. The restart time was 4-5 times longer than usual, even when launching superfluous programs from the startup menu, since it had to "reconfigure Windows." After restarting, WIE did not automatically launch, and its toolbar icon was gone too. Tried to turn it back on like you said, which also required a restart, which didn't make sense to me, since I expected the browser to launch again following another extra long restart once the box was re-selected. Although, surprisingly, it didn't, so for a moment thought it had somehow worked. Then I realized that my WIE icon was still missing from the toolbar, so there was no way to launch it even if I wanted to. Went back into the Control panel and checked every Windows feature box possible; another extra-long restart; still no toolbar icon for WIE. Had to go into the computer files to find WIE so that I could create a desktop shortcut icon so I could manually launch the browser from that. However, when I clicked on the shortcut, it went into a browser setup mode, as if it was being set up for the first time. Finished setup and tried to go to a webpage, but kept getting a connection error.
    Diagnosed it, and it said that the Local Area Connection had no valid IP address. Waited on hold with Mediacom for a hour before being disconnected, trying to find out what the IP address was and where to re-enter it, since unchecking the IE8 box in the Windows features part of the Control Panel, doesn't just temporarily disable the function, but apparently actually deletes the toolbar icon, as well as the IP address. Took several more attempts over several hours to get ahold of Mediacom reset the signal to get the IP address back and get back online. So that really does not seem like a viable solution for trying to save time and resources by removing something from the startup menu, if it just quadruples startup time, deletes WIE toolbar icon and IP address permanently, requires creating a desktop shortcut, and then requires several more hours on phone with ISP for signal reset to get the IP address back. Would have been much faster and done less apparent damage than just going ahead and letting it launch at startup and then just closing it. *sigh*
    I know that just having an icon in the toolbar does not mean that that particular program will launch at startup, as I have several others that have toolbar icons that I have been able to uncheck in the startup menu, so I can use the toolbar icons to launch each program manually. There just doesn't seem to be any program active in the startup menu that would be launching the browser, and still concerned about unchecking something necessary in startup that could screw it up even more.
    Is there any way to get my toolbar WIE icon back without a full system restore, so that I have less shortcut clutter on my desktop?

Maybe you are looking for