How to disable automatic resume on Satellite P100-437

Hello to all.
I bought recently the P100-437. In general I am happy with my laptop but there is an issue that I am trying to solve and unfortunately I can't.
When I put the laptop in Hibernation and close the lid then when I open the lid the laptop automatically resumes windows. This has put me into troubles when I had to pass from some security checks in the airports.
So, I am looking for a way to stop this automatically resuming on lid opening.
It is really important to do that. Do you have any suggestions or the way this can be done??
Regards,
G.

Hello idet
I think it is time to end this long discussion. First of all you can not expect any solution because solution exists just if there is some problem. But in your case there is no problem. With simply words: no problem no solution, just possibility to avoid notebook to switch ON after opening the lid.
I also understand what you want but something like this is definitely not possible. You will not find any setting for that. When you close the lid one small hidden switch is activated and when you open the lid the same switch lose connection and give a signal to laptop to start OS because laptop knows the lid is open.
I can just imagine you bring your notebook to the service and they can cutoff the cable between this switcher and main board.
I have found similar question here when one forum user asked how to disable fingerprint reader on his new Portege 400. Something like this is definitely not possible. Just cutting off physical connection can help. Maybe!!!

Similar Messages

How to disable automatic opening of previously viewed items in Preview or TextEdit in Max OSX Lion?

How to disable automatic opening of previously viewed items in Preview or TextEdit in Max OSX Lion? It was no such issue on Snow Leopard OS.
Please help

This is a new behavior introduced in Lion. You can disable it completely via System Preferences, General: uncheck the "Restore windows..." box toward the bottom.
You can disable this behavior on a case by case basis by either closing all windows before quitting, or holding the option key while quitting, or holding the shift key while launching from dock.
charlie

TS3660 How To Disable Automatic Login

How To Disable Automatic Login

It is your only option if you want to get rid of that other user account. It seems the system is Hard Set to boot to that account. How and why I have not Idea but the first thing you should of done was Restoring it to the Original OS, if it was not Mt Lion to begin with, in doing so getting rid of all other accounts and files from that other account.
Time to Bit the Bullet and Erase the drive completely and reinstall the original shipping version of OS X on that system.
Anton Mironenko wrote:
Reinstalling the OS would be too extreme. I already have many programs installed, and I tuned a lot of params. Data migration is another pain.
I hope, it is possible to solve this issue in another way.

How to disable automatic delivery of Internet Explorer 10/11 in Windows 7, using "Internet Explorer 10/11 Blocker Toolkit"

How
to disable automatic delivery of Internet Explorer 10/11 in Windows 7, using "Internet Explorer 10/11 Blocker Toolkit"

How to disable automatic delivery of Internet Explorer 10/11 in Windows 7, using "Internet Explorer 10/11 Blocker Toolkit"
http://answers.microsoft.com/en-us/ie/wiki/ie11-windows_7/how-to-disable-automatic-delivery-of-internet/66116734-6698-4456-a5f1-5ff085eb0af9

How to disable automatic login and to see other accounts?

I bought MacBook Pro Retina with Mac OS X 10.8.2 in a shop, where there already was account "kiosk".
I created new account, gave him Administrator priviliges.
In the Preferences / Users & Groups I see kiosk account as "Managed", and my new account as "Admin".
I set:
System Preferences / Security & Privacy / General / Disable automatic login = Checked.
System Preferences / Users & Groups / Login Options / Automatic login = Off.
But still I have two issues:
1) After start the laptop automatically logins into kiosk account, while I explicitly switched off this option
2) Apart from kiosk account, the OS doesn't see any other accounts, for example my new account.
For example, when I changed login shell for kiosk account into /usr/bin/false, I couldn't login at all. The OS said something like, there are no active accounts. So I had to set login shell back to /bin/bash using single-user mode.
The questions are:
How to disable automatic login into kiosk account?
How to see a choice between kiosk account and my new account in the login dialog?
How to delete kiosk account? Currently the delete option is disabled for kiosk in System Preferences / Users & Groups.
So far after laptop start I automatically login into kiosk, then switch into my new account with entering a password, which is weird.
Thanks in advance.

It is your only option if you want to get rid of that other user account. It seems the system is Hard Set to boot to that account. How and why I have not Idea but the first thing you should of done was Restoring it to the Original OS, if it was not Mt Lion to begin with, in doing so getting rid of all other accounts and files from that other account.
Time to Bit the Bullet and Erase the drive completely and reinstall the original shipping version of OS X on that system.
Anton Mironenko wrote:
Reinstalling the OS would be too extreme. I already have many programs installed, and I tuned a lot of params. Data migration is another pain.
I hope, it is possible to solve this issue in another way.

How to disable Standby/Hibernation on Satellite Pro U series

Hi,
I have on my Satellite Pro U series Windows Vista Professional installed.
During the defragmentationprocess my machine goes automatically into standby.
Does anyone know how to disable standby temporarely, so the defragmentation process can finish properly.
Edited by: Admin on 01-Dec-2007 08:13

Hi there,
to disable the Standby/Hibernation on your system you must simply go into "Control Panel" and open the "powersaver" to edit the powersaver settings.
The Powersaver contains profiles where all powersaving related settings are defined. So you can edit such profile and disable the standby/hibernation to perform your defragmentation.
Would be useful if you post which system you have..
Greetings

How to disable automatic statistics collections on tables

Hi
I am using Oracle 10g and we have few tables which are frequently truncated and news rows added to it. Oracle automatically analyzes the table by some means which collects statistics of the table but at the wrong time(when the table is empty). This makes my query to do a full table scan rather using indexes since the statistics was collected when the table was empty.Could any one please let me know how to disable the automatic statistics collection feature of Oracle?
Cheers
Anantha PV

Hi
I am using Oracle 10g and we have few tables which
are frequently truncated and news rows added to it.
Oracle automatically analyzes the table by some means
which collects statistics of the table but at the
wrong time(when the table is empty). This makes my
query to do a full table scan rather using indexes
since the statistics was collected when the table was
empty.Could any one please let me know how to disable
the automatic statistics collection feature of
Oracle?
First of all I think it's important that you understand why Oracle collects statistics on these tables: Because it considers the statistics of the object to be missing or stale. So if you just disable the statistics gathering on these tables then you won't have statistics at all or outdated statistics.
So as said by the previous posts you should gather the statistics manually yourself anyway. If you do so right after loading the data into the truncated table, you don't need to disable the automatic statistics gathering as it only processes objects that are stale or don't have statistics at all.
If you still think that you need to disable it there are several ways to accomplish it:
As already mentioned, for particular objects you can lock the statistics using DBMS_STATS.LOCK_TABLE_STATS, or for a complete schema using DBMS_STATS.LOCK_SCHEMA_STATS. Then these statistics won't be touched by the automatic gathering job. You still can gather statistics using the FORCE=>true option of the GATHER__STATS procedures.
If you want to change the automatic gathering job that it only gathers statistics on objects owned by Oracle (data dictionary, AWR etc.), then you can do so by calling DBMS_STATS.SET_PARAM('AUTOSTATS_TARGET', 'ORACLE'). This is the recommended method.
If you disable the schedule job as mentioned in the documentation by calling DBMS_SCHEDULER.DISABLE('GATHER_STATS_JOB') then no statistics at all will be gathered automatically, causing your data dictionary statistics to be become stale over time, which could lead to suboptimal performance of queries on the data dictionary.
All this applies to Oracle 10.2, some of the features mentioned might not be available in Oracle 10.1 (as you haven't mentioned your version of 10g).
Regards,
Randolf
Oracle related stuff blog:
http://oracle-randolf.blogspot.com/
SQLTools++ for Oracle:
http://www.sqltools-plusplus.org:7676/
http://sourceforge.net/projects/sqlt-pp/

How to disable automatic start of SAP NetWeaver ABAP trial in Windows XP

Hello experts,
please, how is it possible to disable automatic start of SAP NetWeaver ABAP in Windows XP after windows startup?
Thank you,
Ondrej

Right-click on "My Computer", and choose Manage. Open the "Services and Applications" node on the tree structure on the left, double-click on "Services". Find the service called MAXDB:NSP Right-click on this and change the startup type to "Manual". Click "Apply", then "Ok". Then go to the service labeled as SAPNSP_00 and do the same thing, setting it to manual. That should be it. These services will then be starting only when starting the system via the MMC
Regards,
Rich Heilman

How to disable automatic launch of WIE in startup configuration with no options to do so?

Thinkpad T400 2764CTO running Windows 7 Home Premium 64
PC only 2 weeks old, very little on it, but getting slower and slower. Finally found the configuration for the startup menu and disabled several things I knew I didn't want at startup. One problem that I can't seem to figure out, is how to disable Windows Internet Explorer from being launched at startup? I have tried disabling every Microsoft option, and it still launches. Is there a specific Lenovo option [that does not obviously have anything to to with WIE] in the startup menu that, if disabled, will stop the WIE browser from being launched? How do I know which options are not safe to disable when attempting to slim down startup configuration for faster/more reliable performance?
Thanks,
Ann

Either I *completely* misread your instructions; that fix is major overkill for what I was trying to do; that fix does not apply to my problem; that fix is only for XP or Vista and not W7; or my PC is already so messed up (despite clean hardware diagnostics, no viruses, no malware, and it is only 2 weeks old), that it performed unexpected and unwanted actions when trying to use the Windows features on/off program control panel options.
Opened Control Panel, went to Programs, and finally found the option on the left for turning Windows features on and off. Unchecked the box for IE8, which required a restart. The restart time was 4-5 times longer than usual, even when launching superfluous programs from the startup menu, since it had to "reconfigure Windows." After restarting, WIE did not automatically launch, and its toolbar icon was gone too. Tried to turn it back on like you said, which also required a restart, which didn't make sense to me, since I expected the browser to launch again following another extra long restart once the box was re-selected. Although, surprisingly, it didn't, so for a moment thought it had somehow worked. Then I realized that my WIE icon was still missing from the toolbar, so there was no way to launch it even if I wanted to. Went back into the Control panel and checked every Windows feature box possible; another extra-long restart; still no toolbar icon for WIE. Had to go into the computer files to find WIE so that I could create a desktop shortcut icon so I could manually launch the browser from that. However, when I clicked on the shortcut, it went into a browser setup mode, as if it was being set up for the first time. Finished setup and tried to go to a webpage, but kept getting a connection error.
Diagnosed it, and it said that the Local Area Connection had no valid IP address. Waited on hold with Mediacom for a hour before being disconnected, trying to find out what the IP address was and where to re-enter it, since unchecking the IE8 box in the Windows features part of the Control Panel, doesn't just temporarily disable the function, but apparently actually deletes the toolbar icon, as well as the IP address. Took several more attempts over several hours to get ahold of Mediacom reset the signal to get the IP address back and get back online. So that really does not seem like a viable solution for trying to save time and resources by removing something from the startup menu, if it just quadruples startup time, deletes WIE toolbar icon and IP address permanently, requires creating a desktop shortcut, and then requires several more hours on phone with ISP for signal reset to get the IP address back. Would have been much faster and done less apparent damage than just going ahead and letting it launch at startup and then just closing it. *sigh*
I know that just having an icon in the toolbar does not mean that that particular program will launch at startup, as I have several others that have toolbar icons that I have been able to uncheck in the startup menu, so I can use the toolbar icons to launch each program manually. There just doesn't seem to be any program active in the startup menu that would be launching the browser, and still concerned about unchecking something necessary in startup that could screw it up even more.
Is there any way to get my toolbar WIE icon back without a full system restore, so that I have less shortcut clutter on my desktop?

How to disable automatic sign in from Skype for ma...

Hi, all, there is a way to disable automatic sign in from skype for mac
1. Simply turn off internet connection of your computer.
2. Launch skype
Skype cannot sign in and you will get error screen, there you can sign in from your different account.
Peace

Another option is to sign out of the current account (under File), then uptick the box that says "Sign me in when Skype starts" before signing in again from whichever account takes your fancy.
Entia non sunt multiplicanda praeter necessitatem.

Need Vista 64-bit drivers for Geforce Go 7900 gs for Satellite P100-437

Hi,
I just installed Vista 64 and the vista driver on the site is not recognised by windows and Nvidia doesn't have a driver available on their site either. It is for a Toshiba P100-437 satellite laptop, running a Nvidia GeForce Go 7900 GS graphics card.
What do I do? Any help will be appreciated, thanks!

Toshiba does not provide any 64bit drivers; neither for Vista nor for XP.
I would recommend checking the 3rd party sites like;
www.laptopvideo2go.com
www.omegadrivers.net
Bye

Satellite P100-437, Vista and Geforce Go 7900GS

I have recently bought laptop P100-437. It was a very expensive one and was bought to play games.
Before buying it i have looked if anyone had any problems with it and i found nothing even on this forum so i decided to buy it.
It have seemed that it was a good choice.
Unfortunatly after few hours when I had run 3d mark I noticed that something is wrong.
Display driver was poor so I tried to change it.
I have only few days until I ive this laptop back to shop in exchange for some other. Probably not Toshiba and no Nvidia graphic card.
Laptop was bought with Vista32bit.
Problem is low 3d performance caused by graphic slow downs almot every 4s during which fps drop down drastickly.
THX for feedback.

Sometimes its really funny to read "Probably not Toshiba and no Nvidia graphic card". Regarding graphics card manufacturer, you have no big choice.
There are JUST Nvidia and ATI, and I promise you, they have almost the same problems in the mobile sector.
You wont solve anything by avoiding a brand, and it does not matter if I mean Toshiba, Big Apple, Nvidia, ATI etc..
Rather face your problem and dont shout around. Maybe your problem is so easy to solve and you just need the key for the resolution.
The first thing is, every manufacturer can say: This is a gaming notebook. But my experience in the last years was, that just mobile computers above 4000 $ are MAYBE good for gaming, because
the technique in these machines above 4000 bucks is the same like in my desktop which is really top-of-the-cream but costs just 1900-2400 dollars (including my 22" screen)
I just want to show you, what is really meant with expensive. Dont be dissapointed with your machine. You will be dissapointed with EVERY manufacturer, when you think you buy
a notebook which is a heavy gaming machine. NO GO!
There surely games you can play with, but dont expect TOO MUCH. And the other side are the drivers. Where did youve downloaded the drivers you mentioned?
Probably on the toshiba website. The people here in the forum are mostly downloading from sites like omegadrivers (http://www.omegadrivers.net/) which are good for mobile gamers.
Then Vista....Uh Oh, when I hear "I play games on vista", then everything in my brain begins to rotate. When will peoply DIG IT OUT!!!!! that Vista is EATING RESOURCES like H*LL!??
Please, before you start writing here, install XP on your machine and be lucky, because vista on such machine is not good. No good performance and very stressful times when you try
to play some games and you notice "Hey, something is probably wrong".
Ok, the third thing is: check which applications are running. Close as much unneeded and unnecessary apps like you can, because slowdowns on a computer system...maybe some software which is
slowing everything down.
I dont want to be offensive but it makes me really frustrating to read postings like these one, while people DO NOT WANT to use that thing in their head.
In the beginning i speaked like you, but after a while I begun to inform myself and now I can surely give you some answers.
So, lets give me some feedback and we will resolve your problem together. :)
Many Greetings

How to disable Automatic UPPER case in SQL Developer

Hi,
I am using SQL developer more than two years. I have recently downloaded SQL Developer 2.1.1.64.
My problem is, while editing the package body when move to newline the previous line get converted to UPPER case automatically. But, I don't want to get all the code I have written to be converted to UPPER case.
I have tried all possible preference changes but no change. Can you please help me how disable the case change in SQL developer.
Looking forward your response.
Thanks,
Prashantha Konkodi

You can always define how you want to format the SQL or normal text by using the keyboard CTRL+' to manage text/keyword case to all UPPERCASE, Initcap, or all lowercase.
The system remembers your settings and will keep the text the same format in future.

How to disable automatic artwork/photos on menus?

Hello,
On the iPod it automatically, shows random album art / photos in a slide show to the right on the menu screens.
How can I disable this?
Thank you,

Assume this is on an iPod Classic (you are posting in the iPod 5th gen forum)?
You can't disable it. You can set the iPod to not show the artwork but that means instead of the picture of the album cover you'll se a blank grey square instead.
The iPod 5th gen has no such split screen menu.

How to disable SATA settings on Satellite U300

How can I disable SATA setting to install Windows XPon another partition Satellite U300?
Email: [[email protected]]

Not all notebooks support such mode in the BIOS.
Possibly the U300 doesnt include such options in the BIOS and therefore you will need to include the SATA drivers into the Win OS disk if you would like to install such OS.
The SATA drivers are a part of Intel Matrix Strange Manger and you should find in ether on the Toshiba driver page or Intel page.
I used nLite to include such SATA files into the Win XP.
Bye

How to disable automatic resume on Satellite P100-437

Similar Messages

Maybe you are looking for