How to disable autostart of Enterprise Manager Cloud Control (EMC12cr2)

Hi Everyone,
I am new to Oracle Enterprise Manager Cloud Control 12c Release 2 ( EMC12cr2)
Recently, I have installed EMC12cr2 on Oracle Linux 6.3. I follow one document to install, and It was ok after the installation.
But after I reboot the testing server, I found out that it is very slow as the EMC12cr2 services are auto start at boot such OMS, and agent.
So could you please tell me how to disable the EMC12cr2 or OMS service from auto startup, so that it makes the system reboot faster.
Thanks in advance,

Take a look at this article on My Oracle Support - 1478617.1
It's a little older, but the same idea applies. There is a script in /etc/init.d/ called gcstartup, you can comment out the startup lines in there with a hashtag.

Similar Messages

How to find out Oracle Enterprise Manager Cloud Control 12c Home page

Hi all,
I have a PROD environment with OEM Cloud Control 12c and I do know its home page, but today I was wondering, what if I do not know the environment where could I get this info.
So I tried to find it out on Oracle docs and on the internet, on my environment but I was not able to find this info.
Could you guys help me?
Thanks in advance.

Hi ,
The easiest way is to run emctl status oms -details command from OMS_HOME/bin and check for the value for Console URL
example
$ emctl status oms -details
Oracle Enterprise Manager Cloud Control 12c Release 2
Copyright (c) 1996, 2012 Oracle Corporation. All rights reserved.
Enter Enterprise Manager Root (SYSMAN) Password :
Console Server Host        : myomshost.mydomain.com
HTTP Console Port          : 7789
HTTPS Console Port         : 7801
HTTP Upload Port           : 4890
HTTPS Upload Port          : 4901
EM Instance Home           : /u01/app/oracle/product/Middleware12cR2/gc_inst/em/EMGC_OMS1
OMS Log Directory Location : /u01/app/oracle/product/Middleware12cR2/gc_inst/em/EMGC_OMS1/sysman/log
OMS is not configured with SLB or virtual hostname
Agent Upload is locked.
OMS Console is locked.
Active CA ID: 1
Console URL: https://myomshost.mydomain.com:7801/em
Upload URL: https://myomshost.mydomain.com:4901/empbs/upload
WLS Domain Information
Domain Name      : GCDomain
Admin Server Host: myomshost.mydomain.com
Managed Server Information
Managed Server Instance Name: EMGC_OMS1
Managed Server Instance Host: myomshost.mydomain.com
WebTier is Up
Oracle Management Server is Up
Other way is to check in the <OMS_HOME>/install/setupinfo.txt file and check for Enterprise Manager Cloud Control URL
Regards,
Rahul

How to disable autostart (application) when managed server restart ?

Hi Ppl,
How to disable autostart (application) when managed server restart ?
I want some of the applications to remain not started. In WebSPhere, we have an option disable auto start for applications.
I don't find in weblogic.
Thanks

Hi,
I agree with Faisal. When you shutdown your WL server while the application is running, the thing is when you start your server again, it would automatically start the application with it. Now if the application was down when you shutdown the server, it _the application_ won't start with the server.
So it depends on the application last state, when you start your server.
Regards,
Mohab

Oracle VM and Oracle VM Template for Enterprise Manager Cloud Control 12c M

Hello!
After installation of *"Oracle VM 3.1.1 Media Pack v1 for x86_64 (64 bit)"* to bare hardware
can I install Oracle VM Template for Enterprise Manager Cloud Control 12c Media Pack ?
Is it the wrong plan ?
What to do if I need to set VLAN №1 ? (according note of installer I have to choose number between 2 and 4094 )
Thanks and regards,
Pavel
Edited by: Pavel on Jul 30, 2012 5:01 AM

Yes, you can install Oracle VM Manager, create a server pool with the one parent Oracle VM server in it, and then deploy the Oracle VM template in the pool. Once EM VM is up and running, you can register the same Oracle VM Manager with EM, to manage the pool.
In general, it is not recommended that you use the OVM server backend directly. But for bootstrapping the EM environment, you can also try the following:
Download the OVM Template on the Oracle VM server. From the OVM server terminal itself you can do "xm create" to spin a new virtual machine using the Oracle VM teamplate. Once the VM comes up, VNC into the VM and configure the EM OMS and agent.

Oracle VM Template for Enterprise Manager Cloud Control 12c Media Pack v1

Hello
I download Oracle VM Template for Enterprise Manager Cloud Control 12c Media Pack v1
I was checking the structure and I found this
[oracle@em12c bin]$ cd /u01
[oracle@em12c u01]$ ls
app lost+found OracleHomes oracle-template.sh scripts
[oracle@em12c u01]$ cd OracleHomes/
[oracle@em12c OracleHomes]$ ls
checkpoints db11g Middleware
[oracle@em12c OracleHomes]$ pwd
/u01/OracleHomes
[oracle@em12c OracleHomes]$ cd db11g/
[oracle@em12c db11g]$ ls
admin cfgtoollogs checkpoints diag fast_recovery_area oradata product
[oracle@em12c db11g]$ cd ..
[oracle@em12c OracleHomes]$ cd Middleware/
[oracle@em12c Middleware]$ ls
[oracle@em12c Middleware]$
The Database has all binaries but Middleware is empty
Same body knows about this issue.
Regards

Yes, you can install Oracle VM Manager, create a server pool with the one parent Oracle VM server in it, and then deploy the Oracle VM template in the pool. Once EM VM is up and running, you can register the same Oracle VM Manager with EM, to manage the pool.
In general, it is not recommended that you use the OVM server backend directly. But for bootstrapping the EM environment, you can also try the following:
Download the OVM Template on the Oracle VM server. From the OVM server terminal itself you can do "xm create" to spin a new virtual machine using the Oracle VM teamplate. Once the VM comes up, VNC into the VM and configure the EM OMS and agent.

Dbcontrol migrate to enterprise manager cloud control 12c

Currently we are using Oracle 11gR2 database in our enterprise and manage them with EM database control.
We're planning to migrate to centralized management with oracle enterprise manager cloud control 12c.
Is it possible to manage DBs both ways, with db control AND using EMCC agent simultaneously?
Is there a easy way to migrate db control managed DBs to be managed by agent?
I've searched EM documentation but didn't find any topic about this job.

Hi P2
Yes You can manage DB from both. But why you are going to use EM instead of Cloud Control 12. You Can do each and every work from it more tan EM. Cloud Control 12c is very good tool.
No. But You can easily setup them using manual agent push or auto discovery method from cloud control 12c. You need to create password less ssh login to both side for oracle user and open the relevant ports from network. It is very easy. After add agent you can add targets from relevant hosts easily.
Thanks
Dilshan
Edited by: user11923797 on Dec 24, 2012 10:39 AM

Enterprise manager cloud control 12c issue configuring Target Disconvery

I've performed a silent agent install of Oracle Enterprise Cloud Control Agent 12c on the first node of a RAC two node cluster (oracle 11gR2) on Red Hat Linux 5.6 64bit.
oemgrid>./emctl status agent
Oracle Enterprise Manager 12c Cloud Control 12.1.0.1.0
Copyright (c) 1996, 2011 Oracle Corporation. All rights reserved.
Agent Version : 12.1.0.1.0
OMS Version : (unknown)
Protocol Version : 12.1.0.1.0
Agent Home : /emcc/agent12c/agent_inst
Agent Binaries : /emcc/agent12c/core/12.1.0.1.0
Agent Process ID : 31354
Parent Process ID : 31302
Agent URL : http://rac1.respecti.com:3872/emd/main/
Repository URL : https://emcc.respecti.com:14511/empbs/upload/
Started at : 2011-10-25 16:36:47
Started by user : oemgrid
Last Reload : (none)
Last successful upload : (none)
Last attempted upload : (none)
Total Megabytes of XML files uploaded so far : 0
Number of XML files pending upload : 1
Size of XML files pending upload(MB) : 0
Available disk space on upload filesystem : 91.95%
Collection Status : Collections enabled
Last attempted heartbeat to OMS : 2011-10-25 16:36:52
Last successful heartbeat to OMS : (none)
Agent is Running and Ready
However from OMS server (OECC 12c)
From Setup -> Add Target -> Configure Auto Discovery
Configure Auto Discovery -> Database - Listener -> Agent Based -> Configure
Add Host -> Target Type = Host
Target Name = rac1
Host Name = 192.168.1.12 -> Search -> AND NO TARGETS FOUND
Why
Recommendations Appreciated!

If I am understanding correctly, you are looking to discovery a RAC DB on a host on which you deployed an agent. The auto discovery configuration you mention is used to configure the frequency of automatic discovery on a given host after the initial deployment. Normally, you do not need to do anything in this screen.
Immediately after initial installation and successful registration, the agent will search the host automatically for database installations and report its findings to the OMS. These results can be seen in Setup->Add Target->Auto Discovery Results on the Non-Host targets tab. Here you can search by host and you should see a Cluster Database target. To get the target under management, select it and click Promote and follow the wizard.
You can also initiate a discovery of databases on a host by going to Setup->Add Target->Add Targets Manually. Select Add Non-Host targets using Guided process. Select target type in drop down of "oracle database, Listener and Automatic Storeage management". The click Add Using Guided Discovery. Here the agent will immediately scan the host and show the results which you can then complete the target addition process.
If I am misunderstanding you please let me know.
Dave

Deploying a VM Guest within enterprise manager cloud control

Hi,
I have setup cloud control 12C completely, but when I try deploying a VM, the job remains in scheduled status with no progress.
i can create and install VM with OVM manager without any problem.
I have tryed this with OVM manager 3.0.1 and 3.0.2 none of them worked.
any idea

Yes, you can install Oracle VM Manager, create a server pool with the one parent Oracle VM server in it, and then deploy the Oracle VM template in the pool. Once EM VM is up and running, you can register the same Oracle VM Manager with EM, to manage the pool.
In general, it is not recommended that you use the OVM server backend directly. But for bootstrapping the EM environment, you can also try the following:
Download the OVM Template on the Oracle VM server. From the OVM server terminal itself you can do "xm create" to spin a new virtual machine using the Oracle VM teamplate. Once the VM comes up, VNC into the VM and configure the EM OMS and agent.

How to install Enterprise Manager Cloud Control on Oracle Linux 6.2

Anoyone know if it's possible to install this product to Oracle Linux 6.2 ?
I have an error with this librarie : glibc.i686 : The GNU libc libraries
Thank You!

Anyone know if it's possible to install this product to Oracle Linux 6.2 ?It's not certified on OL6, so you will be on your own, support-wise.
I have an error with this librarie : glibc.i686 : The GNU libc librariesAre you on a 64-bit platform? You probably don't have the 32-bit libraries installed. Assuming you are registered with ULN, or http://public-yum.oracle.com do this:
# /usr/bin/yum install -y glibc.i686Expect to get a lot of RPM's. Expect to do this again a few more times with other packages as well. Even then it may not work; best of luck.

Oracle Enterprise Manager Cloud Control v12.1.0.3.0

Is it possible to install the oracle agent in db server with ORACLE 10?
There is any workaround, I would like to monitor also dbserve oracle 10 with em12c agent.
Thanks,

Hi,
12c agent is certified to monitor following 10g managed Db targets (10.2.0.5.0,10.2.0.4.0,10.1.0.5.0)
Below is the complete list for certified DB managed targets with 12c agent
10 Releases(12.1.0.1.0,11.2.0.4.0,11.2.0.3.0,11.2.0.2.0,11.2.0.1.0,11.1.0.7.0,10.2.0.5.0,10.2.0.4.0,10.1.0.5.0,9.2.0.8.0)
Regards,
Rahul

Oracle Enterprise Manager Cloud Control 12c Release 1 (12.1.0.1) for Window

Hi,
When we run the setup.exe (Disk 1) on windows machine, Installation Wizard does not appear. So we couldn’t go ahead further steps for the installation. Please help us.
Thanks,
Jebastin.

I have see similar issue...
Please validate whether there is any Anti Virus installed on your Windows machine...
If it is installed, disable it temporarily... The Anti Virus typically blocks such Installers.exe which are about to generate more than 65535 files...
Second possibility can be you don't have enough permission i.e. you don't have Admin permission on this Windows machine...
Third possibility can be that the installer in itself might be corrupt...

How to configure Enterprise Manager Database Control (EMDC) to make it work on 2 servers working (primary and standby) under DG rules

Hello everybody i use Oracle Database EE 11.2.0.4 with DG.
In those cases i need to get Enterprise Manager Database Control running against DB with no RAC and no DG i perform the following steps:
I Logon SQLPLUS as user SYS or SYSTEM, and drop the sysman account and management objects:
DECLARE
CURSOR c1 IS
SELECT owner, synonym_name name
FROM dba_synonyms
WHERE table_owner = 'SYSMAN';
BEGIN
FOR r1 IN c1 LOOP
IF r1.owner = 'PUBLIC' THEN
EXECUTE IMMEDIATE 'DROP PUBLIC SYNONYM '||r1.name;
ELSE
EXECUTE IMMEDIATE 'DROP SYNONYM '||r1.owner||'.'||r1.name;
END IF;
END LOOP;
END;
DROP USER mgmt_view CASCADE;
DROP ROLE mgmt_user;
DROP USER sysman CASCADE;
After that i run
emca -config dbcontrol db -repos recreate
But what should i do in cases i have 2 servers working (primary and standby) under DG rules?

Hi ,
It is not possible to monitor/administer a Logical or Physical Standby database, i.e Data Guard, using Enterprise Manager Database Control. This is primarily due to the fact that Database Control is designed to monitor 1 database and a Data Guard environment, by definition, includes more than 1 database.
If you attempt to run emca against a standby Database, you will get an error like (i.e. ORA-01219: database not open).
Database Control, can, of course, be used to monitor the current Primary database (with no ability to administer or monitor Data Guard related functionality). In such a case, when failover occurs Database Control must be reconfigured to run on the new Primary database using the commands detailed in Note 278100.1 How To Drop, Create And Recreate DB Control In A 10g Database, section C. Recreate/ReConfig DB Control, Option 2. Recreate the DB Control Configuration Files and Repository.
Enterprise Manager Grid Control or Cloud Control provides the functionality for viewing, monitoring, and administering primary and standby databases in a Data Guard configuration.
Reference: Is it Possible to Configure Database Control for a Logical or Physical Standby Database? (Doc ID 315116.1)
You can use EM 12c cloud control to monitor and manager Standby DB effectively
Ref to below link for details
Set Up and Manage Oracle Data Guard using Oracle Enterprise Manager Cloud Control 12c
Regards,
Rahul

How do I create a new emkey for Enterprise Manager Database Control?

Hi,
I just installed 11gR2.
I am evaluating it.
How do I create a new emkey for Enterprise Manager Database Control?
I tried various combinations of this command:
emctl config emkey
I did find a probable bug:
$ emctl config emkey -emkey -emkeyfile emkey.ora -force -sysman_pwd he11ow0rld
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
Undefined subroutine &EmKeyCmds::promptUserPasswd called at /u2/app/oracle/product/11.2.0/dbhome_1/bin/EmKeyCmds.pm line 160, <FILE> line 3.
$
Again,
How do I create a new emkey for Enterprise Manager Database Control?
I do have a copy of my old key but it is no longer good because I reinstalled the repository with these commands:
emca -repos drop ...
emca -repos create ...
Oh, and where is emctl "documented".
I poked around in some book-index links and with the search engine.
I could not find anything.
Thanks,
-Janis

user11892726 wrote:
Oh, and where is emctl "documented".
http://download.oracle.com/docs/cd/B16240_01/welcome.html

How to install the Oracle Enterprise Manager Database Tuning ?

Hi,
How to install the Oracle Enterprise Manager Database Tuning with the Oracle Tuning Pack
Release 9.0.1
And where to get download this.
Thank u..!

The only way you can get 9iR1 release software is by asking it to your Oracle representative. The oldest 9i release available for public download is 9iR2.
You could try the administrative 9iR2 client, it can work with 9iR1 releases.
~ Madrid.

How to view/ammend jobs in DBA_JOBS using Enterprise Manager (Database Control)

Dear Gurus,
We are using Oracle 10gR2 on Widwos OS. We defined couple of jobs using DBMS_JOBS and i can see them using DBA_JOBS view, how can we view/amend these jobs in Enterprise Manager (Database Control)?
Regards,
Riaz

Riaz wrote:
Dear Gurus,
We are using Oracle 10gR2 on Widwos OS. We defined couple of jobs using DBMS_JOBS and i can see them using DBA_JOBS view, how can we view/amend these jobs in Enterprise Manager (Database Control)?
Regards,
Riaz
In V10 which is no longer under support DBA_JOBS was superceded by DBMS_SCHEDULER.
Why are you dependent upon EM to manage the DB?

How to disable autostart of Enterprise Manager Cloud Control (EMC12cr2)

Similar Messages

Maybe you are looking for