How to disable Cool N Quiet driver when it isnt in the bios or registry for Roxio game capture?

1. HP G60-120 US Notebook PC
2. Windows 7 32-bit
3. No error messages
4. No changes before issue occured.
I was told by Roxio (company of the capture card I bought to record gameplay on my Xbox) to call HP and get my Cool N Quiet driver disabled after I updated my other drivers and still had problems with my capture card. Can somebody tell me where to find it other than in the registry and bios because it is NOT in there and I have looked already more than 5 times or if you know where I can get it remotely disabled. HP cannot remotely disable it because I just talked to them and they don't have the power to do that.

Quote
Originally posted by kensterman
Does Cool n' Quiet need any software for it to work, or does the CPU/Fan slow down automatically?  I notice that I have to use MSI's Core Center to activiate Cool n' Quiet.  Anyone??
No, Corecenter is almost useless and is NOT needed to "activate" Cool n Quiet.  The best it can do is tell you fan speed and temps, and even that is questionable.  It will also tell you clock speed but you can get that from right clicking "My Computer" choose Properties, go to General tab, note mhz displayed there.  If it is about half of full clock speed for your CPU, then CnQ is working right.  If it shows full clock speed, then CoolnQuiet is NOT working and you need to re-read Mr. Woo's original post which gives details about how to enable it.  
Next, about fan speed.  You have to understand that CnQ does not have anything to do with fan speed directly. Unless you have fan speed control disabled in BIOS, then your fan is going to control as you described whether you have CnQ enabled or not. In BIOS, in the H/W Monitor section, there is a place to enable or disable fan speed control - it's called CPU Smart Temperature Monitor or something like that.  
As long as it is enabled and your fan is compatible and hooked up right, the fan will ramp up and down to control temperature. This is independent of CnQ.  And it is independent of Corecenter.  Disable CnQ and shutdown CoreCenter, the mobo still controls fan speed.  

Similar Messages

  • 1.9 bios, disable Cool n quiet = no boot.

    Hi Guys,
    Recently flashed to 1.9 bios, which although seems to take longer to boot, has given me 1t timings and 400mhz ram speed with my San diego core, so on that side i'm happy and my pc seems to be running sweet.
    However after tweaking my bios settings after flashing (disabling unused resources, tweak ram timings etc etc) i've noticed that if if DISABLE cool n quiet in the cell menu, when i try and boot up, I get to the windows logo screen and my comp just freezes. Only way to get out is to hit hold reset switch in.
    If i go back in to cell menmu and enable cool n quiet in bios (changing nothing else at all) then I can boot up fine.
    I haven't loaded to cool n quiet drivers and don't really want to use it, I haven't gone into windows power management and changed anything there either, so i just want to disable it in bios if i'm not using it.
    Any one have any ideas.

    You could just leave it on auto and don't use any power saving schemes (choose always on) and don't load the AMD cpu driver .
    Then CnQ should not be active .
    Or you could flash to 1.A3 , it's supposedly being fixed there .

  • COOL N QUIET DRIVER FOR XP PLEASE HELP

    I have via k8m800/k8t800 Pro + 8237 Chiipset board. I have enabled Cool and Quiet in BIOS. How do I install the driver in WIN XP? I have the one that comes along with a CD but there is no intaller. Please help because I'm pretty new to  all this hardware stuff 

    Thanks, I've downloaded and installed it but there's no graphical interface, it only unzipped the .sys and .cat files into a folder in my program files. I have also enabled cool an quiet from my BIOS. I'm pretty lost at this moment, For example...there is a setup file for the other OS's but not for XP for the cool and quiet driver in my CD. So how do I install the .sys and .cat files on my OS

  • MSI K8N Neo3 how to install cool n quiet

    can any one tell me how to install cool n quiet on k8n neo3.
    is core center enough to do the job of cool n quiet.
    Is my board is compatible with cool n quiet
     I am using AMD athlon 2800+ and k8n neo3with MSI FX5200 VGA card

    Refer to page 1-9 of your manual.
    Enable the feature in the bios.
    Select "minimal power management" in Windows power schemes.
    You don't need to install core center for it to work, it just lets you visually know it's working.  AMD also has a small utility to visuallize the CPU throttlling.
    To allow the CPU fan to automatically speed up or down, enable "smart CPU fan target" in the bios.
    Hope this helps.

  • HT1660 My itunes library has automatically started to list my songs alphabetically.  I do not want this.  How do I change it so that when albums come up, the songs are listed in the order of the imported album, NOT alphabetically.

    My itunes library has automatically started to list my songs alphabetically.  I do not want this.  How do I change it so that when albums come up, the songs are listed in the order of the imported album, NOT alphabetically.

    For the missing Artists on your iPod, make sure their tracks in iTunes are not marked as "Part of a compilation" in iTunes. You can do this by highlighting the track, right->clicking on them and choosing "Get Info" from the shortcut menu. When the window pops up, head over to the Info tab and make sure there is NO tick mark next to this option in the lower right hand corner. Lastly, sync the updated changes to your iPod.
    B-rock

  • I have an Iphone 4S, when I am on the phone and I get a new message my phone vibrates and rings. How can I stop this from happening when I am on the phone

    I have an Iphone $S, when I am on the phone and I get a new message my phone vibrates and rings, How can I stop this from happneing when I am on the phone

    Flip the Ring/Silent switch. Make sure Vibrate when silent is off in Settings>Sound.

  • In windows 7, how do I make firefox start automatically when I turn on the pc.?

    In windows 7, how do I make firefox start automatically when I turn on the pc

    That worked, thanks. When I turn on the pc, I almost always go to the internet before anything else, so this eliminates one step. It doesn't seem to save any time, however, but it is easy. If anyone else wants to try this, it looks like it's very easy to undo if you change your mind.

  • I made a video series on one time line and now want to copy paste sections into other tiemlines so I can separate the series into distinct videos to upload. How do I get new timelines? When I go to new event it asks for import footage.

    I made a video series on one time line and now want to copy paste sections into other tiemlines so I can separate the series into distinct videos to upload. How do I get new timelines? When I go to new event it asks for import footage.

    You seem to be new to this software, so I highly recommend that you take some time to learn it using some great tutorials available online - it will pay off to invest the time, if you follow through, for example the great (and free) introductory tutorial at izzyvideo.com.
    This is an amazing piece of software, and you'll have a lot to learn, but it's well worth it.

  • How do i eliminate talking tom cat when it wont download the 20mb.  It sits waiting for WiFi and my Pc to hook up. No wifi hook up at home

    how do i eliminate talking tom cat when it wont download the 20mb.  It sits waiting for WiFi and my Pc to hook up. No wifi hook up at home

    So you started downloading it and it won't finish? Hold the home (circle) and lock (top of phone) buttons at the same time untill a power off slider comes up. Turn off your phone and when you turn it back on it will ask you for your password to restart the download. Click cancel and it should cancel the download.

  • HT201250 Time Machine cannot find my external back-up drive when I click on the "select disk" button.  No drive is found. I have run a Time Machine back-up to this external drive in the past.  I'm on the latest version of Snow Leopard.  Thank you!

    Time Machine cannot find my external back-up drive when I click on the "select disk" button.  No drive is listed. I have run a Time Machine back-up to this external drive in the past.    Any suggestions

    Does the disk appear in Disk Utility?

  • How do I access recorded meetings? when I click on the 'meetings' tab it says I don't have permission

    how do I access recorded meetings? when I click on the 'meetings' tab it says I don't have permission

    Meeting recordings will have a direct URL, just like meeting rooms and content within Connect. You likely not a member of the Meeting Host group or Admin group within that Connect account, so you don't have the permissions to access the Meeting Library.
    You will either need the Host of the meeting room that you are looking for the recording of to get you the link, and insure you have the correct permissions to view it, or have them move the recording to the Content Library where it can be placed in a folder that you have permissions to view.

  • I have upgraded my software to OS X Snow Leopard. Now I want to update that to Lion. How do I do that? When I look at the Lion software available for download on the apple site it all seems to be update software for people already a version of Lion.

    I have upgraded my software to OS X Snow Leopard. Now I want to update that to Lion. How do I do that? When I look at the Lion software available for download on the apple site it all seems to be update software for people already a version of Lion.

    It has to be 10.6.8 I believe, before you can upgrade to Lion. I found some more info, please check out: http://www.informationweek.com/byte/howto/personal-tech/desktop-os/231001728
    Be sure all your programms will work on Lion. Power PC programms do not work anymore (eg Nikon Scan 4 will not work from now on on Mac OS X). Some versions of Canon utilities for camera's do not work, Canon still have to upgrade. For an App Compatibility Table: http://roaringapps.com/apps:table

  • When will Apple give the Battery Percentage option for the iPod?

    When will Apple give the Battery Percentage option for the iPod?

    It's hard to tell since Apple has never included it in all generations of the iPod and I assume you mean the iPod Touch.
    Apple could place it in the sixth generation iPod Touch but Apple has been pretty tight lipped on the possiblity of one coming. It's been since 2012 when the fifth generation arrived in the fall so the iPod lineup is due for an upgrade. Some reports say it won't come this year and others say different. But with the new iPhone expected to debut with larger screen it is still possible the new iPod will come with a larger screen alongside the new iPhone. It happened back in 2012.
    But no one really knows. Until then download an app to measure your battery percentage. I have battery doctor and it's really useful to determine how much battery my iPod has left and it also can clean up your memory and any junk files.

  • Error "No drive attached to fastrack controller, the bios is not installed"

    Having recently purchased a K7N2 Delta mainboard I now get the above error displayed during bootup. Shortly after the message has been displayed the windows boot process hangs.
    What have I done wrong or what havn't I done right?
    My system spec is:
    Athlon 2500xp
    80 gig Maxtor HDD
    1024 DDR ram (single stick)
    XP Professional
    N-vidia graphics 440
    regards
    Technomarv

    Hi,
    Technomarv:
    Listen to what others are saying! "The BIOS not installed" message is NOT a problem My machine says this EVERY time I boot Up! There is obviously something else wrong.
    You say:
    Quote
    The problem does not appear to be with the boot sector as when I put the hard drive into another machine it boots perfectly. Once back in MSI machine the boot process hangs again. I therefore find it difficult just to ignore the PC when it tells me "The bios is not installed".
    Am I to understand from this that your trying to boot the same hard drive using two different motherboards? If so - I'm not surprised it doesn't boot! It is advisable to do a full and new install of your OS - to your HD - when installing a new board.
    You can't just move a hard drive from one machine to another and hope a boot will be successful (this can only be done when the motherboard and or add-ons are the same or very similar).
    Axel  

  • I just purchased a movie and finished the interrupted download today. However when I look in the My Purchases section for movies I don't see it. Please help. Thanks

    I just purchased a movie and finished the interrupted download today. However when I look in the My Purchases section for movies I don't see it. Please help. Thanks

    Your receipt for all apps, free or otherwise, will say "purchased". The Starbucks app is free.  In the app store itself, the apps will clearly state their cost or "Free".

Maybe you are looking for

  • SharePoint Foundation 2013 installed on Windows Server 2012 not sending out email notification

    I have a server where i installed SP Foundation 2013 on top of Windows Server 2012. I have configured the SMTP as well as the outgoing SMTP in Central Administration of SharePoint. When i create an alert on a document library, its did not sent any em

  • Moving Lossless files to an external drive

    How do I move Apple Lossless files to an external drive & still have iTunes know about them? When I started ripping my CD collection I encoded them with Apple Lossless. Then I converted each track to AAC. Why? Well, on the basis that I wanted to have

  • Error number: 10500 E_fatalError

    Hi I have installed Oracle service registry as a Standalone Configuration, but I'm getting the following error when I try to access the Business control. In also checked the error log but there is nothing regarding this. Error number:      10500 Erro

  • Train stop label wrapping issue?

    Hi, I have a vertical train in my page and it renders like the following: * Step 15 Update Service Request * Step 16 Create Test Manual Request * Step 18 Create New ITAS Softward Change Record What I want is that the text in each train node DOES NOT

  • Macbook Pro is SLOW as ****!!!

    I'm getting really annoyed with my Macbook! First of all, it's really really slow! Something always seems to be accesing the hard drive causing it to spin constantly. I'm always seeing the bloody beach ball and i'm always waiting for the computer to