How to disable coupling between audio tracks and environment objects?

I would like my environment to remain static. When I delete tracks on the Arrange page the corresponding environment objects dissappear. Is there any way to defeat this?
I couldn't find an answer in the L8 manual. Environment objects continue to disappear even when I "protect cabling/positions"

Yep, you need to turn off LP8's new "Auto-manage audio objects" function in the prefs.
Now, as in all previous versions of Logic, you can create whatever audio objects you need in the environment, and they will all stay there like good obedient little objects.

Similar Messages

How to import 2 separate audio tracks and keep them separate?

I need advice about importing two separate simultaneous audio tracks and keeping them separate. I am importing footage from my Sony PDX-10 DV Cam.
In the field I had wireless microphones on two people, a man and woman. I interviewed them separately. The man was on channel 1 and the woman was on channel 2.
While shooting the man, for example, I could also hear the open mic of the woman who was maybe a block away talking to some friends. But her distracting sound was on CH 2 and in playback on the camera, if I dial down the volume of CH 2, I no longer hear the woman and I have a clean audio track, Ch 1, of the man who is being filmed.
I'm trying to import the interviews into iMovies with only the relevant track turned up and the distracting track turned down. When I listen to the audio from the camera on my headsets, I can get clean sound of just the person who is on camera. But the FIREWIRE seems to grab both tracks, even though in playback i'm listening only to the clean track.
Does anyone know how I can send just one audio track to IMovie? Any way to prevent the Firewire from importing both Ch 1 and Ch 2 at the same time?
I only want the sound that's relevant to the person who is on camera. And I know that in the camera, it's possible to listen to just the track from one channel. I'm hearing just one track through the headsets, because I can sucessfully dial down the other track. That's the way I want to import the footage to iMovie. But the FIrewire seems to grab all the sound it can find and carry over both CH 1 and CH 2, which means I'm left with a jumble of sound that is not useful.
And finally, if the firewire needs to grab both tracks, is there a way to assign them to two separate tracks in iMovie, so I can then simply turn one of the tracks off?
iMacG5 Mac OS X (10.3.9)
iMacG5 Mac OS X (10.3.9)
iMacG5 Mac OS X (10.3.9)

welcome finecut to the  boards of discssions ...
nope.
iM handles the two stereo-channels as "one track", and offers 3 tracks of stereo.. (the one inside the video, 2 additional tracks...)
I would... :
* export clip(s) share/Quicktime/Expert Settings/aiff..
* in a designated audio processor (Garageband, Audacity, ...) seperate the two channels, creating two "new" ones, stereo, where one channel is located in the stereo middle..
* import these two "stereo" files into iM, into Track2 and Track 3 ...
.. boom!done

How to disable syncing between .Mac mail and Mail.app?

Howdy everyone,
I'm trying to get my wife's 'new' (aka hand-me-down) 12" PowerBook set up the way she likes it. She uses .Mac Mail, and mostly uses the webmail portion, rather than the Mail.app. Anyway, she's presented me with a question that's stumped me - she wants it set up so that when she deletes a message from .Mac webmail, it stays in her Mail.app Inbox, and vice-versa. I guess you could say that she wants Mail.app to retrieve the messages from .Mac, but doesn't want their mailboxes synced.
Any ideas? I'd fiddled with the settings but can't make it work that way. I have a strong feeling that its right in front of me, but I just can't see it...
Any help would be great!
Thanks,
Huxley

A .Mac type account with the Mail.app is really an IMAP type account and behaves in the same way.
Personal preference but FYI, webmail access is primarily designed when away from your computer and email client needing to access your email account when using a computer with internet access that is not your own.
For what your wife wants, she needs to access her .Mac account as a POP type account with the Mail.app. You can access a .Mac account as a .Mac, IMAP or POP type account with the Mail.app and as an IMAP or POP type account with other email clients.
This will require deleting and recreating the account in Mail selecting POP as the account type when the account is recreated.
All messages that remain on the server will not be affected by this but any messages sent by the account with the Mail.app that are not stored on the server will be deleted when deleting the account in Mail.
If there are any messages in the account's Sent mailbox that need to be saved, transfer all messages from the account's Sent mailbox to a user created "On My Mac" location mailbox before deleting and re-creating the account.
After re-creating the account in Mail as a POP type account, go to Mail > Preferences > Accounts and under the Advanced tab for the account preferences is a setting for removing messages from the server when downloaded. This should not be selected so no messages will be removed/deleted from the server when downloaded by Mail.
Deleting a message from the server via webmail access for the account will have no effect on messages already downloaded from the server by Mail.

How can I edit imported audio track? After selecting and deleting region and joining remaining parts, it keeps playing the track with the deleted part! What am I doing wrong?

How can I edit imported audio track? After selecting and deleting region, and joining remaining parts, it keeps playing the track with the deleted region!
What am I doing wrong?

After selecting and deleting region, and joining remaining parts, it keeps playing the track with the deleted region!
What am I doing wrong?
How exactly are you doing this?
When I cut out a part of an audio region, then drag the remaining parts together, so they are touching, the track will skip the cut out section when playing the file. Also, if I select the remaining parts of the region and use the command "Edit > join regions". This will create a new audio file with the cut out part deleted.
You should see this prompt, when you are joining the regions:

How do I seperate the audio track from the video and save it to a CD in Premiere Elements 13?

How do I seperate the audio track from the video and save it to a CD in Premiere Elements 13?

Binbashi
You can separate the audio track from video and save it to a DVD disc within Premiere Elements but not a CD disc.
To do save to the audio to DVD disc, you do not have to separate linked audio video, just use the export Publish+Share/Computer/Audio and set Presets to the wanted format (AAC, AIFF, MP3, or Windows Waveform (WAV).
You will not see Audio in the choices since it is at the bottom of the list of choices under Publish+Share/Computer/. You will need to use the thin scroll bar to the right of the choices to scroll to it.
If you need information on selective export of Timeline content when dealing with more than just this one file on the Timeline, please let us know. If you are trying to produce a CD for listening in car or CD player elsewhere, please let us know.
Looking forward to learning of your results.
Thank you.
ATR

How can I delete the audio track from a clip and have no audio associated?

the clips I insert always add an audio track,and seem to be linked to video track.I just want to delete audio tracks,and have no audio track associated with the original clips .
How do I do this ???

Second time this question came up today.
Click the a1/a2 buttons in the patch panel at the head of the timeline to decouple the audio from A1/A2. Then edit the picture into the timeline.

How can I keep my audio track, delete a short segment of video, and reinsert a new video clip, without changing the audio with the way it lines up with the original video?

How can I keep my audio track, delete a short segment of video, and reinsert a new video clip, without changing the audio with the way it lines up with the original video?

If you have either iMovie 09 or iMovie 11 you can do this easily using the Cutaway feature.
Go to iMovie/Preferences and make sure that the Advanced Tools are enabled.
Now you jut drag and drop the 2nd clip onto hte first clip at the frame where you want the Cutaway to start. A popup menu will appear. Choose Cutaway.
Here is a good Tutorial.
If you have iMovie 08, let me know. There is a way to do it, but it is more complex.

How can I use ALL audio tracks in multiclip editing?

I want to be able to use all audio tracks after the multiclip cut.
It's only a two camera shoot, but I want to be able to use the ambient room sound from the second camera ... and control its level (in relation to the master audio track on the first camera) AFTER the cuts are made.
Is this possible in multiclip editing? And how does one go about it?
Apologies. I've spent an hour or so in the manual, and it isn't clear ... or I'm just not finding the right reference.
All ears,
Ben

Sorry if I'm steering you down a path you don't want to go or even if there's a better way but I wouldn't be ding complex audio mixing anywhere near the multiclip interface. Export your reference movie or nest the multiclip project into another sequence, bring in your additional tracks, get to work. Just my preferences, I put a bunch of rough keyframes in the audio tracks and enter some markers (and make a lot of paper notes). Then I go back using the large mixer window to do the fine tweaking.
Stick around for a couple of days, some other multiclip users with more experience than I will offer some more useful suggestions.
bogiesan

Blank audio between audio tracks

I am making a movie to include audio. I've imported audio without problem but want to keep a few sections of the video without any audio at all. I have not been able to do this.
Is it possible to fill in sections with nothing, i.e. placeholders, between audio on the audio track and if so, how?
Thanks,
Ken

I'm having a major problem with the narration and soundtrack files. I'm a computer teacher using Adobe Premiere 4. My students created a slideshow in Photoshop Elements 6.0 and imported it into Premiere. They also imported narration wav files that are part of the project (It's a digital story). While in timeline view, we drag the narration files onto the narration line to coincide with the video images. At random times, and for no particular reason, the program creates gaps between the images. When we try to drag the images back into place, more gaps appear.
We've tried many different ways of doing this, but these gaps just continue to appear. The program also creates gaps when we use the time stretch tool to change the amount of time each slide remains in view. In order to properly create a digital story, the timing of each slide is important.
Also, when we add a song to the soundtrack, this problem occurs as well, but only when there is a file in the narration track.
Can anyone help with this?
Thanks,
Pam

How can I export an audio track with just the effect signal without the audio?

I want to export dry audio tracks and their effects signals as separate tracks. For instance a track with a reverbed snare would be one track with the dry snare and one with just the reverb.
I know from people who use Reason that it's just a box you need to tick, but I'm struggling to find out how to do it in Logic. Surely it must be a way?

I don't remember Reason being that straight forward, but the obvious way to go, is to mute all sends and bounce.
Then solo the reverb channel, in aux, checking it isn't shared by other sources, and bounce. You should have a dry and a reverbed signal, at your convenience.

How to create a specific audio track in arrange

There's gotta be something simple I'm missing. In Logic 7 you could create an audio track in the arrange and then click to open a drop-down menu to select any audio track number you wanted to assign it to.
I don't see how to do that in 8.
All I'm trying to do is create an audio track of audio 9 in the arrange. Currently, 4, 6, 7 and 11 are in the arrange. I can go to number 7 and hit "new track with next channel strip" until 9 shows up and delete the rest (it starts by adding 1, which currently isn't used, etc., 'til it gets up to 9) but that can't be the only way to do it.
Can someone give me a tip?
Thanks!!

Desha Dunnahoe wrote:
There's gotta be something simple I'm missing. In Logic 7 you could create an audio track in the arrange and then click to open a drop-down menu to select any audio track number you wanted to assign it to.
I don't see how to do that in 8.
Simply create the new audio track, and the control/right click on that track
You'll see "Reassign Track Object" > Mixer > Audio >
and from there you can select specifically what audio track you want that new track to be.

How do you "UNLINK" the audio tracks?

I have had LOGIC now for about 3 weeks. I am learning tons and enjoying the program overall. I have received some great help from this forum. My latest adventure is creating more audio tracks. I found out recently from this forum that I had the settings in my LOGIC setup. I increased the number of audio tracks that I can use. My current question is, If I need more audio tracks in a project, I click on an audio track and then go to the Track>Create Multiple Tracks menu. I can import as many as I need.
The problem I am having is, when I create the tracks, they are somehow "linked" to whatever track that I clicked on when I choose to create the new tracks. I have tried changing the track and midi channels in the LH side of the arrange window, but when I change one track, the other one changes also. I don't know how to separate them. Is there some way to do that? ALSO>>>> Is there a way to create new audio tracks without having to click on an existing track first?
Thank you for your consideration.

The fastest way I know is to 1)- open the track mixer window, 2) click on the global button - to turn it on, 3) click on track button - to show all available tracks, 4) double click on an unused track, this will put a new track into the arrange window.
Turning off the global button in the mixer window and selecting the parts you want to display (Track, Instruments, MIDI, auxs, busses, etc) will show you the active tracks you have in the arrange window.
Regards
BB

MP3 audio tracks and Internet Explorer

Hi
I've dragged a couple of audio tracks into iWeb. When published, these appear fine on my Mac using Safari, Chrome and Firefox and the play bar starts and stops the tracks ok. However, each track's play bar appears simply as a box with a cross in it when viewed using Internet Explorer on a Widows machine. The tracks can't be played.
I thought the problem was because they were AAC tracks but I've converted them to MP3 and the problem remains.
Any thoughts?
Thanks

The problem was other people not having Quicktime. Use Odeo - it works a treat!

Language audio tracks and subtitles with videos

I have a number of movies I have ripped that have both Chinese and English audio tracks. Is there a way to switch between audio tracks for videos, or do I just need to load separate .mp4 files for each?

I do not think there is any option in the ipod to select between the two sound tracks, unless there is a hidden hack. I might be wrong though.
Obviously the only option I am aware of is creating two different files each with the different sound track.

How can I export 6 mono tracks and a one track two channel stereo pair in a quicktime as separate tracks?

I'm using Premiere Pro CC 2014 (8.1) and need to export a 5.1 mix as well as the stereo tracks as 7 separate tracks in a quicktime. If I select 8 channels it automatically creates 8 tracks. Also, if I export the the seventh stereo track as mono track won't it play mono?
Thanks in advance for nay help you can offer.
-Sam

Hi Richard and Kevin.
First of all thanks so much for the response and info. Just to clarify, you're saying I will need 8 tracks, 2 of which will be designated for the stereo pair, right? My concern is that I'm supposed to deliver only 7 tracks. They want the stereo pair as separate channels on one track. I'm wondering if I can create a one track stereo pair and put it on a stereo track, then export only the seven mono tracks (plus an empty track). Would the stereo still work?
Thanks for the link to the previous post. I had actually read it and though it was helpful in explaining how to set up the audio tracks I was still confused about the export.
Much thanks,
Sam

How to disable coupling between audio tracks and environment objects?

Similar Messages

Maybe you are looking for