How to disable DND on Cisco IP Phone 303

Hi there!
I want that none of the user to use DND?
Can i do this from WEB-ADMINISTRATION page of IP PHone?
let me know?
Regards!

Yes, DND activation can be disabled from phone's WWW UI.

Similar Messages

How can I connect a Cisco 7940 phone to a trixbox via SIP

how can I connect a Cisco 7940 phone and CIsco 7970 to a trixbox via SIP

...by configuring the trixbox according to the required configuration and changing your firmware on the phones to SIP{
=============================
Please remember to rate useful posts, by clicking on the stars below.
=============================

How to disable erase from find my phone?

my ipad and mac was stolen. in Find my phone erase was enabled, when ipad was found as everything was erased, could not be located. i don't want that to happen with my (ex) Mac, how to disable erase from find my phone.
Thanks

Do not use Erase. Instead use Lost Device. However, if the items are automatically erased then you cannot locate them nor change the setting.

How to disable power off when the phone is locked with pass code.

Can anyone teach me how to disable power off function when the phone is locked? With this , user is able To trace the iPhone when it goes missing. Besides, users will have enough time to remote wiped.

i also had my phone stolen ... the first thing they did was turn off the phone so i couldnt track them.. you should need to enter your passcode in order to turn off the phone. i dont care if you cant do a hard reset.. i would rather loose the ability to do a hard reset for the added security .. besides without hard reset if it jammed badly i would just wait ontill the battery died.

How to disable webview cache for Windows Phone 8.1 Runtime universal app?

Is it possible to disable cache for the Webview control for a Windows Phone 8.1 runtime universal app? My App seems to be remembering the information it received the first time. My app logs me into a service and when I go back to rerun app in the emulator
(without completing shutting down the emulator) it logs me in automatically rather than giving me the prompt. This behavior is in the NavigationCompleted handler if that helps explain a bit more on where I am hitting this issue.
If I were to shut off the emulator completely and then restart it then I am prompted for the login name and password again. I have gotten over this cache issue, when I was using the HttpClient in other part of my app, by sending the no-cache in the header
as:
client.DefaultRequestHeaders.Add("Cache-Control", "no-cache");
Can I do something similar for the webview control?
thanks
mujno

Hi mujno,
As I know currently there is no programmatically way to clean cache for WebView, see Matt's blog:How to clear the WebView cache
However if you are developing an enterprise app, you should be able to invoke some scripts to clean for you, see this for more information:Brokered
Windows Runtime Components for side-loaded Windows Store apps
--James
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to configure SGE2000P with CISCO 7900 phones and data VLAN

Hello all
I am having problem setting up SGE2000P switches to work with my default data VLAN and additional voice VLAN. I am configuring it to pick IP address for phones from voice VLAN which is working fine but when I connect a PC on phone port it is also picking up an IP from Voice VLAN while default VLAN is data with different scope of IP.
Is there any good discussion or documents out there to help me resolve this issue before I pack these switches and purchase ESW 500 series. I have ESW 500 at another client and they are working fine out of the box but this guy is giving me hard time.
Any suggestions help will be appreciated
Mo

HI Muhammed,
I suggest you contact the Small Business Support Center for some help:
http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html
Regards,
Cindy Toy
Cisco Small Business Community Manager
for Cisco Small Business Products
www.cisco.com/go/smallbizsupport
twitter: CiscoSBsupport

How do YOU fix your Cisco IP Phone stand?

mark9586 wrote:
Stuck a square of Dual-Lock inside the centre section of the stand. Been like this for several months now.Just one side of the dual lock strip - like a wedge? Or are your using both side and the adhesive is holding the stand in place? Thanks!

I think that eventually these darn things just break - at least that's my experience. Does anyone know of a cool quick fix for a stand that won't stand.
Thanks!
This topic first appeared in the Spiceworks Community

AnyConnect for Cisco VPN Phone demo license

I want to test VPN Phone in the ASA5520,but "show ver" find the "AnyConnect for Cisco VPN Phone : Disabled", www.cisco.com/go/license i didn't find register AnyConnect for Cisco VPN Phone demo license, how to apply for the demo license??
Licensed features for this platform:
Maximum Physical Interfaces    : Unlimited
Maximum VLANs                  : 150
Inside Hosts                   : Unlimited
Failover                       : Active/Active
VPN-DES                        : Enabled
VPN-3DES-AES                   : Enabled
Security Contexts              : 2
GTP/GPRS                       : Disabled
SSL VPN Peers                  : 2
Total VPN Peers                : 750
Shared License                 : Disabled
AnyConnect for Mobile          : Disabled
AnyConnect for Cisco VPN Phone : Disabled
AnyConnect Essentials          : Disabled
Advanced Endpoint Assessment   : Disabled
UC Phone Proxy Sessions        : 2
Total UC Proxy Sessions        : 2
Botnet Traffic Filter          : Disabled
This platform has an ASA 5520 VPN Plus license.

Hi there,
Did you try
https://tools.cisco.com/SWIFT/LicensingUI/loadDemoLicensee?FormId=717
Cheers!
Rob
"Why not help one another on the way" - Bob Marley

Illuminate Cisco IP Phones Visual message waiting indicator (VMWI or MWI) ?

How can I programatically illuminate Cisco IP Phones Visual message waiting indicator (VMWI or MWI) ?

Hello Lesser,
So you are wanting to configure MWI for your phones correct?
Check this documentation for example of configuration:
http://www.cisco.com/en/US/products/sw/voicesw/ps2237/products_tech_note09186a0080711ae3.shtml
D_a_v_i_D

Jabber Click to Dial via Cisco IP Phone not enabled - How to ?

After installing Jabber for WIN i would like to know how i can enable "click to dial" for my desktop Cisco IP Phone ? With Webex connect this is working well but not with jabber currently and i can´t find the place to configure...please help...

Hi Tom,
Are you not able to click to dial from contact list? When you hover over a contact, do you see phone icon?
Thanks,
Maqsood

How to connect to itunes after i phone is disabled?\, how to connect to itunes after i phone is disabled?, how to connect to itunes after i phone is disabled?

how to connect to itunes after i phone is disabled?

Follow this article if you have forgotten the passcode for the lock screen:
iOS: Forgotten passcode or device disabled after entering wrong passcode

How can i erase the firmware of cisco 7912 phone ?

how can i erase the firmware of cisco 7912 phone ? the firmware is crashed in this 7912 phone , i want it to download another copy from CUCM8.5 .
the way i did on 7911phone doesn't work on 7912.

https://supportforums.cisco.com/discussion/10797901/reset-factory-default-ip-phone-7912
You can try that procedure but I'm not sure how far that factory reset goes on those phones. I know the 7940/60 series you can blow out everything except the CNU which would do exactly what you are looking for.

HOW TO DISABLE WEB CONSOLE IN A 2950 CISCO SWITCH

HOW TO DISABLE WEB CONSOLE IN A 2950 CISCO CATALYST SWITCH ?

I have disabled HTTP access but enabled HTTPS access on my switches.
switch(config)#no ip http server
(this will disable web or http access)
switch(config)#ip http secure-server
(this will enable https access or no ip http secure-server will disable https access)

Lost my iphone and located on map it using the fing phone app. The second I located it the phone went offline. Whoever has it knows how to disable the find feature. What are my alternatives? Can at

Lost my iphone and located it on the map, using the find a phone app. The second I had the location the phone went offline. Apparently, whoever has it knows how to disable the find a phone feature. Do I have any alternatives? Can AT&T or the police track the phone?

ATT won't unless they are asked to do so by the police and unless a major crime is involved, the police won't request this just for a stolen phone.
If the iPhone is running iOS 6, sounds like you didn't have the passcode lock feature enabled. Nothing prevents someone from powering the iPhone off and the same for removing the SIM card.

How to disable product update on Cisco AnyConnect mobility client

Hallo,
Do you anybody know how to disable/turn off "Checking for product update" during _every_ connecting Cisco Anyconnect Secure Mobility Client (VPN) to remote sites?
I found it may by possible on the ASA side, but I need to disable it on the client (computer). I can see that checking is NOT during connecting to my company site, but when connecting to ANY OTHER site everytime is new version checked. It takes some time ... and I need to switch between VPN often.
Thank you for your help!
Regards, Ondrej

You should be able to do this in the AnyConnect local policy. Just add (or edit, if you already have a local policy file) the following to the local policy file:

<anyconnectlocalpolicy acversion="2.4.140" xmlns="http://schemas.xmlsoap.org/encoding/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemalocation="http://schemas.xmlsoap.org/encoding/ AnyConnectLocalPolicy.xsd">
<BypassDownloader>true</BypassDownloader>
</AnyConnectLocalPolicy>
The local policy file can be found here:
Windows Vista/7/8: C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\AnyConnectLocalPolicy.xml
Linux/Mac: /opt/cisco/anyconnect/AnyConnectLocalPolicy.xml
See the Enabling FIPS and Additional Security in the Local Policy section of the Cisco AnyConnect Secure Mobility Client Administrator Guide, Release 3.1 for more details.

How to disable DND on Cisco IP Phone 303

Similar Messages

Maybe you are looking for