How to: Disable encrypted session balancing

In my company we put a RV042 router to connect two links to internet, but we have problem to enter a bank.
The solution they gave us was to disable encrypted session balancing but I don´t know how to do it
Please I need some help.

It perfectly works.
I made a rule towards the direction of the Bank and now we do not have any problem to access it

Similar Messages

How to disable encryption in oracle forms

Hi,
Is there any parameter or profile option need to be changed to disable encryption in oracle forms?
My requirement is to print all the parameters comes to ListenerServlet.java ,I'm able to do that but in the console i'm getting junk values because of encryption.
Thanks in advance

Insufficient information. Start with Forms version and description of what you are trying to do in greater detail.
The URL is encoded. So what exactly is this junk? Are you seeing encoded things like %20, %7C, etc . along with your actual values? Or, is it completely garbled with unreadable characters? Post a bit of that is you can in a pair of {code} tags like this.{code}<your stuff>{code}.
Regards,

How to disable sessions in CS6?

InDesign Server CS6 added a mechanic of multi-threading jobs via sessions.
Now you can begin session and end session via SOAP web service call.
However, the sessions add a huge overhead for those who want to use multi-instance instead of multi-threading.
A webservice call without a session ID is always ~500ms slower while it creates a session in the background. The session is then appears to be used on a ~5 second sliding timeout allowing subsequent calls to be 500ms faster, however if you wait around 10 seconds, the next call recreates the session and increases render time by ~500ms again.
This is a major issue when rendering takes on average of 1000ms. That's a 50% longer execution time. This is a major problem when trying to offer a speedy web application built on top of IDS.
I tried creating sessions and keeping the IDs in memory, but they expire and result in a whole bunch of SOAP errors.
My question is: Is it possible to disable sessions in IDS CS6 or remove the session expiration time completely?

This is the other discussion: http://forums.adobe.com/message/4518765#4518765
I've tried to lower the quality, and with pure magic, it now works, even when I put highest quality. I don't understand what happened. I asked you how to disable openGL because they told me to in the last discussion. So, thank you for repairing my problem (I think you repaired it, i'll make tests to see). Just in case, could you verify if it's posible to disable openGL like the other person told me?

How to disable Refresh,Reload in browser and user should not allow to multiple browser sessions ?

Dear All,
How to disable Refresh,Reload in browser and end user should not allow to multiple browser sessions in portal.Where we need to configure the settings or any code in masthead or any other component. My server version is 7.4 - SP5 .Please help us.
Thanks for advance,
BR,
Durga Rao.

Dear all,
i am able to logoff the click refresh button on keyboard.I am using this code to log off the user into the portal.
document.onkeydown = function(e)
var key;
if (window.event) key = event.keyCode
else
var unicode = e.keyCode ? e.keyCode : e.charCode
key = unicode
switch (key)
{ //event.keyCode
case 116: //F5 button
LSAPI.sessionPlugin.logoff();
event.returnValue = false;
key = 0; //event.keyCode = 0;
return false;
case 82: //R button
if (event.ctrlKey)
LSAPI.sessionPlugin.logoff();
event.returnValue = false;
key = 0; //event.keyCode = 0;
return false;
case 91: // ctrl + R Button
LSAPI.sessionPlugin.logoff();
event.returnValue= false;
key=0;
return false;
Thanks.
But i am unable to control the multiple windows opening the browser.So any one can tell me the how to block the new window and new tab/duplicate tab option.
BR,
Durga Rao.

How do I disable encrypted page/unencrypted

I would like to know how to disable the above error message that states that "You have requested an encrypted page that contains some unencrypted information." Where is the setting for this for Firefox 5.0.1. I cannot find it. any help would be appreciated.
Thanking you
Victor

Thank you for pointing to the developers' outrageous position. This will at least save us from the frustration of further fiddling with Firefox settings.
FWIW, I'll be filing a bug report (yes, I know it's a "feature") and posting to MacInTouch. Note, too, that this not just a Windows XP issue, as indicated by the System Details, but applies equally to Firefox 7.0.1 running under Mac OS 10.6.8.
If I needed a nanny, I'd have hired one.

How to find active sessions count on a server in weblogic server console

Hi All,
I would like to know how to find active sessions count on a server in weblogic console. I am using weblogic 11g.
Regards,
Sunil.

On the deployment, monitoring tab, you can select web applications. Here the number of current sessions are listed per web application deployed on the domain.
The deployment itself (deployments, application, monitoring, sessions) shows a list of sessions and where it is located. Unfortunately, there is no aggregation (but that is something you can so yourself as well).
When you are using a load balancer in front, the count of sessions on per web application on the domain gives you some clue how many sessions there are present on each server.
That is to say, when load balancer is using round-robin (and does that correct), you can take the total number of sessions divide it by the number of servers.

How to disable swapfile.sys on Windows 8?

It's possible to disable pagefile.sys and hiberfil.sys, however, there does not appear to be information on how to disable
swapfile.sys.
The file swapfile.sys appears to be an additional paging file from Metro and I'd like to know if there is a way to disable it as well.

hiberfile is EASY to get rid of
1) disable fast start up
2) disable hibernation
3) disable hybrid sleep (this trips up most people) as hybrid sleep writes all the data as IF it's going to hibernate but then goes to sleep. This is in case of power failure. Then the system can resume from a hibernated state with no data/session loss
No reason to disable pagefile.sys, it's been proven OVER and OVER that 100% disabling the pagefile system does more harm than good and creates instability in windows - even if you had 64TB of RAM.. many programs actually use and REQUIRE the pagefile to page
out code thats idle.
Even just a minimal 400MB pagefile on the C: drive will keep windows happy. That lets it make a mini dump if needed and allows programs that req a swap file to function normally.
Swapfile.sys, you can not turn off. That's just part of Windows 8. I'm not sure WHY it's there.. I loaded a TON of metro apps, and they hogged 6GB of memory, and they were being swapped to my PAGEFILE. So I'm not understanding what it's there for

Any way to disable encryption of password for database connection pool?

Dear all,
Does anybody know how to disable the password encryption for jdbc connection pool under weblogic 8.1? I need to put clear text password in the config.xml but it seems there's no way to disable the password encryption. Any help is appreciated. Thx in advance.
Paul

paul wee wrote:
Dear all,
Does anybody know how to disable the password encryption for jdbc connection pool under weblogic 8.1? I need to put clear text password in the config.xml but it seems there's no way to disable the password encryption. Any help is appreciated. Thx in advance.
PaulWhen you create the pool, don't give it any password at all, but when you add the
driver properties, add
password=mypassword
as one of the properties.
Joe

How to get transacted session in direct mode with jmsra adapter

Hi,
I use MQ 4.4u1 release with GF in EMBEDDED mode. I configured several connection factories with NoTransaction/LocalTransaction/XATransaction support. In my app I get a connection factory from JNDI tree, create connection/session/producer and send several messages to queue. Everything works fine when I don't use transactions. But, when I want to send messages in one transaction, the connection always provided to me non-transacted session. The session created via
Session session = connection.createSession(true, Session.SESSION_TRANSACTED);
request. I check the session transacted state and acknowledge mode right after i get it:
log.fine("Session: " + session + "; transacted: " + session.getTransacted() + "; ackMode: " + session.getAcknowledgeMode());
The log shows me that the session is not transacted and ackMode is 0 (DUPS_OK_ACKNOWLEDGE). If I try to commit the session after messages were sent I get the correct exception:
javax.jms.IllegalStateException: MQJMSRA_DS4001: commit():Illegal for a non-transacted Session:sessionId=3361979872663370240
Does anyone know how to get transactional session in direct mode?
Thanks, Denis.

I mentioned LOCAL because I misread your post and thought you were suggesting that LOCAL mode behaved differently.
If you want to send messages in a transaction from within a Servlet then I think you're expected to use a UserTransaction: Here's an example that worked for me:
        Connection connection = outboundConnectionFactory.createConnection();
        Session session = connection.createSession(true, Session.SESSION_TRANSACTED);
        userTransaction.begin();
        MessageProducer producer = session.createProducer(outboundQueue);
        int numberOfMessages = 10;
        for (int i = 0; i<numberOfMessages; i++) {
            Message message = session.createTextMessage("Hello world");
            producer.send(message);
        userTransaction.commit();
        connection.close();I obtained the UserTransaction with this resource declaration:
    @Resource(name = "java:comp/UserTransaction")
    private UserTransaction userTransaction;The EJB spec explicitly states that local transactions aren't supported in EJBs; I haven't found such an explicit statement for Servlets but suspect that JMSRA is taking the same approach.
As for imq.jmsra.direct.disableCM property - this appears to disable connection pooling and from your post changes other behaviour as well. How did you find out about it (other than by examining the code)? As far as I can see this is not a documented feature and is not necessarily tested or supported.

How to: disable buttons in standard forms

Hi all,
does anybody know how to disable session date button from standard forms?
I cannot find in forms (through Form Builder) the right data block / canvas where this button is.
Thanks all.
Jacopo

I'm not aware of any "session date button". A button on a form can be disabled using the set_item_property.
Use the layout editor and double-click the button. It will tell you what button it is. The button will also be highlighted in the Object Navigator window.
Message was edited by:
Mark Roberts

Problems disabling restart session persistence in Tomcat

I'm running Tomcat 5.5.17. I've been working on an application for quite some time when the tomcat logs suddenly started to fill up with the following errors each time I restart Tomcat:
2006-09-29 21:15:10,539 | WARN | StandardSession.java | writeObject() | 1468 | Cannot serialize session attribute publicPictures for session 9184A48FEFC99FAA3573A4DE1F75CCD5
I've searched the web, and found out that the reason for this is that Tomcats "Restart Session Persistence" is turned on. So how do I turn that off?
According to a few sites in the web there should be a file called application.xml, in which I can put the line <Manager pathname=""/> to disable the Session Persistence manager. The problem is that on my Tomcat installation there's no such file.
So I tried to create the file $CATALINA_HOME/conf/application.xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE application PUBLIC '-//Sun Microsystems, Inc.//DTD J2EE Application 1.3//EN'
'http://java.sun.com/dtd/application_1_3.dtd'>
<application>
<Manager pathname=""/>
</application>But this had no effect at all. So can someone please explain to me how I can disable the Session Persistence manager?

I had a similar problem in that during restarts sometimes I would get messages about null pointer exceptions which seemed to be related to attempted session persistence. I never paid a lot of attention but eventually decided to do something about it, i.e disable session persistence, since the errors seemed to slowdown restarts.
Based on this:
http://tomcat.apache.org/tomcat-5.5-doc/config/manager.html
I added a Manager element to my main Context element, using the standard manager class and setting the pathname attribute to an empty string:
<Context path="/" debug="1" reloadable="true" crossContext="true">
<Manager class="org.apache.catalina.session.StandardManager" pathname="" />
</Context>
Since the errors I was getting were sporadic anyway I cannot definitively say this fixed it but I have not seen any errors since making the change and shutdowns seem to go faster now.

How to disable autoloading of previously opened page when i open firefox ?

When i open firefox, the last opened website automatically load
instead of default firefox homepage. I do not want this due to privacy issue.
This did not happen in previous versions of Firefox.
How to disable this ?

You can also check the startup setting:
*Tools > Options > General > Startup: "When Firefox Starts": "Show my home page" "Show a blank page"
Firefox 4 saves the previous session automatically, so there is no longer need for the dialog asking if you want to save the current session.
You can use "Firefox > History > Restore Previous Session" to get the previous session at any time.

How to disable easy print in server 2012 r2

how to disable easy print in server 2012 r2

Hi,
To disable RD Easy Print on server 2012 r2, we need to disable the policy setting “Use Remote Desktop Easy Print printer driver first” under following path.
Computer Configuration\Administrative templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Printer Redirection
Please check below article for checking RD Easy print.
http://blogs.msdn.com/b/rds/archive/2009/09/28/using-remote-desktop-easy-print-in-windows-7-and-windows-server-2008-r2.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How to disable end user personalisation for all webdynpro application.

Dear Experts,
I have a requirement where I have to disable the end user personalization of each and every
webdynpro application in my server.
I know how to disable the personalization of a single application or a single component, but my requirement is to disable the personalization of all applications.
Request you to please suggest.
Warm Regards,
Upendra Agrawal

Hi,
As per SAP help,
Customizing: User-Independent, Client-Wide Modifications
While a single user u2013 during a personalization process u2013 can manipulate his or her own settings, an administrator has the option of executing Customizing settings for all users. Technically, this procedure is not different from personalization; both take place at runtime of an application. The difference lies in the range of the settings. In addition, for these global settings an application must run in a special administration session. This is always automatically the case if an application was started in the portal in the preview session. Independently of the portal, you can start an application in the following manner from within the workbench in administration mode:
Double-click the name of the application in the object list.
In the Web Dynpro Applications menu in the upper, left-hand corner of the Workbench window, choose Test Execute in Admin Mode .
The configuration mode is passed to an application as the sap-config-mode=X URL parameter.
Note
All the adjustments made by the administrator in admin mode are stored as client-specific. Presently no option is available for structuring smaller user groups on an administrative basis. Since cross-client adjustment applies to the respective configuration, the structuring of smaller groups can be implemented currently through the maintenance of different configurations.
End of the note.
You start personalization by calling up the context menu for the respective UI element in your application. In the corresponding context menu for an administrator (that is, with URL parameter sap-config-mode=X), in addition to the standard settings administrators have the option within a UI element container to sort either single lines (Grid, Matrix aund RowLayout) or single elements (FlowLayout).
Note
Administrators require special authorization for client-wide modifications. This can be a developer authorization or the special authorization S_WDR_P13N. You cannot create configurations at design time with this authorization, but you can make modifications at runtime.
End of the note.
These modifications are valid for all users but take place in the current client only.
Thanks,
Chandra

How webcenter maintain the session .

Hi All,
Can anybody explain me how webcenter maintain its session .
As of my understanding if we perform any action on webcenter component it goes through some service call .
Once this service call is madle idle icon keep moving that says your session is refreshed now .
Please can u let me know which function and how it is called to idle timer to refresh (revolve).
Its very important for me since i want to call this function from my template to refresh the session since i am not using standard portlet connection through wsrp .
With Regards ,
Arun.

Well, you're not wrong, but things could be clarified...
Check out + session invalidation... I presume you mean you explicitly invalidate it, yes? The session will timeout eventually anyway (unless you make it have no timeout).
Anyway, to you actual question. The container manages them, to an extent. It handles sessions automatically for you thru session cookies with the session ID. But if the user has cookies disabled, then that'll muck things up. Generally, it's good practice to always use URL rewriting on your links to make sure that's not a problem.

How to: Disable encrypted session balancing

Similar Messages

Maybe you are looking for