How to disable ' End Employment' functionality for a responsibility

Dear Experts,
I want to disable or unable 'End Employment' functionality present in "Enter and Maintain>Others>End Employment" for a specific responsibility of a user.
What i want is that when that particular user clicks on that functionality, nothing should happen or a message regarding permission from system administrator should appear.
I appreciate your prompt response
Regards

You can check this article (Task Flow). In same way you apply for your requirement.
How Does One Hide The Salary History Option That Is Available On The Assignment Form From US HR Manager Responsibility [ID 1068012.1].
Thanks, Avaneesh

Similar Messages

  • How to disable end user personalisation for all webdynpro application.

    Dear Experts,
    I have a requirement where I have to disable the end user personalization of each and every
    webdynpro application in my server.
    I know how to disable the personalization of a single application or a single component, but my requirement is to disable the personalization of all applications.
    Request you to please suggest.
    Warm Regards,
    Upendra Agrawal

    Hi,
    As per SAP help,
    Customizing: User-Independent, Client-Wide Modifications
    While a single user u2013 during a personalization process u2013 can manipulate his or her own settings, an administrator has the option of executing Customizing settings for all users. Technically, this procedure is not different from personalization; both take place at runtime of an application. The difference lies in the range of the settings. In addition, for these global settings an application must run in a special administration session. This is always automatically the case if an application was started in the portal in the preview session. Independently of the portal, you can start an application in the following manner from within the workbench in administration mode:
    Double-click the name of the application in the object list.
    In the Web Dynpro Applications menu in the upper, left-hand corner of the Workbench window, choose  Test  Execute in Admin Mode .
    The configuration mode is passed to an application as the sap-config-mode=X URL parameter.
    Note
    All the adjustments made by the administrator in admin mode are stored as client-specific. Presently no option is available for structuring smaller user groups on an administrative basis. Since cross-client adjustment applies to the respective configuration, the structuring of smaller groups can be implemented currently through the maintenance of different configurations.
    End of the note.
    You start personalization by calling up the context menu for the respective UI element in your application. In the corresponding context menu for an administrator (that is, with URL parameter sap-config-mode=X), in addition to the standard settings administrators have the option within a UI element container to sort either single lines (Grid, Matrix aund RowLayout) or single elements (FlowLayout).
    Note
    Administrators require special authorization for client-wide modifications. This can be a developer authorization or the special authorization S_WDR_P13N. You cannot create configurations at design time with this authorization, but you can make modifications at runtime.
    End of the note.
    These modifications are valid for all users but take place in the current client only.
    Thanks,
    Chandra

  • How to disable the purchase function?

    Anyone know how to disable the purchase function from the ipad2? How to disable and empty the payment credit card inform? If not, is it secure?

    None for payment
    After establishing the Credit Card account (i.e. after you have made purchases), you can remove the credit card information by editing your payment info, choosing "None".

  • How to Use the language function for assignment and validation

    Hi All,
    If anyone can explain me in details with example ,how to use the language function for assignments and validations?
    Thanks
    Arnab

    Hi Arnab,
    The expression is checked only for the current MDM session.
    If u login with the ABC language it will always show the ABC language no matter how many times u execute it.
    Try connecting to the DM with the XYZ language.
    It should go to the if part rather than else.
    Hope it helps.
    Thanks,
    Minaz

  • How to use Spell-check functionality for textbox (like Orkut, gtalk)

    How to use Spell-check functionality for tex Hello Friends,
    I am working on a JSP application. I wanted to add Spell check for text box like we have here, when we post a message. It automatically shows red line under the word, when ever spelling is wrong. Please tell me how I can do this. If possible, the code too.
    Thanks.

    I believe the spell checking you see here, or on any other site, is the spell checking built into Firefox. At least that's what I see. Are you using Firefox?

  • How to disable the Directory listing for the whole server or a particular a

    Please let me know how to disable the Directory listing for the whole server or a particular application.
    Thank You

    I want to disable the tab focusing( tab index) for a JTextField objectsLook through the API and find methods with the word "focus" in the method name.
    Also can u tell me about how to change the tab index orders for JTextFields."How to Use the Focus Sub System":
    http://java.sun.com/docs/books/tutorial/uiswing/misc/focus.html

  • How can i debug specail function for VA01

    How can i debug specail function for VA01,For example, I establish one and export type ZA01, the procedure code is ZRVADOR01, how do I debug this procedure?
      thank you!

    First you keep a break point in the program
    Step#1.
    RSNAST00 (on the below mentioned code).
    PERFORM (TNAPR-RONAM) IN PROGRAM (TNAPR-PGNAM) USING RETURNCODE
                                                             US_SCREEN
                                                             IF FOUND.
    and now in VA01 , just start Debugging after you choose the Output type using /H at the command.
    now you will see the Debugging , now choose the menu Settings->Update Debugging
    this will activate the Update Debugging.
    Now Press F8. now another window will open , in that you it will stop near the break point in the step 1 .
    It will take you to the corresponding program/
    Now you Debug and check what ever you want

  • How to disable the vibration feature for the Alarm?

    How to disable the vibration feature for the Alarm?

    Hi guys , because we have no answer to our issue how to take off the vibration when alarm is on , and our other profiles like ringtones, messages , reminders and so on we need to keep them on vibrate mode , the best solution is to install a free application from store called "alarmed " ; I did put it down on my phone and now i can use the alarm clock without any vibration at all ! That's the answer to our issue , before Apple is going to find a solution !
    Personally , I don't think is going to be fix it soon , as long as the apple script made for pop ups is general one !
    Good luck everyone

  • How to disable  or unable to viewa particular function for a responsibility

    Hi
    I am trying to do personalization and i want to disable the view or updates of salary screen from people screen to certian responsibility.Especially element entry values should not be modified or viewed for specific responsibility.How can we do that with personalisation.Its standard form and dont want to do the customization of people screen
    rgds
    raj

    You should achieve this without personalisation. Use taskflows_ so that the people/assignment form for the people with restricted views does not contain a button to link to the salary or element entry screens.
    Also, you can set the system profile HR:User Type to HR Only to prevent the user accessing payroll related data.
    I suggest the first option is the best in this case.
    I hope this solves the problem!
    Regards
    Tim

  • How to disable line selection functionality in ALV.

    Hallo guys,
    I need to disable the ALV functionality to select one(or more) lines.
    How to hide this push button on the right side?
    Thanks.

    hi
    good
    check this
    *& Report  ZDEMO_ALVGRID_SELROW                                        *
    *& Example of a simple ALV Grid Report                                 *
    *& The basic ALV grid, Enhanced to display capture each row a user has *
    *& selected                                                            *
    REPORT  zdemo_alvgrid_selrow                 .
    TABLES:     ekko.
    type-pools: slis.                                 "ALV Declarations
    *Data Declaration
    TYPES: BEGIN OF t_ekko,
      SEl,                         "stores which row user has selected
      ebeln TYPE ekpo-ebeln,
      ebelp TYPE ekpo-ebelp,
      statu TYPE ekpo-statu,
      aedat TYPE ekpo-aedat,
      matnr TYPE ekpo-matnr,
      menge TYPE ekpo-menge,
      meins TYPE ekpo-meins,
      netpr TYPE ekpo-netpr,
      peinh TYPE ekpo-peinh,
    END OF t_ekko.
    DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
          wa_ekko TYPE t_ekko.
    *ALV data declarations
    data: fieldcatalog type slis_t_fieldcat_alv with header line,
          gd_tab_group type slis_t_sp_group_alv,
          gd_layout    type slis_layout_alv,
          gd_repid     like sy-repid.
    *Start-of-selection.
    START-OF-SELECTION.
    perform data_retrieval.
    perform build_fieldcatalog.
    perform build_layout.
    perform display_alv_report.
    *&      Form  BUILD_FIELDCATALOG
          Build Fieldcatalog for ALV Report
    form build_fieldcatalog.
    There are a number of ways to create a fieldcat.
    For the purpose of this example i will build the fieldcatalog manualy
    by populating the internal table fields individually and then
    appending the rows. This method can be the most time consuming but can
    also allow you  more control of the final product.
    Beware though, you need to ensure that all fields required are
    populated. When using some of functionality available via ALV, such as
    total. You may need to provide more information than if you were
    simply displaying the result
                  I.e. Field type may be required in-order for
                       the 'TOTAL' function to work.
      fieldcatalog-fieldname   = 'EBELN'.
      fieldcatalog-seltext_m   = 'Purchase Order'.
      fieldcatalog-col_pos     = 0.
      fieldcatalog-outputlen   = 10.
      fieldcatalog-emphasize   = 'X'.
      fieldcatalog-key         = 'X'.
    fieldcatalog-do_sum      = 'X'.
    fieldcatalog-no_zero     = 'X'.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'EBELP'.
      fieldcatalog-seltext_m   = 'PO Item'.
      fieldcatalog-col_pos     = 1.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'STATU'.
      fieldcatalog-seltext_m   = 'Status'.
      fieldcatalog-col_pos     = 2.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'AEDAT'.
      fieldcatalog-seltext_m   = 'Item change date'.
      fieldcatalog-col_pos     = 3.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'MATNR'.
      fieldcatalog-seltext_m   = 'Material Number'.
      fieldcatalog-col_pos     = 4.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'MENGE'.
      fieldcatalog-seltext_m   = 'PO quantity'.
      fieldcatalog-col_pos     = 5.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'MEINS'.
      fieldcatalog-seltext_m   = 'Order Unit'.
      fieldcatalog-col_pos     = 6.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'NETPR'.
      fieldcatalog-seltext_m   = 'Net Price'.
      fieldcatalog-col_pos     = 7.
      fieldcatalog-outputlen   = 15.
      fieldcatalog-do_sum      = 'X'.        "Display column total
      fieldcatalog-datatype     = 'CURR'.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'PEINH'.
      fieldcatalog-seltext_m   = 'Price Unit'.
      fieldcatalog-col_pos     = 8.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
    endform.                    " BUILD_FIELDCATALOG
    *&      Form  BUILD_LAYOUT
          Build layout for ALV grid report
    form build_layout.
      gd_layout-box_fieldname     = 'SEL'.
                                     "set field name to store row selection
      gd_layout-edit              = 'X'. "makes whole ALV table editable
      gd_layout-zebra             = 'X'.
    endform.                    " BUILD_LAYOUT
    *&      Form  DISPLAY_ALV_REPORT
          Display report using ALV grid
    form display_alv_report.
      gd_repid = sy-repid.
      call function 'REUSE_ALV_GRID_DISPLAY'
           exporting
                i_callback_program      = gd_repid
               i_callback_top_of_page   = 'TOP-OF-PAGE'  "see FORM
                i_callback_user_command = 'USER_COMMAND'
               i_grid_title           = outtext
                is_layout               = gd_layout
                it_fieldcat             = fieldcatalog[]
               it_special_groups       = gd_tabgroup
               IT_EVENTS                = GT_XEVENTS
                i_save                  = 'X'
               is_variant              = z_template
           tables
                t_outtab                = it_ekko
           exceptions
                program_error           = 1
                others                  = 2.
      if sy-subrc  0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      endif.
    endform.                    " DISPLAY_ALV_REPORT
    *&      Form  DATA_RETRIEVAL
          Retrieve data form EKPO table and populate itab it_ekko
    form data_retrieval.
    select ebeln ebelp statu aedat matnr menge meins netpr peinh
    up to 10 rows
      from ekpo
      into corresponding fields of table it_ekko.
    endform.                    " DATA_RETRIEVAL
          FORM USER_COMMAND                                          *
          --> R_UCOMM                                                *
          --> RS_SELFIELD                                            *
    FORM user_command USING r_ucomm LIKE sy-ucomm
                      rs_selfield TYPE slis_selfield.
    Check function code
      CASE r_ucomm.
        WHEN '&IC1'.
      Check field clicked on within ALVgrid report
        IF rs_selfield-fieldname = 'EBELN'.
        Read data table, using index of row user clicked on
          READ TABLE it_ekko INTO wa_ekko INDEX rs_selfield-tabindex.
        Set parameter ID for transaction screen field
          SET PARAMETER ID 'BES' FIELD wa_ekko-ebeln.
        Sxecute transaction ME23N, and skip initial data entry screen
          CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.
        ENDIF.
        WHEN '&DATA_SAVE'.  "user presses SAVE
        loop at it_ekko into wa_ekko.
          if wa_ekko-sel EQ 'X'.
          Process records that have been selected
          endif.
        endloop.
      ENDCASE.
    ENDFORM.
    thanks
    mrutyun^

  • How to Disable battery charging Function?

    Hi;
    I have a question about charging funtion of my "HP Compaq Business Notebook, 6720s":
    How can I disable "battery charging" function in windows 7? Is there any "advanced setting change" or "software"  that while battery is in its slot, stop my notebook from charging its battery?
    Thanks

    After some days trying many methods, yet I haven't find a solution to my problem. Then I ask is there  any one
    knows which software should I download for HP Compaq Power Management (similar to the software that Huffer
    mentioned, but that was for Lenovo) or which registery or BIOS change should I do , so that I can manually disable
    charging function of laptop, or at least put a starting level that up to that level, laptop won't start
    autolatically to charge battery, because in this manner once that my Battery reaches to below 100%, instantly begin
    to be charged & it would decrease its life time. Please consider that because of my power cable is to some damaged, sometimes it suddenly disrubt & cause my laptop abruptly shut down, then necessarily the battery would always be connected tob prevent this suddent effect.
    If any one could help me, I would appreciate him a lot.
    Regards

  • MSI installation, how to disable the online functions (like Cloud and login)?

    How can I disable the online functions which need a login with the adobe id? I want to do this while I install the Adobe Reader DC with the MSI installer.

    Hi Yannic,
    I can understand your concern, however Document Cloud is a core part of Adobe Acrobat Reader DC and Adobe Acrobat DC so it cannot be disabled. If you don't want to use this feature then you don't need to sign in.
    If you really feel that this does not suites your requirement then you can uninstall it & re-install Adobe Reader 11 Adobe Acrobat Reader DC Install for all versions.
    Let me know if you have any further queries.
    Regards,
    Aadesh

  • How to disable drive letter assignment for Windows 7 64 bit

    Hi everybody,
    Currently, I have a problem that need your help for my company
    I received a new request from my boss, that is disable USB removeable storage on Windows 7 64 bit
    I found out and apply some solutions from internet but it cannot be solved
    In some solutions, I pay attention to a good one: Disable drive letter assignment for Windows 7 64 bit
    I think it may solve my problem. But how to do it??? I need your help from all of you
    Thanks for your support!!!!

    Hi,
    Let's verify your issue. Did you want to disable USB storage device?
    If yes, try this:
    1. If you have not ever already done so, you must connect a USB storage device
    to the computer now, and wait until Windows installs it and displays it in the Computer window with an assigned drive letter, then
    disconnect it.
    2. Press the Windows + R keys to open the Run dialog, type
    regedit, and press Enter.
    3. If prompted by UAC, then click on Yes.
    4. In Registry Editor, navigate to the location below:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\USBSTOR
    5. In the right pane of USBSTOR, double click on Start to modify it.
    6. Type in 4, click on OK.
    7. Close Registry Editor windows.
    Karen Hu
    TechNet Community Support

  • How to disable Save & Print functionality in PDF form?

    Hi,
    This is the requrement, client need to disable Save & Print functionality in PDF form. (They not allow employee save & print the hrforms payslip)
    May I know how to do it. Thank you.
    What is the parameter value in structure SFPOUTPUTPARAMS  that I need to set in order to  disable Save & Print functionality ?
    call function 'FP_JOB_OPEN'
        changing
          ie_outputparams = SFPOUTPUTPARAMS
        exceptions
          others          = 1.

    Hi Nayan,
    I'm the person who did the WD as well, using IFrame to contain the PDF binary. WD site didn't contro the binary source.
    I pre-define the 'FP_JOB_OPEN' before calling the PDF generation.
    Optional: Set output parameters
      gs_outputparams-nodialog  = ''.
      gs_outputparams-preview   = ''.
      gs_outputparams-getpdf    = 'X'.
      gs_outputparams-nopreview = 'X'.
      gs_outputparams-noprint   = 'X'.
      gs_outputparams-noarchive = 'X'.
      gs_outputparams-nopributt = 'X'.
      gs_outputparams-arcmode = '1'.
      gs_outputparams-noarchive = 'X'.
    Open print job
      CALL FUNCTION 'FP_JOB_OPEN'
        CHANGING
          ie_outputparams = gs_outputparams
        EXCEPTIONS
          OTHERS          = 1.
    Regards,
    Eric

  • How to setup the fax function for a AOI device

    I read in several post on this forum that people get full print/scan/FAX functionality for the supported printers.
    In my case, I have a HP Photosmart C7280, which is full supported using the C7200 series drivers, including a FAX driver.
    Now, I add a printer in the 'Print & Fax' panel, and right away my printer shows up for bonjour. It finds automatically the correct driver, and works like a charm for printing and scanning, but... No Faxing whatsoever. Also no 'second' printer shows up, with 'kind' HP Fax, as several posts sugguest. Not after a few seconds, not after minutes. Using the 'Fax Devices' tab also doesn't show me any HP Fax device.
    So basically my question is: How do I setup the fax functionality in SL with my printer?
    Yes, it is connected over network, and the fax functions did work perfect over network with the 10.5 drivers from HP. Am I running into SL limitations? Does SL fax-drivers still support the (not optional, but default builtin) network functions of the C7280? Or... Am I just a noob that just can't find out how the setup a Fax device the obvious way
    Thanks
    - C

    Hello mscheidell,
    Yes, I was aware of the 'two' 7200 series drivers, but thank you for checking with me.
    Okay, now how did you 'add' your fax device for your printer? Did it show up a second version of your printer in the 'Add printer' box, with type FAX? Or did you just add the same 'found' printer again, but the second time with the FAX printer drivers (manual selected)?
    Right now, I only get one entry when I try to add my printer into SL: It find the Photosmart C7200 series with 'kind' Bonjour. That's the only thing that will show up in my 'found' printers, even after waiting a few minutes. People in these discussions are telling me there should show up a second 'found' printer with 'Kind' HP-Fax, but that just won't happen for me.
    I also tried to add the same found 'bonjour' printer again, and select manually the 'Photosmart C7200 series - fax' driver. SL tells me then there is already a print queue for that printer, but I tell SL to add this printer anyway. Then I have this C7200 series Fax device in my printing list. Using this driver seems to work fine, I can fill in fax recipients, but hitting the print button, caused the C7200 to spit out it's complete papertray, printed with bogus ascii signs only on the first lines of the page, instead of really faxing that document. So I concluded that this was not the right way to get the fax working....
    Thanks for all the help again.
    - C

Maybe you are looking for