How to disable enterprise manager's security

Hi
I installed 11.2.0.1 Enterprise Edition on RHEL 5.6.2 64-bit. I cannot start the EM because of security issues. Repository and EMD are using https. How can I disable all security mechanisms? This will not be a production database!
Thanks in advance!

user10962462 wrote:
$ emctl secure status dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
Checking the security status of the DBCONSOLE... Done.
DBCONSOLE is secure at HTTPS Port 1158.
Checking the security status of the Agent... Done.
Agent is secure at HTTPS Port 3938.So, what I need is the following result: instead of DBCONSOLE is secure and Agent is secure i want to see DBCONSOLE is not secure and Agent is not secure.
Does anyone know how this can be done?http://download.oracle.com/docs/cd/B19306_01/em.102/b40002/security2.htm#i1025189

Similar Messages

How to configure Enterprise Manager in Active Data Guard?

Hi,
I have installed oracle 11g r2 rac with asm in two nodes. OS is hp-Unix.
I have installed oracle11g Active Data Guard using Single alone Database.
Both RAc and Active Data Guard works fine.
I have not configure Data Guard Broker.
Question: How to configure Enterprise Manager in Active Data Guard?
Thanks
Solaiman

http://www.gokhanatil.com/2012/04/manage-your-existing-data-guards-with.html

How to configure Enterprise Manager both node (2 node) RAC?

Hi,
I have installed oracle 11g r2 rac with asm in two nodes. OS is hp-Unix.
I have installed oracle11g Active Data Guard using Single alone Database.
Both RAc and Active Data Guard works fine.
I have not configure Data Guard Broker.
I have configure Enterprise Manager during RAC database installation.
When I start Enterprise Manager from node1 its address to node1
but when I start Enterprise Manager from node2 it also addressed to node1.
When both node is up and running, I can connect from Enterprise Manager.
When node2 is down but node1 is up then also I can connect from Enterprise Manager
but when node1 is down and node2 is up I can't connect from Enterprise Manager.
Question: How to configure Enterprise Manager so that I can connect through it whenever any single node is running?
Thanks
Solaiman

http://www.gokhanatil.com/2012/04/manage-your-existing-data-guards-with.html

How to start Enterprise Manager Server on Linux

I install successful oracle 9i on redhat 7.2 Linux ,but I don't know how to start Enterprise Manager Server on Linux ,please help me ,thanks!

oemctrl start oms
oemctrl status oms sysman/oem_temp
oemctrl stop oms sysman/oem_temp

How to start Enterprise manager 10g Linux?

To,
Can some one please tell me
How to start Enterprise manager 10g on Linux RHEL 4.7
Thanks,

Hi
While runniing $ sh emctl start dbconsole getting error of Enveromment variable ORACLE_SID not Defined
Can you pls tell me Where do i fine env file to source the ENV file Enterprise manager 10g
Also do i need to run the *$ sh emctl start dbconsole* command from GUI of Linux.
Actualy follwoing is my exact stetup
I have installed Oracle EBS 11.5.10.2 on Linux EHEL 4.7
On the same Linux Box ( Where Oracle EBS 11.5.10.2 is installed ) Installed Oracle Application and Infra. server and Discoverer
Please guide me on the same.
Thanks,

Fusion Middlewar Enterprise Manager & RDBMS Security Store

Hello,
when using a weblogic soa domain configured with the realm to use RDBMS Security Store or adding a new SQLAuthProvider into the realm, the Fusion Middleware Enterprise manager does not show status of servers and deployed components anymore. Everything is red and the status column shows a clock.
It seems that Enterprise Manager Application does not work (cannot retrieve status of servers and deployed components) when using a SQL Auth provider or RDBMS Security store.
Does anyone have the same problem??
Database used: oracle 11g. SOA Suite 11.1.1.6
Thanks.
Alexander
Edited by: user13290225 on Nov 1, 2012 7:55 AM
Edited by: user13290225 on Nov 1, 2012 7:55 AM

I have cleared the tmp Folder under the Admin Server Directory and restarted the server..but still facing the same error..How to resolve the error *"oracle.adf.share.security.authentication.AuthenticationServlet"*

Enterprise Manager in secure environment with no internet access

I have Oracle 11g installed in a secure isolated environment, which means there is limited access to the servers, and definitely no internet access from that environment.
I am looking to configure Enterprise Manager / Database control.
I can successfully start up the application server on my database server, and connect to this from a web browser within my secure environment.
However when I try to display the Performance tab, nothing is displayed.
I understand this screen uses an ActivX component.
Is the use of the ActivX component going to have problems because my servers have no direct internet access, or should this not make any difference?
Thanks
Paul Graves

No this is not going to make any difference.
You don't need any internet connection at all for working with OEM GC.
Maybe, if you want to configure the Patch Setup to receive Patch Adviories from My Oracle Support, but even then you can do without a connection from you server(s) to the internet.
Asuming that you are using OEM GC 10.2.0.5, you will also be needing the installation of Flash Player and Adobe SVG Plugin, both to be installed in your browser.
Kind regards
Rob
For more information on working with OEM GC, you might want to check http://oemgc.wordpress.com

How to disable checking for sites security certificates

I work in a company which manipulates its server in a way to make all unwanted sites look like not having a valid certificate so when I try to open them like gmail site I get a message that this site doesnt have a valid certificate and firefox - or any other browser- dont open the site. The question is: how to disable this feature in firefox to stop looking for sites certificates or doesnt care about them?

Exporting a root certificate in another browser would only be helpful if it did work in that browser.
If it happens in other browsers as well then it would be of any help.
I'm not seeing the button to add an exception as that would allow to inspect the certificate in the Certificate Manager.
Is that specific page opened in an (i)frame?
If "I Understand the Risks" is missing then this page may be opened in an (i)frame and in that case try the right-click context menu and use "This Frame: Open Frame in New Tab".

How to recreate enterprise manager with database vault

I'm testing the Oracle database Vault option at database version 11.1.0.7 but there are some thing that does not work correct in the test. One of them is that I do not be able to recreate the enterprise manager repository. After probe several ways with database option enabled I decided to disable it. With the database vault option disabled I recreated the emanager ok but after enabled the database vault option again the database vault administrator does not browse for me:
The firefox notice me an error with resource /dva.
I hope you can help me.

when you have vault on do you get errors in the realm audit reports ?
or are you trying to create an oem repository in a vault enabled database ?

How to configure Enterprise Manager Database Control (EMDC) to make it work on 2 servers working (primary and standby) under DG rules

Hello everybody i use Oracle Database EE 11.2.0.4 with DG.
In those cases i need to get Enterprise Manager Database Control running against DB with no RAC and no DG i perform the following steps:
I Logon SQLPLUS as user SYS or SYSTEM, and drop the sysman account and management objects:
DECLARE
CURSOR c1 IS
SELECT owner, synonym_name name
FROM dba_synonyms
WHERE table_owner = 'SYSMAN';
BEGIN
FOR r1 IN c1 LOOP
IF r1.owner = 'PUBLIC' THEN
EXECUTE IMMEDIATE 'DROP PUBLIC SYNONYM '||r1.name;
ELSE
EXECUTE IMMEDIATE 'DROP SYNONYM '||r1.owner||'.'||r1.name;
END IF;
END LOOP;
END;
DROP USER mgmt_view CASCADE;
DROP ROLE mgmt_user;
DROP USER sysman CASCADE;
After that i run
emca -config dbcontrol db -repos recreate
But what should i do in cases i have 2 servers working (primary and standby) under DG rules?

Hi ,
It is not possible to monitor/administer a Logical or Physical Standby database, i.e Data Guard, using Enterprise Manager Database Control. This is primarily due to the fact that Database Control is designed to monitor 1 database and a Data Guard environment, by definition, includes more than 1 database.
If you attempt to run emca against a standby Database, you will get an error like (i.e. ORA-01219: database not open).
Database Control, can, of course, be used to monitor the current Primary database (with no ability to administer or monitor Data Guard related functionality). In such a case, when failover occurs Database Control must be reconfigured to run on the new Primary database using the commands detailed in Note 278100.1 How To Drop, Create And Recreate DB Control In A 10g Database, section C. Recreate/ReConfig DB Control, Option 2. Recreate the DB Control Configuration Files and Repository.
Enterprise Manager Grid Control or Cloud Control provides the functionality for viewing, monitoring, and administering primary and standby databases in a Data Guard configuration.
Reference: Is it Possible to Configure Database Control for a Logical or Physical Standby Database? (Doc ID 315116.1)
You can use EM 12c cloud control to monitor and manager Standby DB effectively
Ref to below link for details
Set Up and Manage Oracle Data Guard using Oracle Enterprise Manager Cloud Control 12c
Regards,
Rahul

How to start Enterprise manager ?

how to know if i have installed Enterprise manager or not.
what command to start Enterprise manager ?

You can start OEM as:
go to ORACLE_HOME/bin directory.
then type ./oemapp with any 1 of its 6 options.
You can type just ./oemapp and it will show the available options like instance etc.
Vinayak Thatte

How to install Enterprise Manager to JDeveloper integrated Weblogic domain

I have installed JDeveloper 11g and as you know it also installs an embedded Weblogic and creates a Weblogic domain. This domain by default has the console application but does not have the em application. How can I add em to my integrated Weblogic?

Sturla,
I can give you the quick steps for installing EM into the WLS container integrated with JDev:
1). Download from OTN two pieces of software from the Fusion Middleware 11g (use the "For Deployment" software, click "See All"): the Application Development Runtime, and (under Additional Required Software) the Repository Creation Utility (RCU).
2). Unzip the RCU and run bin/rcu.bat or bin/rcu (windows/*nix). Create the MDS repository in an Oracle DB using this utility.
3). Install the application development runtime into the same home you installed JDeveloper.
4). Run the configuration wizard - on Windows its in the start menu / Oracle Fusion Middleware 11.1.1.1.0 / Weblogic Server 11gR1 / Tools. Find it yourself on *nix ;)
5). Choose to extend a domain
6). Pick your DefaultDomain directory for the integrated WLS
7). Tick the checkbox to add enterprise manager
8). Supply the database connection information for the DB in which you created the repository in step 2.
Ta-da!
The EM will be accessible via http://hostname:7001/em, username/password=weblogic/weblogic1. I will caution you about generically installing into the integrated domain - it makes your WLS take noticeably longer to start up...
Best,
John

How to install Enterprise manager

Hi all,
I unable to access to enterprise manager console URL.I was thinking the solution of this problem is EM unstalled and then reinstalled.So i have unstalled Enterprise manager product using
Oracle Universal installer. i don't know how to install the EM in my database. Please tell me how to install the ORACLE?
where to download Oracle EM?
Thanks,
michael.

Hi there,
for downloads of Enterprise manager, use the following link:
http://www.oracle.com/technology/software/products/oem/index.html
For instructions on how to install, use this link:
http://www.oracle.com/technology/obe/start/index.html
scroll down the page to "EM Grid Control 10g" and select "Oracle Enterprise Manager 10g Grid Control", there are currently 4 versions supported with screenshots here, enjoy.
--Grummy.

How to Disable Group Manager Tab for Specific OU(Organizational Unit)

Hi All,
How can i disable Group Manager Tab for particular OU(Organizational Unit) in OAM 10.1.4.0.1? Where should i configure to disable this particular stuff?
Can someone please give suggestions on this issue?
Thanks,
Ganesh

Hi Ganesh,
If you have many OUs under the searchbase that you want to include, but one that you want to exclude, then you could add a filter to the Group Manager tab (in Identity System Console/Group Manager configuration/Tabs menu item) like:
(!(ou:dn:=mygroup))
where mygroup is the ou that you want to exclude
Depending on your ldap sctructure, it may be more appropriate to add searchbases that you want to include rather than use filters to exclude those that you don't want.
Regards,
Colin

How to access Enterprise manager from another computer

Hi There,
I have Oracle 10g installed on a PC. I can access EM from that PC.
I would like to know how would I access EM Dbconsole from another computer under same LAN.
Thanks
Raf

Opening the web browser, you can specify the hostname and the port configured to listen the incoming call.
For example:
https://hostname:port_number/em
or
https://ip_address:port_number/em
you can get information about the information that you need from the "emctl"
emctl status dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
https://hostname:1158/em/console/aboutApplication
Oracle Enterprise Manager 11g is not running.
Best regards !
Shin-Iti.

How to disable enterprise manager's security

Similar Messages

Maybe you are looking for