How to disable external requests to J2EE Engine
Hi all,
We have setup an EP6 SP9 SR1 portal environment.
For security reasons, we have implemented SSL between the client and IIS, and between IIS and the J2EE engine.
We want the users to access the portal via IIS, and disable direct access via WAS.
In other words,
<u>https://ourportal.com/irj/</u>
is allowed, and
<u>http(s)://ourportal.com:50x00/irj/</u>
should be inaccessible.
As a result, only requests coming from IIS are allowed.
In addition, additional dialog instances <u>should</u> have access to the central instance, so this communication should not be obstructed.
Is there a way we can prevent users from logging in directly to the portal via the application server?
With best regards,
Robin van het Hof
Hi Robin,
If you logon to the admin tool and go to cluster > server > kernal > IPVerificationManager there is a way to set which IP addresses are allowed to access the J2EE Engine. That should solve your problem. You just need to modify the file mentioned there which is cfg/kernel/hosts.txt
Take a look at http://help.sap.com/saphelp_erp2004/helpdata/en/53/e51e3e6217b40be10000000a114084/content.htm for the syntax.
Cheers..
Craig
Similar Messages
-
How do I stop and start J2EE engine manually on WEB AS
I have installed WEB AS ABAP + JAVA. For some reason J2EE engine is not up after the Java stack installation. How to I start and stop J2EE engine. The visual Admin is not connecting either saying connection lost.
I am running on Linux
thanksHi Dhandu,
Please have a look in the <a href="http://help.sap.com/saphelp_nw04/helpdata/en/6e/dd0041aafdf123e10000000a155106/frameset.htm">documentation</a>.
Hope that helps!
Vladimir -
How to disable external VGA and also enable onboard VGA
hello,
my spec is
cpu corei5 ivybridge
mis zh77A GA43
vga hd7770 msi
i want to know, how to disable external VGA and also enable onboard VGA ??
and
i want to ask too, if i disable external VGA In MB, it is my external VGA still consumption power? or i must unplug my external VGA ?
how much different power consumption between external VGA and onboard VGA on idle time?
because my computer each night be used for download, i want to save power as i can...
also there is a eco mode? i want to know about eco mode, how much power can be save under eco mode? on idle time computer
sorry my bad englishWell remove the HD7770 and is disabled and doesn't consume any power. You can't enable or disable it the discrete vga when pc is in use. That board does also not support Virtu.
The possible power saving beacuse of eco mode depends on the individual systems. There is no general value. Just try it. -
How to hide system related info (J2EE Engine, JVM, OS) from View Source
Hi Experts,
We are developing an external facing webdynpro application for our customers. When i right click on webdynpro application in browser and select View Source , it is showing all system specific information such as DC names including model DC , JVM , System OS information (below is exact details).
I believe this will give enough information for Hackers to know about system with out much efforts. Is there any we can avoid showing this information part of browser view source.
Your comments are highly appreciate.
This page was created by SAP NetWeaver. All rights reserved.
Web Dynpro client:
HTML Client
Web Dynpro client capabilities:
User agent: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; MDDR; .NET CLR 3.0.04506.648; .NET CLR 3.5.21022; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; InfoPath.2), client type: msie6, client type profile: ie6, ActiveX: enabled, Cookies: enabled, Frames: enabled, Java applets: enabled, JavaScript: enabled, Tables: enabled, VB Script: enabled
Accessibility mode: false
Web Dynpro runtime:
Vendor: SAP, build ID: 7.0013.20080513102531.0000 (release=NW04S_13_REL, buildtime=2008-05-15:05:17:09[UTC], changelist=41322, host=pwdfm114), build date: Wed May 28 15:51:08 EDT 2008
Web Dynpro code generators of DC companyname.us/projUI:
SapDictionaryGenerationCore: 7.0014.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-11-10:15:49:06[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
SapMetamodelWebDynpro: 7.0014.20070703112649.0000 (release=645_VAL_REL, buildtime=2007-11-10:15:51:55[UTC], changelist=454024, host=PWDFM101.wdf.sap.corp)
SapMetamodelCore: 7.0014.20061002105432.0000 (release=645_VAL_REL, buildtime=2007-11-10:15:37:23[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationTemplates: 7.0014.20071029095230.0000 (release=645_VAL_REL, buildtime=2007-11-10:16:06:13[UTC], changelist=466194, host=pwdfm101)
SapWebDynproGenerationCTemplates: 7.0014.20071029095230.0000 (release=645_VAL_REL, buildtime=2007-11-10:16:06:13[UTC], changelist=466194, host=pwdfm101)
SapGenerationFrameworkCore: 7.0014.20060719095755.0000 (release=645_VAL_REL, buildtime=2007-11-10:15:36:46[UTC], changelist=411255, host=PWDFM101.wdf.sap.corp)
SapIdeWebDynproCheckLayer: 7.0014.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-11-10:15:55:29[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
SapMetamodelDictionary: 7.0014.20060719095619.0000 (release=645_VAL_REL, buildtime=2007-11-10:15:46:17[UTC], changelist=411251, host=PWDFM101.wdf.sap.corp)
SapMetamodelCommon: 7.0014.20061002105432.0000 (release=645_VAL_REL, buildtime=2007-11-10:15:37:28[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationCore: 7.0014.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-11-10:15:55:37[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
SapDictionaryGenerationTemplates: (unknown)
Web Dynpro code generators of DC sap.com/tcwddispwda: No information available!
Web Dynpro code generators of DC companyname.us/projECCModel:
SapDictionaryGenerationCore: 7.0013.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:57:42[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
SapMetamodelWebDynpro: 7.0013.20070703112649.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:00:50[UTC], changelist=454024, host=PWDFM101.wdf.sap.corp)
SapMetamodelCore: 7.0013.20061002105432.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:45:23[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationTemplates: 7.0013.20070717142021.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:15:27[UTC], changelist=455669, host=pwdfm101)
SapWebDynproGenerationCTemplates: 7.0013.20070717142021.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:15:27[UTC], changelist=455669, host=pwdfm101)
SapGenerationFrameworkCore: 7.0013.20060719095755.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:44:42[UTC], changelist=411255, host=PWDFM101.wdf.sap.corp)
SapIdeWebDynproCheckLayer: 7.0013.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:04:26[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
SapMetamodelDictionary: 7.0013.20060719095619.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:54:53[UTC], changelist=411251, host=PWDFM101.wdf.sap.corp)
SapMetamodelCommon: 7.0013.20061002105432.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:45:30[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationCore: 7.0013.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:04:37[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
SapDictionaryGenerationTemplates: 7.0013.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:57:50[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
Web Dynpro code generators of DC sap.com/tcwdcorecomp: No information available!
Web Dynpro code generators of DC companyname.us/projModel:
SapDictionaryGenerationCore: 7.0013.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:57:42[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
SapMetamodelWebDynpro: 7.0013.20070703112649.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:00:50[UTC], changelist=454024, host=PWDFM101.wdf.sap.corp)
SapMetamodelCore: 7.0013.20061002105432.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:45:23[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationTemplates: 7.0013.20070717142021.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:15:27[UTC], changelist=455669, host=pwdfm101)
SapWebDynproGenerationCTemplates: 7.0013.20070717142021.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:15:27[UTC], changelist=455669, host=pwdfm101)
SapGenerationFrameworkCore: 7.0013.20060719095755.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:44:42[UTC], changelist=411255, host=PWDFM101.wdf.sap.corp)
SapIdeWebDynproCheckLayer: 7.0013.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:04:26[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
SapMetamodelDictionary: 7.0013.20060719095619.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:54:53[UTC], changelist=411251, host=PWDFM101.wdf.sap.corp)
SapMetamodelCommon: 7.0013.20061002105432.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:45:30[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationCore: 7.0013.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:04:37[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
SapDictionaryGenerationTemplates: 7.0013.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:57:50[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
J2EE Engine:
7.00 patchlevel 34391.450
Java VM:
Java HotSpot(TM) 64-Bit Server VM, version: 1.4.2_13-b06, vendor: Sun Microsystems Inc.
Operating system:
Windows 2003, version: 5.2, architecture: amd64
Edited by: Aravinda Boyapati on Nov 23, 2009 11:54 PMHi Armin,
I have the same behavior here. Prod is showing all this info. I assume this is some variable that we need to setup in Prod J2EE. Could you please tell me what is it?
Also, would that change the stack trace? - Currently, we have WDP dumps in Prod, something that I would get rid off (and have just a 500 error page defined).
Thanks,
Daniel -
How to Upgrade java version on J2EE Engine Server?
Hi Experts,
We are running the NetWeaver 2004s SP 7 with Java version 1.4.2_08 on the server, but we would like to upgrade the system and be able to upgrade to Java version 1.5. How do we start? We would greatly appreciate your responses.
Thanks,
-Don P.but we would like to upgrade the system and be able to upgrade to Java version 1.5
Can you explain this more accurately? For example the OS version
Are you say about SUN or IBM JDK? I'm think you say about SUN JDK ...when only 1.4.2.XXXX can be installed for
NW 7.0, Do not use
Java version 1.5
In any case Try to check the
Note 709140 - Recommended JDK and VM Settings for the WebAS630/640/7.0
You will see all JDK/OS mixes and link's to recuired notes ....
About how to change java version, for example to newest release ? -->
Note 718901 - How to Change the JDK of the J2EE Engine
Regards. -
How do u restart and monitor J2EE engine from Visual Admin?
Hi mates,
How do you restart J2EE engine from VA?
From VA, is there any way we can monitor if the J2EE engine is rebooting properly or got stuck somewhere?
thx in adv
praveenHi Praveen,
1) I don't think you can monitor from SAP GUI. SMICM will only allow you also to trigger a reboot via Administration / J2EE server but for the rest it's happing all in the background with no visibility.
2) The dispatcher node is the 'SAP WEB dispatcher' component which is an independent component / product and ( can ) act as the load balancer
You can also install it standalone to act e.g. as a reverse proxy.
3) The J2EE node represents the J2EE server
rgds
Dirk -
JCO connection tab in disabled mode in sap J2EE engine/webdynpro/local/proj
Dear all,
I'm developing the simple webdynpro object using netweaver developer studio, but when i deploy it to sap J2ee engine and go there to set the JCO connection, I find the jco connectiuon tab in the diabled mode. I need to configure the new jco connection in order to run the project. Please suggest.
thanks,
Anup.Hi Anup,
You can find service "SLD data supplier" under server->services list.
Refer following links for configuring SLD and JCO connections:
Re: Web Dynpro - Problem with (SLD) JCO Connection
Re: Configuration of SLD
Regards,
Bhavik -
How to disable external display (s-video adapter)
My problem is this:
I have the new iMac in my office and I have my widescreen TV (CRT non-HDTV) on the other side of the wall in the living room. I recently purchased the Apple video adapter so I could run a s-video cable through the wall to my TV. I got it to work fine but how do I disable it? If I have mirroring on (only way to use Front Row) my iMac screen resolution drops obviously but I can't turn native screen resolution back on without either a) turn off mirroring b) remove video adapter.
Surely there is a better way to do this?
Joshua.I'm not a hundred percent sure this will work for you since I've never used svideo out on my mac before, but if it works similar to dvi out, then do the following:
1. Set you tv up as extended desktop rather than mirror. This will allow you to set different resolutions on the internal and external monitors.
2. When you want to use the TV for front row, drag the Menu bar from the internal monitor to the external monitor in the monitors system pref. This will make your tv the controlling monitor and front row will play on it.
3. When you finish with front row, drag the menu bar back to the internal monitor.
Again, this works when I have my dvi cable connected to my tv, I'm not sure if a svideo output is treated the same way, though I would think it should be.
Glor -
How to check if classpath of J2EE Engine refers to library(jar) ?
I have access to SDM Manager tools, how to check using this tools if library is in classpath.
Because during deployment of EAR file containing websevice I receive exception about absent of library com.sap.mdm.tech.mdm4j.Dear rkandy,
Thank you for your comment.
Now our browser expiring info doesn't count
number. Maybe it remain enough days .
Do you know what number the counter starts with ??
Best Regards
MASAKI -
How to disable HTTP proxy on J2EE ?
Hi,
It appears that Sun Application Server 8.2 can be used as a HTTP proxy.
Is it possible to disable this behaviour and still serving web apps ? am I saying bullshits ?
Regards,
Laurent.I am saying bullshits. Sorry. Application Server does not act as a HTTP Proxy.
-
How to disable the request reassignment
In my OIM implementation, requests are submitted to a group, hence reassignment is not allowed. Is there a way to hide the "Reassign" capability when a user is looking at his/her Pending Approvals page?
thanksHi
We had similar requirement and we went with OIM dataset validator to accomplish this.
This dataset validator is triggered when a user clicks on submit button end of the request. Here you can check if the usr already has the resource provisioned using OIM APIs and throw appropriate message to the user. This way user is prevented from submitting the request again.
Here is some additional info:
http://docs.oracle.com/cd/E14571_01/doc.1111/e14309/request.htm#OMDEV3052
Regards
user12841694 -
How to deploy an EAR or WAR into our J2E(J2EE Engine of SAP)
I got a solo WAR but I don't know how to deploy it into our J2EE Engine(J2E). If you have any same or similar experience,can you give me some help?
Any advice is popular. Thanks!Hello,
If you use 6.20 release of J2EE Engine then have a look at <j2ee root directory>/docs/deploymanual.pdf.
If you have J2EE Engine 6.40 and an already built war file then most probably the easiest way to assemble it and deploy it will be to use the deploy tool (http://help.sap.com/saphelp_nw04/helpdata/en/35/e3ee3da7138e5be10000000a114084/frameset.htm) Usually we use the NetWeaver Developer Studio to build and deploy J2EE Applications (http://help.sap.com/saphelp_nw04/helpdata/en/fe/a3996fa314f94f8a0c3475b08636d0/frameset.htm).
Best Regards
Vyara -
Stopping only J2EE engine from MMC
Dear Gurus,
I have a ABAP+Java stack 2004s instance. Can you please advice me how I can stop only the J2EE engine from the MMC.
Thanks!
Surya.The instance '01' is not j2ee. That is actually the SCS01 instance which is the standalone message and enqueue server for the j2ee components. Do not stop the '01' instance while j2ee is running.
In SAPMMC of a 700 dual stack you can only stop/restart the individual elements (SDM, server#, dispatcher) of J2EE. There is no mechanism for a complete restart of j2ee (without stopping R/3). Please keep in mind that if you restart the individual elements in SAPMMC the bootstrap synchronization will not occur (synchronization with with DB). This means that if you make any changes to the J2EE core components the changes will not be realized in the system until a full restart is done.
Here are the ways to stop the j2ee stack independently of R/3:
- JCMON: Use JCMON tool (jcmon pf=<instance profile>) and navigate through the menu to the shutdown option.
- R/3 SMICM: Go to transaction SMICM in the R/3 stack and navigate to Administration-> J2EE Instance (Local)->
Send Soft Shutdown-> Without Restart
- SAPMMC: In sapmmc navigate to '<hostname> 0'-> J2EE Process Table-> Select each of the J2EE nodes by right clicking-> Disable process
Note: The sapmmc option does not stop the jcontrol process (parent process of the j2ee components) and therefore the bootstrap synchronization will not occur when you select "Enable process" to restart.
Regards,
Nathan
Edited by: Nathan Swenson on Jan 24, 2008 3:07 PM -
Hello,
Can anyone tell me how to check the status of J2EE engine thorugh R3?. Is there any T-code which shows that?
Thanks& Regards,
JobyDear John,
I am not able to find AS Java in the tool bar in the T-code: smicm
But I think we can find out the AS JAVA Status in SMICM
Goto->HTTP Server->Display Data.
Your answer was helpful.
Thanks!
Joby -
Hi experts.
J2EE engine will not start. Below is the lower section of the trace. I'd appreciate help with interpretation as I am a NW newby.
I just installed an J2EE key in tcode SLICENSE for our developer's subscription NW 7.0 instance. Another thread implied installing the J2EE key in visual administrator, but how is that possible if the J2EE engine is not running? I cannot establish a connection.
Thanks,
Aron
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1633]
***LOG Q0K=> DpMsAttach, mscon ( S-SAPDEV01) [dpxxdisp.c 11822]
DpStartStopMsg: send start message (myname is >S-SAPDEV01_DS1_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Tue Jul 08 13:43:35 2008
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 146
Release check o.K.
DpJ2eeLogin: j2ee state = CONNECTED
Tue Jul 08 13:43:37 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 236
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:4027) [nixxi.cpp 4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=5508)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
MBUF state ACTIVE
Tue Jul 08 13:43:38 2008
DpModState: change server state from STARTING to ACTIVE
Tue Jul 08 13:44:14 2008
J2EE server info
start = TRUE
state = STARTED
pid = 3412
argv[0] = D:\usr\sap\DS1\DVEBMGS00\exe\jcontrol.EXE
argv[1] = D:\usr\sap\DS1\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\DS1\SYS\profile\DS1_DVEBMGS00_S-SAPDEV01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64998
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=DS1
argv[7] = -DSAPMYNAME=S-SAPDEV01_DS1_00
argv[8] = -DSAPPROFILE=D:\usr\sap\DS1\SYS\profile\DS1_DVEBMGS00_S-SAPDEV01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Tue Jul 08 13:44:17 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 6 / sock 668
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:4095) [nixxi.cpp 4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3412)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Tue Jul 08 13:44:34 2008
J2EE server info
start = TRUE
state = STARTED
pid = 5156
argv[0] = D:\usr\sap\DS1\DVEBMGS00\exe\jcontrol.EXE
argv[1] = D:\usr\sap\DS1\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\DS1\SYS\profile\DS1_DVEBMGS00_S-SAPDEV01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64997
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=DS1
argv[7] = -DSAPMYNAME=S-SAPDEV01_DS1_00
argv[8] = -DSAPPROFILE=D:\usr\sap\DS1\SYS\profile\DS1_DVEBMGS00_S-SAPDEV01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Tue Jul 08 13:44:37 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 208
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:4105) [nixxi.cpp 4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=5156)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Tue Jul 08 13:44:54 2008
J2EE server info
start = TRUE
state = STARTED
pid = 6072
argv[0] = D:\usr\sap\DS1\DVEBMGS00\exe\jcontrol.EXE
argv[1] = D:\usr\sap\DS1\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\DS1\SYS\profile\DS1_DVEBMGS00_S-SAPDEV01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64996
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=DS1
argv[7] = -DSAPMYNAME=S-SAPDEV01_DS1_00
argv[8] = -DSAPPROFILE=D:\usr\sap\DS1\SYS\profile\DS1_DVEBMGS00_S-SAPDEV01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Tue Jul 08 13:44:57 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 6 / sock 200
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:4117) [nixxi.cpp 4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=6072)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWNActually it was to remove compression, not to allow archiving. Sorry!
We're using Windows Server 2003. Right-click on a folder or file, choose Properties. Click on the Advanced button on the General tab. Remove the check box for Compress to save disk space, click ok. When you click on Apply there will be a prompt to apply just to that folder only or on subfolders and files as well.
When compression is applied, the text for the folder turns blue. When is not applied, the text is black.
Maybe you are looking for
-
Hello, 2 questionss here>is it possible or is there a way to convert all object s outlines in all frames to fills at once and not frame by frame? and why sometimes erases the outline instead of converting it to fill?
-
Numeric fields and display values
Hi All, I have a few numeric fields in my form. I want to display "null" in those fields when they do not contain a value in the db i.e. whenever the fields are left blank they should display "Null" in the form but will have a Null value in the db. A
-
5,000 songs cannot be located after installing 7.0.
After installing Version 7, iTunes can no longer locate half of my songs (any who's title was not perfectly formatted "Artist - Song Title" and had to be altered. Am I really supposed to go in and relocate every single song who's title was altered ON
-
Unable to save images from image preview or photoshop to network drive
Hello, I have an issue when viewing an image file from image preview or photoshop and saving it to a mapped network drive. When trying to save it to the drive, I am met with the error "You don't have sufficient access privileges". However, I am able
-
HT3576 A plea to improve the "Next Destination" feature
I L-O-V-E the "Next Destination" feature that occasionally pops up on my iPhone 4S pull-down screen. UNFORTUNATELY, it only comes up randomly and infrequently, and seldom when I really need it. I've been told that the feature "educates" itself based