How to disable hp driver network discovery on windows 7

I installed the HP "Full solution" webpack driver and software for an "HP LaserJet 100 color MFP M175 PCL6". The installer is "CLJ_MFP_M175_N_sw_win_full_solution.exe".
I think I "discovered" my network printer on my home network when I first installed the driver.
The problem is that the driver continues to spam UDP network traffic on port 427 periodically (every few minutes). The process that's generating the traffic is "spoolsv.exe", but the call is from "hpzjcd01.dll" - "HP Network Printer Installation SDK".
I have tried removing the driver with no luck. I don't want to uninstall the driver anyway, I just want to stop all the network noise.
Can anyone help? Thanks so much!

I will do my best to help you but you may be a tad more advanced than I am. So, is the print spooler eating up your network resources? What kind of computer do you have (Windows 7, Windows 8, etc)? Have you tried stopping the Print Spooler under Services to stop it? Tell me if that option works for you. I hope I can help!
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Similar Messages

How to disable icloud drive?

I enabled icloud Drive when updating my iphone to ios 8, but Yosemite (wich is required on my mac to make my documents work with Drive) is not released in Norway until late october or later. My Q: How do I disable icloud drive now?

Hi,
Thanks for both your responses. Well that was an unexpected answer. Oh well too late now.
At least now I know. Next time I'll say 'no' to everything to be sure
Thanking you kindly. I appreciate you quick response.
Kind regards.

How to disable CD-DRIVE checking, while using a Dolphin file manager

Hello.
I would like ask for a help. I have one problem that's quite annoying. It is related to checking cd-drive when using a dolphin file menager. It always cheecks it when Dolphin is launched from K or launcher on taskbar for the first time, again it happens when i close it and open again.
Is there a way to disable checking of cd-drive in Dolphin? This behaviour occurs on KDE with all linux system that i checked: Slackware, Arch, Kubuntu. Look at this:
Disabling CD-DRIVE checking, while using a file manager
I would like to disable it in order to speed up opening Dolphin, launching it.

Udisks2 is what dolphin uses to handle external drives of all kinds (USB, optical, etc). Udisks is an automounting tool that allows normal users to mount disks. The permission handling before was handled with consolekit and has now been replaced by systemd-logind (which is much better anyway). So what I am suggesting is that it might be that dolphin is using udisks2 as the tool that polls for the existence of a disc in your optical drive.
Unfortunately, it is a bit more confusing than that because udisks2 is the replacement for the original udisks. It is totally different and not compatible. So I remember seeing a way to turn off optical drive polling, but I cannot remember if it was udisks or udisks2. But it was done with a udev rule.
So I think if you tried to google for "udisks optical (or cd or dvd) polling" or something like that, you might be able to figure out how this is done.
Edit: unfortunately, I do not use dolphin or udisks2. But I do have the original udisks installed.
Edit2: It seems that the method I remembered is for the original udisks.
Last edited by WonderWoofy (2013-07-25 17:51:56)

How to disable or lock network config button on mozilla firefox 7 ?

hii... i want to know how to disable network config button or disable/lock advanced button on option mozilla firefox..
thank you
regards..

See http://kb.mozillazine.org/Locking_preferences

How to disable optical drive?

My optical drive is intermittently going crazy and crashing my system. I've gone through all the support options - hardware test, PRAM reset, PMU reset. Nothing works. So I don't have time to take in to get fixed right now. Apple tech says there's a command line way to disable the drive but they won't tell me what it is. Does anyone have a link to the site or know how to do it?

None I know of short of (ugh) a) voiding the warranty by opening up the computer to pull the plug on it or b) putting tape over the slot.

How to disable super drive in macbook boot?

i would like to know if there is a way to disable optical drive in boot sequence?
like in windows you can set the boot sequence and then the boot is quicker.
and also the noise the optical drive makes is a bit annoying.
any idea anybody?
thanks

Hi S,
If you have the newer unibody style, it's very easy. If it's one of the earlier models, it's considerably more difficult. Go to Apple Menu > About This Mac > More Info > Hardware and find your Model Identifier. Then go to ifixit.com, or powerbookmedic.com or macsales.com or youtube or others and there are illustrated, detailed directions. Good luck to you and post back if you have further questions.

How to disable Versions for network shares?

AFP share points with network shares works great, but Versions will lock a file that one user saves, and wont allow another user to overwrite the file because of it. Is there a way to disable Versions for networked files?

Or perhaps even just disable file locking? Lion Server will work great for my organization, but only if I can allow more than one person open and save a file!

Enabling network discovery on Windows Server 2012 R2

Good afternoon.
As per the title, I have set-up a new server at work. The server is running no problem but none of the other computers connected to the network can 'see' the new server. I've gone into the control panel and tried to turn on the network discovery, but it just
defaults back to 'off'.
I did so a search on here first before troubling anyone and I did find this answer :
Thanks for the post.
I did some research and found this issue may occur if the dependency services are disabled. Please make sure the following services are enabled and running.
- SSDP Discovery
- UPnP Device Host
Disabling Network Discovery/Network Resources"
That may well be the answer, but unfortunately that means absolutely nothing to me.
Is someone able to help me try and switch this on, but by offering an explanation an 'idiot' would understand.
Thanks in advance.

Hi,
This issue occurs for one of the following reasons:
•The dependency services for Network Discovery are not running.
•The Windows firewall or other firewalls do not allow Network Discovery.
To resolve the issue, follow these steps:
1.Make sure that the following dependency services are started:
DNS Client
Function Discovery Resource Publication
SSDP Discovery
UPnP Device Host
2.Configure the Windows firewall to allow Network Discovery. To do this, follow these steps:
Open Control Panel, click System and Security, and then click Windows Firewall.
In the left pane, click Allow an app or feature through Windows Firewall if you are running Windows Server 2012. Or, click Allow a program or feature through Windows Firewall if you are running Windows Server 2008 or Windows Server 2008 R2.
Click Change settings. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
Select Network discovery, and then click OK.
3.Configure other firewalls in the network to allow Network Discovery.
4.Turn on Network Discovery in Network and Sharing Center
Quote from http://support.microsoft.com/kb/2722035
Steven Lee
TechNet Community Support

How to disable UAC for standard account in windows 8.1 single language OS

Hi,
How to Disable UAC in a standard account on windows 8.1 single language OS.
application for mobile modem (TATA DOCOMO) always asks for administrator password, in windows 7 I used to just set UAC never Prompt in admin account and same setting would reflect in standard user account and then users where not prompted for password but in
windows 8.1 single language edition I have disabled UAC in admin account but in standard account the setting for UAC was still in default (notify me when programs try to make changes to my computer), if I try to set never, the ok button is greyed out with
message saying that you must be logged in as administrator.
And Group policy editor, local security policy are not available in windows 8.1 single language.
can any one give command to disable UAC using CMD.
OR
set registry to not prompt for admin password.
Thanks in advance..........

Hi Ed,
But in control panel -> user accounts -> Change user account control settings
I can set the settings to always notify
and default notify when programs try to make changes to computer.
But I can't set it to never prompt because only administrator as power to do that and if I set never prompt in administrator account the settings in standard user remains in
always notify.
so please let me know, if there is any other way to over come the problem.
Main problem is application from unknown source always prompt for admin password.
I need to disable it from prompting for admin password to run applications in standard accounts.

How to disable or remove Remote Desktop in Windows 7 Pro

Hello,
I need to be able to disable, turn off, uninstall, or restrict Remote Desktop Connection completely on student laptops running Windows 7 Pro. The students do not take their laptops home.
Can someone please assist me with a definite way to remove the possibility of it's use by students?
Thank you

Hi,
Check this KB: How to disable Remote Desktop by using Group Policy
You can also use the Applocker feature to block the remote desktop program or don't run specified Windows applications
Revue du Geek |
Déployer Windows 7 avec MDT 2010

How to Disable Usb Selective Suspend Setting For Windows 8.1 Via Gpo/Registry

Hello everyone,
Could help me with a question ?
How do I disable USB Seletive Suspended settings in Windows 8.1 is GPO / Registry ?

Good morning.
The procedure worked , sorry for the delay because the tests were running in the environment, will replicate via GPO solution.
I appreciate the help .

How to disable Wifi and Network access in low level setting for security ?

Hi
New to here
One of our final customer bought imac last months. OS 10.9, SN is c02*******J4i
Since they are security printing, all the necessary ports accessing to outisdes need to be disabled in low level setting(not the ons just like turn on and off ).
The ports including USB storage, Network and WIFI.
I googled and found the following
Open the /System/Library/Extensions folder.
To remove support for USB mass storage devices, drag the following file to the Trash: IOUSBMassStorageClass.kext
Open Terminal and enter the following command: $ sudo touch /System/Library/Extensions The touch command changes the modified date of the /System/Library/Extensions folder. When the folder has a new modified date, the Extension cache files (located in /System/Library/) are deleted and rebuilt by Mac OS X.
Choose Finder > Secure Empty Trash to delete the file.
Restart the system.
I want to confirm this before sending to final user. Since I didn't have mac on hand, just wonder whether there are similar kext files for network and wifi to remove.
Just like step 2 described.
I would like customer to backup these files before permanently removed.
Many thanks
Kevin
<Edited By Host>

chiqui wrote:
Is it possible to disable Internet access point and WAP as when I use WiFi some connections to WAP server of my provider are still made and I get charged. I am looking for the option not to delete it entirely from the access point list, but rather disable it as I might need connection when WiFi is not available and I want to be able to enable it as once I delete the server name and setting I won't know it.
Is it possible to do it and how?
You could delete WAP accesspoint. Not all providers (carriers) allow this.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

How to disable nouveau driver?

Hi I'm trying to install my nvidia graphics drivers, when I close x and run the installer it complains that I need to disable the nouveau driver and run the installer again. It tries to do this itself but it fails.
Any idea how to manually disable it?
Many thanks
Mike

You may need to create your own modprobe.conf blacklist file and add a line in your grub.conf file in order not to load Nouveau at system startup:
# echo "blacklist nouveau options nouveau modeset=0" > /etc/modprobe.d/disable-nouveau.conf
Edit /etc/grub.conf file and add the following to the end of your kernel line: rdblacklist=nouveau

Security question, how to disable USB drives?

Hi. We´re implementing security measures on our small office, and in the account settings I´ve disabled cd burning for a given account, but I also want to diable the use of USB drives except for the compnay one. Is there a way to achieve this? Thanks

Just FYI no matter how many securities you put on a USB port, there is always a way around it, but you can buy usb lock plug ins online. They are called USB locks. I don't know where to find them off the top of my head. they plug into the usb connector in the back of your computer.
Message was edited by: mobias

CD and paper stuck in drive - How to disable the drive?

So I didn't pay attention and put a CD into my Intel iMac's CD drive that had a piece of paper stuck to the back of the CD. And now, of course, it won't come out again.
I've been through all the advice on here, YouTube, ... you name it and came to the conclusion that a trip to an Apple retailer (no Apple Store here yet) is the only solution.
However, until then, I'd like to disable the CD/DVD drive to keep it from trying so that I can at least use my iMac. Any ideas how to do that?
I found instructions to remove the IOCDStorageFamily.kext and IODVDStorageFamily.kext kernel extensions, clear the kext cache and reboot. But it's still trying to read or eject the CD, over and over again ...
Any other ideas?
This is a first-generation Aluminum iMac (Mid 2007), running Mac OS X Lion 10.7.3.

Hadn't seen that video and it looks like it could work. But the CD drive in an aluminum iMac is different and I couldn't get 2 credit cards in. I've tried with one and the sticky tape but that didn't work.
The drive has now finally gone silent. Not sure, though, if it finally caught on about the disabled kext drivers or if I've managed to leave some of the sticky tape in the drive itself and it really needs repair now
So, problem not exactly "solved" - but thanks for the help!

How to disable hp driver network discovery on windows 7

Similar Messages

Maybe you are looking for