How to disable incompatible Mail plug-ins?

When opening Mail 6.5 (build 1508) in OSX 10.8.4, I get the following error message:
Incompatible Plug-ins Disabled
Mail has disabled the following plug-ins:
          Letter Opener
Contact the makers of these plug-ins for versions that are compatible with Mail 6.5 and Message 6.5.
I never use the Letter Opener plug-in anymore, so I would be totally fine with simply deleting it.  However, I can't find it anywhere on my system.  I did a bit of research and it appears that Mail plug-ins should appear in ~/Library/Mail/Bundles ... but I don't have a "Bundles" folder at that location.
Any ideas where else to look?

Look here. There is a contact us link towards the bottom. Ask them for uninstall instructions.
http://www.creativeinaustria.com/LetterOpenerPro?utm_source=versiontracker.com&u tm_medium=referral&utm_campaign=Distribution%2BChannels

Similar Messages

  • I have CS4 In design but when I try to open a certain file I get the answer that all plug in´s is not in my program. How can I update my plug ins?

    I have CS4 In design but when I try to open a certain file I get the answer that all plug in´s is not in my program. How can I update my plug ins?

    <moved from Downloading, Installing, Setting Up to InDesign>

  • How do I get my plug ins (Nik and Topaz) to work on Photoshop Creative Cloud? [was:Plug ins?]

    How do I get my plug ins (Nik and Topaz) to work on Photoshop Creative Cloud?

    Contact the makers of your third party plugins and see if they have updates that work correctly with Photoshop CC 2014.
    Also, make sure you ran the installers for the plugins instead of just copying them, since you may be missing necessary support files for the plugins.

  • How to install third party plug-ins from photoshop elements 11 to new 13 in my PC win7?

    how to install third party plug-ins from photoshop elements 11 to new 13 in my PC win7?
    Thank you.

    Hi ,
    Your windows is 32 bit or 64 bit .
    If win 7 32 bit
    Just copy the plugin from PSE 11 and paste it to PSE 13 plug-in folder.
    If win 7 64
    PSE 11 and PSE 13 are installed as a 32 and 64 bit respectively , so you need to install plug-in again.
    Thanks,

  • How do I unblock Blocked Plug-ins?

    I just downloaded and installed the latest version of Safari.  Now during some internet searches, the message "Blocked Plug-in" appears on my screen.  This never happened before I installed the new version of Safari.  How can I unblock all plug-ins?

    I updated Flash and still have blocked plug ins - what now?

  • How do I reinstall Safari plug-ins?

    How do I reinstall Safari plug-ins, for example, the Google Earth plug-in? Should I delete the old one first, or is it ok to just install on top of it?
    I am having trouble with the Google Earth plug-in working.
    thanks

    Delete the old one first. However, if you just open the Extensions preferences in Safari you can click the Update button to download new updates if they are available.

  • I have just updated my plug in & add ons, but they are several that say to research. How do I know what plug ins are necessary for mozilla to run properly. I really don't want a bunch of unnecessary downloads on my computer

    I have just updated my plug in & add ons, but they are several that say to research. How do I know what plug ins are necessary for firefox to run properly. I really don't want a bunch of unnecessary downloads on my computer

    None are '''''necessary''''' to use Firefox, but some parts of some web pages aren't going to work without a specific plugin being installed.

  • How do I update my plug-ins?

    How do I update my plug-ins at in design?

    Probably you are working in an older version and are trying to open an INDD from a newer version.
    Either upgrade to the same version or ask for an IDML file.
    But you should inform us, which version you have and from which version the INDD comes from.

  • How do I install my plug-ins for Photoshop CC

    I just installed Photoshop CC. I have been using CS6 with some plug in from topaz and others. How do I get the plug ins into PS CC?
    Thanks
    John

    Moving this discussion to the Photoshop General Discussion forum.

  • Hi how/where do I upgrade plug-ins for InDesign CS6 6.0.6?

    Hi how/where do I upgrade plug-ins for InDesign CS6 6.0.6?

    6.0.6 is CS4, not CS6 (which is version 8).
    Why do you need to upgrade plugins? Are you getting an error  message trying to pen a file? That meas the file was saved from a newer version of ID, and you'll need either the newer version, or an IDML file exported from the original. You can't upgrade plugins to make this work.

  • How to "not" share FCP Plug-ins with other users

    I'm Installing FCP on a new Intelmac. Several users/editors will use the computer in the editsuite.
    how can you install your FCP plugins so that they only load if your loggin with your useraccount.
    in other words how to NOT share your plug-ins with other useraccounts.... ?
    2.5 GHz dual Quad G5 + 933 QuickSilver G4 Mac OS X (10.4.9) 2x 23" Cinadisplay, Digidesign Digi 002R

    Hello
    Hopefully I'm not infringing the Terms Of Use by asking you to have a look at THIS PAGE of the Apple Discussions guide.
    Regards,
    J

  • How do you remove malware plug ins from safari

    how do you remove malware plug ins from safari browser

    Go step by step and test.
    1. Download  free AdwareMedic by clicking “Download ” from here
        http://www.adwaremedic.com
       Install , open,  and run it by clicking “Scan for Adware” button   to remove adware.
       Once scanning and removing the adware is done, quit the app by clicking AdMedic in the menubar
        and selecting “Quit AdwareMedic”.
    Safari
    2. Safari > Preferences > Extensions
        Turn those off and relaunch Safari again.
    3. Safari > Preferences > Privacy > Cookies and other website data:
        Press “Remove all website data” button.
    Best.

  • How can I review my plugs ins, and disable some if needed?

    I notice that in the Windows Task Manager 'Processes' tab that my plugin-container from time to time uses quite a bit of CPU resources as well as memory. Is there a way to review my plug ins and then disable/remove/uninstall some if I wish?

    Troubleshooting Plugins
    * https://support.mozilla.com/en-US/kb/Troubleshooting%20plugins
    Check and tell if its working.

  • [SOLVED] How to disable "No mail." message upon login?

    This one's really stumping me. I disable the mail message a few months ago by creating a .hushlogin file in my home directory. That did the trick. Now, I am seeing the message again, and I don't know why. .hushlogin still exists in my home directory. Here's my /etc/login.defs:
    # /etc/login.defs - Configuration control definitions for the login package.
    # Three items must be defined: MAIL_DIR, ENV_SUPATH, and ENV_PATH.
    # If unspecified, some arbitrary (and possibly incorrect) value will
    # be assumed. All other items are optional - if not specified then
    # the described action or option will be inhibited.
    # Comment lines (lines beginning with "#") and blank lines are ignored.
    # Modified for Linux. --marekm
    # Delay in seconds before being allowed another attempt after a login failure
    FAIL_DELAY 3
    # Enable display of unknown usernames when login failures are recorded.
    LOG_UNKFAIL_ENAB no
    # Enable logging of successful logins
    LOG_OK_LOGINS no
    # Enable "syslog" logging of su activity - in addition to sulog file logging.
    # SYSLOG_SG_ENAB does the same for newgrp and sg.
    SYSLOG_SU_ENAB yes
    SYSLOG_SG_ENAB yes
    # If defined, either full pathname of a file containing device names or
    # a ":" delimited list of device names. Root logins will be allowed only
    # upon these devices.
    CONSOLE /etc/securetty
    #CONSOLE console:tty01:tty02:tty03:tty04
    # If defined, all su activity is logged to this file.
    #SULOG_FILE /var/log/sulog
    # If defined, file which maps tty line to TERM environment parameter.
    # Each line of the file is in a format something like "vt100 tty01".
    #TTYTYPE_FILE /etc/ttytype
    # If defined, the command name to display when running "su -". For
    # example, if this is defined as "su" then a "ps" will display the
    # command is "-su". If not defined, then "ps" would display the
    # name of the shell actually being run, e.g. something like "-sh".
    SU_NAME su
    # *REQUIRED*
    # Directory where mailboxes reside, _or_ name of file, relative to the
    # home directory. If you _do_ define both, MAIL_DIR takes precedence.
    # QMAIL_DIR is for Qmail
    #QMAIL_DIR Maildir
    MAIL_DIR /var/spool/mail
    # If defined, file which inhibits all the usual chatter during the login
    # sequence. If a full pathname, then hushed mode will be enabled if the
    # user's name or shell are found in the file. If not a full pathname, then
    # hushed mode will be enabled if the file exists in the user's home directory.
    HUSHLOGIN_FILE .hushlogin
    #HUSHLOGIN_FILE /etc/hushlogins
    # *REQUIRED* The default PATH settings, for superuser and normal users.
    # (they are minimal, add the rest in the shell startup files)
    ENV_SUPATH PATH=/sbin:/bin:/usr/sbin:/usr/bin
    ENV_PATH PATH=/bin:/usr/bin
    # Terminal permissions
    # TTYGROUP Login tty will be assigned this group ownership.
    # TTYPERM Login tty will be set to this permission.
    # If you have a "write" program which is "setgid" to a special group
    # which owns the terminals, define TTYGROUP to the group number and
    # TTYPERM to 0620. Otherwise leave TTYGROUP commented out and assign
    # TTYPERM to either 622 or 600.
    TTYGROUP tty
    TTYPERM 0600
    # Login configuration initializations:
    # ERASECHAR Terminal ERASE character ('\010' = backspace).
    # KILLCHAR Terminal KILL character ('\025' = CTRL/U).
    # UMASK Default "umask" value.
    # The ERASECHAR and KILLCHAR are used only on System V machines.
    # The ULIMIT is used only if the system supports it.
    # (now it works with setrlimit too; ulimit is in 512-byte units)
    # Prefix these values with "0" to get octal, "0x" to get hexadecimal.
    ERASECHAR 0177
    KILLCHAR 025
    UMASK 077
    # Password aging controls:
    # PASS_MAX_DAYS Maximum number of days a password may be used.
    # PASS_MIN_DAYS Minimum number of days allowed between password changes.
    # PASS_WARN_AGE Number of days warning given before a password expires.
    PASS_MAX_DAYS 99999
    PASS_MIN_DAYS 0
    PASS_WARN_AGE 7
    # Min/max values for automatic uid selection in useradd
    UID_MIN 1000
    UID_MAX 60000
    # System accounts
    SYS_UID_MIN 500
    SYS_UID_MAX 999
    # Min/max values for automatic gid selection in groupadd
    GID_MIN 1000
    GID_MAX 60000
    # System accounts
    SYS_GID_MIN 500
    SYS_GID_MAX 999
    # Max number of login retries if password is bad
    LOGIN_RETRIES 5
    # Max time in seconds for login
    LOGIN_TIMEOUT 60
    # Which fields may be changed by regular users using chfn - use
    # any combination of letters "frwh" (full name, room number, work
    # phone, home phone). If not defined, no changes are allowed.
    # For backward compatibility, "yes" = "rwh" and "no" = "frwh".
    CHFN_RESTRICT rwh
    # List of groups to add to the user's supplementary group set
    # when logging in on the console (as determined by the CONSOLE
    # setting). Default is none.
    # Use with caution - it is possible for users to gain permanent
    # access to these groups, even when not logged in on the console.
    # How to do it is left as an exercise for the reader...
    #CONSOLE_GROUPS floppy:audio:cdrom
    # Should login be allowed if we can't cd to the home directory?
    # Default in no.
    DEFAULT_HOME yes
    # If defined, this command is run when removing a user.
    # It should remove any at/cron/print jobs etc. owned by
    # the user to be removed (passed as the first argument).
    #USERDEL_CMD /usr/sbin/userdel_local
    # Enable setting of the umask group bits to be the same as owner bits
    # (examples: 022 -> 002, 077 -> 007) for non-root users, if the uid is
    # the same as gid, and username is the same as the primary group name.
    # This also enables userdel to remove user groups if no members exist.
    USERGROUPS_ENAB yes
    Please help.
    Last edited by nbtrap (2012-07-14 21:59:46)

    orbisvicis wrote:see "pam_mail.so" in /etc/pam.d/* and "man pam_mail". You most likely need the nopen argument.
    Thank you. I fixed it by changing a line in /etc/pam.d/system-login. Specifically, I changed
    session optional pam_mail.so dir=/var/spool/mail standard
    to
    session optional pam_mail.so dir=/var/spool/mail nopen

  • How do I update my plug-ins, as prompted?

    In installing Foxfire for the first time, I was prompted to update my plug-ins. When I click on "update," I get a window asking if I want to save this file. I click to save, then I get the original screen with the same plug-in and others still listed as needing to be updated. I seem to be going in circles here. What am I missing?

    Some plugins may automatically update, but often the file you download will need to be saved then run (find it then double click, or rightclick and run) or if it is an .XPI filetype opened with firefox before the update takes place.
    You may need to disable security software, and use an XP admin account rather than a limited user account.
    Have a look at
    * https://www.mozilla.org/en-US/plugincheck/
    You should be able to update your plugins by visiting the above linked page.
    The page should have instructions and links to other instructions.
    <s>(Right now the page could be faulty and be showing instructions for more then one Firefox version or operating System)</s> <sub>'''edit''' think it is just my memory that is faulty</sub>

Maybe you are looking for