How to Disable integrated audio interface?

Can I disable(if possible) my 'integrated audio interface' in PowerMac G5 ?
thx in advance
PowerMac G5 DualCore 2.0Ghz Mac OS X (10.4.5)

That's some piece of kit!
http://www.motu.com/products/motuaudio/828
If you want to shut off the puny internal speaker, leaving a jackplug in the rear analogue audio out socket, or the front headphone socket should do it. This works on a pre-dual-core G5, anyway.
If this isn't what you meant, you could try to explain why you need to disable the 'integrated audio'. Presumably you are not recording on the G5, just using the CueMix Console™ software...

Similar Messages

How to reconfigure my audio interface

Hi someone can tell me how to reconfigure my audio interface? is a motu 828 MKII Maverick 10.9.1 system I am thank you very much am using logic pro X

Do a factory reset!
to reset the 828:
Turn the computer off
- Unplug the firewire
- press the button "setup", turn full
- right until "factory default"
- push select
- confirm with "value"
Turn the computer on, let it settle.
- plug back firewire

How to disable the audio track in QT Pro Movie Recording

I have a device that allows me to record DVI video (1900x1200 uncompressed) into QuickTime Pro through the Movie Recording function. It all works very well except I am trying to record video only (it's the video output of a medical device, so there is no sound). In QT pro preferences, the choices for audio input are "automatic", built-in microphone", or "line-in". I need the choice of "none" (at these files sizes I need all of the CPU's resources working on the video to improve continuity and frame rate). Does anyone know of a script to disable the audio recording portion, or how I might write one? I have never written script before, but that won't stop me from trying to learn how (or rather, launching into a prolonged period of trial and error).
I am also going to approach this by nagging the video device manufacturer, but they are more Windows- centric (they do support Mac OS X and some Linux platform so all hope is not lost). However, it would be easier if I could have more control over my own destiny, and Mac folk seem to be much more helpful.
Thanks in advance to anyone who may be able to help.

First, thanks for the quick reply.
Setting the audio option to line-in with nothing plugged in yields the same results. The device (which is essentially a continuous frame grabber) doesn't have any audio feed at all, and I think that is what is confusing QuickTime. The file I record generates one video track and several sequential audio tracks that start at roughly every 4 seconds. The movie info say that these are Big Endian Stereo L&R tracks, and that have virtually no file size to speak of. Audibly there is nothing. However, the constant "start over" with the audio is causing 2-3 second skips in the video. When the video is recording contiguously, the frame rates are on the order of 15 to 20 fps, which at 1900x1200 is fantastic for what I am doing (software training video of a Linux-based medical device; nothing cool like Snapz available for this beast).
By the way, I have tried Hack TV Carbon, hTV 0.2 and QT Broadcaster, all which will recognize the device as an input source, but not choose it. These would let me deselect the audio input. As mentioned, I am prodding the device manufacturer for help, too, so maybe they will come up with something to address this.
The other thing is that this device creates a video stream that is transferred by USB2. If it was a Firewire device, I would be all over this with iMovie HD or a HD Video recorder, and just be done with it. Apple may have to come up with some universal driver to accept USB video in since they have dropped FW on some of the new models, but this frame grabber isn't on the list as of now.
No real solution I can find to convert USB to Firewire.
Anyway, I am hoping that somehow I could get into the QT script and just disable the audio recording, like the old "save as Un-editable" script would pullout the "save" function of the QuickTime action.
Of course, dumping the audio tracks after the fact doesn't fix the video; once it's chopped up coming in...
I suspect that the real answer to this issue lies with the frame grabber manufacturer. But, I am still hopeful that the QuickTime Script writers out there (or the Terminal folks) may have something up their sleeves.
Thanks for noticin' me.

How to disable beats audio?

hey how are you guys? im having a couple issues with the audio on my dv6t 6100 cto. everytime i go into the beats audio panel and disable beats audio and set the equalizer to flat (default), it makes the sound controls in windows sound go to -12 and -4. i reset them to flat, zero, and everytime i restart my laptop theyre back to -12 and -4, unless i reenable beats..
i do notice there are two audio drivers for my laptops model. one is the regular idt audio and the other is idt audio (hd). does the regular one exclude beats?
also the sound on my front left speaker shuts off at times, and only turns on if i turn it up loud or smack the laptop above the speaker. this has been happening since i first got the pc. anyone else have similar experiences? any way to fix this?
everything else (besides stupid switchable graphics and now these audio problems) about the laptop has been good to me. its fast and does the job well. its also sleek and not too heavy

let me rephrase my question.
if i have the beats equalizer disabled, everytime my computer starts up my tone controls (which are under windows, sound, right click on the "speakers and headphones" icon and go to properties, then tone controls tab) defualt to the negative values on every restart. how can i stop makng them default to their negative values? i want them both to stay at flat.
thanks so much

How to reinstall my audio interface?

Since I downloaded maverick I ended up needing to reinstall my audio interface and now I am unable to reinstall.

What do you mean?
The intergrated sound card of Macs is natively supported in Mavericks...
What Mac do you have?
Do you have an add-on sound card?

How will the usb audio interface will be working again

I have been using my G72-C55DX Notebook PC to record music suddenly it fails to record with usb audio interface and I have tried all efforts to fix the problem but it doesn't work.

Hi ketpiano!
I have an article here for you that may help you resolve this issue:
Macintosh: Solutions for noise in the audio signal
http://support.apple.com/kb/HT2743
Thanks for using the Apple Support Communities!
Cheers,
Braden

Lenovo K900 - how to disable Lenovo's interface?

Hi everyone!, first of all, I wanna thank you guys for the great help you give to us. My problem is: I just bought a Lenovo K900, and I read that it's possible to disable the Lenovo's interface (I would like to have just a simple native android) but I can't find where can I deactivate it. Please, could you help me? Couldn't find any answer on the world wide web.
Thanks in advance!

Hi!, thank you for your answer and no, I want to have an android OS without any interface of Lenovo (I'm trying my best english). I don't like Lenovo's personalization of android, and I read on a blog that its possible to disable it and just have a "pure" android. Is that correct? How can I do that?
Thanks again!

How to disable iNTEGRATED graphics On the Y40? in bios

i want to fully disable the integrated graphics through bios. in the switchable graphics and uma, either use both or integrated basicly. how do i change it so its dedicated instead of integrated?

Good luck, but i dont recommend third party softwares to control the hardware of a laptop (especially the ones that have no reviews)
Chrome should work fine on an integrated chip, heck I could play games on the integrated chip back in 2006. I think your issue may be loss of performance in Battery mode.

How to disable one Audio port on MSI MB with Realtek HD Audio

Hello MIS gurus.
I have MSI p45t-c51 MBoard with ALC889 Audio chipset. On this board i installed Win XP Pro with Realtek HD Audio Driver 5.10.0.6101.
On back audio plate i use Edifier 2.1 audio over one of the audio port's and HeadPhones over another one.
My question is: Is it possible to disable one of the ports so the sound only come from 1 of the audio devices instead of both.
At this moment, what i do is in the Realtek HD Audio Manager, i set LINE IN for the device i do not want to hear. - Advice if that is bad for the device that is plugged in at that port!
Thanks to all.
Regards.

Just disable the Onboard Audio from BIOS.

Logic Pro X - How do I record my voice over existing tracks (via a mike and audio interface) without hearing those tracks on the speaker. I have headphones plugged into the interface but it doesn't stop in coming out of the speakers?

I'm new to Logic Pro X and can't work out how to record my voice over existing tracks without them playing over the speaker. I'm using a Sure mike through an audio interface and have headphones plugged into the interface?

Hi Kevin, what kind of audio interface do you have?

I recently bought a dbx hardware compressor and am not quite sure how to use it in logic express 9. I hav a focusrite saffire 6 usb audio interface and am not dont how to use it in logic. Please help???

I recently bought a dbx hardware compressor and am not quite sure how to use it in logic express 9. I hav a focusrite saffire 6 usb audio interface and am not dont how to use it in logic. Please help???

MUYconfundido wrote:
Pancenter,
Thanks for the response, but I do not have a midi interface. I am using a midi to usb connector cable, thus bypassing the need for a Midi interface.
The Mac reads the USB cable as a midi device, but not the keyboard that I am trying to use as a controller. I have tried it with my korg sp 300 and with my Nord Electro 2.
Thoughts?
Thanks,
Tristan
Tristan...
This is what you have, correct?
http://www.alesis.com/usbmidicable
This from Alesis..
"The AudioLink Series USB cable receives and outputs MIDI signal thanks to its internal interface. The USB-MIDI Cable connects plug-and-play to your Mac or PC for an all-in-one USB-MIDI solution."
Notice, -internal interface-. What you have is a simple USB MIDI Interface. Most MIDI interfaces are USB.
My point is (was), MIDI OUT of the Korg goes to the connector marked MIDI IN on the Alesis, those new to MIDI often get this wrong.
pancenter-

How to disable the run-time popup menu in the sequence display on TestStand Operator Interface, that allow the use to skip the test?

How to disable the run-time popup menu in the sequence display on TestStand Operator Interface, that allow the use to skip the test?

Hello,
Regarding the skip/force pass/force fail options, when I set the ControlExecFlow to True in Teststand 3.1 and 3.5, in the Sequence Editor the menu options for skip/force pass/force fail are not active for Technician but, when I launch the Operator Interface logged with Technician the options are active. The problem is that if the technician sets one step to one of these options, and change the user to Operator, the test step remains skip/force pass.
Is there any possibility without modifying the Operator Interface (at programming level), to reload default values of the steps when changing the user to Operator?
Thank you,
Best regards,
paio

How to disable the select options button, while audio is playing in the question template in captivate 8?

How to disable the select options button, while audio is playing in the question template in captivate 8?

Apologies for late reply.
I mean "On Question screens audio keeps on playing even after we have selected an option or options depending on the question type and clicked Submit. How do we stop the audio on selecting an option?"

How to set your playback in Premiere Pro CS5.5 with Tascum 144 Audio Interface?

I have an Audio Interface Tascum 144 and i want Premiere Pro CS5.5 to Play it from my tascum, except my computer speakers how can i change this setting?

Go into the PPRO Preferences under Audio... In there select the TASCAM interface...

Audio Interface Problems -- How to make it simply work

Hello all. I recently bought a Tascam US-122L audio interface and cant seem to get it to work. It plugs in through the USB on my Macbook and lights come on so I know it is powered up and connected, and the warning comes up that an audio device has been located. I even get a signal on the screen from my track when I strum the guitar, but I cant figure out how to get the output to come out through the speakers so I can hear while I play. I'm also new to Logic and really dont know how to work it so I'm even more lost than when I tried to get it to work through garageband which was eventually successful. What settings should I change so that the recording comes from my interface and I can hear what I play through the speakers? Also any help on setting up a good modern rock distortion sound with presets would be most appreciated. Thanks!

Ah
I think it is actually an Apple App switcher thing.
So if the finder window does noy cover the After Effects Project window, it works, but if you have to use the app switcher, sometimes it works and sometimes it doesn't.
I don't think it is a file type issue, so much as a live application issue, or maybe GPU related.
It's a weird thing, not that important, but it does limit where you can and can't drag from.
Tris

How to Disable integrated audio interface?

Similar Messages

Maybe you are looking for