How to disable iNTEGRATED graphics On the Y40? in bios

i want to fully disable the integrated graphics through bios. in the switchable graphics and uma, either use both or integrated basicly. how do i change it so its dedicated instead of integrated? 

Good luck, but i dont recommend third party softwares to control the hardware of a laptop (especially the ones that have no reviews)
Chrome should work fine on an integrated chip, heck I could play games on the integrated chip back in 2006. I think your issue may be loss of performance in Battery mode.

Similar Messages

  • Z77a g43 | i5 2500k | Disable integrated graphics

    As the title states how do I disable integrated graphics from the bios on my z77a g43 motherboard running a 2500k. Finally got a dedicated video card Radeon HD 7870 

    Don't want it warming up the CPU (Overclocker a few degrees can make a difference ) and to get optimal performance out of my Radeon 7870.
    And yeah the Radeon is already up and running.
    So I'm guessing there's no way of completely disabling it from bios?

  • How do you turn off the integrated graphics on the msi k8mm-v motherboard?

    i recently bought a 3d fusion nvidia 6200 video card(agp) and it will not let me install it, untill i turn off the integrated graphics on the motherboard.
    any suggestions
    Thanks,
    Daniel

    MSI K8mm-v motherboard
    VT8237R chipset
    AMD Athlon 2800+ processor, at 1.60 ghz
    512 MB RAM
    3DFuzion Nvidia 6200 Video Card
    maxator 11.9gb hard drive
    dvd rom drive
    raidmax 12v  380 W PSU
    3.3v(26a)  5v(29a) 12v(11a)

  • How to print Integrity sql in the preparedstatement?

    How to print Integrity sql in the preparedstatement?
    Connection conn = null;
    String sql = "select * from person where name=?";
    PreparedStatement ps = conn.prepareStatement(sql);
    ps.setObject(1, "robin");
    ps.executeQuery();
    i'm wants print Integrity sql.
    For example:select * from person where name='robin'
    How should I do?
    thanks a lot!

    PreparedStatement doesn't offer methods for that. You can write your own implementation of PreparedStatement which wraps the originating PreparedStatement and saves the set* values and writes it to the toString().
    If needed, myself I just print the sql as well as the values-being-set to the debug statement.Logger.debug(query + " " + values);

  • How to disable delete option in the receipt work bench thorugh formpersonal

    Hi Team,
    Please let me know, how to disable delete option in the receipt work bench through form personalization

    Hi.
    Condition
    Trigger Event: WHEN-NEW-ITEM-INSTANCE
    Trigger Object: RGW_FOLDER.M_PAYMENT_METHOD_DSP
    Actions
    Type: Property
    Object Type: Block
    Target Object: RGW_FOLDER
    Property Name: DELETE_ALLOWED
    Value: FALSE
    Note: The button will remain visible and if the user presses it, the system will ask if he/she want to delete the receipt. However, if the OK button is pressed the receipt will not be deleted and a message will be shown ("You cannot cannot delete this record")
    Hope this helps.
    Octavio

  • How to disable maximize button of the java.awt.Window ????

    How to disable maximize button of the java.awt.Window !!!!
    Help needed

    How to spam the forum with the same fuqin question. Please get lost.

  • How to start Integration server with the user XISUPER

    Hi,
    How to start Integration server with the user XISUPER?
    Regards,

    Mahesh,
    In the post installation document, under Creating User XISUPER,
    I see the following,
    1.You must now log on to the Integration server host with the user XISUPER, to switch the initial password to a valid password.
    2.You must restart the J2EE engine to transfer the user creation to the J2EE immediately.
    I am unable to proceed here.Can you please help me to resume the post installation steps ?
    Thanks,

  • How to disable 2nd graphic card?

    I have a laptop Sony VGN-Z21XN/B with two graphic cards:
    1) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
    2) 01:00.0 VGA compatible controller: nVidia Corporation G98 [GeForce 9300M GS] (rev a1)
    Unfortunately both are running at the same time so my laptop is hot, noisy and the battery is discharged very soon. Is there any possibility how to permanently disable nVidia graphic card somewhere in system? I already tried disable nVidia modules in rc.conf, but without result and google doesn't help
    Thank for advice.

    I've just checked my bios settings and there is no option to set or disable graphic card. Bios is actually very poor.
    The problem is that sony provides only windows (vista and 7, not XP) software switch so there is no HW support for switching... I am looking for something like disable hardware in windows device manager. Simply tell arch: don't use that stupid piece of crap...
    However I'll have a look to site that you posted
    Last edited by Weri (2011-02-02 19:52:50)

  • Disable integrated graphics on Lenovo C200 AIO?

    Hi, is there any way to disable / turn off integrated graphics (intel gma) and use only nvidia ion on my Lenovo C200 AIO? I know that some notebooks have this function in bios, but i can't find anything here. Thanks a lot for reply.

    hey halfman,
    welcome to the forums.
    as i do not have this particular unit with me, i can't say for certain but usually this feature is to be done via the BIOS.
    check your bios and see if it is at version : 14 .
    http://consumersupport.lenovo.com/us/en/DriversDownloads/drivers_list.aspx?CategoryID=530788
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    Have you checked out the Community Knowledgebase yet?!
    How to send a private message? --> Check out this article.

  • Disable integrated graphics on HP Envy dv6-7200ea

    Hello. My laptop comes with two graphics. The intel hd 4000, and the nvidia geforce gt630m. I have searched for an option in the BIOS to disable the integrated graphics (intel hd 4000) with no success. I've set the global settings in the nvidia control panel to use the nvidia graphics card, but never-the-less, programs like PC Benchmark, emulators, games, editing software all use the intel graphics card. All intel and nvidia drivers are up to date. Any help on this matter?
    -Choco

    Hi @ChocoMocoHD ,
    Welcome to the HP Forums!
    It is a terrific place to find answers.
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    I understand that you do not see an option in the bios to disable the integrated graphics.  This is not always an available option.  Sometimes a bios update will provide that option.  You can check the driver and software page for you notebook to check for a bios update or you can run HP Support Assistant  to help locate and resolve issues.
    Updating the BIOS. 
    A  bios update does have the potential to cause damage, so you may wish to consider contacting HP support for assistance with that process.
    Please call our technical support at 800-474-6836. If you live outside of the US/Canada Region, please click the link below to get the support number for your region. Phone Assist Worldwide
    Here is a link to Switchable Graphics on Notebooks Configured with Intel and ATI GPUs to assist you should that option become available.
    Good Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • GX70 Disable integrated graphics?

    Did some googling for ways to disable the 8650 on board graphics and some sources pointed towards BIOS, I had a look around in there and didn't see any such option.
    Is there a way to turn off integrated graphics, I use my laptop plugged in 99% of the time so power consumption isn't an issue. I am applying for a beta and they want my dxdiag uploaded, would rather my dxidiag show my dedicated graphics however it is showing the integrated one instead.
    Any solutions I am missing?
    Thanks in advance.

    Quote from: Terranos on 11-December-14, 06:11:06
    Ok, thanks.
    Is there a way to confirm which graphics is being used by which application?
    I know you can configure switchable graphics, but is there any way to confirm that the didicated GPU is being used by a game?
    you can see it by power button if it's blue then it's using intel one if it's orange it's using nvidia one blue can be white as well depending on laptop.

  • Disabling integrated graphic

    hi,
    i have a problem installing an ASUS Geforce4 Ti 4200 AGP card into MSI K7N2G-L board, as my pc refused to boot with AGP card onboard. Is there any way of disabling the integrated graphics, as I did't find the option in bios.
    many thanks
    pc 2700 ddr ram
    liteon 16 x dvd rom
    40 G ibm hdd
    athlon 2000+
    razi

    hi
    to disable onboard gfx just install an agp card.
    it is possible you did something wrong during the installation like not insert the agp card correctly or a cable got loose during the install or it could also be a hardware failure.
    can you post the poweroutput on the .3v 5v and 12v rails on the psu.
    check for loose cables.
    uninstall ALL gfx drivers before you change gfx card.
    bye

  • HOW TO DISABLE "SAVE AS" IN THE MENU?

    Does any body knows how to disable the option SAVE AS from the file menu en discoverer 4.1.37?
    Thanks for your help!!

    You can use the UISelectitem#setItemDisabled method to set the item disabled status.

  • How to disable Interact option in the exported PowerView report?

    Hi
    When I export a PowerView report (from SharePoint) as PowerPoint, it gives option to 'Interact'. However the customer does not want to have interaction in the PowerPoint. They just want to save the slides as images. How do we disable this 'Interact' option
    in the PowerPoint file which is exported from the PowerView report?
    It also prompt for user credentials while opening the report in PowerPoint. How to avoid this and view the slides just as images?

    Hi.
    Condition
    Trigger Event: WHEN-NEW-ITEM-INSTANCE
    Trigger Object: RGW_FOLDER.M_PAYMENT_METHOD_DSP
    Actions
    Type: Property
    Object Type: Block
    Target Object: RGW_FOLDER
    Property Name: DELETE_ALLOWED
    Value: FALSE
    Note: The button will remain visible and if the user presses it, the system will ask if he/she want to delete the receipt. However, if the OK button is pressed the receipt will not be deleted and a message will be shown ("You cannot cannot delete this record")
    Hope this helps.
    Octavio

  • How to disable perticluar cell of the table on the screen,at run time?

    HI All,
    I am using table control on the screen.
    I have 5 field in the table control.
    out of which one is posnr.
    Now, if user doesnt enters the value of posnr then it should be created automatically.
    I have written the code for that ,but this perticlar cell (for which posnr is generated automatically ) should be disabled now.
    Can anybody tell me how can i do it?
    Thnx in advance.

    Hello Sanjay,
      Write a module inside the loop...endloop in the PBO of your screen. Inside the module, check the field and disable it by modifying the SCREEN table.
    loop at itab with control tctrl.
      module modify screen.
    endloop.
    module modify_screen output.
      loop at screen.
       if screen-name cs 'POSNR'.
       if itab-posnr is not initial.
         screen-input = 0.
       else.
         screen-input = 1.
       endif.
       modify screen.
       endif.
      endloop.
    endmodule.
    Regards,
    Manoj

Maybe you are looking for

  • Mview refresh and ORA-12008 error

    I am getting the following when I try to refresh a materialized view. This error occurs the first time I try to refresh, then if I try again, the refresh is successful. Most of what I have been able to glean about this error is that it is related to

  • Working with Local Files

    I have to develop a Web-Based application to run on each client's pc. Or, it could be to run on our intranet. This is for internal use only. The requirements are very simple: 1. Web-Based 2. Able to access local client's files 3. Able to upload files

  • Java won't open.

    It had disappeared. I retrieved it through Time Machine. Now it won't open. What to do???

  • Receiving a "missing ; before statement" error message

    I cannot see what I'm missing on this one.  This is an Adobe form testing a checkbox (New) and if it has been checked it is required that at least one of the following checkboxes (A or B) is checked. If not, an error is to display on the form to the

  • [SOLVED] No sound in 32-bit OpenAL

    Hallo everyone. Firstly, I am new to Arch, but I've been using Linux for more than ten years. I must say, I love Arch! It's like a traditional-style distribution (no hidden options, no "you don't know what's best for you, I do!", no stupid flavours e