How to disable Internet from running when users first boots into Windows 8.1 Pro

Recently added Windows 8 into our environment, everything works fine except the IE 11 always pops up at initial logging. Is there a way to disable this w/ Group Policy?
Thanks in advance.
Roget Luo

Hi,
Did you mean that once users first log on Windows 8.1 and IE 11 pops up? Did this issue happened after logging off then logging in and shutting down the PC then restarting to login?
What’s the detailed information about the pop-up? The screenshot would be more helpful for us to determine the issue.
We can check if there is any logon script or task schedule configured in your environment.
For further help you, please provide more information about how you deploy Windows 8.1.
Meanwhile, please help to collect the boot trace for further research.
How to collect a good boot trace on Windows 7
http://blogs.technet.com/b/jeff_stokes/archive/2012/09/17/how-to-collect-a-good-boot-trace-on-windows-7.aspx
Once down, please upload the .etl file into SkyDrive or Similar ones and share the public link here for our research.
Look forward to your response.
Kate Li
TechNet Community Support

Similar Messages

How do I access the music from my Mac drive while booted into Windows?

How do I access the music from my Mac drive while booted into Windows via Bootcamp? I tried using MacDrive but it's not supported for Vista 64-bit edition. Is there another program out there that I can use? I just want to be able to access my music that's on Leopard while in Vista. Any advice will be much appreciated. Thanks in advance.

Your best bet is to move the music on the Windows side since Leopard will be able to read and play the music from the mounted Windows drive (Leopard will not be able write anything to the Windows NTFS partition).
In your case it won't work the other way around.
Axel F.

Black screen when trying to boot into Windows 7

Hello everyone.
Today we've encountered an issue with one of our MacBook Pros with Windows 7 installed. The computer was booted into Windows 7 (it's strictly used as a Windows machine by this particular user) and after a time of inactivity it went to sleep. It wouldn't wake up from it's sleep so we tried a hard boot. At that point we would get the grey screen, the Apple tone wouldn't sound off and it would just go to a black screen (by default we have it booting to windows). So then we reset the PRAM. Now, we get the apple tone and we can boot into the Mac side. But when we try and boot into Windows, we get a blank screen.
What's even more interesting, if I try and boot into a Windows install disk to do a boot repair, it gives me a black screen. If I even try to boot from a live Linux cd, I get a blank screen! When important thing I then noticed was that the cd spinned for a couple minutes, then stopped. So I began to wonder if it was still loading the OS like expected, but just wasn't displaying it.
So I booted into Windows, got the blank black screen. Then I went into another computer, fired up remote desktop and voila! I'm in the machine!
So the problem is this: When booting into ANYTHING other than OS X, the display turns off.
What can we do?

Hello there,
I have a similar problem! Windows 7 shutdown unexpectedly and since that I can not reboot in windows anymore only with safe mode where everything is a mess.
Also when it's trying to reboot in windows a blue window appears,says something about drivers and it is counting something (79.78...till100)but I m not able to read it cause it disappears immidiately and then black screen and then it turns to reboot in mac which works fine.
I m sorry if I confused you with my english...
If anyone knows please help!
Thanks

Is it possible to bypass the number of partitions limitation (no more than 2) when trying to boot into windows by not using boot camp assistant, and instead just partitioning the drive manually?

I can't find a specific answer to this question.
I did have a functioning Windows 8 installation on my MacBook Pro previously. I tried to make a third exFAT partition so as to have a drive mutually readable/writable to both operating systems. This made it so I could no longer boot into my Windows installation.
I know I'll need the boot camp drivers installed on the Windows installation after the fact, but would manually creating a partition and installing the OS without Boot Camp Assistant work? And would I be able to boot from it while having a total of 3 partitions?

That's the spirit!
Just be sure to have your OS X junk safe in a tested backup, in case the whole thing craps out and you end up having to do a low-level partition and erase of the entire drive.
And like I said, the problem is not OS X. I've set up mine at least once with 4 partitions holding as many flavors of OS X as can run on the hardware, all perfectly bootable on demand.

How to disable internet from user account

I need to disable an employees access to the internet, without pulling the actual cable, since others will have to administer updates etc. Just switching them to standard setting seems to still allow them access. Is there anyway to do this?

I need to disable an employees access to the internet, without pulling the actual cable, since others will have to administer updates etc. Just switching them to standard setting seems to still allow them access. Is there anyway to do this?

How to print pdf from mac when printer is connected to windows pc which in turn connected to same wifi as my mac?

I have HP deskjet F4400 printer which is always connected to my PC with win 7 on it. And the PC is connected to same wifi as my mba. How can I print a pdf over the network? Because always taking my mba near the printer and connecting it and then printing is a time killer....
I am using MBA 2014 with Yosemite and a PC with win 7.

My strong recommendation is to connect the 2510 via ethernet to your router. It is the most straightforward way to have it accessible to the entire network.
Also, when you upgraded your network from g to n, did you put it in backwards-compatible mode (in other words, works with both g and n devices)? I also strongly recommend that.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How to disable registration screen for all users

Hi, can someone advice how I can disable the registration screen when user first startup Acrobat? I am using Acrobat 9
Thanks

I don't know if you can. Try this.
Make a copy of the registry.
Make a new copy of the registry after registering.
Try to find the difference in the files after comparing registries. Then change the registry for all future installations.

I have a macbook pro with OSX 10.9.3 and Safari 7.0.4. How do I remove BING FROM SEARCHING when i type something into the search bar

I have a macbook pro with OSX 10.9.3 and Safari 7.0.4. How do I remove BING FROM SEARCHING when i type something into the search bar

See below if the search engine setting was changed without your knowledge and you can't change it back.
You installed the "Genieo/InstallMac" rootkit. The product is a fraud, and the developer knowingly distributes an uninstaller that doesn't work. I suggest the tedious procedure below to disable Genieo. This procedure may leave a few small files behind, but it will permanently deactivate the rootkit (as long as you never reinstall it.)
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data. You must know how to restore from a backup even if the system becomes unbootable. If you don't know how to do that, or if you don't have any backups, stop here and ask for guidance.
Step 1
In the Applications folder, there may (or may not) be an application named "Genieo". Genieo may be partially installed even if this item is absent. If it's present, select it and open the Finder Info window. If it shows that theVersion is less than 2.0, download and install the current version from the genieo.com website. This may seem paradoxical, since the goal is to remove it, but you'll be saving yourself some trouble as well as the risk of putting the system in an unusable state.
There should be another application in the same folder named "Uninstall Genieo". After updating Genieo, if necessary, launch "Uninstall Genieo" and follow the prompts to remove the "newspaper-style home page." Restart the computer.
This step does not completely inactivate Genieo.
Step 2
Don't take this step unless you completed Step 1, including the restart, without any error messages. If you didn't find the Genieo application, or if you couldn't complete Step 1 for any reason, stop here and ask for instructions.
Triple-click anywhere in the line below on this page to select it:
/Library/Frameworks/GenieoExtra.framework
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.
If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder should open with an item named "GenieoExtra.framework" selected. Move that item to the Trash. You'll be prompted for your administrator password.
Move each of these items to the Trash in the same way:
/Library/LaunchAgents/com.genieo.completer.update.plist
/Library/LaunchAgents/com.genieo.engine.plist
/Library/LaunchAgents/com.genieoinnovation.macextension.plist
/Library/LaunchDaemons/com.genieoinnovation.macextension.client.plist
/Library/PrivilegedHelperTools/com.genieoinnovation.macextension.client
/usr/lib/libgenkit.dylib/usr/lib/libgenkitsa.dylib
/usr/lib/libimckit.dylib
/usr/lib/libimckitsa.dylib~/Library/Application Support/com.genieoinnovation.Installer~/Library/LaunchAgents/com.genieo.completer.download.plist
~/Library/LaunchAgents/com.genieo.completer.update.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those listed above, move them as well. There's no need to restart after each one. Some of these items will be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
Restart and empty the Trash. Don't try to empty the Trash until you have restarted.
Step 3
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including ones called "Genieo" or "Omnibar," and any that have the word "Spigot" or "InstallMac" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Your web browser(s) should now be working, and you should be able to reset the home page and search engine. If not, stop here and post your results.
Make sure you don't repeat the mistake that led you to install this software. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad has a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If youever download a file that isn't obviously what you expected, delete it immediately.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Genieo developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
Finally, be forewarned that when Genieo is mentioned on this site, the perpetrator of the scam sometimes shows up under the name "Genieo support." He will tell you to run the provided uninstaller. As he knows and intends, the uninstaller does not completely remove the malware.

How can we enable tick icon when user click any button

how can we enable tick icon when user click any button in captivate 6@

hi first of all thanks for imitate action.
actually i want to make a menu (TOC) with tick icons, on starting all ticks are disabled but when i click on any button from my menu i want to enable tick for that particular button so that user can know easily the visited button.

Is it possible to disable some popups from FEP Client on the desktop. But how to disable popups from real time protection

Is it possible to disable some popups from FEP Client on the desktop. But how to disable popups from real time protection. This is so that end users who are non technical are not disturbed and only the I.T is aware of the viruses in teh environment.Shahid Roofi

You could set policies which when a malware detected an action perform automatically without user interaction but there is no GPO which stop the notification, one reason could be that when notification keep appearing, then user will know something is wrong
otherwise why FEP should display any warning.

How to maintain budget in 2006 when user in 2008 & vice versa? frame 1 y

Problem:
User could not save changes in original budget in 2006 & in 2008 also.
Description
When user tried to change original budget (FR04) in 2006 year,
then getting a Message on screen
Payment for yearly budget 2008 samller than distrubuted budget
with fund center commitment item list &
Payment for the annual budget 2006 are less than annual release
with fund center commitment item list.
User add & release fund in specific fund center-commitment item which was showing in error list.
After the check-
then getting error Payment for yearly budget 2008 samller than distrubuted budget
with fund center commitment item list
Time frame only shown 2006.
Here how to maintain budget in 2008 when user in 2006?
In Next step
When user tried to change original budget (FR04) in 2008 year,
then getting a Message on screen
Payment for yearly budget 2008 samller than distrubuted budget
with fund center commitment item list &
Payment for the annual budget 2006 are less than annual release
with fund center commitment item list.
User add & release fund in specific fund center-commitment item which as showing in error list.
After the check-
then getting error
Payment for the annual budget 2006 are less than annual release
with fund center commitment item list
Time frame only shown 2007 2008 2009.
here how to maintain budget in 2006 when user in 2008?
Means user can only change budget in 2007 to 2009 when more years coming in timeframe.
Current year :2008
Closed year: 2006
In Fund Management, need change original budget payments in 2006 which is already closed.
Purpose:
Maintain the positive budget in fund center -Commitment item in 2006 & in 2008 which is shwoing in error.
Can we see past-current timeframe at the same time ?

1. copy the frames of your looping animation.
2. create a new movieclip and paste those copied frames onto
this movieclip's timeline
3. from your library drag a copy of the above movieclip to
frame 1 of your main timeline and attach a stop() to that frame.
4. place your login textfield and ok button on frame 1 of
your main timeline.
5. when ok is pressed (and login) passes some condition
direct your main timeline to frame 20.

How to disable the reminding dialog when close the webi report viewer

Dear all
How to disable the reminding dialog when close the webi report viewer
Background
When user close the webi report viewer in inforview by click the button in the right-top of the webi report viewer frame. It always prompt a dialog to remind user that the modification will be lost without saving.
But customer need to disable this dialog, and can clost the report viewer directly.
So is there any ways to modify this?
I think it shoule modify some .js file under tomcat, but can not find the solution.
Thanks a lot, any information woulde be appreciated.
David Zhang

I've had the same issue bugging me since installing Snow, er, lion, er, cat, er, cougar, er, Mountain Lion. Incredibly ANNOYING.
It's stupid stuff like this and reverse scrolling that really turn long-timer users off. I'm personally glad Forstall got fired for blunders such as these.
I'm serious peeved that turning off iCloud Documents & Data actually deletes documents and data locally. That's just incredibly stupid.
MANY thanks mende1 for the answer on how to fix it.

How connect to internet from domain created in Hyper-V

How connect to internet from domain created in Hyper-V
Host = Win8 Pro
Connection to internet done using WI-FI
Internet seeting
Home router with secury connection -> cable internet
Network name set on router = "Mtl2014"
Host setting
TCP/IPv4 Seeting for WI-FI ,connected to "Mtl2014"
Obtain address automaticly
Obtain DNS server address automaticly
I can connect and browse internet from host
In Hyper-V
1.created 2 private virtual switches SW1 and SW2
2.installed 2 VM HA1 and DC with Win2012 server eval edition
3.assigned stations HA1 and DC to virtual switch SW1
on Host
WI-FI network connection
Sharing->Allow other network to connect.. ->Home network connection vEnthernet (SW1)
in Hyper-V
choose Activate windows on HA1 and DC
open browser on HA1 and DC ,
At this point I am able to see and browse and search in google from HA1 and DC
In Hyper-V
assined virtual switch SW2 to DC and HA1
created Domain controler on DC and domain Alex1.com
TCP/IPv4 Seeting on DC
IP = 192.165.1.8
subnet = 255.255.255.0
default getaway = empty
Prefered DNS server = 192.165.1.8
TCP/IPv4 Seeting on HA1
IP = 192.165.1.11
subnet = 255.255.255.0
default getaway = 192.165.1.8
Prefered DNS server = 192.165.1.8
added HA1 to domain Alex1.com
Question
What seeting on SW2, DC, HA1 and Wi-FI should I change in order to have access to internet from Alex1\DC and Alex1\HA1?
I was planning to use internet to download/install pacthes/updates for windows and sql servers located on Alex1\
I plan to build 6 more Win 2012 server eval and join then to Alex1\
Thank you
Alex

I see.
1. 192.168.0.0 addresses are not routable across the public Internet. Even if the whole world knows you're using that space, the information is useless. But if you feel better hiding it, OK.
2. Internal doesn't allow communications with a physical network either. Only the external type does.
3/4. Your problem is not really with Hyper-V. It's with IP.
Your machines are all able to communicate with each other because they're on the same switch and the same subnet. No gateway is required. If you have a computer with an IP of 192.168.1.8 and its subnet mask is 255.255.255.0, then it will be able to communicate
with any computer on the same switch with an IP of 192.168.1.anything. It's when they need to talk to computers off of that subnet (anything that doesn't fit the 255.255.255 mask) that they have a problem. For that, you need a gateway somewhere. You can't
use "DC" for the gateway because it's not performing routing services.
You have two choices.
One is to use an external switch so that your guests are directly connected into your physical network. That will take over your WiFi adapter, so you'll probably want to set the share option so your Win8.1 box continues to function. Then just use a common
IP subnet with everything else on your home network.
The second is to set up a software router. If you are using an internal virtual switch, then this has to be in the Win8 environment. I might be mistaken, but I think that
Internet Connection Sharing would even work for this. If you are using an internal virtual switch, then your Win8 system should see two (or more) adapters. One of them is the physical adapter (we'll call it wNetAdapter) and one would be the virtual adapter
(we'll call it vNetAdapter) it uses on the virtual switch. Once you set up ICS, you would have all of your VMs use the IP address that you assigned to vNetAdapter as their gateway.
Eric Siron Altaro Hyper-V Blog
I am an independent blog contributor, not an Altaro employee. I am solely responsible for the content of my posts.
"Every relationship you have is in worse shape than you think."

How to disable erase from find my phone?

my ipad and mac was stolen. in Find my phone erase was enabled, when ipad was found as everything was erased, could not be located. i don't want that to happen with my (ex) Mac, how to disable erase from find my phone.
Thanks

Do not use Erase. Instead use Lost Device. However, if the items are automatically erased then you cannot locate them nor change the setting.

How to disable skype from background in lumia 920

how to disable skype from background in lumia 920. skype all time running in background and i can't disable it, everyone can send me messages and calls, and this feature is eat batery lifetime

Thats what is mentioned in my post ..
farby wrote:
Have installed Skype on my Nlokia Lumia 920 since a long time and on an average the battery lasts more than 2 days ..
BTW there is no way you can stop the application running in the Background ..(settings-->applications-->background tasks-->advanced ..and read the note at the top ..)

How to disable Internet from running when users first boots into Windows 8.1 Pro

Similar Messages

Maybe you are looking for