How to disable loud speaker beep during install
Is there a way to disable the the speaker beeping during install? Or at least lower its volume? Its extremely loud. Ive already removed the pcspkr module, but the beeping is still present.
(I reinstall arch often and this is why I'm asking )
echo "options snd-pcsp index=2" >> /etc/modprobe.d/modprobe.conf
Similar Messages
-
How to disable the probe() routine when install a pseudo driver
I developed a very simple pseudo driver which does not control any hardware device. I just want to learn dynamic load a driver through the SUN Autoconfiguration method. When I run add_drv mydriver, I got the following error message
devfsadm: driver failed to attach: xlpd
This is because the probe() routine try to look for some hardware but it can not find it. So the question is how to disable this probe() routine so that this pseudo driver can be installed.attach may fail also if you didn't provide a configuration file for your pseudo driver. Here is a sample for the xlpd pseudo driver:
<pre>
#ident "@(#)xlpd.conf 1.0 02/25/00"
name="xlpd" parent="pseudo";
</pre>
This file must be named xlpd.conf if your pseudo driver is named xlpd, and must be located in /usr/kernel/drv even if your pseudo driver is 64-bit. -
UE-V 2.1 - How to Enable WaitForSyncOnApplicationStart and WaitForSyncOnLogon during install
Good day everyone,
I can't seem to figure out how to enable the WaitForSyncOnApplicationStart and WaitForSyncOnLogon parameter during install. I tried to add WaitForSyncOnApplicationStart=true to my install command but it doesn't seem to work. There must be a way
to set those parameter automatically during install. Anybody has any idea? I am deploying it using the x64 .msi version.
Thank you all for your help!Anybody has an idea? Maybe someone from microsoft? While I apreciate suggestion that were made, using external mean to set those parameter is not really what I call a solution but more of a work around. On top of this, I downloaded the ADMX GPO template
for UE-V 2.1 and those 2 settings are not even part of it. -
How to disable site advisor can't install F Secure Security
F Secure Security will not install because Site Adviser is present - I have not installed McAfee Site Adviser but apparently it is a hidden extension / plug in of waterfox / firefox. need to remove this or will have to remove firefox
Some added toolbar and anti-virus add-ons are known to cause
Firefox issues. '''Disable All of them.'''
Type '''about:addons'''<Enter> in the address bar to open your Add-ons Manager.
Hot key; '''<Control>''(Mac:<Command>)''<Shift> A)'''
Select '''Extensions,''' locate the add-on. From here you can disable or
remove it. '''Plugins,''' however, can only be set to '''Never''' or '''Ask.'''
To remove it, you have to remove its program. -
How to disable the Bong sound during startup
any idea?
but I'm not prefer thirdparty tweak software.flymusic wrote:
any idea?
but I'm not prefer thirdparty tweak software.
Hi,
that limits the choices drastically
Best two solutions there are either StartupSound.prefpane of Psst, but both are additions to the System Preferences which could qualify them as 'tweaks'.
You might wanna try the 'Audio-Midi-Setup.app' from the Applications/Utilities folder and in the lower left click on the Mute-Button of the Master Volume.
But that will also mute all other sounds.
Regards
Stefan -
Nokia E71 - how to disable 'reminder' ?
does anybody know how to disable that annoying beeping sound that remembers you about unreaded sms or missed calls (not blinking d-pad light but sound) ?
Solved!
Go to Solution.thanks for reply. what a shame its my bad. i noticed that i have (remind me) program instaled and i didnt know that it is still working even it is not listed in background programs.
this threat can be closed
Message Edited by lefti696 on 04-Sep-2008 08:59 PM -
Loud speaker volume low in New Firmware N73M
Hi !i recently upgraded to 4.07 and found that loud speaker volume during a talk is too low.
Is there any option to increase it (other than pressing side + button). even at full volume it is too low than previous firm warego to options>audio settings>Loudness and turn it on. and if u think its not enough then u can go to options>equaliser>options>new preset>"name it" then turn all equalisers up then press back and activate that newly made equaliser.
- Is this a Signature? - -
How do I disable crash reporter during install?
I put this line "pref("datareporting.healthreport.uploadEnabled", false);" into the mozilla.cfg file to disable health reports. I'm looking to disable the crash reporter as well during install as default.
See also:
*https://developer.mozilla.org/en/Environment_variables_affecting_crash_reporting
*http://mike.kaply.com/2012/02/14/customizing-the-firefox-installer-on-windows-2012/ -
How to disable internet access during Adobe AIR installation
Hello,
I am trying to install Adobe AIR in an enterprise environment on numerous clients.
Unfortunately the installation procedure always tries to open an internet connection during installation.
As all users in our company require proxy authentification for internet access, the authentification dialog of our proxy always shows up when installing Adobe AIR. So the installation can not be processed without any user interaction.
We would like to install Adobe AIR silently in the backround. So we are looking for an opportunity to disable the internet access during AIR installation.
Thanks for any help,
AlexHi Alex,
You might want to give the Settings Manager a try (located at the bottom of this page.) However, I suspect the network might still be pinged regardless of this setting. Please let me know how it goes.
Thanks,
Chris -
How can I disable the behance pics during the startup of my CC 2014 programmes?
When I start my photoshop cc 2014 and illustrator and all other apps, there ware always some behance pics from users.
is there a way to disable them?
thanks a lot
alexhi sarah,
thanks for getting back to me.
i mean these images:
when the programmes are starting up…
thanks a lot for your help
alex
Am 08.01.2015 um 16:05 schrieb SarahBehance1 <[email protected]>:
How can I disable the behance pics during the startup of my CC 2014 programmes?
created by SarahBehance1 in Behance - View the full discussion
HI Alex - can you send a screenshot of what you're seeing? I'm not sure what you're referring to.
Talk to you soon, thanks!
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7077548#7077548 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7077548#7077548
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Behance by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.
Alex an der Haas
Art Direction
// Die Goldkinder
// Ausdenken und Machen.
// Mollardgasse 85A / Stiege 3 / Top 142, 1060 Wien
// Tel: +43 (0) 1 595.37.07
// Mob: +43 (0) 699.816.366.31
// http://www.diegoldkinder.at -
I've just purchased a new iMac and need to know how to disable my apps on my old system so that I can install them on the new one.
You are allowed to have two working installations so you do not have to disable the original if you prefer to have a backup. Otherwise, to disable you can just sign out thru the CC manager.
Creative Cloud Help / Sign out, Sign in | Creative Cloud desktop app
http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html -
what can i do, when i call someone with mit i-phone, i only hear the other person, when i press the loud-speaker button, does anyone know, how to solve this problem
Does hte iPhone say headphones when you adjust the volume, even when they aren't connected?
If it does, there might be some lint or something in the jack. Take a look at this Apple document -> iPhone: Can't hear through the receiver or speakers -
How to install XE and specify the SID (instead of XE) during install
I would like to use Oracle 10g Express Edition for development purposes but I already have an existing project that requires a specific SID.
I tried following some instructions on asktom.oracle.com on changing the SID but it was disastrous and did not work.
Ultimately I have to rip XE off and reinstall everything because it was so mucked up.
I would like to reinstall XE but during install specify the SID just like I can with Oracle 10g R2 Enterprise Edition.
Can someone please tell me how to do this, and Oracle if you are listening, can you modify XE so that the SID can be specified on install? This one thing is a deal breaker for me and am considering falling back and using postgresql for the initial release of this product instead of Oracle to clients. I am sure many of them would upgrade to Oracle Enterprise edition if I were able to release a product based on XE first.
thanks
OracleTekAt the time of installation , you can't change SID XE.
After installation, you can add another service name
Check following thread for more details
Re: How to create service on Oracle 10g XE
- Virag Sharma
http://virag.sharma.googlepages.com
http://viragsharma.blogspot.com -
how to resolve this problem. During ti install the new verson in my iPhone appear "The iPhone could not be restored. An unknown error occourred (1015)
You can't resolve the issue. Your phone is bricked.
This is the error message that happens when you try and update a jailbroken phone.
Discussion of jailbroken phones is prohibited by the Terms of Use of this forum.
You need to buy another phone. -
How to disable "install this web app on your phone" in safari
Does anyone know how to disable the annoying popup in Safari that asks me to install the web page on my home screen? I did and it continues to ask.
I don't think there's much you can do about that apart from maybe disabling all pop-ups in Settings-Safari
Maybe you are looking for
-
How do I delete an old email address from iCloud?
-
Recording from vinyl and normalizing?
Hey everyone, just signed up as I use this quite a bit and thought I'd firstly say thanks to everyone for putting that effort in and being helpfull. I have been recording my old vinyl collection (Old Skool Garage woo!) and have been normalizing the r
-
Wireless keyboard requires constant re-pairing
Hello Apple Community, My wireless keyboard requires Blutooth re-pairing with my 27" iMac everytime I start the iMac up. Very frustrating. Does anyone have any suggestions? Thanks, Qtheband
-
Hey, In case of multiple queues in BPM. say for instance multiple queues(random) When we check in SXI_MONITOR, in the QueueID column we get : XBPE_TaskId_No_QueueId. Please can you tell me what is the significance of "No"
-
Reuse of Context node field into another
Hi All, My Reuirement is to add "Product Configuration" field into Crdit Memo item List. Whereas this standard field already avaialble in standard order item list. But "Credit Memo Item list" Context node is different fro "Standard order item list" C