How to disable microphones and configure WLAN on Satellite A210-11b?

Hello
I have notebook with microphone and I dont know how to SHUT OFF him ... and if somebody want help me can u say how to configure WLAN in this notebook because I cant configure it properly.
At first please help me with this microphone in my notebook becuse I want put in output channel. Please help me. I cant speak on TEAM SPEAK 2.

Hi mate,
I suppose that you have Windows Vista installed. If thats right then go to Control Panel -> Hardware and Sound -> Recording -> choose either "FrontlineIn" or "Frontmic" (which is available in this moment) and dont forget to connect your headset before.
Regarding WLAN, you should check this article: http://helpdesk.uafortsmith.edu/Guides/VistaWirelessSetup
Greets

Similar Messages

How can i add and configure a new AIR-LAP1142N-E-K9 Access Point to a AIR-WLC4402-12-K9 WLAN controller

How can i add and configure a new AIR-LAP1142N-E-K9 Access Point to a AIR-WLC4402-12-K9 WLAN controller

Thanks alot, that helped me .....
what about option 43..i am using one wlc and the switch where wlac and APs are connected is playing the role of dhcp server used by APs as there is a dhcp pool configured. please advise. will the command be
option 43 hex (f104xxxxxxxxxxxx) f104 adding to it the management ip address of the wlac in hexadecimal.
if the ip address is 192.168.10.5 then the command will be
option 43 hex f104c0a80a05
please correct me if i am wrong!!!!

How to set up and configure AirPort Express for AirPlay and iTunes

Saw somewhere that supposedly there were some apple written guidlines on the above topic. I have searched all over for them. Anyone know where I can get a copy to read through. Just trying to educate myself a bit and sety up another room with access to itunes, radio, etc with high quality speakers and amp off my express.

Here you go ...
How to set up and configure AirPort Express for AirPlay and iTunes

SharePoint 2013 How to disable Drag and Drop Functionality

Hi,
In SharePoint 2013 in document library we have default behavior of drag and drop documents in document library. How to disable drag and drop documents in document library?

Hi,
As a work around, you can edit the Drag and Drop js as to remove the drag and drop functionality, edit the document library page (default
page) place the content editor web part on top of the library include the modified Drag and Drop js file in the content editor web part, Please save the Drag and Drop js file to other location (probably Site Assets library etc).
Hope it helps!!!
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. Thanks, Ajeet

How I can install and configure dg4odbc to access SQL Server database

I need to link Oracle database (installed in Solaris) to SQL Server database. How can I install and configure dg4odbc. Is there any step by step tutorial or guide available there.Thanks in advance.

Hi,
You can download the DG4ODBC software from either MOS or eDelivery depending which versios you want to install
For 11.2.0.4 -
Patch 13390677: 11.2.0.4.0 PATCH SET FOR ORACLE DATABASE SERVER
- login to My Oracle Support
- click on 'Patches and Updates'
- search for patch number 13390677
- you may need to press the '+' button to see the platform list
- scroll down the list to and click on the 'Oracle Solaris on SPARC (64-bit)' option.
- on the next screen click on the 'Download' option
- from the list of download files choose -
p13390677_112040_platform_5of7.zip
- this is the Gateway media pack and has everything needed for a standalone gateway install.
- unzip the file and run the installer and choose the gateway you want.
For 12.1 -
https://edelivery.oracle.com
Product Pack – Oracle Database
Platform – Oracle Solaris on SPARC (64-bit)
Oracle Database 12c Release 1 (12.1.0.1.0) Media Pack for Oracle Solaris on SPARC (64-bit)
- then for the gateways download –
Oracle Database Gateways 12c Release 1 (12.1.0.1.0) for Oracle Solaris on SPARC (64-bit)
- unzip and run the installer
Whichever version you decide I recommend you install into a completely separtae ORACLE_HOME from any existing installs as this makes maintenacne easier.
For the configuration have a look at this note if you have access to My oracle Support -
How to Configure DG4ODBC on 64bit Unix OS (Linux, Solaris, AIX, HP-UX Itanium) to Connect to Non-Oracle Databases Post Install (Doc ID 561033.1)
If not, then refer to the documentation available from -
Oracle Database Help Center
- choose either 12.1 or 11.2 then the 'Information Integration' option.
You can also install the DG4ODBC on the Windows machine (or any other machine if preferred) and access it from the RDBMS on Solaris.
Regards,
Mike

How to disable SSLv3 and RC4 on Lync Server Access Edge?

We use Lync Server 2013.
How to disable SSLv3 and RC4 on Lync Server Access Edge?
This solution https://technet.microsoft.com/en-us/library/security/3009008.aspx doesn't work

Hi dizen,
To completely disable RC4, you can create the following registry key:
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Ciphers\RC4 128/128]
"Enabled"=dword:00000000
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Ciphers\RC4 40/128]
"Enabled"=dword:00000000
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Ciphers\RC4 56/128]
"Enabled"=dword:00000000
For more details, please check out this KB.
http://support.microsoft.com/kb/2868725
Best regards,
Eric

How the sound - microphone - and bluetooth devices works in Windows 8.1 Client Hyper-V

How the sound - microphone - and bluetooth devices works in Windows 8.1 Client Hyper-V
I would like to get some resources about detailed information on the subject above.
Any help would be greatly appreciated.
Thank you,
carloss

check this
Hyper-V in Windows Server 2012 R2 Client Hyper-V Enhanced Session Mode in Windows 8.1
Starting with Hyper-V in Windows Server 2012 R2, Hyper-V can now redirect local resources to a virtual machine session through Virtual Machine Connection tool. The enhanced session mode connection uses a Remote Desktop Connection session via the virtual
machine bus (VMBus), so no network connection to the virtual machine is required
https://technet.microsoft.com/en-us/library/dn282274.aspx

How to properly create and configure SharePoint 2013 Search service with PowerShell?

Hello Forum,
I have installed SharePoint 2013 across three tier servers:
WFE Server (Of course, SharePoint is installed here. Bsically this is just a Web server)
APP Server (Of course, SharePoint is installed here + Central Admin + Service Apps).
SQL Server
I now want to create and configure the Search service, obviously on the APP Server, But of course the search functionality should work correctly on the WFE server to.
I want to do this via a proper PowerShell script. I found Spence Harbar's script on: (http://www.harbar.net/articles/sp2013mt.aspx), But it has three problems, and they are as follows:
1) Spence Harbar himself literally stated on his article that this script is for: "deploying on a single server farm", But what if I have three tier servers? Could anyone please help me out in suggesting the required tweaks in the
script?
2) By default Search uses the SP_Farm account, So, How can I change the script to use other dedicated account for the search service e.g. SP_SearchAcc ?
3) How can I modify the script to specify a default Search center?
4) Apart from all the three aforementioned point - Is the script missing anything?
I would greatly appreciate your inputs - Thanks !

the only differences are where you place the components. if you are doing a small server farm with a 1-1-1, most likely you just need to change the script so that you set the index and query processing component on the front end, but the others on
the app server. just a 2 second update... just keep in mind this will work, but I am making several assumptions without any knowledge of your farm, users, capabilities.
generally, there would be more of a breakout on the topology than that, but im guessing for this farm that you wont have dedicated search servers. also, a lot depends on # users (rps really), # items in index, size of VMs (RAM for query processing,
Disk for index, etc, etc), and making sure the topology works for your particular environment and needs.
if you want more detailed topology help, which aligns as closely as possible to "best practices" (not that those exist in SharePoint, go ahead and provide the total # users, average/peak RPS for search, current index size, content source types,
VM specs RAM, CPU, #/Size of drives, HA concerns/priority (obviously isn't, since only 1-1-1)
Christopher Webb | MCM: SharePoint 2010 | MCSM: SharePoint Charter | MCT | http://christophermichaelwebb.com

How to disable Save and SaveAs Button in Adobe Reader ??

I am having Dynamic XML Form (XFA based) designed on LC Designer ES2
I Want to disable Save and SaveAs button whenever it would be opened in Adobe Reader only.
Other way around, i want to provide only facility to save form programmatically through Javascript to apply validation.
Plz help
Thnx in advance..!!

I can apply folder level java script ...But How to handle this way on CLIENT SIDE..???

Satellite P - How to disable hibernation and standby?

I have set power configuration to say Never for both Hibernation and Standby - both occur.
What am I doing wrong?
I would be happy with Standby but do NOT want Hibernation!

Hi p g allison,
Did you set these settings for current power profile?
For example if you disable standby and hibernation for High Performance power profile but you are using or switch to Balanced the settings dont work.
So check if they are disabled in all power profiles!!!

How to disable drag and drop feature for a document library?

Hi
How can I disable drag and drop feature for a document library? Do I have an option to disable it from the SharePoint's feature set?
Or can I disable it using a script? If so, how?
Regards
Paru

Hi,
According to your post, my understanding is that you want to disable drag and drop feature for a document library.
Drag and drop in SharePoint 2013 is a feature that depends on HTML5, which requires version of browser, SharePoint by default doesn’t has feature to disable or enable this.
You can try disabling the drag and drop feature by disabling an add-on in Internet Explorer, or
using Internet Explorer 9 or lower.
Here is a similar thread for your reference:
https://social.msdn.microsoft.com/Forums/office/en-US/8961ff07-039d-47b0-ae7d-8e24af96234a/2013-doc-library-settings-turn-off-drag-and-drop-and-findsearchfilter-on-metadata-columns?forum=sharepointcustomization
http://community.office365.com/en-us/f/154/t/228079.aspx
More information:
The Solution to SharePoint 2013 Drop and Drag Not Working
SharePoint 2013 Drag and Drop Upload Not Working
Best Regards,
Linda Li
Linda Li
TechNet Community Support

How to Allow microphone and all hardware in Virtual Machine using Hyper-v

I have recently installed Windows 10 preview in Windows 8.1 pro.
How i can allow Microphone and all things in virtual machine from Hyper-v
Thanks
Thank You , Shan Ali Khan

You connect to the VM using the RDP Client - connecting to the IP / name of the VM over the network.
This enabled all device redirection by default.
You can possibly use Enhanced Session Mode as well. That again uses RDP under the hood.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

How to Disable VRFY and RCPT

How does one disable VRFY and RCPT on Ironport AsyncOS for Email Security 7.6 and what is the impact? I understand an attacker can perform an account enumeration and verify whether e-mail accounts exist and a spammer can automate the method to perform a directory harvest attack and send spam emails.
Thanks

There are three SMTP commands that apply here.
VRFY - not implemented by ESA. ESA will respond "250 ok" to everything
EXPN - not implemented by ESA. ESA always responds "500 command not recognized"
RCPT - can't be "disabled" as there is no other way to specify envelope recipients.
I would recommend that you set up LDAP Accept and DHAP (Directory Harvest Attack Prevention). That will allow the ESA to stop dictionary attacks. Once too many bad recipients have been tried the appliance will reject all recipients from that IP address for an hour.
DHAP is normally best set up to function during the SMTP conversation and to drop connections. If you enable it during the work queue your appliance can get bogged down with undeliverable outgoing messages from all the bounces. Dropping the connection can help with botnets since they usually don't waste time by re-queuing messages to be tried later.

How to disable graphics and/or java in Firefox 23.0.1

In previous versions of Firefox, like 19.0, it is a simply matter to disable graphics and/or java. Simply go to Firefox "Tools", "Options", "Content", unclick "Load images Automatically", unclick "Enable JavaScript".
With Firefox 23.0.1, I don't see that as a option. How do I easily disable and enable the graphics and javascript?
I am aware that "Adblock" has some capabilities to do some of this. Although I find Adblock more complicated and have not been able to achieve my goals with it.
This is very important to me.

"In Firefox 23, as part of an effort to simplify the Firefox options set and protect users from unintentially damaging their Firefox,"
Are you kidding? so you mean to tell me that it helps users by requiring them to download third party addons(memory leaks and all) just to do something that use to be as simple as clicking a button?
If i have to use untrusted third party add-ons that i need to download to my computer i may as well just ,i don't know, Download a new browser while im at it.
If anything they should have just made it EASIER to find so users could EASILY undo what they EASILY done.
it's hogwash to say "just use addons" I try to keep my add-ons and extensions to the bare necessities for a reason. And coming from a user who until recently was stuck with dialup(because there was no other options) the ability to remove images is key. That and if im in a public setting i don't want to put my facebook images on display.
Overall, HUGE mistake by firefox.

How would i install and configure HS on windows?

Hello,
I would like to explore more about installing and configuring HS on windows box (64-bit).
I have two questions.
1)Is there OD4ODBC software avaliable for 64-bit windows? if not 32 - bit software works with 64-bit windows OS and 11G Database which is also 64-bit?
2)can some provide me more steps to configure it, if it's possible.
3) is there any other way to connect ro MS SqlServer from Oracle other than using ODBC/Gateways?
Thanks,
Steve.

For 64bit Windows you need to have a 64bit DG4ODBC - DG4ODBC 64bit for Windows was first released with 11.2.
1)Is there OD4ODBC software avaliable for 64-bit windows? if not 32 - bit software works with 64-bit windows OS and 11G Database which is also 64-bit?
=> No - only 64bit DG4ODBC is supported - so please use DG4ODBC 11.2
2)can some provide me more steps to configure it, if it's possible.
Please have a look at this note: How to Configure DG4ODBC (Oracle Database Gateway for ODBC) on 64bit Windows Operating Systems to Connect to Non-Oracle Databases Post Install [Document 1266572.1]
which is available through My Oracle Support portal.
3) is there any other way to connect ro MS SqlServer from Oracle other than using ODBC/Gateways? The easiest way is a gateway, but you could use a JDBC driver and load the MS SQL Server JDBC driver into the JVM of the Oracle database, then code the connection.

How to disable microphones and configure WLAN on Satellite A210-11b?

Similar Messages

Maybe you are looking for