How to disable MOH for "on Hold" button.

CUCM 6.1
When on a conference call if a user presses "on Hold" button, music is played for all participants and nobody can hear anything. How can I disable music on hold for all users?
Please note, I could disable MOH for conferencing. But this is different issue. This is e.g. when everyone is in a conference (no matter what conference system, it could be ready talk, meeting place,...)and a participant receives another call and wants to answer the other call, in this situation I don't want any MOH played for other participants.
Thanks,
rdianat

I first tried "suppress MOH for conference" by service--> service parameters -->select server --> select callmanager --> go to "clusterwide parameters(Feature-General) --> change the "Suppress MOH to conference Bridge" to true"
This did not work. The reason is that these users are accessing an internet coferencing system like "ready talk" and not a cisco conferencing system, so for Cisco this does not appear to be a conference but it is like a regular call.
I only have two callmanagers which also serve as MOH servers.
Media Resources-->Music On-Hold Server -->Set Run Flag to "NO"
This is explained in "MOH FAQ" from cisco.
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_qanda_item09186a0080094766.shtml#q21
The other way of doing this is not to assign any MOH server to the MRG or create a device pool without any MOH. (Media Resource Group set to NONE)
Although the above disabled the MOH, still the TOH "Tone on Hold" which is beep-beeps played every 10 seconds was annoying. So I increased the interval to 20 seconds by the same instructions in "MOH FAQ" how to disable / change TOH. Go to same page explained above but to "clusterwide Parameters(Device-General) and change "Tone on Hold Timer" Value to 20.
rdianat

Similar Messages

How to disable iMessage for a single contact?

Hello apple communites, I have a simple and hopefully simple to answer question..
I am curious as to how to disable iMessaging for a single contact. My sister when she got her phone number originally had an iPhone, she has since gotten an android and kept the same phone number. However I am running into issues with text messages to her, my phone still thinks she has an iPhone and continues to send every text as an iMessage, resulting in a failed message. I can easily hit the "send again as a text message" option and the message/picture sends as normal. I however find this a bit fustrating, and have tried everything I can think of to attempt to disable this. However all the online tutorials I can find regarding disabling iMessage turns the feature off completly, I don't wish to do that.
I have attempted to completely delete, (including all existing all texts and call history), and then re-add the contact, but that does not work either, my iPhone still attempts to send messages to my sister as an iMessge. Any help, if any, would be appreciated. Thanks in advance.

Your sister needs to disable iMessage on her iPhone if the iPhone is still available if she hasn't already done so.
If she has, does she have iMessage enabled with the same Apple ID on another iOS device or on a Mac as was used to activate iMessage on her iPhone?

How to disable click for open a app mobile? i have picture.

how to disable click for open a app mobile?
How i do?
why adobe captivate need to click for open app.
i need to open auto.
thank you

Swiping down from the midle of the screen will open the search window on its upper section.

How to disable debugger for sapscript forms.

How to disable debugger for sapscript forms.
Once activated in se71-Utilities-Activate debugger I do not know how to disable it

Thank you Rich
I assigned you points for good answer on my preavious mail)
. Actually my real problem is a transported the SAP script form znalepke2 , printer definition nale
and device type zststartsp of a thermal printer.
On original system (ak1) the printout is ok but on target system(ak2)
not.
Lateron I transported also :
R3TR SCPD 1403(as the device type uses this character set)
R3TR TABU TSP08 (All entries)
R3TR TABU TSP1D(All entries)
R3TR TABU TSP1T(All entries)
I used also report RSTXSCRP to traport form and device types. L
Lately I discovered that when I performe printout preview I get also eronneous printout If I ssue an printout preview in language "EN" on system "ak1"(only on system ak1 and form preview in "SL" is oK. What steps you suggest me to solve the prolem
Thank you in advance

How to disable cache for a particular Report in obiee 10g?

HI
My name is Rani .Learning obiee10g ifaced 1 interview in that they asked me like how u disable cache for a particular report?

In the advanced tab of the report, under prefix you need to mention:
SET VARIABLE DISABLE_CACHE_HIT=1;
Refer below link
http://tipsonobiee.blogspot.com/2009/06/step-by-step-to-bypass-all-caches.html
Thanks

How to disable IPv6 for loopback adapter (lo0)

I was wondering if anyone knows how to disable IPv6 for the loopback (lo0) adpater. I know how to do it for other adapters using the Network preferences pane, but lo0 doesn't appear there...
Thanks,
- alan

I need to temporary disable ipv6 address of lo0 (which by the way is not 127.0.0.1 but ::1) for testing development purpose..

How to disable iMessage for certain contacts

I was wondering how to disable iMessage for certain contacts!

Try deleting the phone number from the persons contact and then re-entering it as a new number.
You don't have to delete the entire contact.
Worked for me.

How to disable iMessage for an old Apple ID which is only used for AppStore?

How to disable iMessage for an old Apple ID which is only used for AppStore?
I used my old Apple ID for iMessage and AppStore Apps. Now I'm using my iCloud Account (second Apple ID) on my Mac as iCloud and iMessage Account.
New Apple ID - iCloud & iMessage (**** thing that I can't use my okd Apple ID for iMessage and another for iCloud) on new Mac
Old Apple ID - AppStore, iMessage days ago
So now how to disable the iMessage function for my old Apple ID which isn't used anymore?
Thank you!

Yeah the problem is that I want to be reachable by:
*new apple id
*mobile number
Earlier:
*old apple id
*mobile number
Problem - if I set in Settings => Messages => Receive at:
*new apple id
*mobile number
Others still can see my old apple id as "iMessage" although it isn't used a iMessage anymore. So how to disbale iMessage function for that?

Grid Control how to disable alert for Tablespace UNDO is 99 percent full

I am new to Grid control and want to know how to disable alert for UNDO tablespace full.
Target Name=xxxx
Target type=Database Instance
Host=xxx
Occurred At=Dec 24, 2010 1:21:00 AM EST
Message=Tablespace UNDOTBS1 is 99 percent full
Metric=Tablespace Space Used (%)
Metric value=99
Tablespace Name=UNDOTBS1
Severity=Critical
Acknowledged=No
Notification Rule Name=Database E-Mail Notifications
Notification Rule Owner=SYSMAN

You should post in the grid control foruma.
But just go to databases, select your database, metric and policy settings, find the tablespace metric, edit and exclude the undo tablespace.

How to disable the maximize and minimize button of JDialog

How to disable the maximize and minimize button of JDialog. I have an application which has JDialog box, but in that i should not have maximize and minimize button.If any one come across this problem and got a solution please helpout me.

Btw, isn't it a little strange to ask thisquestion...
Actually, I thought it was meant to be sardonic...
Dialogs don't have those buttons, so the question
n should be to the OP how did he/she get them in the
first place? Cuz they aren't using JDialog to do it,
unless it's something to do with a specific look &
feel.I somehow missed that, good point :-)

How to disable MOH from playing on 1 queue

We have several queues in our
CUCCX ver 5.0 and need to disable MOH from playing while
callers are on hold for 1 queue. Does anyone have any info on this?

Hi Carlo,
The MOH is played to the customer via the CTI ports. So when the CTI port places the caller on "hold" they hear whatever the hold source is defined for that port.
So, if you have a Call Control Group with all the CTI ports and you are using your CSQ's so that they share those ports across all CSQ's then you can only do an all or none on the MOH because you can only change that to the whole CCG. When you navigate to appadmin and find under the Subsystems - Unified CM Telephony menu to the Call Control Group, choose the group you want to change. Then click the Show More button at the bottom and look for the following:
User Hold Audio Source
Audio source heard by the caller when the Cisco Unified CCX Script places the caller on hold via the Hold Step (when the user presses the hold key).
Network Hold Audio Source
Audio source heard by the caller will when Cisco Unified CCX performs a Consult Transfer (when Unified CCX calls an agent). Use this entry for the .wav file (for example, .wav file playing a ring back tone) to be played to the caller during this Consult Transfer.
If these values are set to None, then the callers will not hear any MOH.
So to summerize, if you are sharing one CCG with all CSQ's you will affect all CSQ's if you change this value. If you want to ensure that only the CSQ that you want to disable the MOH on is affected, I would recommend creating a new CCG with User Hold and Network Hold set to None and assigning that to the CSQ that you do not want MOH on.
Hope this answers your question.
Mike

How to disable checking for sites security certificates

I work in a company which manipulates its server in a way to make all unwanted sites look like not having a valid certificate so when I try to open them like gmail site I get a message that this site doesnt have a valid certificate and firefox - or any other browser- dont open the site. The question is: how to disable this feature in firefox to stop looking for sites certificates or doesnt care about them?

Exporting a root certificate in another browser would only be helpful if it did work in that browser.
If it happens in other browsers as well then it would be of any help.
I'm not seeing the button to add an exception as that would allow to inspect the certificate in the Certificate Manager.
Is that specific page opened in an (i)frame?
If "I Understand the Risks" is missing then this page may be opened in an (i)frame and in that case try the right-click context menu and use "This Frame: Open Frame in New Tab".

How to disable UAC for standard account in windows 8.1 single language OS

Hi,
How to Disable UAC in a standard account on windows 8.1 single language OS.
application for mobile modem (TATA DOCOMO) always asks for administrator password, in windows 7 I used to just set UAC never Prompt in admin account and same setting would reflect in standard user account and then users where not prompted for password but in
windows 8.1 single language edition I have disabled UAC in admin account but in standard account the setting for UAC was still in default (notify me when programs try to make changes to my computer), if I try to set never, the ok button is greyed out with
message saying that you must be logged in as administrator.
And Group policy editor, local security policy are not available in windows 8.1 single language.
can any one give command to disable UAC using CMD.
OR
set registry to not prompt for admin password.
Thanks in advance..........

Hi Ed,
But in control panel -> user accounts -> Change user account control settings
I can set the settings to always notify
and default notify when programs try to make changes to computer.
But I can't set it to never prompt because only administrator as power to do that and if I set never prompt in administrator account the settings in standard user remains in
always notify.
so please let me know, if there is any other way to over come the problem.
Main problem is application from unknown source always prompt for admin password.
I need to disable it from prompting for admin password to run applications in standard accounts.

How to disable autorun for usb ?

hi,
any body please tell me how to disable auto run for usb as we connect it.

Hi,
I am writing to add a note to help anyone trying to do this.
I had been searching for help on this for hours and the Microsoft KB you referenced only gets you part way to the solution.
The problem on my T60 was the Group Policy Editor /Admin Templates did not show the System so I could not get to the "Turn off Autorun" item as referenced in the KB. I could not find the soulution anywhere on Microsoft or other help forums.
Good News! Here on the T400 forum this question was answered in 2008. The solution works great. My thanks to the contributor of the answer. Here is the text of the answer: I guess it would apply to any Thinkpad and others as well.
Posts: 1
Registered: 12-20-2008
Location: California
0
Re: gpedit - many functions missing, please help
Options
12-20-2008 12:58 AM
Hi tdushane,
I had this same issue on my XP SP3 machine. This is how I resolved the issue:
1. Go to start run and type in gpedit.msc
2. Under computer configuration right click on the administrative templates
3. Click on add/remove templates
4. Click the add button
5. In the folder look for system.adm and double click on it
6. Verify that system is listed then click close.
Now you will see all the missing folders.
Hope this helps!
~JB~
This helped me too

How to disable iMessage for a specific contact/How to unregister iMessage from former device

I switched from an iPhone 4 to a Galaxy S3. When my wife who still has an iPhone 4 tries to text me it still sends the message as an iMessage and I NEVER receive the text on my Galaxy S3. It still shows the little blue bubble next to my name when starting a new text thread. So I checked with about 4 other iPhone users that text me on a regular basis and I'm not receiving any of their messages either.
If the iPhone users turn off iMessage the text comes right through. However I dont expect all the iPhone users on my contact list to turn off the iMessage feature just so they can text me.
I no longer have my old iPhone. I traded it in at Best Buy so there's no way of going back in the phone to change any settings. The iPhone was wiped of all data and settings anyway before I traded it in.
I took my wifes iPhone and deleted my contact. Then I added it back. Still shows my name as iMessage. I took my e-mail address out of my contact entry on her phone and it still shows my name as iMessage.
I logged into "Apple Support - My Support Profile" to try to unregister my device as suggested in another forum but I can't get past the "enter your purchase date" page. It was a refurbished iPhone and the date I purchased the device didn't work. Theres no way I'll ever get the original purchase date since I wasn't the original buyer of that iPhone.
Any suggestions?? This is an urgent matter as I NEED to receive text messages from my wife and other iPhone users. My wife is willing to turn off iMessage on her iPhone but I don't expect everyone else to.
I need to find out how to unreigster my old iPhone completely from iMessage.... or find out how to disable a specific contact on my wife's iPhone from using iMessage.

If you still have an iPhone handy and have the SIM card you used for the phone, then temporarily put your SIM into the other phone and go into Settings and turn of iMessage. If not, the only alternative that I know of is the Support profile, However, you may what to search the More Like This section on the right side of the thread to see if any of the entries there have a green checkmark meaning they are answered.

How to disable MOH for "on Hold" button.

Similar Messages

Maybe you are looking for