How to disable one F key without disabling the rest

OK, this is the situation:
I don't want to disable all the keys because i use them often.
I've already tried FunctionFlip, but it doesn't seem to work in Final Cut Pro (and the reason I need to disable one of the keys is primarily because I need it for a FCP shortcut)
is there another way to disable only one key?
OR - If I were to disable all F keys, how do I reassign some of them back to their default mac function? does anyone know the names of the menu commands for Volume up and down and for mute?
Thank you so much!

To use the F keys as assigned in FCP....

Similar Messages

  • How do I add a ringtone without syncing the rest of my phone??

    I recently bought a mac, and got my own apple ID (up to now my mother, sister, and I have all been using the same one). If I sync my phone to my mac I lose most of my stuff and what a pain in the butt it would be to pay to get all of that back on my phone. I found that for music, the "autofill" button is a way around syncing since I never really use music on my phone except for running. But now I downloaded a new ringtone, that was not through iTunes and it will no longer let me click and drag to add it to my phone. Is there any other way that you know of to add a ringtone to an unsynced phone?

    Copy the entire /Music/iTunes/ folder from your other computer to /Music/ on your Mac and your iPhone will sync fine.
    Make sure to authorize your computer for the old iTunesID.

  • How to disable the trackpad while typing on mbp without mouse ?

    how to disable the trackpad while typing on mbp without mouse ?

    Like Kappysaid :
    Kappy wrote:
    Open Universal Access preferences. Under either the Keyboard or Mouse tab should be a checkbox option to prevent accidental input when typing. If you don't find it there then check in the Trackpad preferences.
    or find the apple instructions here http://support.apple.com/kb/HT3608
    Good luck

  • How to disable the run-time popup menu in the sequence display on TestStand Operator Interface, that allow the use to skip the test?

    How to disable the run-time popup menu in the sequence display on TestStand Operator Interface, that allow the use to skip the test?

    Hello,
                  Regarding the skip/force pass/force fail options, when I set the ControlExecFlow to True in Teststand 3.1 and 3.5, in the Sequence Editor the menu options for skip/force pass/force fail are not active for Technician but, when I launch the Operator Interface logged with Technician the options are active. The problem is that if the technician sets one step to one of these options, and change the user to Operator, the test step remains skip/force pass.
                  Is there any possibility without modifying the Operator Interface (at programming level), to reload default values of the steps when changing the user to Operator?
    Thank you,
    Best regards,
    paio

  • How to disable the vibration feature for the Alarm?

    How to disable the vibration feature for the Alarm?

    Hi guys , because we have no answer to our issue how to take off the vibration when alarm is on , and our other profiles like ringtones, messages , reminders and so on we need to keep them on vibrate mode , the best solution is to install a free application from store called "alarmed " ; I did put it down on my phone and now i can use the alarm clock without any vibration at all ! That's the answer to our issue , before Apple is going to find a solution !
    Personally , I don't think is going to be fix it soon , as long as the apple script made for pop ups is general one !
    Good luck everyone

  • How to disable the dashboard and spotlight for the latest Iion OS

    How to disable the dashboard and sportlight function in the latest Mac OS?

    to disable spotlight, open the terminal and type "sudo mdutil -a -i off" without the quotes. ( You will be prompted to enter your admin password.)
    to disable dashboard:
    Open Terminal, and then type this command, followed by the Return key:
    defaults write com.apple.dashboard mcx-disabled -boolean YES
    This tells the system that you no longer wish to have Dashboard available. However, the Dashboard task is actually “owned” by the Dock, so to make your changes take effect, you need to restart the Dock. The easiest way to do that is to type this command into the Terminal (and press Return when done):
    killall Dock
    After the Dock restarts, hit F12 and you’ll see…nothing at all. If you run Activity Monitor, you also won’t find any Dashboard widgets in the list of tasks, even if you had several open when you ran the above command.

  • How to disable the reminding dialog when close the webi report viewer

    Dear all
    How to disable the reminding dialog when close the webi report viewer
    Background
    When user close the webi report viewer in inforview by click the button in the right-top of the webi report viewer frame. It always prompt a dialog to remind user that the modification will be lost without saving.
    But customer need to disable this dialog, and can clost the report viewer directly.
    So is there any ways to modify this?
    I think it shoule modify some .js file under tomcat, but can not find the solution.
    Thanks a lot, any information woulde be appreciated.
    David Zhang

    I've had the same issue bugging me since installing Snow, er, lion, er, cat, er, cougar, er, Mountain Lion. Incredibly ANNOYING.
    It's stupid stuff like this and reverse scrolling that really turn long-timer users off. I'm personally glad Forstall got fired for blunders such as these.
    I'm serious peeved that turning off iCloud Documents & Data actually deletes documents and data locally. That's just incredibly stupid.
    MANY thanks mende1 for the answer on how to fix it.

  • How to disable the previously entered user ID's that automatically appear. For example ; when logging into email , first letter of user ID promts the previously used email user IDs... Want to disable this feature---How can ot be done ?

    Question
    How to disable the previously entered user ID's that automatically appear. For example ; when logging into email , first letter of user ID prompts the previously used email user IDs... Want to disable this feature---How can it be done ?

    *Click the (empty) input field on the web page to open the drop down list
    *Highlight an entry in the drop down list
    *Press the Delete key (on Mac: Shift+Delete) to remove it.
    *http://kb.mozillazine.org/Deleting_autocomplete_entries
    * Tools > Options > Security: Passwords: "Saved Passwords" > "Show Passwords"
    * Tools > Options > Privacy > History: "Remember search and form history"
    * https://support.mozilla.com/kb/Remembering+passwords
    * https://support.mozilla.com/kb/Form+autocomplete

  • How to disable the EO cache in AM ?

    My customer share AM defination codes between two applications,and let EO coexist in multi AMs.And they have build a lot of codes.I wonder if this will exist trouble.
    from the support documents, I know the AM has an EO cache. after one client update an EO,if second client get the EO from the same AM,It will get it from the cache. What I want to know:
    1.if the EO also exists in another AM2 in same Application,can the AM2 cache refresh data according to the AM1 update?
    2.if AM2 can't be refreshed,how to disable the AM2 EO cache,then let all query directly to database ?

    I need to clearify the scenario,this is really happening in a customer project,I just have a chance to review the codes today.
    A team develops a system, they use AM1 to IUD data,B team also want to use the data,they have a separate app,and dont' want to define from EO to VO again,but A team don't want B team take the insert and update ability to A database, so they develop a simplify AM2,and give the source codes to B team.
    I feel what they do is not right,but they must put it online and have no time to listen to me.Currently I want to find some fast way to avoid the data unconsistency risk.
    But I dont know if am2 alone in an app,what the app should do to get refreshing data which is updated by another app.
    BTW, from the customer concern,they could not create AM2 from AM1.because the AM1 and AM2 will not coexist in same app.

  • How to Disable the Lead selection Action on aTable n How to Refreh a Page

    HI....
    1)How to Disable the Lead selection Action on aTable n How to Refreh a Page r web dynpro application.
    In my case i have a table n user enters data on multiple rows in table , n i have some input fields outside of table for those Inputs fields am settiing the data  at the screen initilization(in Init() moethod by hard code).the problem is whenever the is clicking in th 2nd row of a table the Lead Selection is triggerig and the data in the Input Fields outside the table is not displayinig.
    So by removing the lead Selection Action of a table i thought i can reslove this,
    2) How to refresha page(like we click F5 on key board),is it can be done thru code in web dynpro application
    Regards
    Rajesh

    Hi,
    You did not explained what is your functionality or coding in leadselection. Is that action on leadselection is necessary for you?.
    1)If you just want to remove the action then go to table properties and remove the action for leadselection.
    2)If you still want to continue with your leadselect action, then what you can do is.. write the code in leadselection action to again set the input fields which are out from table.  That is what you did in your init method.
    Page Refreshing
    3) What do you mean by page refreshing? is that refreshing your table only or both the table and input fields. 
         What I understood is you are allowing the user to enter values in table and soon after pressing a button the values should be saved and the data in input fields shld be deleted.  For this if you only invalidate the node then the user entered data will be lost. 
    So what you do is after getting the input data from the user add it to a ArrayList and then invalidate the node which clears the data in input field. Finally bind the Arraylist to your node.  see the following code. This is a concept make changes according to your requirement
    ArrayList list1=new ArrayList();
    wdContext.nodeAbc().bind(list1);
    IPrivateExcelviw.IAbcElement ele = wdContext.createAbcElement();
      ele.setNo(wdContext.currentAbcElement().getNo());
      ele.setName(wdContext.currentAbcElement().getName());
      ele.setMarks(wdContext.currentAbcElement().getMarks());
      list1.add(ele);
      wdContext.nodeAbc().invalidate();
    wdContext.nodeAbc().bind(list1);
    Revert me if you have any doubts
    Regards
    Raghu
    Edited by: Raghunandan Madarikuruva on Oct 16, 2008 8:07 AM

  • Facing Strange Problem in DIR HOW TO DISABLE THE RIGHT CLICK MOUSE IN THE DIRECTOR? (through parent script/ movie?)

    Summary : HARD QUESTION : In the DIR file, the game runs well, right click = no effect. Coz I'm not making right click scripts. BUT in EXE file, right click = ERROR.
    Explanation :
    In the Adobe Director screen, this DIR file game is worked 100%.
    I tested right click EVERYWHERE... NOTHING HAPPENS.
    Because I don't make any programming with "on rightmouseup" or "on rightmousedown" command.
    THEN, I published it into EXE...
    I tested right click EVERYWHERE...I hoped the result will be the same as DIR tests....
    WHEN I RIGHT CLICK IN THE AREA THAT'S GIVEN ON EXITFRAME ME, IT SHOWS ERROR, CHANGING PICTURES.....
    this does not happened in the DIR file...
    I didn't make a runmode program or anything else.... This is awkward... mystery for me...
    WHY THERE'S A DIFFERENCE IN DIR and EXE... it should be exactly the same result.
    I have used Director for years.... This is really strange for me...
    >>>>>>>>HOW TO DISABLE THE RIGHT CLICK MOUSE IN THE DIRECTOR?
    THIS ONE is useless.... It doesn't prevent the rightmouse click,...
          on rightmouseup me
                 nothing
         end
          on rightmousedown me
                 nothing
         end

    Dear Adobe Forums friends
    I need your help and guide through this problem...
    In the game's dir file that is run on the DIRECTOR softwawre,
    the game runs perfectly, I can do LEFT CLICKS (coz I programmed the script)
    and when I do RIGHT CLICKS = there are no effect ( coz I don't do script for it)
    LATER THIS GAME TURNED INTO EXE.
    It supposed to run like the dir file as ABOVE. BUT STRANGELY, WHEN
    I DO RIGHT CLICKS, it turns Error and showing as the picture attachment.
    The right clicks that goes error are above the picture of numeric button only. (in DIR file
    this run normal). I looked into the script behind the numeric button picture, there are only "on exitframe me", there are no script I made inside the "on exitframe me" that is triggering RIGHT CLICKS.
    1. I wonder why there are differences in DIR and EXE effect
    2. Why right click? Left click effects are all normal.
    3. IS THERE ANY WAY TO DISABLE ALL RIGHT CLICKs since the beginning of EXE. So the game will be run normal. I don't need right clicks anyway, but whenever people do right click there will be ERROR.??
    4. Is there any way to STOP THE MESSSAGE BOX TO APPEAR IN FRONT OF THE GAME? (I hate the Dirrector Error Message Box), or auto press OK.
    NB: this game uses Buddy API Xtras, File IO Xtras.
    Thx
    David S

  • How to disable the validity of a particular Role for 100 users, in a single

    Hi
    How to disable the validity of a particular Role
    which is assigned to 100 users. (disabling the role of change the validity of the role )
    at present am doing manually, by entering into each user and changing the validity of the role
    Thanks.

    > How to disable the validity of a particular Role for 100 users, in a single ...
    ... shot?
    Assign a reference user to the 100+ users and create events in the factory calendar which assigns and removes the role from the reference user only.
    The downside is that it is not scalable for many of the same concepts at the same time, because a dialog user can at one logon time only have one reference user assigned to them.
    Cheers,
    Julius

  • UCM - WEBDAV - How to Disable the New Folder option in the action popup

    I am trying to implement WebDav functionality. I don't want the users to create folders in the folder mapped to a security group. As long as the user has privilege to contribute to the security group he/she can checkin documents but they should not be able to create folder under it. I did not find documentation as to how to disable the new folder option in the context action menu that pops up on mouse right click. Is there any way we can do that?
    Thanx.
    Edited by: user10991492 on Nov 1, 2010 11:24 AM

    This is the boilerplate text often used in connection to networks in general. It is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe:
    If you are opening files over a network or saving them to a network server, please cease and desist immediately in the event you are currently experiencing problems with one or more files.
    Working across a network in general is not supported by Adobe.
    See: 
    http://kb2.adobe.com/cps/406/kb406793.html
      Copy the CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
        Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work.  It should.
        Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
      If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.

  • How to disable  the mouseWheel event in Flex2?

    How to disable the mouseWheel event? Basically I want my
    flex2 app not to respond to any mouse wheel events. Thanks.

    I downloaded one of the PDF form (IMM5490) from cic.gc.ca and saved it on my computer after filling it up. Later on the following message popped up when I tried to open the form again later to in order to make some changes.
    "This document enabled extended features in Adobe Reader. The document has been changed since it was created and use of extended features is no longer available. Please contact the author for the original version of this document"
    Your help in this regard will be greatly appreciated, since, I have already filled the form with a lot of information and I will not be able to edit the form with additional information unless I disable the extended features ( I guess).

  • How to disable the maximize and minimize button of JDialog

    How to disable the maximize and minimize button of JDialog. I have an application which has JDialog box, but in that i should not have maximize and minimize button.If any one come across this problem and got a solution please helpout me.

    Btw, isn't it a little strange to ask thisquestion...
    Actually, I thought it was meant to be sardonic...
    Dialogs don't have those buttons, so the question
    n should be to the OP how did he/she get them in the
    first place? Cuz they aren't using JDialog to do it,
    unless it's something to do with a specific look &
    feel.I somehow missed that, good point :-)

  • Dear apple, can you please tell me how to put my 'x' key back onto the computer properly without giving me an answer which will make me want to buy a pc like 'we WILL only replace the entire keyboard'?

    dear apple, can you please tell me how to put my 'x' key back onto the computer properly without giving me an answer which will make me want to buy a pc like 'we WILL only replace the entire keyboard'?

    My profile does say level 1 (0 points) quite obviously pointing out i am a noob at this, although i did try to correct myself in the previous responce to **macbook.
    I am confused why you think i havn't answerd michaels question though. 'I assure you the keyboard or the joining parts aren't broken and if it isn't broken i dont feel the need to replace it. '- that was me in the first responce explaining why im not buying a new one, answering the very question he asked.

Maybe you are looking for