How to disable product update on Cisco AnyConnect mobility client

Hallo,
Do you anybody know how to disable/turn off "Checking for product update" during _every_ connecting Cisco Anyconnect Secure Mobility Client (VPN) to remote sites?
I found it may by possible on the ASA side, but I need to disable it on the client (computer). I can see that checking is NOT during connecting to my company site, but when connecting to ANY OTHER site everytime is new version checked. It takes some time ... and I need to switch between VPN often.
Thank you for your help!
Regards, Ondrej

You should be able to do this in the AnyConnect local policy. Just add (or edit, if you already have a local policy file) the following to the local policy file:
<!--?xml version="1.0" encoding="UTF-8"?-->
<anyconnectlocalpolicy acversion="2.4.140" xmlns="http://schemas.xmlsoap.org/encoding/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemalocation="http://schemas.xmlsoap.org/encoding/ AnyConnectLocalPolicy.xsd">
<BypassDownloader>true</BypassDownloader>
</AnyConnectLocalPolicy>
The local policy file can be found here:
Windows Vista/7/8: C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\AnyConnectLocalPolicy.xml
Linux/Mac: /opt/cisco/anyconnect/AnyConnectLocalPolicy.xml
See the Enabling FIPS and Additional Security in the Local Policy section of the Cisco AnyConnect Secure Mobility Client Administrator Guide, Release 3.1 for more details.

Similar Messages

  • Install Error when installing CISCO AnyConnect Mobility Client

    When installing Cisco AnyConnect Mobility Client 3.1.02040, I get the following install error:
    There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.

    When installing Cisco AnyConnect Mobility Client 3.1.02040, I get the following install error:
    There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.

  • I have an older mac and it wants me to update to itunes 10 but my mac is too old and I cant figure out how to disable the update

    I have an older mac and it wants me to update to itunes 10 but my mac is too old and I cant figure out how to disable the update so I can use the store.

    If Software Update is offering the update then it would be compatible with your model.  Unfortunately, you haven't provided us with any information on your hardware that would enable us to determine if it really is too old.
    If you really wish to disable the update alert then the next time Software Update opens, select the update in the list then select "Ignore update" from SU's Update menu.

  • How to disable cs5servicemanager update popup at startup?

    how to disable cs5servicemanager update popup at startup?

    I am getting the same thing since I updated to Yosemite last week
    At EVERY restart and boot I get the message, "To Open 'CS5ServiceManager' you need to install the legacy Java SE 6 runtime.
    My System running 10.10:
                  Model Name: MacBook Pro
                  Model Identifier: MacBookPro10,1
                  Processor Name: Intel Core i7
                  Processor Speed: 2.6 GHz
                  Number of Processors: 1
                  Total Number of Cores: 4
                  L2 Cache (per Core): 256 KB
                L3 Cache: 6 MB
                Memory: 16 GB
                  Boot ROM Version: MBP101.00EE.B05
                  SMC Version (system): 2.3f36
                  Serial Number (system): C02J57H7DKQ5
                Hardware UUID: 8678CB48-DA7A-537F-A2B2-B3A53F98456B
    All Adobe software is up-to-date with CC2014
    All Adobe CC software has been uninstalled except a couple like Bridge, Lightroom 5, Adobe Acrobat Pro XI
    Any Ideas what is going on?

  • Problem using SunRay with Cisco AnyConnect VPN Client

    I am using Cisco AnyConnect VPN Client Version 2.5.3046
    I  have a PC and a SunRay connected to my router. I use VPN to connect my  SunRay and my PC to my work computer. My PC works fine, I am able to  connect to the internet and also run cisco VPN to connect to my work  computer. But when I try to use my SunRay, I get a window on the screen  with the message:
        VPN IKE Phase 1 agg I msg1This window  keeps moving around on the screen. I am not able to connect my SunRay  through VPN to my work computer. Any idea what could be wrong and how I  can fix this?

    2.2 is definitely better.
    On one PC, I'm fine. On another -- very similar -- it tells me it can't start the VPN even after uninstalling and re-installing and everything else I can think of, with plenty of re-boots inbetween.
    Aaaaarrrrrrggggggghhhh.

  • How to disable click for open a app mobile? i have picture.

    how to disable click for open a app mobile?
    How i do?
    why adobe captivate need to click for open app.
    i need to open auto.
    thank you

    Swiping down from the midle of the screen will open the search window on its upper section.

  • Trouble with Cisco Anyconnect VPN Client

    Hello,
    our Cisco AnyConnect VPN Client has stopped working, we are a medical office and we are attempting to connect to "clientvpn.e-mds.com" however it will not connect, the username and password we input are irrelevant it doesnt come up with a "wrong credentials" window it just erases the password and at the bottom of the window it says "Please enter your username and password". our version is 2.5.0217 does anyone know anything to try? any help would be appreciated

    you may want to try the OS X networking forums:
    http://discussions.apple.com/forum.jspa?forumID=733

  • VPN issues after updating to Cisco AnyConnect 3.1.04072?

    Even after downloading the most recent version of Cisco Client 3.1.04072 (see below) I'm still getting a periodic disconnect and reconnect from my VPN client.  Issue only seems to occur when I'm connecting from outside my company's wi-fi network.  Happens on both my personal and on public wi-fi.  Is anyone else experiencing a similar issue?
    Changes in AnyConnect 3.1.04072 (and 3.1.04074)
    The Mac OS X versions of AnyConnect were updated to 3.1.04074 to resolve the problem of frequent disconnects of the AnyConnect VPN on systems running Mac OS X 10.9 (Mavericks). Apple is aware of this issue and you can reference Apple Bug Report ID 15261749 if you want to open your own case with them. AnyConnect 3.1.0474 also supports Mac OS X 10.8, 10.7 and 10.6.
    Once Apple provides a fix for OS X 10.9, we may choose to retract this workaround. At that time, both versions 3.1.04074 and 3.1.04072 of AnyConnect will work reliably with Mac OS X 10.9.
    Defect CSCui69769 was fixed by version 3.1.0704.
    AnyConnect 3.1.04072 is a maintenance release that resolves the defects described in Caveats Resolved by AnyConnect 3.1.04072 and is compatible with Host Scan Engine Update, 3.1.04075.

    Pete is right, I apparently don't know how to read version numbers!  I downloaded the 3.1.05152 version of Cisco AnyConnect, and I no longer experience the reconnect issue on Mavericks.  Yea!
    In my defense, there is no such version 3.1.04074 listed on the download page:
    http://software.cisco.com/portal/pub/download/portal/select.html?&mdfid=28300018 5&flowid=17001&softwareid=282364313
    So I mistakenly downloaded 3.1.04072 in a moment of dyslexia.  I suspect I'm not the first person to come along and do this!
    PS:  You need a service contract with Cisco to download this file.  If you don't have one, and/or your IT administrator isn't able to provide you with one, you might try doing a google search for the actual filename:  anyconnect-macosx-i386-3.1.05152-k9.dmg.  If you go this route, at least compare the md5 checksum with the one listed on Cisco's website (it shows up if you hover your cursor over the file) to ensure you're not running a hacked VPN client.  For example, running "md5 anyconnect-macosx-i386-3.1.05152-k9.dmg" should produce a884f2092d08f006b2dc3a5054988f1c.  If it does not, it's not the same binary as on Cisco's downloads page so you probably don't want to run it.

  • Help~How to disable Adobe Updater in Reader 8.*/9.*?

    Does anyone here know how to disable the Adobe Updater by registry or Group Policy?(if possible)
    I won't like to manually disable them by "Help" -> "Check for updates"
    The following registry key only works in 6.*/7.*
    [HKEY_LOCAL_MACHINE\Software\Adobe\Acrobat Reader\6.0\Updater]
    "bShowInstCompDialog"=dword:00000000
    "bShowNotifDialog"=dword:00000000
    "iUpdateFrequency"=dword:00000000
    [HKEY_LOCAL_MACHINE\SOFTWARE\Adobe\Acrobat Reader\7.0\Updater]
    "bShowInstCompDialog"=dword:00000000
    "bShowNotifDialog"=dword:00000000
    "iUpdateFrequency"=dword:00000000
    Help~

    I don't know where that preference item is stored. But if it's in the registry, I would do the following if I were in your situation.
    *export the entire registry
    *set the no-update preference, according to Aaron's suggestion
    *export the entire registry again (to a different name)
    *compare the two files (e.g. with windiff); that should show you what's changed in the registry

  • How to disable auto update?

    On the Q10, how can the automatic updates be disabled so that operating system version updates cannot proceed without user approval?
    Thanks!
    . . . .  Pete

    petercreasey wrote:
      Does doing this block the service provider from "forcing" an update on our Q10s? 
    In the best "IT Speak", it should. But there is no way for us to know for certain.
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How to Disable Auto Updates on Flash Player 10 using mms.cfg

    Hi Friends,
    I am a newbee into this.I am trying to install a customized Adobe Flash  Player 10.2.153.1 in which auto updates are disabled.  I went through the Adobe guidelines and found that it is possible to do the same using a MMS.CFG file. Can anyone tell me how exactly this would look like. I will be extremely thankful if someone can attach a sample of the same.
    One more question...
    When we disable auto updates using mms.cfg file, will this be updated in the Global Settings Manager ?
    Tries from my end till now:
    I tried to create a mms.cfg by editing a txt file and adding "AutoUpdateDisable=0 " and then saving teh same as mms.cfg using UTF-8 encoding. this didnt make any difference in the Global Settings manager.
    Please help me...
    Regards,
    Dilip

    http://kb2.adobe.com/cps/167/16701594.html
    But it seems that you have done everything correctly; doesn't it work?
    dilzmail wrote:
    One more question...When we disable auto updates using mms.cfg file, will this be updated in the Global Settings Manager ?
    No, I don't think so; these settings are stored in a different place.
    Some users have reported that AutoUpdateDisable via mms.cfg does no longer work in Flash Player 10.3.  Please check if this failure already occurs in Flash Player 10.2.

  • How to disable auto updates

    How does one disable "check for automatic updates" in Java 6, version 17? On the Update tab, the box is checked, but it is grayed out and won't let me un-select it.
    Thanks for any help.

    http://kb2.adobe.com/cps/167/16701594.html
    But it seems that you have done everything correctly; doesn't it work?
    dilzmail wrote:
    One more question...When we disable auto updates using mms.cfg file, will this be updated in the Global Settings Manager ?
    No, I don't think so; these settings are stored in a different place.
    Some users have reported that AutoUpdateDisable via mms.cfg does no longer work in Flash Player 10.3.  Please check if this failure already occurs in Flash Player 10.2.

  • How to Disable Software Updates

    One of my customers, a small school district, has an Xserver running OS X 10.6.6. All of the student and teacher MacBooks are also on this version. The district is deploying a program called DeepFreeze on the student laptops which will prevent them from saving any and all changes to the laptop. They have local administrative rights, but when the laptop is rebooted, it is like they never logged in. Therefore, Apple Software Updates are useless and really undesirable. They'll be downloading the same updates everyday. They can turn DeepFreeze off and run the updates, but this will not be on a scheduled basis. Is there a way through Workgroup Manager that I can disable the updates for the student group?

    We turn that off in system preferences for each local account. I even build a DEFAULT template with it turned off. It works fine until we image the machine.  Any new machine with that image, the Apple updates, Bluetooth are turned back on!!!
    How do you keep them turned off after a restore? The original machine with the master image still works. they only turn back on after using the image of the master.  Very annoying that every app on  a mac has to search for updates all the time, then multiply that times a 1000 machines and a 15m internet connection. Do the math.
    if anyone knows how to KEEP the settings after a restore, let me know.
    Lannie

  • How to disable auto update jre-6u20 by script

    Hi,
    our users can not update java, because of domain-restrictions.
    So they should not become the notification.
    How can we disable auto update for version jre-6u20 by script?

    Trying to figure out the same thing. I came across the following two links but I don't think they will disable the updates to community help itself. So from what I can gather you need to do the following:
    Turn off autoupdates to AIR (See below)
    Turn off updates to Community Help (No clue how to do this)
    Install Local content (See below)
    Disables updates to AIR
    http://help.adobe.com/en_US/air/admin/WS485a42d56cd1964167ea49bd124ef17d52a-7ff5.html#WS48 5a42d56cd1964167ea49bd124ef17d52a-7ff2
    Turn off internet access/help and copy local help
    http://kb2.adobe.com/cps/849/cpsid_84992.html
    Turn off internet access (not sure if you need to do this one and the one above or just the one above)
    http://kb2.adobe.com/cps/846/cpsid_84665.html
    You can download the latest version of AIR and Community Help.
    Link to latest version of community help
    http://www.adobe.com/support/chc/
    Hopes this helps.

  • How to disable auto update for corporate installation

    I've scoured the forums for this information and was not successful locating a viable answer.
    We need to update 1500 corporate clients to the latest version of QT, but we need the auto update feature turned off when the upgrade is complete. We do this for two reasons: 1) Users do not have permissions to run the installer, so even if they wanted to run the update they would be unsuccessful, and 2) we need to test any updates before they are distributed to the general population.
    For past versions we created a QTP file with the auto update turned off, then placed it into the C:\documents and settings\all users\application date\apple computer\quicktime folder. This method is no longer successful.
    Changing the settings for each individual user is not an option, we need a method that will change the setting for any past, current, or future user on all of our computers.
    Any guidance is appreciated.

    Trying to figure out the same thing. I came across the following two links but I don't think they will disable the updates to community help itself. So from what I can gather you need to do the following:
    Turn off autoupdates to AIR (See below)
    Turn off updates to Community Help (No clue how to do this)
    Install Local content (See below)
    Disables updates to AIR
    http://help.adobe.com/en_US/air/admin/WS485a42d56cd1964167ea49bd124ef17d52a-7ff5.html#WS48 5a42d56cd1964167ea49bd124ef17d52a-7ff2
    Turn off internet access/help and copy local help
    http://kb2.adobe.com/cps/849/cpsid_84992.html
    Turn off internet access (not sure if you need to do this one and the one above or just the one above)
    http://kb2.adobe.com/cps/846/cpsid_84665.html
    You can download the latest version of AIR and Community Help.
    Link to latest version of community help
    http://www.adobe.com/support/chc/
    Hopes this helps.

Maybe you are looking for