How to disable SC message BBP_PD 008 and BBP_PD 882

how to disable SC message BBP_PD 008 and BBP_PD 882

Hi. Why do you want to disable 008? That message means no account assignment has been entered, you will not be able to save your cart.
What is 882? I can not see that in SRM 5.
Regards,
Dave.

Similar Messages

How to disable the message from setUser and setPassword

When I call OracleConnectionCacheImpl.setUser and setPassword,
I get some message like this:
Setting the user name and passwwdd xxxx xxxxx
How can I disable this message?

You are correct. The only way to stop it, is to turn off iMessage. Your frustration is actually the reason they made iMessage. It was designed so you could be working on your Mac, and if you recieved a text message, you could reply with out having to locate your phone. I understand it can be frustrating because in my expeirence, when I'm away from my desk, anyone with access to my computer can then sit there and enjoy my conversation with out me knowing about it... I have since started logging out of Messages on my Mac when I walk away. then no one can see it, and when I log back in, the messages are synced back up again. Good luck!! Cheers!

How to disable the selection of "Title and logo URL of a SharePoint 2013 site" from browser

how to disable the selection of "Title and logo URL of a SharePoint 2013 site" from browser or How can we able to set our custom default log to the sp2013 site using code.So that users are not allowed to change from browser again.
Thanks & Regards, Krishna

Hi Krishna,
For your issue, you need to deploy a farm solution using HideCustomAction to hide site settings link. For example to hide “Title, description, and logo” link you can use below code:
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<HideCustomAction
GroupId="Customization"
HideActionId = "ProjectSettings"
Location = "Microsoft.SharePoint.SiteSettings">
</HideCustomAction>
</Elements>
Reference:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/92f002b7-0e9c-424e-836a-de40c4e5d81f/hide-option-from-site-settings-page-in-sharepoint-2010?forum=sharepointdevelopmentprevious
http://blog.milanchauhan.com/2013/06/add-custom-section-in-site-settings.html
Best Regards,
Eric
Eric Tao
TechNet Community Support

How to disable Refresh,Reload in browser and user should not allow to multiple browser sessions ?

Dear All,
How to disable Refresh,Reload in browser and end user should not allow to multiple browser sessions in portal.Where we need to configure the settings or any code in masthead or any other component. My server version is 7.4 - SP5 .Please help us.
Thanks for advance,
BR,
Durga Rao.

Dear all,
i am able to logoff the click refresh button on keyboard.I am using this code to log off the user into the portal.
document.onkeydown = function(e)
var key;
if (window.event) key = event.keyCode
else
var unicode = e.keyCode ? e.keyCode : e.charCode
key = unicode
switch (key)
{ //event.keyCode
case 116: //F5 button
LSAPI.sessionPlugin.logoff();
event.returnValue = false;
key = 0; //event.keyCode = 0;
return false;
case 82: //R button
if (event.ctrlKey)
LSAPI.sessionPlugin.logoff();
event.returnValue = false;
key = 0; //event.keyCode = 0;
return false;
case 91: // ctrl + R Button
LSAPI.sessionPlugin.logoff();
event.returnValue= false;
key=0;
return false;
Thanks.
But i am unable to control the multiple windows opening the browser.So any one can tell me the how to block the new window and new tab/duplicate tab option.
BR,
Durga Rao.

How to install Nokia Messaging Software (Push and ...

How to install Nokia Messaging Software (Push and Pull email) on SD CARD?
I have got Nokia Push email instaled on NOKIA 6110 Navigator. This instalation take all of my phone internal memory, and mailbox is in phone internal memory too. How to install or move program or mailbox to SD card?

I'm surprised that Nokia will spend all that effort to miss out on one little detail - EMAILS WITH ATTACHMENTS TAKES UP A LOT OF SPACE - The least they could do was allow us to point the application storage to the SDHC card.
I love the messaging app, but I just can't afford to give up so much phone memory - So it is not getting installed until we can point storage to the SDHC card.

How to Disable the Adobe Flash Player and Reader Updates

Ok, For the last two months or so, I have been plagued by the Adobe Flash Player and Reader updater that will not go away. That's not the worst thing though: Somehow, someway, the Adobe updater subverts my entire windows 7 machine and makes itself the most important program on my system, stopping all other necessary functions. After I just turn it on, the updater will suspend all Windows operations in favor of the updater getting its message out the Adobe "needs" updating. I have tried updating the stupid thing, only to find that after the update goes in, my whole computer locks up and I have to load a system restore point. This thing acts like a virus, and until someone comes up with a way to make it work properly, that's what I'm calling: Adobe creates and sells a computer killing virus. I want a sure fire way to disable the updater that will work, and that will never bug me again about updating the virus. After going through three different computer repair companies, many online forums and chat rooms and my own knowledge of how to disable programs, I have instructed my firewall to block all attempts by Adobe to update. This has to stop.

Flash Player:
Adobe Reader:

How to disable nag message for easy-webprint EX install

I didn't install Easy-WebPrint EX when setting up my Canon Pixma MP495 printer. Ever since, I get a nagging message asking if I want to install Easy-WebPrint EX, but there is no option to disable the message that is very annoying. How can the nag message be disabled? I don't ever want the Easy-WebPrint software installed.
Gary

Group Policy settings
The following Group Policy settings have been added for Terminal Services printing:
Use Terminal Services Easy Print printer driver first
This policy setting is located in the following node of the Local Group Policy Editor:
Computer Configuration\Administrative Templates\Windows Components\Terminal Services\Terminal Server\Printer Redirection
The possible values are:
Enabled or Not configured: If this policy setting is enabled or not configured, the terminal server will first try to use the Terminal Services Easy Print driver to install all client printers. If for any reason the Terminal Services Easy Print driver cannot be used, a printer driver on the terminal server that matches the client printer will be used. If the terminal server does not have a printer driver that matches the client printer, the client printer will not be available for the Terminal Services session. By default, this policy setting is not configured.
Disabled: If you disable this policy setting, the terminal server will try to find a suitable printer driver to install the client printer. If the terminal server does not have a printer driver that matches the client printer, the server will try to use the Terminal Services Easy Print driver to install the client printer. If for any reason the Terminal Services Easy Print driver cannot be used, the client printer will not be available for the Terminal Services session.
-According to MS using TS Easy Print renders jobs faster, cause they are smaller in size then emf.
-There are steps to complete to see all user session printers, One was to add the "Print Server" role to the Terminal Server, add yourself to the "Print Operators" group and a few other things. Do a search for it, you'll find it.
-Also all clients MUST be running XP sp3 OR Vista sp1 AND .NET Framework 3.0 sp1. The .NET Framework is what makes it all work correctly. As far as the Arabic thing, can't help!Network Administrator

How to Disable Transparency in Menu Bar and Tabs

I have Firefox 35 installed on a Windows 8 pc. When Firefox last updated about a month ago, I think it went from about version 31 to the current 35. When this happened, all of my Inactive Tabs and the Menu Bar went completely transparent so I could not see what sites were in my Inactive Tabs and I could not even see the Min/Max/Close Window options at the top-right.
On the Windows 8 pc (my primary pc):
- I only had a couple Extensions installed: Colorzilla, LastPass, WOT
- I had only the Default Theme and 2 other Themes.
The Active Tab, Bookmarks Toolbar, & the URL still display fine with the default background color. I already tried using the Refresh Firefox tool. It removed my couple of Extensions & Themes, but the only other thing that changed is that now my Inactive Tabs are completely black instead of transparent so I still cannot see what sites they have open. The Menu Bar is still transparent.
I attached a screenshot. You can see the Black Inactive Tabs. I don't know if you can tell, but the Menu Bar is transparent.
I can't even use Firefox like this. Any ideas how to fix this?
FYI, I also have Firefox on a Windows 7 pc and it had no Extensions and no Themes installed at all and the same thing happened with the recent update. I tried the Refresh Firefox on this one and got the same exact result so it does not appear to be a Windows 8 issue.

I have not customized anything. All my other browsers are fine, it is only Firefox that has this issue and it's on 2 different pc's.
I have tried using the default theme and even downloaded, enabled, & disabled 3-4 other themes and none of them effect the transparency or the blacked out tabs.

How to disable the message that pops up every time i connect my iphone "photos in the camera roll of iphone cannot be imported because the device is locked with a passcode"?

Wrongly posted in iPhoto forum, should probably be posted here instead.
I want to remove the message that pops up every time i connect my IPhone that says: "Photos in the Camera Roll of "Name" cannot be imported because the device is locked with a passcode.".
This computer is not one that I want to import photos to (or sync with the iPhone), so this message is just very annoying, and it pops up all the time. I cannot find a way to disable this message. It is constantly appearing. No application is launching, I have turned off the iPhoto launch in the Image Capture app as well as in iPhoto. Thanks in advance if anyone has any information about this.

Because your computer sees your phone, as it would see any digital camera, as long as you have photos in your camera role. Since you state you don't sync with this computer & have a passcode on your phone, that's why you get that message. The only way to prevent that message is either start syncing with this computer; remove the photos from your camera roll prior to connecting; or first turn off your passcode before you connect. Either that, or you live with it.
You shouldn't be storing photos in your camera roll anyway. iPhone camera roll is not designed for photo storage. You should be regularly importing them.

How can i delete messages on iMessage and have them STAY GONE?

How can I delete messages from my iPhone and have them STAY GONE and not have them show up on my computer or iPad? Same thing, how can I delete from any of these and have them NOT show up on the other devices? If I delete on one, it stays on the other. It's a constant circle of deleting messages? I want them gone when deleted. Maverick. iPad4th iPhone 5
Thanks.
Sandy

Hi,
First off.
The "Sync" as Apple calls it is only "Display on all Devices" and nothing more.
Deleting it on one device will not delete it on another.
On the Mac the iMessages are stored in ~/Library/Messages in file called chat.db with a couple of supporting database items alongside.
If you "close" or remove the chat in the list in the Messages window (the x when you mouse over the name and pic) then the iMessage will "return" as an "Aid Memoire" to the previous conversation.
This is local on your Mac and is nothing to do with any 'sync' over the iMessages servers.
The longest time I have experienced was using my iPhone on a hotel WiFi on a Friday evening away form home and picking up those same iMessage on Sunday evening when I turned my Mac on.
The iMessages servers "push" the iMessages to the devices it thinks are Registered.
However this only happens once. When the device has the iMessages the servers stop sending it.
This is to stop what you seem to describe - the endless attempt to delete the same iMessages.
It is more likely you are talking about the "history" feature.
9:56 pm Friday; February 7, 2014
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

How to disable text message forwarding on Mac?

I never allowed text message forwarding on my iPhone, yet my mac and iPad still receives messages. How do I fix this problem if I do not want this feature on my mac and iPad?

Hello Jivaraval,
After reviewing your post, I have located an article that can help with SMS relay:
SMS
With Continuity, all the SMS and MMS text messages you send and receive on your iPhone also appear on your Mac, iPad, and iPod touch. Even if the person you’re communicating with doesn’t have an iPhone. And regardless of what phone they have, you can reply from whichever device is closest to you, including your iPad or Mac. You can also initiate a conversation by clicking a phone number in Safari, Contacts, or Calendar.
To use Continuity for SMS and MMS on your iPad, iPod touch, and Mac:
Update your iPhone to iOS 8.1 (when available).
Enable iMessage on your Mac and iOS devices.
On your iPhone, go to Settings > Messages and turn on Text Message Forwarding.
Your iPad, iPod touch, or Mac will display a code you can enter on your iPhone to verify the SMS and MMS feature.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

How to disable a ipod 5th gen and how to get the passcode ?

I just bought ant ipod 5th gen from Americans store but it was a display when I got ready to set it up it don't let me go pass the disable connect to iTunes screen. I try restoring it but it don't let me it takes about 1 hour to load and then it gets to the same screen it asks me to enter the passcode on the ipod and then continue with the restoring but I can't enter the passcode sense it won't let me go more then the disable connect to iTunes screen. Plz help me.

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
You may have to:L
Try disabling the computer's antivirus and firewall.
- Next try the manual install method of:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
Place the iPod in recovery mode after the firmware download is complete and then restore using the instructions in the article. Sometimes recovery mode timeouts and returns to disabled before the firmware download is complete.
- Then try on another computer

I just upgraded to ios5 how do i remove message preview? and also my notifications are on and im not getting them in notificiation center although i have messages on facebook etc my phone isnt showing them

please help i dont know how to turn off message preview with new update also i just restored my iphone cause my notifications are on but im not getting them in my notification center even tho i have them when i manually go into app and check them,

Settings > Notifications > Messages > Show Preview > Off.
Have you checked your notification selections for each app at Settings > Notifications?

How to disable keyboard shortcut for Type-And-Transfer

Hi,
I'm trying to create a macro in Excel that I want to use the ctrl+shft+h keyboard shortcut. However, Lenovo's Type-and-Transfer tool has hijacked that shortcut so everytime I try to use the shortcut within Excel it launches the Type-and-Transfer tool. I've looked everywhere and cannot, for the life of me, figure out how to disable this keyboard shortcut from launching the Type-and-Transfer tool. Anybody have any idea?
Thanks in advance,
jd

Hi,
here is what I would check in:
Registry:
- HKEY_CURRENT_USER\Software\IBM
- HKEY_CURRENT_USER\Software\LENOVO
- HKEY_LOCAL_MACHINE\SOFTWARE\IBM
- HKEY_LOCAL_MACHINE\SOFTWARE\Lenovo
<sorry as I don't havea system with this shortcut type I cannot find the exact same key combination>
My second thought is going more in the direction of an application, that is called Keyboard Customizer
Try this one, if that will fit your request.
Let me know any update, that you can give on this situation.
Cheers

How to disable upgrade message in DW CS5?

Whenever I open one of my project folders, I get a flash of a message coming up which is too quick to read. It's only started happening recently, since I had a problem with cache recreate.
I haven't managed to see the whole of the message but did grab a bit of it using PrtScn and it reads:
"Upgrade to Dreamweaver CS5.5
A must-have release with new CSS3.HTML"
Does anyone know how to stop this message from appearing?
Thanks

Hi SnakEyez02 and thanks again for getting back to me.
It was neither of the ways shown in your links. As I'm new to all this, I've been doing quite a bit of testing with contact forms, light boxes etc. These were set up as individual 'sites' on DW, although none were ever live. I had quite a few folders like this so decided to put them all into one folder called DW-Testing. The first folder went in ok (ContactTest), the second (LightboxTest)gave me the message:
"The root folder you have chosen is the same as the folder for site 'ContactTest'. This may cause some operations, such as synchronization, to work incorrectly. Proceed anyway?".
As they were just test sites, I decided to see what happened and ok'd it. Unfortunately, neither worked after the move so I tried to move LightboxTest back to my desktop. I got the message:
"The cache will now be recreated because the name, root folder, HTTP address of cloaking settings of the site have been changed."
I ok'd this and watched in horror as DW whizzed through 500+ files!! I tried to escape out of it, but couldn't.
When it had finished, I opened DW and found that LightboxTest was now a top level folder for literally everything on my desktop. Below is a example of what I can see in Files Panel:
TOP LEVEL: Site - Lightbox Test (C:/Users/myName/Desktop)
Sub folder: Spotify.lnk (link to a music player)
Sub folder: Lytebox Test (this is one of my test folders)
Sub folder: Fancybox Test (this is one of test folders)
Sub folder: Scanner (a folder containing my scanner software)
Sub folder: EOS 40D (a folder contain my camera software)
Sub folder: IsoBuster.lnk (link to software)
If I delete a .lnk it removes it from my desktop. If I put anything on my desktop, it appears in the Files Panel.
I did everything through DW using Site > Manage Sites > select the site > Edit and then changed the path from
C:/Users/myName/Desktop to C:/Users/myName/Desktop/DW-Testing.
Any advice or guidance you can give as to what happened, and why would be much appreciated; along with how to stop the messages from appearing.
Thanks again.

How to disable SC message BBP_PD 008 and BBP_PD 882

Similar Messages

Maybe you are looking for