How to disable search assist without toolbar?

Hi,
I want to disable the search assist feature, also known as "error assist". The only instructions I can find refer to a verizon toolbar: http://www22.verizon.com/ResidentialHelp/Generic/VerizonToolbar2010/VzToolbarFAQs/128047.htm
I have verizon DSL. I connect via a wireless linksys router.
However, I don't have this toolbar, and don't want it. I'm guessing that years ago when I signed up with Verizon, I eliminated the toolbar because it is a feature I don't want.
It will come as no great surprise that I'm quite annoyed at having to disable these features. These features should be opt-in, not opt-out.
Thank you,
Ryan

Thanks for your reply.
re: "change your Linksys to use any one of the following servers". I'm not sure where in the router's admin interface to do this.
Under the status tab, one part of the interface shows...
dns 1: 71.252.0.12
dns 2: 68.237.161.12
However, it's not clear how to edit this and I'm not even sure if this is what I need to change.
Under the basic setup tab, the interface has three rows for static DNS 1, static DNS 2 and static DNS 3. These are all set to 0.0.0.0. Is this what I should be editing?
Ultimately I'm trying to prevent the "search assist" feature from interfering with a setting in my browser than (normally) should handle all keyword searches I perform in the location window with the search engine of my choice.

Similar Messages

How to use migration assistant without creating dual user accounts

I want to use migration assistant to transfer apps, software & files on my macbook pro to my new macbook air. How can I do this without creating two user accounts for myself on the m-book air -- my account from the m-book pro & the one that the air makes me create as soon as I do start-up? Can I just use the same name & password for both? or will that make things go badly awry?
Thanks!

If you have not booted the MBA for the first time and gone through the Setup Assistant, then I would use the Setup Assistant to make the transfer before you even create another user account. However, if you've already created the new user account on the MBA, then create a new admine one with a different username than the account you will migrate. Log into this new account, delete the first account you made, then use Migration Assistant to transfer your account from the MBP.

How to disable fax assistent?

I try to print with the fax printer driver out of Microsoft Word or any other printing action with the fax printer driver set by the internal modem. Always appears the fax assitent which makes it necessary to create a cover sheet. I didn't find a way to disable the fax assistent.

Hello Torsten
Im another opinion. The fax assistant has nothing to do with Toshiba. You can try to find any fax driver on Toshiba Tools and Utilities CD but believe me you wont find anything similar with fax driver.
Furthermore how I said, you can find more exactly inforamtons on Microsoft sites.
Check this link ad take a look on other subsites:
http://office.microsoft.com/en-us/results.aspx?Scope=DC%2CEM%2CES%2CFX%2CHA%2CHP%2CQ Z%2CRC%2CTC%2CXT&Query=fax&App=WD
Bye

How to create a pdf without "ToolBar" in Adobe Reader by designer?

My target is :
A PDF is created by Livecycle Designer9,when people open it by reader that not show toolbar.
If the PDF is created by Acrobat,I can set the Document Option to do it
But in Livecycle Designer9,I don't know how to do.
Please help me,thanks.

Hi,
Do you mean "open in full screen mode"?
If so there is an example here: https://acrobat.com/#d=JK2I24ZgmsvMr6BtCQNMOg
The script is in buttons to show the separate functions, but you can combine the ones you want in the docReady event.
Hope that helps,
Niall
Assure Dynamics

How to disable internal battery without a display?

The display on my T440s is dead. I would like to remove the hard drive before sending the laptop in. The user guide says to disable the internal battery before moving the hard drive - but this requires access to the BIOS configuration, which cannot be done on an external monitor.
Is it essential to disable the internal battery before removing the SSD? If so, how can I do this?
Thanks

SQL> select t1.col_a, column_value col_b
2 from scott1 t1, TABLE(t1.col_b) t2;
COL_A           COL_B
onetwo              1
onetwo              2
threefour           3
threefour           4
onetwo              5
SQL> commit;
Commit complete.
SQL> update table(select col_b c1 from scott1 where col_a = 'onetwo') t1
2 set column_value = 6
3 where column_value= 5;
1 row updated.
SQL> commit;
Commit complete.
SQL> select t1.col_a, column_value col_b
2   from scott1 t1, TABLE(t1.col_b) t2;
COL_A           COL_B
onetwo              1
onetwo              2
threefour           3
threefour           4
onetwo              6
SQL>

How to disable search help for material key?

Hi Expert,
I have a input field of matarial number in the screen, and the search help is always shown with the field although I do not want it.
I want the customer to enter the material number manually without using the search help.
What should I do
Thanks for your time,
Anna

Anna,
set the input help mode property to Deactivated of the context attribute associated with input field
Thanks
Bala Duvvuri

How to binary search ITAB without structure

Hi everybody,
I defined an ITAB with
lt_rlm_pods TYPE TABLE OF int_ui.
where int_ui is a data-element not a structure!
So, the following is not possible:
READ TABLE lt_rlm_pods WITH KEY int_ui = ls_anlage-int_ui
                BINARY SEARCH
                TRANSPORTING NO FIELDS.
Does anbody know how to performe the binary search?
Thanks
Regards
Mario

Hi Mario,
Try this:
TYPES: BEGIN OF ty_int_ui,
             int_ui TYPE int_ui,
             END OF ty_int_ui.
DATA: lt_rlm_pods TYPE TABLE OF ty_int_ui.
READ TABLE lt_rlm_pods WITH KEY int_ui = ls_anlage-int_ui
                                        BINARY SEARCH
                                        TRANSPORTING NO FIELDS.
Regards,
Viswa.

How to disable T60p mic without disabling other mics?

I use a headset occasionally and I want the onboard mic to always be disabled while allowing a plugged-in mic to work. Any advice?

You can mute it with software or another simple external solution would be to plug a jack into the mic port, this will disable the internal mic. You can buy jacks at stores like RadioShack or cut one off a bad mic.
If you want to mute it try going to control panel>Sound, double click the integrated microphone and select "recording" tab and click on "levels". You should be able to mute just that mic.
ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)

How to disable hostname verification without code

Hello.
Is there a way to disable the hostname verification during SSL connection, ? I mean something like a system property, since i use an existing application and i've not the source to set my own custom hostname verifier.
Thanks.
Ephemeris Lappis

Hi
I faced the same problem and as I see now I'm not the only one :o)
Did you find the way to do it, please?
Very appreciating any inputs,
Sincerely,
Jabb
null

How to disable Sync Apps without removing them?

i am choosing not to sync my apps, but i still want to sync every other things like address book, music, movies, etc... but whenever i uncheck the sync apps box and Apply, it will warn me that all the apps in my iphone will be removed.
any solution to this as i still want to keep my apps and their data in it...

No, and what are you expecting or wanting to gain by no longer having Sync Apps selected under the Apps tab for your iPhone sync preferences?
This is no different from deselecting Sync Music, Sync Movies, or Sync Photos after being selected. Doing so removes the content from your iPhone with the next sync.
Leaving sync apps selected serves a couple of purposes. You can remove an app from your iPhone by deselecting the app under the Apps tab followed by a sync. To re-install the app later, reselect the app under the Apps tab followed by a sync. This also provides for an app downloaded/installed with your iPhone being copied to your iTunes library with the next sync after doing so.
There is no solution since there is nothing to solve. This is by design and intended.

How do you disable backup assistant?

Does anyone know how to disable backup assistant? It doesn't work very well for me and I don't want it messing up
my contacts on my phone anymore. Thanks, Geoff

How do you turn of the backup assistant on Droid X that is causing issues regarding Contacts?
On your phone, go to Settings (it’s the left button on the bottom of the phone)
Then click on ‘Settings;
Then click on ‘Accounts’
There you should see an account referring to an email account.If you don’t see an account referring to an email account, I recommend that you go to a ‘Verizon’ store where they can assist you.
If there is an account referring to an email account, click on that account.
You should see links for ‘Sync Books’, ‘Sync Contacts’, ‘Sync Gmail (for example), and ‘Sync Calendar’If you do not see an account you are looking for, I suggest that you go to a ‘Verizon’ store where they can assist you.
If you have found the account(s) you are looking for, make sure that the check box for that account is ‘greyed out’. If not, the click on that account and ‘grey ou the check box’.
For those who are having issues with syncing there’re ‘Contacts’ between Gmail and their Droid X, this should solve that issue. This has been successfully tested.

NEED INFO ON HOW TO REMOVE ""LOGIN ASSISTANCE LINK'' ON THE MAIN PAGE r12

Hello, we want to remove (or make it invisible) the "LOGIN ASSISTANCE' on the main page of the r12 instance before we go live. WE will not be given that option to our end-users. Can you please advise how to. THanks.

Pl see MOS Doc 735964.1 (How to Disable Login Assistance link in R12?)
HTH
Srini

How to disable Deinterlace?

I have some film based material captured from videotape.
So it is originally progressive even it is in interlaced mode in the tape.
I have to do resizing to it (because qt7 does not support non-square pixels in mp4's), so I'm going to use "Frame Controls".
I'd like to use Resize filter at Best, but how can disable the deinterlacing, without losing any resolution?
If I set Deinterlace to Fast, it will still do Line averaging, which will decrease picture quality of originally progressive footage.
If I set it to Best it will take 30sec to compress one frame...
Help, pretty please?

I think "legal" DVDs can only have one of three types of audio, either uncompressed PCM, Dolby/AC3 (and I guess DTS), and MPEG1 layer 2. MPEG1 layer 2 is supposed to be popular with PAL material and Apple's support for that format is somewhat limited, so could that be the audio format you have?
If that's the case I'd just demux your original MPEG2 file to a .m2v and either PCM/AIFF or .m1a/.mp2 (the latter being typical files extensions for MPEG1 layer 2 audio). I don't know if MPEG Streamclip will output from MPEG1 layer 2 to PCM/AIFF but if it doesn't there are utilities that will. Also, you might try a different demux utility if you think Streamclip is failing to maintain the progressive setting in your video. Try the freeware bbDEMUX utility or the $10 shareware program MPEG2 Works. bbDEMUX is getting a little old, but it still works for me. However, its drag and drop interlace doesn't function, thus use file -> open. In addition to demux, MPEG2 Works also does conversion from MPEG1 layer 2 audio to 48KHz WAV and a number of other tasks including both MPEG1 and MPEG2 compression.
After that, I'd just use Compressor to output directly from the resultant .m2v and PCM/AIFF files. I wouldn't worry (at first) about the 720x540 versus 720x576 issue since Apple's software often seems to report dimension for MPEG2 that are auto-magically adjusted for pixel format. The end result may be fine.
As for the Frame Controls and deinterlacing, it may be as you suggest (same as source/native field dominance progressive). Why don't you just give it a try and see if it deinterlaces the video or not (that is, if you can't see any difference in the before and after then why worry about it).

Landmarks display in Maps, how to disable ?

I am using Landmark feature to plan routes, and i managed to import routes from google earth as landmarks in my E71.
Three question remaining:
1. How to disable the display of the landmarks ? Once i have choosen to display a category, i do not know how to disable it again (without deleting the landmarks). Since loading of maps takes more time with landmarks active i would like to switch them off again.
2. Some landmarks are not loaded (usually around 20% of the landmarks create errormessage and do not have valid coordinates). Can not find the reason... anybody else having this problem?
3. Does anybody know how to create own symbols? The blue pin-point is to big... would like to have simply a very small point on the map.

I'm not sure if you can remove your personally saved favourites from the display. There is a choice in Maps 2.0 to enable and disable showing of certain types of "Point Of Interest":
Options>Tools>Settings>Map>Categories
But this does not include favourites, and there is no similar option under the Favourites section.

I have updated to Mozilla 16.0.1 and yahoo toolbar 2.4.8.20120412011105. Search assist now no longer works on the toolbar. Enter key also will not work on toolb

I have updated to Mozilla 16.0.1 and yahoo toolbar 2.4.8.20120412011105. Search assist now no longer works on the toolbar, nor does the enter key. I've reinstalled both Mozilla and the yahoo toolbar. I've followed the instructions given in the customize toolbar section, but I am thinking that perhaps this toolbar just doesn't work with Mozilla?

'''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
''(If you're not using it, switch to the Default theme.)''
* You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Don't select anything right now, just use "'Start in Safe Mode"''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
'''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
Please follow the [[Troubleshooting extensions and themes]] article for that.
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

How to disable search assist without toolbar?

Similar Messages

Maybe you are looking for