How to disable soundcard on km4m?

I have a km4m motherboard. i just got a copy of cool edit pro to record, but i cant record in the multitrack format. the cool edit pro help thing says that i need a full duplex sound card. so i'm thinking about getting a new soundcard. is there a way to disable the onboard sound? as you could probably tell, i'm a newbie at this. any help would be greatly appreciated.

Manual page 3-16.
Enter bios, goto Integrated Peripherals, enter VIA OnChip PCI Device, disable VIA-3058 AC97 Audio.

Similar Messages

  • How to disable onboard video on KM4M-L?

    Does anybody know how to disable the onboard video card of the KM4M-L?  I tried just plugging in another AGP card, but it doesn't work.  I've gone through the bios, but can't find any reference to the onbard video.
    Another question I have is which card is faster, the onboard video or my old Viper V770 with 32MBs of ram (I know, it's ancient!)
    Thanks in advance for your help.

    The viper but not by much. The o/b AGP is disabled automaticly but your problem is your board only supports AGPx4/1.5v cards.
    Have a read through this thread (it's a P4 board but the same applies).

  • How to disable line/phono/mic in under playback

    /How to disable line/phono/mic in under playbackWHow to disable line/phono/mic in under playback? for the creative soundblaster SB240. Under windows xp under playback in sound settings I only see the usb speaker, and my laptops integrated sound card. Am I missing icons for the playback devices cause under the creative software I only see SPDIF in which I'm using and the line/phono/mic in which I muted. If I can't disable the line/phono/mic in, where in my settings could I prioritize the spdif in to being the default player because the only default player seems the be the SB240? Which is fine but when I go into its properties I see SPDIF in and Mic in/phono/line and I mute the line in. The reason I'm asking for how to disable the mic/line/phono in is because I WANT for my soundcard to only accept, listen, and playback through the SPDIF in channel. I currently disabled all the recording devices, and now creative only picks up SPDIF in and line in under playback which is fine but I would perfer only SPDIF in or if that isn't possible to make it the default input device that the sound card only listens to. Thanks for any assistance!!!!

    /How to disable line/phono/mic in under playbackWHow to disable line/phono/mic in under playback? for the creative soundblaster SB240. Under windows xp under playback in sound settings I only see the usb speaker, and my laptops integrated sound card. Am I missing icons for the playback devices cause under the creative software I only see SPDIF in which I'm using and the line/phono/mic in which I muted. If I can't disable the line/phono/mic in, where in my settings could I prioritize the spdif in to being the default player because the only default player seems the be the SB240? Which is fine but when I go into its properties I see SPDIF in and Mic in/phono/line and I mute the line in. The reason I'm asking for how to disable the mic/line/phono in is because I WANT for my soundcard to only accept, listen, and playback through the SPDIF in channel. I currently disabled all the recording devices, and now creative only picks up SPDIF in and line in under playback which is fine but I would perfer only SPDIF in or if that isn't possible to make it the default input device that the sound card only listens to. Thanks for any assistance!!!!

  • How to disable parent window while popup window is coming

    Hi,
    I am working on Oracle Applications 11i.
    I am able to get the popup window using the Java script in the controller.
    Please see the below code for the reference.
    String pubOrderId = pageContext.getParameter("orderId");
    StringBuffer l_buffer = new StringBuffer();
    StringBuffer l_buffer1 = new StringBuffer();
    l_buffer.append("javascript:mywin = openWindow(top, '");
    l_buffer1.append("/jct/oracle/apps/xxpwc/entry/webui/AddAttachmentPG");
    l_buffer1.append("&retainAM=Y");
    l_buffer1.append("&pubOrderId="+pubOrderId);
    String url = "/OA_HTML/OA.jsp?page="+l_buffer1.toString();
    OAUrl popupUrl = new OAUrl(url, OAWebBeanConstants.ADD_BREAD_CRUMB_SAVE );
    String strUrl = popupUrl.createURL(pageContext);
    l_buffer.append(strUrl.toString());
    l_buffer.append("', 'lovWindow', {width:750, height:550},false,'dialog',null);");
    pageContext.putJavaScriptFunction("SomeName",l_buffer.toString());
    But here the problem is, even though popup window is there, i am able to do the actions on the parent page.
    So how to disable the parent page, while getting the popup window.
    Thanks in advance.
    Thanks
    Naga

    Hi,
    You can use javaScript for disabling parent window as well.
    Refer below link for the same:
    http://www.codeproject.com/Questions/393481/Parent-window-not-disabling-when-pop-up-appears-vi
    --Sushant                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • How to Disable "Auto Align" in [System Pref.] - [Display] - [Arrangement]

    Does anyone know How to Disable "Auto Align" in [System Preferences] -> [Display] -> [Arrangement]?
    It always want to align the two screens from the top when they are lined up close together and I need them to be aligned from the bottom. Since the resolution heights are so close together (1080 & 1050) it does not allow one to align side by side from the bottom as it prioritizes top alignment.
    I guess I'm looking for a script to disable this feature.

    Anyone got any ideas?

  • How to disable the "turn page" event triggered by the scroll/swipe function?

    The problem is as follows.
    The default behaviour of Acrobat Reader (both stand alone and browser plug-in) is to allow scrolling/swiping with the mouse wheel/trackpad. This is useful when the pdf's page length is greater than the screen's own length, because you can read the pdf with no need to distract your attention from the text to the scrollbar button. However, the same scroll/swipe function turns into a usability problem when the pdf is embedded in a html page and the pdf's page length is smaller than the browser's length. In this case, the scroll/swipe turns the page, distracting your attention from the text to the unintended behaviour of the browser. What happens is that you are so used to scrolling/swiping that you did it unintentionally in the pdf's caption area. You really did not want to turn pages in the pdf. Furthermore, if the pdf takes the whole html page, being a website, the scroll/swipe function flips the website pages in ways that neither the reader nor the writer had ever intended. Hence the question. How to disable, in this case, the "turn page" event triggered by the scroll/swipe function? A JavaScript should do, but the SDK documents did not help so far...
    Message was edited by: 41457173
    Message was edited by: 41457173

    ... or release a patch for the API,
    ... or suggest an alternative route to achieve the intended result.

  • [Forum FAQ] How to disable Microsoft account default sign-in behavior when accessing Microsoft website on Windows 8.1

    Scenario
    By default it will sign in with current Microsoft account, if a user accesses Microsoft website (www.live.com, www.bing.com, etc.) with Microsoft account on Windows 8.1. This article describes how to disable this default sigh-in behavior if you want to use
    different Microsoft accounts every time. 
    Method
    To disable this default sign-in behavior, we can deny current Microsoft Account read permission of MicrosoftAccountTokenProvider.dll, please follow the following steps:
    Run Command Prompt with elevated permissions.
    Run the following command to take ownership of MicrosoftAccountTokenProvider.dll:
      takeown /f C:\Windows\SysWOW64\MicrosoftAccountTokenProvider.dll
    Run the following command to deny the read permission of the Microsoft:                                
     icacls C:\Windows\SysWOW64\MicrosoftAccountTokenProvider.dll /deny
    [email protected]:r                                                                                                                
    Note: Please replace your current Microsoft Account with the example
    [email protected]
    Change the owner of this file back to TrustedInstaller:
    Right-click MicrosoftAccountTokenProvider.dll under
    C:\Windows\SysWOW64\, choose Properties. Under
    Security tab, click Advanced.
    Click Change, in the box Enter the object name to select, type
    NT Service\TrustedInstaller.
    Click OK.
    Note: This operation would take some hours to work.
    Apply to:
    Windows 8.1
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

    Error: System cannot find the specified path
    I am getting this eroor
    Parashuram Singade www.distinctnotion.com

  • How to disable airplay mirroring on iPad with ios7

    How to disable airplay mirroring on iPad with ios7?

    I've had this problem ever since I was at my friend's house- she has Apple TV- and my iPad connected automatically. So, I have no idea why any of the practical solutions that people think of are not options BUT, in terms of just getting it done, I did figure out a way. The key for me was getting near another Apple TV. I was out of town so I took my iPad to another friend's house who also has TV. Once I was logged onto their wireless network (the same network that their Apple TV is on-- that's how it connected in the first place), then the Airplay icon and options showed up from the bottom-draw menu and I was able to make sure that mirroring was turned off from the Apple TV section and to make sure the selection was on iPad instead. Problem solved. Now whether or not this will stay the same (rather than me having to make sure it stays at this setting everytime I link up to a network that has an Apple TV on it) I don't know. So my advice is find someone with Apple TV and connect to their network with your iPad and then change it.

  • I have changed the apple ID (email, but on my iphone , the icloud is stil asking me to log in whit the old email.And it is poping-up on every 10 seconds.I never used icloud, and i dont want to use it.I just dont know how to disable the icloud.

    i have changed the apple ID (email) but on my iphone , the icloud is stil asking me to log in whit the old email.And it is poping-up on every 10 seconds.I never used icloud, and i dont want to use it.I just dont know how to disable the icloud.

    If you see that pop up you enabled icloud. Whether you want or do not want now to use it irrelevant until you actually disable activation lock.
    In order to do that you have to change your apple id back to do that just long enough to sign in and back out. System will ask you to verify, don't.
    Just sign in on the prompt you getting and then logout. Once done, change apple id to what you have now and verify. Then decide if you want to
    use icloud (who does not want to be able to track their phone if lost or stolen).

  • Can't use down key because it opens automator. Does any one know how to disable this short cut?

    Everytime I press down on down key it opens automator. It doesn't let me delete the app. I don't know what to do, it is very frustating to fill in a chart when I can't use the down key. Does any one know how to disable this short cut?

    Are you talking about the Down Arrow key? To my knowledge there is no way to use that key as a shortcut for anything. But look in the Keyboard section of System Preferences and the Keyboard shortcut tab.

  • I need to know how to disable my apps on my old system so that I can install them on new computer.

    I've just purchased a new iMac and need to know how to disable my apps on my old system so that I can install them on the new one.

    You are allowed to have two working installations so you do not have to disable the original if you prefer to have a backup.  Otherwise, to disable you can just sign out thru the CC manager.
    Creative Cloud Help / Sign out, Sign in | Creative Cloud desktop app
    http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  • How to disable a Entire row in a Matrix in Find Mode (User Form)

    Hi,
    How to disable a Entire row in a Matrix in Find Mode (User Form)
    Regards
    Jambu

    Hi,
       Iam using Bubble event = false in click event but the matrix row
    is allow to edit but we cant save the document in Find Mode That is fine.
    What is my actual requirement is In find mode matrix Row not allow to enter the data .
    For examble In ADD mode i enter the data in Three rows (Item Section - Matrix) and
    save the document. Whwn i open the document in find mode the three row is not allow
    to editable like the same functionality of PO, sales Order, etc ..
    Regards
    Jambu

  • HOW TO DISABLE THE VIEW OF CONTACT

    Hi
    I want to know how to disable contact view from a friend taking my phone
    exemple : If I give my cell phone blackberry 9900 to a friend for 1 day, I want for him the possibility to answer phone call and see who is calling him ! ,
    buy I want to disable any search in full contact list
    how to do this ?
    help,
    mail me back

    You cannot selectively lock the address book app. If all contacts are sync'd online you can delete the account. However, the all around better approach would be to backup the device and do a security wipe before loaning it.
    - Ira

  • How to disable size button in a JINternalFrame

    how to disable the middle button in a JInternalFrame
    the one between iconify button and close button
    thanx

    By reading the JInternalFrame API you will find what you need.

  • How to disable one check box when another is checked

    Hi, I'm a first time user.
    i am trying to make text fields appar and dissapaer when check boxes are ticked. but only alow one check box to be active at one time. 
    I am making a simple form in Acrobat pro 9,
    I have two check boxes Checkbox1 & Checkbox2.
    I have two text fields Textfield1 & Textfield2
    i have added actions to checkbox1 & checkbox2 to 'hide or show' the text fields.
    Action --> on focus (checkbox1) show/hide field (textfield1) is hide
    Action --> on focus (checkbox1) show/hide field (textfield2) is show
    oposite
    Action --> on focus (checkbox2) show/hide field (textfield2) is hide
    Action --> on focus (checkbox2) show/hide field (textfield1) is show
    problem 1 - how to disable checkbox1 when checkbox 2 is ticked.
    or disable checkbox2 when checkbox1 is ticked.  
    my other problem is that this action has the same effect for ticking or unticking the checkbox.
    thanks in advance to anyone who can help.
    can you please write your answer in simple terms. Basically this is the first time i have used acrobat pro so please dont assume any knowledge at all. thansk very much .

    First, I would experiment with just check boxes and learn their properties and how they can interact.
    Have you tried using the same name for 2 check boxes and assign a different "export value" to each check box.
    Have you looked at the values a check box or boxes have when checked or un-checked?
    Have you looked at how the various actions for a field work?

Maybe you are looking for