How to disable SSL V3 via GPO on a win2008R2 server

Hi everyone
because of this new Poodle threat involving SSL v3, I need to disable SLL v3 on our network, via Group policy.
There's plenty of post on how to do this ie
https://technet.microsoft.com/library/security/3009008.aspx
But the problem is, the option needed, isnt available!
II need to find the option Turn off Encryption Support .
I can do this using a local GPO, but as soon as I jump on the DC, and go to the same settings, its not there.
This is a Win2008 R2 server based network, running IE10 and IE11.
I've tried adding the GPO templates for both IE10 and IE11, but there appears to be no difference, the option is still missing,
anyone got any ideas?
thanks
G.

I updated the admx and adml files in my central store to IE 11 ones and it added the option. Hope that helps. http://www.microsoft.com/en-us/download/details.aspx?id=40905

Similar Messages

How to disable SSL v3 for sun os 5.6 (OAS 4.0.8), I am facing POODLE vulnerability issue?

my Website is hosted on Sun OS 5.06 (OAS 4.0.8) and using web server : Oracle_Web_Listener/4.0.8. Website is configured to use https for secure pages and it was working fine from last 10 years but suddenly i am getting complaints from my customers that they can not browse site on chrome version 40 and above and firefox 34 and above.
I searched for this issue and found that there is POODLE attack which may causing this issue. now the only solution i can see is to disable SSL v3 on server.
Can any help me out with the process or an idea, How to disable SSL V3 on this Olde server? its sun microsystem server.

Hi Aamir,
   This is old software, been a while since I saw one of these.
    Normally when SSL was setup there were two listeners, one with SSL and one without, in a different port, so you could try to find this second port, which may work without any need to change the configuration.
    Else, try to check on the OAS manager (Usually on port 8888), the HTTP listener -> WWW -> Network, if there is a setup only for the SSL port, you will need to add a new line, with the same configuration, but a different port and the security disabled.
    Also, there may be some setting on the application itself for the url path. If so, when you navigate in the application it will try to redirect you back to the SSL port. In that case you will need to figure out where to change that, which depend on the application itself.
   Found this page on google with the process to setup SSL on OAS 4.0, you need to do the inverse of step 5.
WoSign Support: SSL Certificates Installation Instruction - Oracle Web Server (OAS 4.0.8)
Regards,
Luis

How to disable SSL renegotiation in weblogic 10.3

Hi,
Can someone advise how to disable the SSL renegotiation in weblogic 10.3 server with jdk 1.6.0_35-b10 or 1.6.0_07-b06?
I tried to set up below properties when starting up weblogic server. But didn't work.
-Dweblogic.security.disableNullCipher=true -Dweblogic.ssl.AllowUnencryptedNullCipher=false -Dweblogic.security.ssl.enable.renegotiation=false -Dssl.debug=true -Dsun.security.ssl.allowUnsafeRenegotiation=false -Dsun.security.ssl.allowLegacyHelloMessages=false
Really appreciate if anyone can give any advise.

Thanks PratikS.
I tried to apply such patch in weblogic10.3.0. But got below NoSuchMethodError. Any idea? Any other patch needed?
<Jun 3, 2013 1:25:49 PM CST> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: java.lang.NoSuchMethodError:weblogic.protocol.ServerChannel.getConfig()Lweblogic/management/configuration/NetworkAccessPointMBean;
java.lang.NoSuchMethodError: weblogic.protocol.ServerChannel.getConfig()Lweblogic/management/configuration/NetworkAccessPointMBean;
at weblogic.security.utils.SSLContextManager.getChannelSSLContext(SSLCon
textManager.java:234)
at weblogic.security.utils.SSLContextManager.getSSLServerSocketFactory(S
SLContextManager.java:89)
at weblogic.server.channels.DynamicSSLListenThread.<init>(DynamicSSLList
enThread.java:59)
at weblogic.server.channels.DynamicListenThreadManager.createListener(Dy
namicListenThreadManager.java:289)
at weblogic.server.channels.DynamicListenThreadManager.start(DynamicList
enThreadManager.java:129)
Truncated. see log file for complete stacktrace
>

How to disable password complexity via command

hello
i have spent hours searching to find a command or script (powershell, cmd, VB, registry...) to disable group policy password complexity. few solutions has been delivered on the net but none of them works.
i wonder how what a pity if we can't do such simple thing in Microsoft windows
i really need that because i have created a script which contains many lines which automates windows customization which i always need in my classrooms for testing & teaching purposes
thanks in advanced

The answer is in your question: group policy password complexity. http://technet.microsoft.com/en-us/library/cc875814.aspx#ECAA
On a non-domain joined pc, this is governed by local policy.
Note that if your domain is on functional level 2008 or up, you can use fine grained password policies to have a different password policy on the systems your are deploying. http://technet.microsoft.com/en-us/library/cc770394(v=ws.10).aspx
There
is no (supported) way to change the password policy applied to a computer. That is intended in the design because password complexity is one of the keys to protect against bruteforce attacks.
Why wouldn't your script be able to handle password complexity rules? I would recommend tackling this in
your script, not in password policy.
MCP/MCSA/MCTS/MCITP
hi SenneVL
i don't understand your sentence: "Why wouldn't your script be able to handle
password complexity rules? I would recommend tackling this in your script, not in password policy."
i exactly need a way to disable password complexity via an script. what script can do that
? as far as i searched, no script

How to disable SSL Renegotiation

Hi All,
A security audit discovered one of our application's SSL termination, resides our ACE, supports SSL Renegotiation, which is, in their opinion, a security risk. As far I know, it is not supported to turn off this feature on ACE. Anyway, I want to be sure, before I reports this to the auditors. If you know, how to disable it, please share with me!
We are running 3.0(0)A4(2.2).
Regards,
Tamas

Thank you for your answer.
Our running version is A5(2.0). It should have rehandshake disabled by default.
Here are the outputs from some commands:
ACE# sh run | i rehand
Generating configuration....
ACE# sh parameter-map SSL_TERMINATION
Parameter-map : SSL_TERMINATION
Description : -
Type : ssl
    version                            : all
    close-protocol                     : none
    expired-crl                        : allow
    cdp-errors                         : reject
    authentication-failure any         : reject
    session-cache timeout              : disabled
    queue-delay timeout                : disabled
    Accepted cipher list:
      RSA_WITH_RC4_128_MD5 (priority:1)
      RSA_WITH_RC4_128_SHA (priority:1)
      RSA_WITH_AES_128_CBC_SHA (priority:10)
      RSA_WITH_AES_256_CBC_SHA (priority:1)
    rehandshake                        : disabled
    purpose-check                      : enabled
As you can see there is no configuration command to activate rehandshake.
So my question is if the rehandshake command only affects the ACE´s ability to do a rehandshake from its own side, but always lets the client do it if it wants to.
It isn't easy to find details about this. And the only place where I have found i little bit of details says "Enables rehandshake, allowing the ACE to send an SSL HelloRequest message to its peer to restart SSL handshake negotiation", so it might just be in that direction.
A followup question would be if it is possible to prevent the client from doing a rehandshake by a command in the ACE.
If this behaviour is not the intention this has to be a bug and I would go to the TAC with it.
I just want to know how the ACE is intended to work before I do that.
Best Regards,
/Torbjörn

How to install reader & patches via GPO?

I need to know the proper way to install Adobe Reader via GPO, as well as what to do about patches when they come out?
I have seen too many different ways online, I'd like an official way.
Thank you in advance.

This page should give you all the information you need, especially the Administration Guide: http://www.adobe.com/devnet-docs/acrobatetk/index.html

ILOM, how to disable SSL v2?

Hello
Is there any possibility to disable SSL v2?
I want to use HTTPS to connect to the server (Java Console) but it have to use SSL v3 only. Once trying to connect with v2 of SSL connection should not be established.
Is there any possibility to do this?
SP Firmware Version is: 3.0.3.20.e
SP Filesystem Version 0.1.22
Edited by: Luceks on Sep 2, 2009 4:28 AM

Hi.
You should have a SSL section under:
1) Log in to the ILOM-SP WEB interface.
2) Click --> Management --> SSL (or similar...)
3)
The SSL page appears. There're some sections to the SSL page.
One section includes targets and properties and you can configure the SSL settings displayed
in this section page (example):
**SSL**
State = Enabled | Disabled
Roles = Administrator | Operator | Advanced | (none)
Address = 0.0.0.0
Port = 0
4) Save settings page, to save any changes made to this section.
s.

How to disable ... via ARD?

I'd like to disable the following on all our client machines. Can anyone tell me the proper unix command via ARD?
1) Resume feature. Our teachers don't like programs re-opening when they login, and it also slows down initial startups.
2) Spotlight indexing - this occurs frequently on client machines and slows down performance.

Hi
To disable Resume system-wide:
defaults write NSGlobalDomain NSQuitAlwaysKeepWindows -bool false
There's a number of ways to completely disable spotlight indexing. One way is:
launchctl unload -w /System/Library/LaunchDaemons/com.apple.metadata.mds.plist
The above is all on one line. Both commands work as expected on 10.7 & 10.8. Not tried yet with 10.9. Send the commands as root and for good measure restart your clients.
HTH?
Tony

How to disable auto charge via usb?

So the question is as that: is it possible to disable auto charge when plugging iphone to the macbook in order to save the battery of macbook.
Tried everything but couldn't find any solution. Moreover it seems like I was questioned something like "permit to charge iPhone via usb?" when I first plugged it to the Mac, but I'm not sure
Thanks alot for any help!!

I am reasonably sure since there are no hidden menus to enable this.

How to disable ssl in messenger express

Our ssl cert is about to expire. We applied a new one yesterday
and it worked. But after a restart of the system, we could not
get the webmail working.
We have no time to investigate now. So it might be simpler
to disable the ssl in httpd, i.e. reverting to the original
http://our.mail.system
(instead of https://our.mail.system)
Note: right now
all
http:// are automatically switched to https://
Pls tell me to way to disable it
Thanks

In UWC set uwcauth.ssl.authonly=false in /var/opt/SUNWuwc/WEB-INF/config/uwcauth.properties file and restart web container.

Disabling Protected Mode via GPO?

Okay, this is getting so frustrating. I finally got a good working AIP of 10.0.1, but I'm still struggling to disable that pesky Protected Mode. That spash screen is confusing too many people. I can't find an option using the Adobe Customization Wizard to disable it. I did find code online to make a ADM for it though here: http://www.appdeploy.com/packages/detail.asp?id=1976 (in the notes section).
I thought I had it working. I imported it and was able to disable the spash screen through the new ADM menu. But after I closed the window, I wanted to double check that I got it all right and now it's all blank! I have the menu's, but no options to enable or disable. WTF is going on here? I'm ready to give up on this mess and roll back to version 9. Please help!!!!
Here is the code from that link to make it easier for some:
CLASS USER
CATEGORY !!YOUR_COMPANY_NAME_GOES_HEREHeader
CATEGORY "Adobe Reader 10"
CATEGORY "Preferences"
CATEGORY "General"
CATEGORY "Application Startup"
POLICY "Show splash screen"
KEYNAME "Software\Adobe\Acrobat Reader\10.0\Originals"
EXPLAIN !!ExplainNosplash
VALUENAME "bDisplayedSplash"
VALUEON NUMERIC 0
VALUEOFF NUMERIC 1
END POLICY
POLICY "Enable Protected Mode at startup"
KEYNAME "Software\Adobe\Acrobat Reader\10.0\Privileged"
EXPLAIN !!ExplainProtectedMode
VALUENAME "bProtectedMode"
VALUEON NUMERIC 1
VALUEOFF NUMERIC 0
END POLICY
END CATEGORY
END CATEGORY
CATEGORY "Identity"
POLICY "Organization Name"
KEYNAME "Software\Adobe\Acrobat Reader\10.0\Identity"
EXPLAIN !!ExplainOrgName
PART "Organization Name." EDITTEXT
VALUENAME "tCorporation"
END PART
END POLICY
END CATEGORY
CATEGORY "Internet"
CATEGORY "Internet Options"
POLICY "Connection speed"
KEYNAME "Software\Adobe\Acrobat Reader\10.0\AVGeneral"
EXPLAIN !!ExplainConnection
PART "Connection speed." DROPDOWNLIST REQUIRED
VALUENAME "iConnectionSpeed"
ITEMLIST
NAME "56kbps" VALUE NUMERIC 56000
NAME "LAN" VALUE NUMERIC 10000000 DEFAULT
END ITEMLIST
END PART
END POLICY
END CATEGORY
END CATEGORY
CATEGORY "Spelling"
CATEGORY "Dictionaries"
POLICY "Dictionaries"
KEYNAME "Software\Adobe\Acrobat Reader\10.0\Spelling"
EXPLAIN !!ExplainDictionary
PART "Default Dictionary" DROPDOWNLIST
VALUENAME "tDictionaryName"
ITEMLIST
NAME "English (United Kingdom)" VALUE "English (United Kingdom)"
ACTIONLIST
KEYNAME "Software\Adobe\Acrobat Reader\10.0\Spelling"
VALUENAME "iDictionaryDefaultID" VALUE NUMERIC 7
KEYNAME "Software\Adobe\Acrobat Reader\10.0\Spelling\cDictionaryOrder"
VALUENAME "t0" VALUE "English (United Kingdom)"
KEYNAME "Software\Adobe\Acrobat Reader\10.0\Spelling\cDictionaryOrderID"
VALUENAME "i0" VALUE NUMERIC 7
END ACTIONLIST
NAME "English (United States)" VALUE "English (United States)"
ACTIONLIST
KEYNAME "Software\Adobe\Acrobat Reader\10.0\Spelling"
VALUENAME "iDictionaryDefaultID" VALUE NUMERIC 2
KEYNAME "Software\Adobe\Acrobat Reader\10.0\Spelling\cDictionaryOrder"
VALUENAME "t0" VALUE "English (United States)"
KEYNAME "Software\Adobe\Acrobat Reader\10.0\Spelling\cDictionaryOrderID"
VALUENAME "i0" VALUE NUMERIC 2
END ACTIONLIST
END ITEMLIST
END PART
END POLICY
END CATEGORY
END CATEGORY
CATEGORY "Units"
POLICY "Page Units"
KEYNAME "Software\Adobe\Acrobat Reader\10.0\Originals"
EXPLAIN !!ExplainPageUnits
PART "Page unit" DROPDOWNLIST REQUIRED
VALUENAME "iPageUnits"
ITEMLIST
NAME "Points" VALUE NUMERIC 0
NAME "Inches" VALUE NUMERIC 1
NAME "Millimeters" VALUE NUMERIC 2 DEFAULT
NAME "Centimeters" VALUE NUMERIC 3
NAME "Picas" VALUE NUMERIC 4
END ITEMLIST
END PART
END POLICY
END CATEGORY
END CATEGORY
END CATEGORY
CATEGORY "Adobe Acrobat 10"
CATEGORY "Preferences"
CATEGORY "General"
CATEGORY "Application Startup"
POLICY "Show splash screen"
KEYNAME "Software\Adobe\Adobe Acrobat\10.0\Originals"
EXPLAIN !!ExplainNosplash
VALUENAME "bDisplayedSplash"
VALUEON NUMERIC 0
VALUEOFF NUMERIC 1
END POLICY
END CATEGORY
END CATEGORY
CATEGORY "Identity"
POLICY "Organization Name"
KEYNAME "Software\Adobe\Adobe Acrobat\10.0\Identity"
EXPLAIN !!ExplainOrgName
PART "Organization Name." EDITTEXT
VALUENAME "tCorporation"
END PART
END POLICY
END CATEGORY
CATEGORY "Internet"
CATEGORY "Internet Options"
POLICY "Connection speed"
KEYNAME "Software\Adobe\Adobe Acrobat\10.0\AVGeneral"
EXPLAIN !!ExplainConnection
PART "Connection speed." DROPDOWNLIST REQUIRED
VALUENAME "iConnectionSpeed"
ITEMLIST
NAME "56kbps" VALUE NUMERIC 56000
NAME "LAN" VALUE NUMERIC 10000000 DEFAULT
END ITEMLIST
END PART
END POLICY
END CATEGORY
END CATEGORY
CATEGORY "Spelling"
CATEGORY "Dictionaries"
POLICY "Dictionaries"
KEYNAME "Software\Adobe\Adobe Acrobat\10.0\Spelling"
EXPLAIN !!ExplainDictionary
PART "Default Dictionary" DROPDOWNLIST
VALUENAME "tDictionaryName"
ITEMLIST
NAME "English (United Kingdom)" VALUE "English (United Kingdom)"
ACTIONLIST
KEYNAME "Software\Adobe\Adobe Acrobat\10.0\Spelling"
VALUENAME "iDictionaryDefaultID" VALUE NUMERIC 7
KEYNAME "Software\Adobe\Adobe Acrobat\10.0\Spelling\cDictionaryOrder"
VALUENAME "t0" VALUE "English (United Kingdom)"
KEYNAME "Software\Adobe\Adobe Acrobat\10.0\Spelling\cDictionaryOrderID"
VALUENAME "i0" VALUE NUMERIC 7
END ACTIONLIST
NAME "English (United States)" VALUE "English (United States)"
ACTIONLIST
KEYNAME "Software\Adobe\Adobe Acrobat\10.0\Spelling"
VALUENAME "iDictionaryDefaultID" VALUE NUMERIC 2
KEYNAME "Software\Adobe\Adobe Acrobat\10.0\Spelling\cDictionaryOrder"
VALUENAME "t0" VALUE "English (United States)"
KEYNAME "Software\Adobe\Adobe Acrobat\10.0\Spelling\cDictionaryOrderID"
VALUENAME "i0" VALUE NUMERIC 2
END ACTIONLIST
END ITEMLIST
END PART
END POLICY
END CATEGORY
END CATEGORY
CATEGORY "Units"
POLICY "Page Units"
KEYNAME "Software\Adobe\Adobe Acrobat\10.0\Originals"
EXPLAIN !!ExplainPageUnits
PART "Page unit" DROPDOWNLIST REQUIRED
VALUENAME "iPageUnits"
ITEMLIST
NAME "Points" VALUE NUMERIC 0
NAME "Inches" VALUE NUMERIC 1
NAME "Millimeters" VALUE NUMERIC 2 DEFAULT
NAME "Centimeters" VALUE NUMERIC 3
NAME "Picas" VALUE NUMERIC 4
END ITEMLIST
END PART
END POLICY
END CATEGORY
END CATEGORY
END CATEGORY
END CATEGORY
[strings]
YOUR_COMPANY_NAME_GOES_HEREHeader=YOUR_COMPANY_NAME_GOES_HERE Custom Policies
ExplainNosplash="When disabled, the program will not display a splashscreen on startup.\n\nWhen enabled, the splashscreen will be displayed."
ExplainProtectedMode="When disabled, the program will not run in Protected Mode.\n\nWhen enabled, Protected Mode will run, and may cause compatibility errors.\n\nSee http://kb2.adobe.com/cps/860/cpsid_86063.html for more details."
ExplainOrgName="Enter the organization name by typing it in."
ExplainConnection="To specify LAN, set the connection speed to 10000000."
ExplainPageUnits="Set the page unit from the drop-down list.\n\nThe default is millimeters."
ExplainDictionary="Used to specify the default dictionary to spell checking."

OMG I'm going cross-eyed over here. I got it. At first I had to change one of the filter options for those menu's; I didn't realize that didn't stick and that was why I wasn't seeing those options after closing and re-opening the app. Ug...

How to disable GUI from dispalying from CentOS to X server (XManager 3)

i have a RAC system installed and normally login to both boxes remotely using my laptop, at some point i wanted to install the listener using a GUI so i decided to use XManager3 but had problems connecting, so i decided to install the listener on the box itself but now i have a problem because when a run the netca command i get an error
Error:#
xlib: connection to "0.0" refused by server
Xlib: No protocol specified
java.lang.NullPointerException
at oracle.ewt.lwAWt.BufferedApplet.<init>(Unknown Source)
at oracle.net.ca.NetCA.<init>(Unknown Source)
at oracle.net.ca.NetCA.<init>(Unknown Source)
Oracle Net Services configuration failed. The exit code is -1
how can i disable X server on my host, because the problem is, when i run the netca command on my host (linux1) it is looking to display it on the X server whereas i just want it to display the GUI from the host console

oh my, another X question.
setup an X server on your local machine (like Xming) or use MAC or linux, and use ssh -X to tunnel X.
the ssh daemon will arrange the DISPLAY, no manual intervention is needed after logging in using ssh -X.

How To Copy and run files Via GPO

HI All,
Our Domain got 300 PC's and UltraVNC is installed. Now i need to enable the MS Logon and add Security Groups.
I have export the VNC Ini file from Working computer.
also export the ACL into txt file
Exporting an ACL
MSLogonACL /e file (vnc.txt)
I have test by coping the ini file and run the ACL . Found All OK
MSLogonACL /i /a file
(vnc.txt)
"%ProgramFiles(x86)%\UltraVNC\MSLogonACL.exe" /i /o \\server\softwareshare\ultravncserver
\vnc.txt
So how do i do this via GPO?
AS

Hi,
I agree with Martin. We can run the script as a batch file. Before we deploy the script via group policy, we need to test it on a machine to see if it can run properly.
Besides, regarding how to utilize group policy to assign startup scripts, the following article can be referred to for more information.
Assign computer startup scripts
http://technet.microsoft.com/en-us/library/cc779329(v=WS.10).aspx
TechNet Subscriber Support
If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback here.
Best regards,
Frank Shen

How to disable Internet Options using Group Policy Object?

Dear everybody,
Please tell me about how to disable Internet Options via group policy to Internet Options on Tool menu, Internet Options on Control Panel and Command control inetcpl.cpl?
kea

Hi,
The location of this GPO in Windows Server 2008 should be:
User Configuration\Administrative
Templates\Windows Components\Internet Explorer\Browser menus
Enable the Group Policy “Tools
menu: Disable Internet Options… menu option”
Hope that helps.
Regards,
Leo Huang
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

How to disable sslv2 on windows server 2008 r2

we are getting alerts from our third party application regarding the vulnerability error in our doamin.they mentiojn the following vulnerability message
Abp

https://www.sslshopper.com/article-how-to-disable-ssl-2.0-in-iis-7.html
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

How to disable SSL V3 via GPO on a win2008R2 server

Similar Messages

Maybe you are looking for