How to disable sslv2 on windows server 2008 r2

we are getting alerts from our third party application regarding the vulnerability error in our doamin.they mentiojn the following vulnerability message
Abp

https://www.sslshopper.com/article-how-to-disable-ssl-2.0-in-iis-7.html
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Similar Messages

Issue with disabling teredo with Windows Server 2008(non R2)

Hello,
I am not able to disable teredo on Windows Server 2008 (non R2) .When I try to run the same set of commands on Windows Server 2008 R2 it works fine.I have followed the instructions as in the below link
http://technet.microsoft.com/en-us/library/cc770710(v=ws.10).aspx
C:\Windows\system32>netsh interface teredo show state
Teredo Parameters
Type                    : client
Server Name             : teredo.ipv6.microsoft.com.
Client Refresh Interval : 30 seconds
Client Port             : unspecified
State                   : offline
Error                   : client is in a managed network
C:\Windows\system32>netsh interface teredo set state disabled
Ok.
C:\Windows\system32>netsh interface teredo show state
Teredo Parameters
Type                    : client
Server Name             : teredo.ipv6.microsoft.com.
Client Refresh Interval : 30 seconds
Client Port             : unspecified
I have also tried changing the below registry to disable teredo , that didnot work as well.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip6\DisabledComponents DWORD value set to 8.But the teredo status for the netsh command remains the same even after reboot.
When I try to disable the 6to4 or isatap it works fine.I have checked in device manager ->network adapters with show hidden devices enabled, but I dont see teredo adapter even when teredo is enabled as per netsh.Also I dont see teredo adapter in add
legacy hardware- > network adapters - > Microsoft devices , but I see isatap and 6to4 adapters in there.
Can someone please help me..
Thanks in Advance

Hi,
In device manager, add legacy hardware, install Teredo adapter, update the drivers. Reboot and check if you can modify the status.
If this failed, reset tcp/ip stack.
http://support.microsoft.com/kb/299357
Hope this helps.

How to merge partitions in Windows Server 2008 quickly and effectively?

How to merge partitions in Windows Server 2008 quickly and effectively?

Hi,
In Windows systems we can only extend a partition to unallocated space behind it - so if we have 2 consistent partitions, we can only delete the second one and extend the first one.
If the 2 partitions are on 2 different disks, you can also create a spanned volume - you will still need to delete the second partition and convert both disks to dynamic disk to create the spanned volume.
If you have any feedback on our support, please send to [email protected]

How to install IE8 on Windows Server 2008 R2 Datacenter?

Hello.
Can anybody tell me, how to install IE8 on 2008 R2 Datacenter?
I've downloaded this http://www.microsoft.com/en-us/download/internet-explorer-8-details.aspx for "Windows Server 2008 64-bit and more..", removed IE11, IE10, IE9 from installed updates, and runned "dism /online /disable-feature
/featurename:Internet-Explorer-Optional-amd64".
And nothing helps. I've got a message "Internet Explorer 8 is not supported on this operating system".

you can't "install" IE8 on WS2008R2, nor on Windows7 - because those OS's shipped with IE8.
IE is an OS component, and so when you "upgrade" or "downgrade" IE, you are affecting an OS component.
What this means is that the "IE8" download you are trying to apply, is actually IE8 for WinXP or maybe WinVista.
You can usually "downgrade" Win7 back to IE8, by uninstalling the newer "upgrade" of IE - this causes the OS to automatically attempt to revert to the prior IE version.
This reversion assumes/requires a healthy OS and component store (CBS), including all the pkgmgr file needed to revert to component.
Sometimes, the component store is damaged, or is missing files.
you may need to check the CBS logfiles, and may need to perform SFC /scannow
You may need to use CheckSUR to repair system health.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

How to enable hibernation in Windows Server 2008 R2

Hi
I am using Windows Server 2008 R2. I want to enable hibernation on server 2008 R2. I have checked the feature in power options but it dose not show any option for sleep & hibernation. I have tried to enable from command prompt by using powercfg -h on
but getting error message that this feature is not supported by firmware. I have updated the firmware but still getting same error.
Also checked with powercfg /energy & getting given below errors.
Platform Power Management Capabilities:System firmware (BIOS) does not support S3.
The hardware in this computer does not support the S3 sleep state.
Platform Power Management Capabilities:System firmware (BIOS) does not support S4 (Hibernate).
The hardware in this computer does not support the S4 (Hibernate) state.
Platform Power Management Capabilities:PCI Express Active-State Power Management (ASPM) Disabled
PCI Express Active-State Power Management (ASPM) has been disabled due to a known incompatibility
with the hardware in this computer.
Can anyone suggest me how can I enable hibernation on windows server 2008 R2 64 bit.
Thanks.

Hello,
I hate to suggest the obvious, but i'd say your hardware does not support sleep or hibernate.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Disable OCSP in Windows Server 2008 / IIS7

Is it possible to disable OCSP Stapling on Windows Server 2008 / IIS7?
The problem is that
FF30 does not allow access to a secure site if the server supports OCSP Stapling and the user's computer time is in the past. The error is sec_error_ocsp_future_response. So users are not able to access our site simply because their time is incorrect!
If they don't report the error to us, we can't tell them what to do about it and we lose customers. So we need to disable OCSP Stapling.
I've tried these thing with no luck:
add RequestOCSP of type DWORD and set it to
0 to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\Kerberos\Parameters\
certutil –setreg chain\ChainCacheResyncFiletime @now
certutil -urlcache ocsp delete
OCSP Stapling is commonly disabled (for example,
sites such as amazon and google disable it). Please let me know how to disable
OCSP Stapling on IIS7.

Hi, please check on iis.net's forum. You will have a bigger audiance than there. I unfortunaly cant move the thread there.
Thanks you for your understanding
Regards, Philippe
Don't forget to mark as answer or vote as helpful to help identify good information. ( linkedin endorsement never hurt too :o) )
Answer an interesting question ? Create a
wiki article about it!

How to enable javascript in windows server 2008 R2 enterprise ?

Hi all,
Hope doing well,
sir i am using windows server 2008 R2 enterprise operating system.
i am running my web application in localhost. it's working fine.
but i have used timer using javascript and some javascript function that is not working in this application.
i googled many thing and i got one solution that is http://njbblog.blogspot.in/2010/02/issue-windows-server-2008-javascript.html
i went through this link and i have done the solution but in my another system has the same configuration and same thing i am doing there but it's not
enabled javascript and my application is not working.
plz help me. it's urgent
waiting for reply.
thanks in advance.
vicky Bangalore

Hi Vicky,
Please make sure that the Javascript is enabled on you IE.
To do this, please go to Control Panel->Internet
Options, click on security tab,
click on customer level button. Please scroll
down to Scripting, underScripting
of Java applets, click enable.
OR
Please try to start the Internet Explorer with option "Run as Administrator" to see whether it works.
Regards,
Rafic
If you found this post helpful, please give it a "Helpful" vote.
If it answered your question, remember to mark it as an "Answer".
This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing!

How to install epm on window server 2008 sp2

Please , provide me some help - I am using window server 2008 sp2 and oracle 10g and hyperion 11, but I want to know the system requirements and steps to install EPM.
regards
Amit

Everything you need is at http://docs.oracle.com/cd/E17236_01/nav/portal_1.htm
Cheers
John
http://john-goodwin.blogspot.com/

HOW TO INSTALL SAP Business One to Windows Server 2008

Hi everybody, anyone can help me how to install SAPB1 in windows server 2008? last night i try to install SAPB1 to my sever windows 2008 but after installation i cannot find for the shortcut SAP business one in my desktop but usaully in default installation can create shortcut to the destop. in windows server 2003 there is no problem in the installation? and also it is support windows server 2008? when i try SAP popup notice that my MSQL is outdated... please help me...thanks...

Dear Raffy,
unfortunetly SAP B1 is still not supported under Windows Server 2008.
For further information about supported plataforms please refer to
the following site:
https://service.sap.com
> SAP Channel Partner Portal ¦ Existing Users - Login
> Solutions ¦ SAP Business One
> Product Availability
> Supported Platforms
Best regards,
Tomas Black

Install ASM On Windows server 2008

Hi all Nice Evening, i want to know how to install asm on windows server 2008 step by step guide.

Hi,
http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/storeman.htm#sthref1648
Please use the above link to check the step by step configuration
Regards,
Taj

Update windows server 2008 r2 to service pack1

how we can update the windows server 2008 r2 to windows server 2008 r2 service pack 1
with consideration that I already have active directory in this server
i don't find any documentation for updating windows server 2008 R2 to windows server 2008 r2 service pack 1

Hello,
The Windows Desktop Perfmon and Diagnostic tools forum is to discuss performance monitor (perfmon), resource monitor (resmon), and task manager, focusing on HOW-TO, Errors/Problems, and usage scenarios.
Since your post is off-topic, I am moving it to the
off topic forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

IE 9 downgrade to IE 8 Windows Server 2008 R2 x64

Hello.
I try to downgrade IE on my windows server 2008 machine. I start with this: http://support.microsoft.com/kb/957700#stepsforwin2008r2 , there is howto for IE 8,
but I using it for IE 9, propably there was my mistake...
After that command (dism /online /Disable-Feature /FeatureName:Internet-Explorer-Optional-amd64) I don't have IE 9 and try to install IE 8, but i got error:
After this step i realize, that somewhere must be some IE 9 components still be, i start search and find that on Control Panel\Programs\Programs and Features\Installed Updates
was IE 9 and I uninstall it. (After all operations I restarted machine)
Now I can't install IE 8 (it have same error what before), and don't get/can't install IE 9.
In folder C:\Program Files\Internet Explorer and C:\Program Files (x86)\Internet Explorer
I got files:
Is some way to get IE 8 or at least IE 9?
Thanks!
On this thread is some discusion about this: http://social.technet.microsoft.com/Forums/en/winserversetup/thread/68e0da1e-75b9-42e6-a832-d7bb6dc580c7

Enable IE 8 on Win2k8 R2:
Open the Command Prompt as administrator and run the following commands.
To Enable IE on Windows Server 2008 R2 version -- run the following command
dism /online /Enable-Feature /FeatureName:Internet-Explorer-Optional-amd64
To Disable IE on Windows Server 2008 R2 version -- run the following command
dism /online /Disable-Feature /FeatureName:Internet-Explorer-Optional-amd64
You need to restart the server after executing these commands.
To uninstall/disable IE check the following KB
This is what I ran at system32 prompt after uninstalling IE9 from programs\features
dism /online /Enable-Feature /FeatureName:Internet-Explorer-Optional-amd64
This does not work on my server, says Error:0x800f080c
Feature name Internet-Explorer-Optional-amd64 is unknown.
A Windows feature name was not recognized.

How Do i disable ""enable advance Printing features on windows server 2008 ""

Hi ,
I have a windows server 2008 which is used as a terminal server . Users at remote locations log on to this server via "" DYNDNS"" to user our ERP and company files. We use ""DOT MATRIX PRINTERS "" to print . As we all know that ""enable advance
printing feature"" is checked by default on windows server 2008 the format of our ""DOT MATRIX PRINTOUTS "" CHANGE which creates a big mess.
I would like to know if there is any way where i can disable this feature permanently.

In previous operating systems, that setting was for designed for disabling and enabling GDI rendering on the server. Since you are using a TYPE 4 print driver, there is no GDI rendering and thus this setting is not configurable.
If you would like to change this setting, you will need to use a TYPE 3 print driver that does not use XPS rendering. Then the previous configuration methods you were using will work.
Alan Morris Windows Printing Team

How to restrict users working on Windows 7 clients from accessing Windows Explorer and other systems in the network through Group Policy with a domain controller running on Windows Server 2008 r2

Dear All,
We are having an infrastructure setup of around 500 client computers managed through group policy.
Recently the domain controllers have been migrated from Windows Server 2003 to Server 2008 R2.
Since this account requires extremely strict environment, we need to figure the solution for restricting the users from access anything locally.
It would be great if you can assist me with the following query.
How to restrict users logged on Windows 7 clients from accessing Windows Explorer and browsing other systems in the network through Group Policy with a domain controller running on Windows Server 2008 r2 ?
Can we disable Network Tab on the left hand pane ?
explorer.exe is blocked already, but users are able to enter the Windows Explorer by clicking on the name which is visible on the Start Menu.

>   * explorer.exe is blocked already, but users are able to enter the
>    Windows Explorer by clicking on the name which is visible on the
>    Start Menu.
You cannot block explorer.exe when you do not replace the shell - the
desktop you see effectively IS explorer.exe...
Your requirement sounds like you need a custom shell:
http://gpsearch.azurewebsites.net/#2812
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

How to install Windows Server 2008 (dualboot) on a PC with Windows 8.1 already on it?

Hi, I bought a new PC with preinstalled Windows 8. Now I need to install Windows Server 2008. Anyone can advise me how to
do it? It has to be in dual boot, in Virtual Machine the display is way too small

You should check out the Boot-to-VHD capability.
Here is how we do it in a lab environment which we got from a Microsoft lab:
-Verify your computer is running Windows 7 or later.
-Verify you have full administrator rights to your currently installed operating system.
-Verify hard disk encryption or other pre-boot security is turned off.
-Confirm that hardware virtualization technology and memory protection are both enabled in your computer's BIOS setup.
Now we just setup the a VHD with an operating system on it (can even use a downloaded server 180 day trial VHD if you are in a rush). Then go to Disk Management and select Attach VHD and point to the file. Note the drive letter that is assigned to the
mounted VHD.
Run a command prompt as administrator and type: " bcdedit /export BCDBackup.bak " to create an exported backup of your boot loader configuration. Now type bcdboot [drive]:\windows.
Now to test your dual-boot configuration, restart your computer and select the new OS boot option.
An optional last step would be when complete to restore your boot loader by running "bcdedit /import BCDBackup.bak" and delete any VHD files.
A more detailed guide written for Windows 7 but still applies for Windows 8 can be found at:
http://technet.microsoft.com/en-us/video/windows-7-boot-from-vhd.aspx
Hope that helps.

How to disable sslv2 on windows server 2008 r2

Similar Messages

Maybe you are looking for