How to disable the annoying security warning for all users in Windows Server 2008 R2

Hi,
The employees from the administration complain all the time about the different types of security warning that they get when trying to run some applications which are used frequently.
Since the number of the users is too big it is unfeasible to go through all the users and disable the User Access Control at their account settings.
Is it possible to achieve this through given account policy settings. I want to perform the changes on the server so it applies to *all* (or maybe those of Administration department) users.
One useful information here can be the following: we use 2 different severs, the application which cause the errors are in the terminal server, and the users are in the main server. Where should I perform the changes?
Best,
D

Hiya,
It could sound like that one indeed. There are a few options to go for, however it should be fairly easy to find out :)
Create a test GPO and apply to a limited amount of users. GPUpdate and verify that the GPO has been applied using rsop.msc
Then open the application to test and see if it has the desired effect. You might need to change more than one setting, depending on the application and desired behavior.

Similar Messages

  • How do I disable the itunes auto-update for all users?

    I need to know if there is a way to disable the auto-update feature for all users that login to a windows XP computer.
    I have disabled it for the account currently logged in as well as copy that user profile to the "default user" profile. However I have about 300 users that do not have admin rights that still get prompted to install updates.
    Is there a way to disable the auto update as the default for all users. So that only I get the auto update notifications?

    Bump -
    No responses in over a week?
    Does no one else run a network where users don't have admin rights?

  • How to set the same General settings for all users

    Hi Experts,
    How can i set the same general settings for all users e.g. marking the checkbox "Display header" to true for all users? General settings are possible under User Settings Button.
    Regards,
    Arti.

    Hi Arti!
    You can default user settings in a PFCG role, in the "personalization" tab.
    If you have a PFCG role that is common to all your users, you can set the default values here.
    However it does not prevent them to change these settings later, except if you modify the "user settings" fields properties in cProjects application.
    Matthias

  • Unable to change keyboard layout for all users on Windows Server 2012 R2

    Hi,
    I have a requirement where I need to support national keyboard layout for Danish for all users on that machine. When I ran the powershell with script Set-WinUserLanguageList
    -LanguageList da-DK it only sets the Danish keyboard layout to the specific logged in user.However the for other users its same English(US) keyboard which is not expected.
    Please help me how to set the Danish keyboard for all users on the machine. Its Urgent!Thanks

    Hi Mike,
    Thanks for reply.
    But I need to configure everything using powershell script. Is it possible to use powershell script to setting group policy/ adding logon script ?
    These are pretty basic administration tasks and almost always quicker to accomplish with the GUI. Why do you want to use a PowerShell script?
    EDIT: Here's some information on the topic however:
    https://technet.microsoft.com/en-us/library/cc781361%28v=ws.10%29.aspx
    http://blogs.technet.com/b/heyscriptingguy/archive/2011/01/06/use-powershell-and-group-policy-for-your-logon-script.aspx
    Don't retire TechNet! -
    (Don't give up yet - 13,225+ strong and growing)

  • How to diable delete button in PO for all users excepting one

    Dear All
    Please guide how to disable delete button in PO for all users excepting only one.
    Thanks

    Hi,
    check following link
    [Disable fields at item level in ME22N;
    [Disable Delete Button;
    Regards
    Kailas Ugale

  • How to use the same POWL query for multiple users

    Hello,
    I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
    "Query 'ABC' is already open in another session."
    where 'ABC' is the query name.
    Can you please tell me how to use the same POWL query for multiple users ?
    A fast reply would be highly appreciated.
    Thanks and Regards,
    Sandhya

    Batch processing usually involves using actions you have recorded.  In Action you can insert Path that can be used during processing documents.  Path have some size so you may want to only process document that have the same size.  Look in the Actions Palette fly-out menu for insert path.  It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..

  • HT1660 how can I use one single library for all users on the same laptop?

    how can I use one single library for all users on the same laptop?

    You are most of the way there. Each user having access to hard drive is the key. If users are limited in file privileges this is harder.
    Any files you add to your library and any files she adds to her library are available to the other. Just not automatically. Each user must add the files to their own library using the add file or add folder option from menu bar.
    What I have done is set library location to a location outside of My Documents\My Music. On my network storage I have a folder names s:\itunes. Both accounts iTunes are set to use this location for the library.

  • How to hide the Columns and Views for Login user in SharePoint 2013

    Hi Friends,
    How to hide the Columns and Views for Login user in SharePoint 2013? Is it possible using OOB features? If not possible how can we hide the Columns and Views for Login user?
    Could you please help on this.
    Thanks,
    Tiru
    Tiru

    Hello Tirupal,
    There is no OOB way to do this.
    Please check this codeplex solution to achieve the same.
    https://sp2013columnpermission.codeplex.com/
    My Blog- http://www.sharepoint-journey.com|
    If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

  • How to change the UWL refresh rate for all portal users.

    Hi Portal Experts,
    How to change the UWL refresh rate for all portal users?
    Users can individually change the refresh rate through "Personalise View" in UWL.But we want this to set it for all users(we have 10k portal users).
    It was defaultically set to 5 mins for all users.How to change this to 20 mins.
    Thanks
    Sony.

    1.      Launch the UWL iView configuration page.
    You can access the iView from the UWL administration pages (System Administration ® System Configuration). Navigate to the property editor as follows:
          From the Universal Worklist Systems, choose the system for which you want to edit the properties.
        Choose Edit.
    may be you can get clear help from below help file
    http://help.sap.com/saphelp_nw04s/helpdata/en/eb/101fa0a53244deb955f6f91929e400/frameset.htm
    regards
    nagaraju

  • How to allow pop-ups in Safari for all users

    How do you allow Safari pop-ups for all users? After rolling out 50 Mac OSX with Safari comes default with Safari pop-ups disabled, now I must allow pop-ups for all users logging in.
    Good day!

    Do you have an Exchange (e.g. a work) email account set up on the iPad ? If you do then it's possible that the account profile is preventing you turning popups 'on', in which case you would need to contact the email account administrator

  • How can I install and activate extensions for all users

    Hi, within the version 7.0.1 I am able to install noscript extension for example for all users.
    With version 8.0 the extensions are disabled by default, so I do not install it on company computers.
    How can I manage extensions and settings for all users in 9.0?
    Best regards
    Jens

    Hi John,
    I appreciate your prompt response.
    We have an Australian client here in the Philippines and would want to purchase an adobe software under Creative Cloud Licensing.
    Since this type of licensing is not yet available here in the Philippines, they are suggesting that they can purchase it in their country.
    My main concern is, will there be any conflict upon installing/activating an adobe software under Creative Cloud which will be purchased from their country?
    And what are the steps for installing and activating a software under this type of license.

  • How do I install an Add-on for all users

    I wish to user the FoxFilter addon to prevent users from visit all websites, except a whitelist. This addon works fine. I just need the addon to work for all users on the computer. Not just the one the addon was installed for. Can this be done and if so, how?

    This is very possible and you can do it in few very steps.
    <br/><br/>1-First you have to download the xpi add-on file instead of installing it.
    <br/><br/>2-Use the following command at the run prompt (type Windows + R): firefox -install-global-extension
    <br/><br/>For example if your downloaded xpi add-on is on C:\Users\Simon\Downloads\
    <br/><br/>Then you write firefox -install-global-extension C:\Users\Simon\Downloads
    <br/><br/>Note : The addon will be normally available where every addon is. Keep in mind that only administrators can uninstall it.
    Have a nice day
    Sincerely,
    Ahmed Nefzaoui

  • How to uninstall a specific sideloaded app for mutiple users from windows 8.1 through windows power shell?

    I have sideloaded a windows 8.1 app for mutiple
    users in the device using the following command in windows power shell:-
    DISM /Online /Add-ProvisionedAppxPackage /PackagePath:”packagepath” /SkipLicense
    Now i want to un-install the same app for mutiple
    users in windows 8.1 since i want to install latest package of that app but i am not able to un-install the app for mutiple
    users in windows 8.1 using windows power shell
    This is what i have tried :-
    DISM.exe /Online /Remove-ProvisionedAppxPackage /PackageName: "PackageFullName"
    This what the error i am getting:-
    Deployment Image Servicing and Management tool
    Version: 6.3.9600.17031
    Image Version: 6.3.9600.17031
    Error: 2
    The system cannot find the file specified.
    The DISM log file can be found at C:\Windows\Logs\DISM\dism.log
    Am i missing anything ??
    1)How to un-install a specific app for mutiple users in windows 8.1 using windows power shell??????
    2)What are the variousways/Alternatives to un-install a specific app for mutiple users in windows 8.1 using windows power shell??????
    Please let me know
    Looking forward for your response
    Thanks in advance

    I am getting the same error, though I have verified the package name is correct. I am trying to uninstall the Reader App from a captured WIM (offline). Any suggestions?
    dism /image:c\mount Get-ProvisionedAppxPackage Result:
    DisplayName : Microsoft.Reader
    Version : 2013.822.1823.785
    Architecture : neutral
    ResourceId : ~
    PackageName : Microsoft.Reader_2013.822.1823.785_neutral_~_8wekyb3d8bbwe
    Attempt to remove the app returns this same error message:
    C:\WINDOWS\system32>dism /image:c:\mount /remove-provisionedappxpackage /Package
    Name:Microsoft.Reader_2013.822.1823.785_neutral_~_8wekyb3d8bbwe
    Deployment Image Servicing and Management tool
    Version: 6.3.9600.17031
    Image Version: 6.3.9600.17031
    Error: 2
    The system cannot find the file specified.
    The DISM log file can be found at C:\WINDOWS\Logs\DISM\dism.log
    The error is accompanied by the following entries in the error log:
    2015-04-14 12:44:53, Error                 DISM   DISM Appx Provider: PID=9000 TID=8104 Failed to get staged packages for package 'Microsoft.Reader_2013.822.1823.785_neutral_~_8wekyb3d8bbwe'.
    - CPackageAdapter::CreateForRemove(hr:0x80070002)
    2015-04-14 12:44:53, Error                 DISM   DISM Appx Provider: PID=9000 TID=8104 Failed while initializing package adapter for package 'Microsoft.Reader_2013.822.1823.785_neutral_~_8wekyb3d8bbwe'
    - CAppxManager::RemoveAllUserAppx(hr:0x80070002)
    2015-04-14 12:44:53, Error                 DISM   DISM Appx Provider: PID=9000 TID=8104 Failed to remove package 'Microsoft.Reader_2013.822.1823.785_neutral_~_8wekyb3d8bbwe'
    - CAppxManager::ProcessCommandRemoveAllUserAppx(hr:0x80070002)
    2015-04-14 12:44:53, Error                 DISM   DISM Appx Provider: PID=9000 TID=8104 Failed processing command to remove Appx package - CAppxManager::ExecuteCmdLine(hr:0x80070002)

  • How do you make Motion templates availabe for all users for FCPX?

    How do you make Motion templates availabe for all users for FCPX?

    Copy your Motion Templates folder that is in your Movies folder to the movies folder of your other users.

  • How to set mozilla firefox homepage for all users in windows 7?

    I want to set same homepage for all users in windows 7.

    You can use a mozilla.cfg file in the Firefox program folder to lock prefs or specify new (default) values.
    Place a local-settings.js file in the defaults\pref folder where also the channel-prefs.js file is located to specify using mozilla.cfg.
    pref("general.config.filename", "mozilla.cfg");
    These functions can be used in the mozilla.cfg file:
    defaultPref(); // set new default value
    pref(); // set pref, but allow changes in current session
    lockPref(); // lock pref, disallow changes
    See:
    *http://kb.mozillazine.org/Locking_preferences
    *http://mike.kaply.com/2012/03/16/customizing-firefox-autoconfig-files/

Maybe you are looking for

  • Aurora update wont install

    Aurora is trying to install update 30.0a2. It downloads a 3.4 mB file but the install fails. It then downloads the 36mb file which still wont install. If I try and download from scratch I run the file firefox-30.0a2.en_US.win32.installer-stub.exe. Wh

  • Using WEBADI with Oracle Oepn Office 3.1

    My client has ask if WEBADI will work with any other product other than MicroSoft Excell. They would like to use Oracle Open Office 3.1 if possible.

  • Adding a second IMAP Account

    I now have a new Gmail account, and wanted to set it up as IMAP in Mail. However, when I click the Plus button in the Accounts tab of Preferences, it automatically defaults to POP. How do I make it IMAP?

  • Create image on mouse click

    Hello, I'm trying to create an applet that will have a dot (any color) appear when the mouse is clicked. Most places have examples of buttons, but I am having a tough time figuring this one out. Thanks, -Rain

  • I get an error everytime I try to install the iOS 5.0.1 update

    I have been trying to install this update for months now and have been getting the same error. It doesn't give me any specific details in regards to the error, it just states that there is an error installing it. Has anyone else been having this prob