How to disable the "GETTING PLAYLIST" dialog box that appears in Radio

In itunes radio playlists, I click on a station and a message appears in a box, centered on the monitor screen that says "getting playlist" along with a blue striped status bar. I wonder if I can get rid of this annoying thing.! Because I know it is getting the playlist; I just clicked on a station. Why do I need to have this box sit on top and in the middle of my other applications?
Is there some genius out there who knows an answer?!

I don't think there's anyway to disable it, I just minimise iTunes or click on another application's logo while it loads. I agree with you as to it being annoying, but I don't think there's anyway to disable it. In my opinion it should just do it in the background without the dialog box...!

Similar Messages

  • How to disabled the input parameter dialog box in crystal reports 9

    Post Author: Murtaza
    CA Forum: General
    Hi friends,I have got stuck with a weird problem.  In my
    crystal report, I have set up some input parameters.  I am setting
    values for these parameters somewhere inside code.  But I don't
    want to show the default input parameter dialog box. Under any case,
    user should not see the ugly parameter dialog box that crystal
    presents.   Please suggest me how I can achieve
    this.  I cannot do this through code, because our environment does
    not allow that.  I have to do this in crystal reports viewer and
    by setting some property of the crystal report object. But everything
    must be done on UI, not through code. So, the solution should not be the following. 
    // step before step 1
    // **** the line needs to refer to the report and be set before setting
    ReportSource in the viewer to myReport
    myReport.EnableParameterPrompting = False
    Any help would be greatly appreciated.  Murtaza

    Post Author: sleahcim
    CA Forum: General
    Hi Murtaza,
    Unfortunately, I am not aware of any method to suppress the prompt for the input parameters, but still use them.  It is truly a design-related issue for the report.  The reason that the prompt appears is because the parameter it is prompting for is used in the report; in particular either the Group or Record Selection, or referenced in another formula.
    The only way I can think of to not show the prompt, is to not use the parameter in the report.  You did mention that you are setting the value of the parameter inside of the report -- are you doing this through using a formula?  Perhaps you can just remove the parameter and only use the formula that you are setting the default values with.
    -Michael

  • I have a 3GS. The iPod on the phone has made duplicates of some songs. I've tried using the "get info" dialog box to set all the information the same but the dups are still there. Even after erasing all music with iTunes they are still there.

    I have a 3GS. The iPod on the phone has made duplicates of some songs. I’ve tried using the “get info” dialog box to set all the information the same but the dups are still there. Even after erasing all music with iTunes, iTunes is empty but they are still on the phone.

    Some Users have reported that a Restore as New  has Resolved Issues after the Upgrade...
    Backup and Set Up as New Device
    http://support.apple.com/kb/HT4137

  • How can I get rid of the drop down suggestion box that appears as soon as I type the first letter in the address box?  Runnung 7.1.2

    How can I get rid of the drop down suggestion box that appears as soon as I type the first letter in the address box?  Runnung 7.1.2

    Writelady,
    I do not know of any such option. I don't think that it is even possible at this time, however it doesn't mean that maybe sometime in the future Apple or someone else will make a way to do such as your request.
    I do however think that you should let Apple know your opinion if you have not done such yet. You can give them product feedback at the following link. https://www.apple.com/feedback/safari.html
    I hope that this helps,
    -Weston

  • How to access the Document Options dialog box to select display properties?

    How to access the Document Options dialog box to select display properties (e.g. smartcut ) for a selected document to
    be viewed in the Workspace.
    regards

    Preferences --> General --> Reset all warnings.
    Mylenium

  • How to count the number of text boxes that are data entered

    How to count the number of text boxes that are data entered in visual basic form.

    Here is an Iterator that expands on my previous response:
    ''' <summary>
    ''' Iterator for form controls
    ''' </summary>
    ''' <param name="onlyControlsOfType">specify type if a certain type of controls needed</param>
    ''' <param name="onlyTopLevel">if true don't search containers within the form</param>
    ''' <returns></returns>
    ''' <remarks></remarks>
    Private Iterator Function AllControls(Optional onlyControlsOfType As Type = Nothing, _
    Optional onlyTopLevel As Boolean = False) As IEnumerable(Of Control)
    Dim ctrl As Control = Me.GetNextControl(Me, True)
    Do Until ctrl Is Nothing
    If onlyControlsOfType Is Nothing OrElse ctrl.GetType = onlyControlsOfType Then
    If TypeOf ctrl.Parent Is Form OrElse Not onlyTopLevel Then
    Yield ctrl
    End If
    End If
    ctrl = Me.GetNextControl(ctrl, True)
    Loop
    End Function
    Some sample uses:
    For Each
    For Each c As Control In AllControls()
    Debug.WriteLine(c.Name)
    Next
    List of all controls, including controls in containers i.e. Groupbox
    Dim l As List(Of Control) = AllControls().ToList
    List of all Textbox controls, including Textboxes in containers i.e. Groupbox
    l = AllControls(GetType(TextBox)).ToList
    List of all Textbox controls, don't include Textboxes in containers i.e. Groupbox
    l = AllControls(GetType(TextBox), True).ToList
    'Those who use Application.DoEvents() have no idea what it does and those who know what it does never use it.'  JohnWein
    Multics
    My Serial Port Answer

  • HT201628 I can't get the new version of iTunes to download, I keep getting a dialog box that "Apple Mobile Device" failed to start and asks me to verify that I have sufficient priveleges. How do I fix this?

    I tried to install the new version of iTunes days ago. It seems like it's going to install and then it comes up with a dialog box that says "Apple Mobile Device" failed to start and to verify I have sufficient priveleges. I don't know what I need to do to get it to install.

    It seems like it's going to install and then it comes up with a dialog box that says "Apple Mobile Device" failed to start and to verify I have sufficient priveleges.
    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • How to avoid the Commit/Rollback dialog box

    I've a JClient app with two frames wich relate to the same appllication module with the same connection (I need it because I want a single commit).
    I start the first frame,then I click a button to start the second frame, I insert data in the second one and I see the commit/rollback buttons in both navebars enabled.
    When I close the secod frame, without committing (because I want to commit at the end of the whole process) I receive the Commit/Rollback dialog box.
    How can I solve that problem ?
    TIA
    Tullio

    Remove or conditionalize the code in generated Form/Frame.java class that binds a WindowListener to the Frame like:
        addWindowListener(new WindowAdapter()
            public void windowClosing(WindowEvent e)
              _popupTransactionDialog();
              JUApplication juApp = panelBinding.getApplication();
              if (juApp != null)
                juApp.release();
              System.exit(0);
      }You may either conditionlize the above windowClosing method or the code in generated method
    private void _popupTransactionDialog()

  • How can I get past dialog box that wants my country/region?  Premiere Elements 13 will not open!!!

    Cannot get past the country/region dialog box because the list will not allow me to select the United States as the place where I live.  The list is too long and no way to get to the bottom to select the United States!!!  I can't get into Premiere Element 13.

    TNDOGGER888
    Thank you for the reply.
    Let us start with
    1. Is the computer operating system Windows 7, 8, or 8.1 64 bit? If it is and you are installing Premiere Elements 13, then the program files will go by default to Local Disk C/Program Files/Adobe/Adobe Premiere Elements 13 as the default location. If you have a computer that is using other than Windows 7, 8, or 8.1 64 bit, then it will not. Another question is, when your drives were set up, was the SSD drive designated the C drive?
    2. From what you wrote, I understood that you were using your installation files or installation disc to install the program, but were getting stopped very early in the installation process because you could not set the country/language. Typically that setting is done while you are starting the installation. One of the early dialog boxes that you get in that process is named Choose Setup Language (or something like that). That is where I believed you could not set the country/language. Is that the place to which you were referring or some place else?
    3. You do not need to uninstall Premiere Elements 10 to install and run Premiere Elements 13. Just use one program at a time.
    Typically 32 bit applications in a 64 bit computer operating system run in the 32 bit compatibility mode of the 64 bit system. And, these 32 bit applications program files will be in Program Files (x86) Folder. The 64 bit applications program files would be in Program Files. With regard to Premiere Elements 10, some of its files may be found in Program Files and Program Files (x86).
    But, the main focus now is getting Premiere Elements 13 installed to the default location on the Local Disk C/Program Files/Adobe/Adobe Premiere Elements 13 during the installation process after you designate the country/language and are given a country dependent NTSC or PAL system with which to work.
    From a quick look at 13 installation on Windows 7 64 bit, the first installation dialog that mentions language with country implications is
    This is for Premiere Elements 13 on Windows 7 or 8.1 64 bit. Since you say that the United States is further down the list in your case, I suspect this is not the place where you are having problems. Note the default location in this Options dialog. Did you leave that as is or change it to something else?
    Are you having these issues when you get to the Sign In dialog or some place else?
    Please consider and then let us decide what next.
    Many thanks for the follow up. Appreciated.
    ATR

  • Urgent!!how to open the file download dialog box????

    Hi all,
    i'm using the browse button for the user to select the file
    and a submit button, which when cliked should open the file
    download dialog box asking for open or save.
    i searched for so many forums and websites and didn't get the
    solution yet.
    i'm using jsp.
    anyone have the jsp code for the same????
    will b more helpful if u send it to me.
    thanx in advance.

    Hi
    Use the Filedialog class.
    Let your button call a method wich contains the following Java code:
    FileDialog filedialog =
    new FileDialog( Frame1.this, "Open a File", FileDialog.LOAD );
    //witch calls this constructor: public FileDialog(Frame parent, String title, int mode)
    //use Filedialog.SAVE to save a file.
    filedialog.show();
    String filename = filedialog.getFile();//to display the name of the file
    String directoryname = filedialog.getDirectory();// to display the directory name

  • When working in iPhoto I kept getting a dialog box that asked if I wanted to delete the photo.  I checked the little box that said do not show this again.  Well, I want to get this warning box back but I don't know where to find it.

    Hi I was organizing pictures in iphoto.  I am new at this.  I was deleting a bunch of duplicate pictures and I kept getting a 'warning box" that kept asking "are you sure you want to delete?"  I knew I wanted to delete all these pics so I checked the box that said "check box if you dont want to see this warning."  So checked the box.  Now I want to get that warning box back.  Any ideas?  I can't find anything on the internet or manuals.  thanks

    Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder.
    (On 10.7: Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library)
    (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
    What's the plist file?
    For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.

  • How to add a dropdown menu to the search box (the 'search this site' box that appears on all subsites)

    Hello there,
    I know that in the search center you can add search verticals. Then you can configure the search box so it has a drop down menu so you can specify the result source you want to search. 
    But my question is about the 'search this site' box which appears on all subsites, so not the one in the search center. Is it possible to add the same dropdown menu to this box as in the search center?
    Thanks in advance!

    Hi,
    According to your post, my understanding is that you wanted to add a dropdown menu to the search box.
    You need to look at the Search Settings page that is located under the Site Collection Administration of the Site Settings.
    Here are some similar blogs for your reference:
    SharePoint 2013 Search Settings and Search drop down menu
    Customizing Search Navigation on a SharePoint 2013 Publishing Site  
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • How to disable HP Universal Printing dialog box

    Hi, I am trying to install HP Universal Printing PCl 6 printers on a local machine using a batchfile from an application (C#) which automatically detects if a printer has been installed or not. The batchfile has the following entries:
    set IP=IP_%1
    pushd "%windir%\System32\Printing_Admin_Scripts\en-US\
    Cscript Prnport.vbs -a -r IP -h %1
    rundll32 printui.dll,PrintUIEntry /ia /m "HP Universal Printing PCl 6" /h "x64" /v "Type 3" /f %windir%\inf\ntprint.inf /u
    rundll32 printui.dll,PrintUIEntry /if /b %1 /f "%windir%\inf\ntprint.inf" /r IP /m "HP Universal Printing PCl 6"
    When I run my application, the printer is installed but when I try to print, sometimes I get the HP Universal Printing dialog asking me to select a printer. I can't even exit from this dialog. Other times when I dont get the printing dialog my print function fails with Invalid Handle exception.
    The next time I try to print with the printer installed, it prints documents successfully.
    How can I disable this print dialog using the batchfile above and why do I get the Invalid Handle expection on the first install and print??

    I don't think there's anyway to disable it, I just minimise iTunes or click on another application's logo while it loads. I agree with you as to it being annoying, but I don't think there's anyway to disable it. In my opinion it should just do it in the background without the dialog box...!

  • How to customize the Save as dialog Box for saving Web Query???

    Hello,
       we are usnging SAP NW Portal and BI 7.0 (SP14).
       We have published BI web queries in the Portal and it works just fine, now when the User select the Button "Save As" in the Context Menu of any web query, this will open a new Dialog Box name "Save As Dialog Box", so from this dialog box the user can select where to save the query, he/she have 3 options* to save qureies: My Favorites, Bex Portfolio and MyPortfolio, this also works fine.
      My Quetsion is: How can i customize the View of this "Save As" dialog box, so at the end the User can only select 2 Options:  My Favorites + MyPortfolio. So how to hide the Tab:  Bex Portfolio in the Dialog Box.
    Points for any good answer.
    Many Thanks and Regards,
    Nazih
    Edited by: Nazih Kayyali on Feb 3, 2009 4:04 AM

    In what you have posted, there is no reason it shouldn't work the same way in Acrobat 9. I would recommend that you submit your complete application to developer support.

  • How I change the save image dialog box view from oldest to newest first as the default?

    My save image dialog box has the oldest file in the folder in the upper left position (using list). I want to change it to the newest file shown first. It used to be that way, but now it showing oldest first. I haven't found any guidance on defaults for this box. Thanks.

    Leave it to Apple.  When I first got the phone, that's the way they were configured.  Now that they've flipped around, there's now way to change it!

Maybe you are looking for