How to disable the ipod even if connected to itunes

how to disable the ipod even if connected itunes and not responded

If you mean your iPod is disabled, try restoring in Recovery Mode to remedy it: http://support.apple.com/kb/HT1808

Similar Messages

  • When i plug in my ipod to my PC it makes a sound like it doesnt accept it. on the ipod, it says connect to itunes because it was disabled many times. why wont it connect?P.S I know nothing about this kind of stuff

    when i plug in my ipod to my PC it makes a sound like it doesnt accept it. on the ipod, it says connect to itunes because it was disabled many times. why wont it connect?P.S I know nothing about this kind of stuff

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • HT1212 I dissabled my ipod touch 4th generation. It says connect to itunes, and i did what it say to do but the "connect to itunes" screen never shows up...it just goes back to the "ipod is dissabled connect to itunes screen. What do i do?????

    I dissabled my ipod touch 4th generation. It says connect to itunes, and i did what it say to do but the "connect to itunes" screen never shows up...it just goes back to the "ipod is dissabled connect to itunes screen. What do i do?????

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • HT1212 how to disable the ipod nad restore the passcode which i have forgotten

    i want to know how to disable my ipod and restore the passcode which i have forgotten

    Forgotten Screen-Lock Passcode
    Connect the iOS device to your computer and try to make a backup
    iOS: How to back up
    Then restore via iTunes. The iOS device will be erased. Place the iOS device in Recovery Mode if necessary to allow the restore.
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store    

  • HT1320 how to reset an ipod that reads connect to Itunes

    How do I reset a Ipod touch that the screen has a connect to Itunes message

    You need to connect the device to your iTunes and you should be promped to restore it from there.  If iTunes doesn't see your iPod Touch when you plug it into one of the USB ports, try manually placing the iPod into recovery mode first using the instructions in this Apple support document.
    iOS: Unable to update or restore
    B-rock

  • How to disable a ipodtouch that says connect to itunes and the screen won't slide to let you type in the password?

    How can I disable my Ipod Touch that says connect to itunes and it won't let you slide to type in the password?

    Connect the device to your iTunes library in recovery mode using the instructions in this Apple support document and restore the iPod.
    iOS: Unable to update or restore
    B-rock

  • My ipod has stopped responding there is nothing on the screen just light is glowing and the screen is black and none of the buttons are responding and even the ipod is not connecting to itunes?what to do help.....

    i cant restore and the buttons are not responding?

    - Try a reset Nothing is lost.
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Then connect to your computer and see if yo can restore the iPod.
    - Next, place the iPod in recovery mode and then try to restore. for recovery mode se:
    iPhone and iPod touch: Unable to update or restore
    - If screen is still on, let the battery fully drain. After charging for an hour try the above again. If the screen is still on then it is time for an appointment at the Genius Bar of an Apple store since you likely have a hardware problem.

  • I have an ipod touch 4th gen its currently updated on sowftware 6.1.6 but shows its connected to the laptop but only says apple iod not the name of the ipod it wont connect to itunes on the laptop.HELP!!!

    I have ran itunes diagnostic tests SEVERAL times and says no ipod,iphone,or ipad found.is it my cord?(because this cord im using still charges the ipod)Or is it the ipod charger port? or my usb ports on the laptop (cause ive tried every usb port,same results).please help!!

    Hello, Fuentes94. 
    Thank you for visiting Apple Support Communities.
    If your device in not recognized in iTunes, I would try the steps in the article below.  Start with the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Jason H.

  • How to disable an ipod touch that won't connect to itunes or the computer

    I recently got an ipod touch that was reset before being given to me. It wouldn't connect to iTunes or the computer but would still charge in the USB port. I updated iTunes and tried doing a soft reset holding down home and sleep. Then I realized on the screen that says "connect to iTunes", on the top right it would say "iPod" and in the middle it would show a little lock symbol. I was told this ment it was disabled and that's why it wouldn't work. But how would I restore it or reset it if I cannot get passed the connect to itunes screen and it wont connect to the computer. PLEASE HELP

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen        
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • I have an 8g Ipod Touch and I accidentally recorded some video on it.  Now I don't know how to delete it.  When I connect to Itunes, there is no 'Video' Folder, so I can't even see/find the videos to delete them!

    I have an 8g Ipod Touch and I accidentally recorded some video on it.  Now I don't know how to delete it.  When I connect to Itunes, there is no 'Video' Folder, so I can't even see/find the videos to delete them!  I am not very experienced with Itunes, please help me.

    On the iPod go to the Photo app and then to the Camera Roll. Tap on the the video yu want to delete and then tap on the trash can icon in the lower right.

  • How do I reset my Ipod if the passcode that was put on it was entered wrong too many times and it disables the ipod?

    My son put a passcode on his IPOD TOUCH and couldnt remember it and entered it too many times. Now it has disabled the Ipod and says please connect to ITunes and ITunes will not connect to it because it has been disabled, I have already spoke to an Apple representative and did exactly what they told me to do to help reset the Ipod but that didnt work. So I am trying to figure out how we can get back into his IPod even if we have to factory reset it because nothing is working, not their instructions or the internet instructions for reseting it.

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device
    1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. iOS- Understanding passcodes
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. How to Recover Forgotten iPhone Restrictions Passcode | The iPhone and iPad
    6. Restoring iPod touch after forgotten passcode
    7. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    Restrictions Passcode Help
    1. How to Recover Forgotten iPhone, iPad Restrictions Passcode

  • My ipods disabled and it needs to connect to itunes. During the restore a window pops up and says i need to type the password into my ipod but i can't. what do i do?

    My ipods disabled and it needs to connect to itunes. During the restore a window pops up and says i need to type the password into my ipod but i can't. what do i do?

    Then try DFU mode and then restore.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • Im having problems with my iPod Touch 2nd gen. It's disabled and tells me to connect to iTunes. But when I do that, iTunes wont detect the iPod.I have put the iPod in USB- mode, and by that I mean I have tried connecting with holding the home button Help?

    It's disabled and tells me to connect to iTunes. But when I do that, iTunes wont detect the iPod.I have put the iPod in USB- mode, and by that I mean I have tried connecting with holding the home button when connecting the USB. Help?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • My ipod says it is disabled and tells me to connect to itunes but nothing happens how do I fix it, My ipod says it is disabled and tells me to connect to itunes but nothing happens how do I fix it

    My ipod says it is disabled and tells me to connect to itunes but nothing is happening how do I fix it

    Place the iPod in Recovery Mode and restore via iTunes.
    iOS: Wrong passcode results in red disabled screen
    If not successful, try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • How to sync the ipod touch in a foriegn computer if the ipod is disabled ?

    how to sync the ipod touch in a foriegn computer if the ipod is disabled ?

    Same basic way as if you connect it to your syncing computer.  However, you ned to restore to factory defaults/new iPod since there is not backup on the foreign computer.
    In both cases you have to place the iPod in recovery mode to bypass (an erase) the iPod.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

Maybe you are looking for

  • How can I name files separate from the page titles on the menu options?

    Ok, this is so much of a pain. I use a unix based web-server so the content is very case sensitive, and having spaces in the file names is just unmanageable. So.. how can I have pretty menu titles but have real world filenames? Presently I have to ge

  • Mail won't launch. Frozen ?

    Just upgraded to Leopard. Yes, very late adopter. Now Mail is frozen. I launch, there is no Mail Viewer and I need to force Quit. I don't think but I'm not sure if Mail modified/updated all the email for Mail v. 3. There was a dialog on first launch

  • Oracle 8i and DB2 Connectivity

    Hi, I dont know whether this is right forum to post this query. I want to connect to DB2 from Oracle 8i. I have read some documentation about Oracle gateways but it is not clear of how exactly we can connect to DB2. If any one has done this before pl

  • CS4 Install errors in Windows 7 - 'ColorProfilesRollback' issue

    I have tried to install CS$ Design Premium about 8 times!  Keep getting, "error as UninstallColorProfilesRollback and referred me to kb403891".   I have tried Solution 4 times.  Does not help.  Finally clicked, "continue" installation, and it appears

  • CMD=SAVE_VIEW in WAD

    Hi Can anyone give me the syntax for using the command in WAD template? I can't seem to make it work. Thanks Shlomi