How to disable the run-time popup menu in the sequence display on TestStand Operator Interface, that allow the use to skip the test?

Hello,
Regarding the skip/force pass/force fail options, when I set the ControlExecFlow to True in Teststand 3.1 and 3.5, in the Sequence Editor the menu options for skip/force pass/force fail are not active for Technician but, when I launch the Operator Interface logged with Technician the options are active. The problem is that if the technician sets one step to one of these options, and change the user to Operator, the test step remains skip/force pass.
Is there any possibility without modifying the Operator Interface (at programming level), to reload default values of the steps when changing the user to Operator?
Thank you,
Best regards,
paio

Similar Messages

How can I view TestStands Operator Interface front panel, from a VI, while a test is taking place.

I need to view the sequences and steps that are displayed during a test session while running TestStand. Except I would like to view this in a LabVIEW front panel

JD,
I'm not sure if you're asking to be able to view the actual code module's front panel (ie. VI front panel) while it's executing, or if you just want to see the steps and overall sequence in a VI front panel. If the latter is true then you can use the simple LabVIEW operator interface that ships with TestStand, as Dennis mentioned in his answer. This would indeed be a great place to start if you want to add any further functionality to the operator interface. If the former is true and you want to see the actual VI front panels of the steps as they execute, you can check that box "Show VI Front Panel" from the "Specify Module" window in TestStand.

HT1430 How do I turn off the data when I am not in a WiFi location? I noticed that I am using data when the phone is "on" and I am not in a WiFi situation, but not on the internet. So, how do I turn off the data?

How can I turn off the LTE data when I am someplace where there is not WiFi and I do not want my LTE running up a bill? I have tracked my usage and realize that the LTE is being used even when I am not using it, just because the phone is turned on.

Merely being on should not use any data. You must have something running - something using push notifications, or push email, prhaps?
So, you can either track down what is using the data and change it, or you could go in and disaple cellular data in your settings.
One other thing to check is
Settings -> General -> About -> Diagnostic and Usage data -> set it to "Don't Send"
Settings -> Restrictions -> Location Services -> System Services -> turn all these "OFF" (this will not affect how you use your phone at all, but will stop any outgoing location information being sent periodically back to Apple).

HT4437 I just bought an Apple TV. I fail to establish a connection between Apple TV and my Mac Book Pro. The first time I tried Mac Book had Leopard as an operating system. I could at least see the Apple TV Screen. I updated my OS to Lion but now no coo

I have problems pairing my Apple TV with my Mac and Iphone 4s. There was some connection between MAC and the App.TV when my operating system was LEOPARD. I now have OS Lion and there is no connection. I also could not find the AirPlay icon on the my Iphone. What do I do? Any recommendations?

Hi shldr2thewheel,
it has been a while since we have last spoke, I would like to let you know, I am still working on getting used to the switch from windows to a Mac/Apple system. I do have a new question for you, I did purchase In Design CS5.5 through journeyed.com through Cuyahoga Community College of which I attend as a student, is there a way to purchase an online book through iTunes to learn that as well? Also, you know me, the struggling student, I would also, when and if the book can be purchased through the iTunes, would need to know if you do know of a much easier book for struggling students like myself and at a reasonable price as well for the In Design CS5.5 program. Our campus bookstore had closed early, and, so did the colleges library and our local library here where I do live, so, I cannot go to either place to purchase a book or to take out a book, plus cash funds are low at this moment as well but, I do have money left on the iTunes account to use, if it can be used. So, can it be used, the iTunes money, towards finding a low priced online book? I am in great need of assistance as I have a project due for my one course for this Tuesday, September 4, 2012.
Sincerely in need of help once again,
Kim

How to specify a different directory for the Run-Time Engine?

With LV 7.1 it's become even more difficult to create installation sets in third-party tools without having to include the full run-time engine separately.
If you use any of the advanced analysis VIs you have to install the run-time engine (no use in including files in the same directory as the built application) and if you do and you use the old serial VIs you get a problem because the application will load the run-time from the main run-time installation and then look for serpdrv in that directory, not in the application folder...
So - being forced to use the installer builder in the application builder and include the run-time engine in the installation kit I wonder whether it is possible to specify where the run-time should be installed?
By default it will go in a directory called National Instruments in the program files folder, however that is not ideal due to the fact that the users have no relation to the fact that our application needs something from NI...and may end up deleting the directory ("National Instruments? - what do I need that for...let me delete it...). We would like to be able to specify that the run-time is installed silently in a directory named with our company name instead.
MTO

When you create the stand alone, in options you can actually set the temp directory and default directory. You can change it there OR in goto options and check for libraries/directories. You can change it there too.
Kudos always welcome for helpful posts

Will hardware drivers work with the run-time engine or only a full version of Labview?

Hello.
I'm trying to get a quatech I/O card to work. The instructions with the drivers we were given state "you must have labview installed before installing these drivers".
A program I wrote on my machine works fine with those drivers and does toggle outputs on the card, but when I build it into an executable on our test unit (doesn't have a full version of Labview, just the Run-Time engine) the card doesn't work.
We installed the run-time engine on the unit, then the drivers.
I guess my question is: Do most drivers work with both the full version of Labview and the run-time engine? Or do I need to somehow 'convert' these drivers to work with the run-time engine?
Th
anks for your help!
Dave Neumann
[email protected]

Dave:
I can't determine which dll is required but if there are more than one that
shipped with the quatech I/O card try to placing one dll at a time in the
same directory as the exe so that you can determine which one is the
required one. If that doesn't do it then it may need more than jsut one of
the dlls so placing all that came with the quatech I/O card s/w driver
package in the same directory as the exe should do the trick.
Best of luck.
-Tom
"Neumannium" wrote in message
news:[email protected]..
> Tom,
>
> Thanks for your reply. One of the problems I'm having is figuring out
> which .dll I would need to include (I'm not a software guy).
>
> Would the .dll your speaking of be different th
an the one which is
> installed with the drivers? I'm looking at a .dll that is installed
> when you install the labview drivers for this card, but the run-time
> engine still doesn't want to get the card to work. (The file installed
> when I install the drivers is called 'daqlv32.dll' and I don't know
> how to find any other .dll's I might need)
>
> Actually, it appears the card 'is' being seen by the run-time engine,
> but I'm getting impulses rather than distinct changes of state.
>
> Anyway, thanks for the help.
>
> Dave Neumann
> [email protected]

Business Rule err The following value is not valid for the run time prompt.

Hyperion Planning v 9.3.3
I have created a new BR with 2 local variables (created at the time of the BR), Variables are set as run time prompts. They are created as "Member" (not Members). The BR basically does a calc dim on dense and Agg on Sparce other than the prompt on Entity and Version dimensions. The entity variable has a limit on level 0 of the dimension. The Version variable limits to the input (Submit and Sandboxes)
The BR is associated in Planning with an input web form. Entity and Version are in the page. Is set to Run on Save and Use members on form.
If the run time prompts Hide boxes are checked, an empty Prompt pops up with only a Submit button. Click the button and an error comes up: "The following value is not valid for the run time prompt it was entered for:. But it does not indicate what member - just ends in the :.
The BR will run sucessfully only if the Run-time prompt is not hidden - "Hide" in the BR is unchecked. So the syntax and logic of the BR is correct and security should not be an issue.
The client wants no prompt. In production we have similar situations in which the BR works with the Web Forms without a prompt.
What am I doing wrong - I have tried restarting the Planning service and the EAS service.

My preferred method of doing this is:
1. In business rule, do not hide the run-time prompts. This makes it easy to validate the business rule as you are building it. I only use Global Variables.
2. On the form, have business rule set to run on save, use members on data form and hide prompt.
Check that in the business rule, for the variables (Run-Time prompts), that they are all in use. If not, delete them from the business rule. Are all your variables global? Are some local and some global? This could be the issue.
Deanna

Changing the run-time menu programatically

Hi All
I am developing an application which will be a bilingual. when i click french button on GUI, all display messages changes to french. When i click on English, all captions and messages come in Engilsh. I am using property node to change the captions of controls and graphs for different languages. and using a global variable to pass the language information between different windows(Sub VIs). Now the problem is, i have to change the Run-Time Menu also. Not getting how to do this. Can anyone help me about this. Is it possible to make this?
Thanks
Anil

Hi Anil,
It looks like you are on the right track by using Property Nodes. You can use the string input of the property node to select the appropriate message to display (language), along with a Boolean selector (ie: TRUE = English, FALSE = French (or vice-versa) ).
You could also use a Property Node for the language selection.
JLV

How to call "Edit VISA resource" window from run-time shortcut menu

Hope somebody is able to help me
When editing my application I have "Edit VISA resource" menu item.
You can see it on the first picture
But when I turm on run-time shortcut menu and run the application I\d like to get same menu item directing me to VISA resource settings window.
Is it possible or not?
How can I call different MAX components programmatically? I can invoke MAX with ActiveX, but I can not find how can I invoke exactly "Edit VISA resource" window...
Thanks to anybody for any help!
Attachments:
edit visa resource.png ‏63 KB
no edit visa resource.png ‏60 KB

comper wrote:
Hope somebody is able to help me
When editing my application I have "Edit VISA resource" menu item.
You can see it on the first picture
But when I turm on run-time shortcut menu and run the application I\d like to get same menu item directing me to VISA resource settings window.
Is it possible or not?
How can I call different MAX components programmatically? I can invoke MAX with ActiveX, but I can not find how can I invoke exactly "Edit VISA resource" window...
Thanks to anybody for any help!
Not sure it is a good idea to be editing VISA resources while the VI is running. I'm not even sure it's "legal" which might explain why it isn't there. If all you want to to is be able to change which equipment to talk to, maybe it's best to just to have a VISA resource control and have the user select from there, or maybe a ring control with pre-defined VISA resources.
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

How to know the timings of the run time of thr report

Hi,
Can you please tell me how to know the run time of the query , i mean how much time it took for the query to dispaly the results .
Also we have these queries in the workbook. How to refresh the work book . is it enough if i refresh the query.
Thanks
Sruthi

Hi
How can we check in RSRT tcode?
And how can we do i RSRTRACE?
Can I know the procedure.

In LV6.1, can I get the run-time menu refnum of a VI from the VI Path?

Actually, for any version of LabVIEW, can I get the run-time menu refnum from the VI Path (or the VI reference)?
Thanks!
Enrique
www.vartortech.com

I just thought of a workaround...you could have a Menu Bar Ref indicator on your main VI front panel. When your VI runs, you could have the Current VI's Menubar function wire the refnum into that indicator. Then, in your subVI that has the VI reference, you could use VI Server to read the value of that indicator, then cast the value into a refnum wire, then you'd have access to the menubar reference in the subVI without having to pass it in to a subVI terminal. Would that work?
Oh, another simpler idea would be to simply wire the Menubar reference into a global, and read that global in the subVI.
-D
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

[Urgent!!]How to control the running time??

Hi,
I'm an undergraduate researcher in the University of Michigan. I used NI labVIEW FPGA on my current project and now i meet a problem.
I have a labview code that has runs with 3 subroutines. they execute one after another for a given time period for each iteration of the entire code. that is i built them in a flat sequence structure inside a large while loop and each of the subroutine is a while loop with several subvi's in it. not that complicated but i have to specify how long each subroutine runs. now i have a problem to set that execution time. i don't know exactly what kind of timing function i shall use. i tried the "Elapsed time" function but that only works for the first iteration. from the second iteration on each subroutine only runs for once, instead of continuing to run until the given time elapsed. so i don't know how to correctly control the running time. It's reallly urgent, so could you please give me some suggestions about it? Thanks a million!!
Xiaofei

Thank you for your suggestion!
sorry but that this method won't help because my code is sort of difficult to put into a for loop .
the logic is like this: first the output is set to 0 for a user-defined amount of time (means no excitation). secondly it gets excitation and gets output but no data saving is allowed for a user-defined amount of time. at the same time, one paramater is automatically changed. (the reason for not saving data is that there is a transient response when the parameter changes). thirdly, data saving begins with the same
parameters as before, also for a user-defined amount of time. and then after these three steps one iteration is done. for iterations there is a different parameter, the user defines the range of the parameter and the number of different values in between and the code will do the increment at equal intervals automatically. my problem now is that i don't know how to correctly control the time. i have tried various ways but no one works.
the second problem is that i don't know how to let it run and not saving data and then saving data without changing everything else. what i have now is to call the same VI twice, once for only running and no data saving and the other for saving data. but then the problem is that in between these two routines, the output suddenly becomes zero and gets excited again after i call it. My professor said that i cannot let the output become zero, otherwise there is no meaning in waiting for the excitation to become stablee. but then i don't know how to call a VI only once and let it do the saving for only the latter part of the running time. i have been working on this thing for two weeks now and still have no idea....Sorry the problem is long and tedious, but if anyone have any idea about it, please let me know, i will be most grateful. Thanks a million!!!

How can I test the running time of a method?

c.What is the running time of your method smallest, as a function of n, the number of elements in the list? Use big-Oh notation.
I quoated from a java problem..
Anyone can tell me how I can test the running time? Thanks ! :D

it depends on what is in the method. For example a for loop executed n times would have a O(n). A double for loop (each loopp run n times) will have O(n^2). Do this: determine how many times each loop in the method is run. This is the first term in your runtime equation. Do this for all other loops in the method and add them all together. Most other statements that are not iterative should have a constant runtime so O(1). For conditional statements, the runtime depends on the most time consuming portion of the statement. Once all these are added together, take the O(equation) which should just leave the biggest term. i.e. O(5n^2+3n+8) = O(n^2). Hope this helps.
note: this does not apply to recursive methods

Help me, I am using flash pro cc and air 4.0,i have one problem when publishing apk through air publish settings,choosing the run time option from third party is disabled.can any one help me bcoz i have to publish without air runtime.......

Help me, I am using flash pro cc and air 4.0,i have one problem when publishing apk through air publish settings,choosing the run time option from third party is disabled.
can any one help me bcoz i have to publish without air runtime.......

Hi,
This option is available when your publish target is set to AIR 3.6.
You can download the desired AIR SDK version from Archived Adobe AIR SDK versions
Thanks!
Mohan

How to shorten the running time of NXT brick (TETRIX & MATRIX toolkit)

Hi
How to shorten the running time of NXT brick ?
(TETRIX & MATRIX toolkit running time)
Software is LabVIEW 2012 for LEGO MINDSTORMS
Thanks.
Solved!
Go to Solution.
Attachments:
TETRIX_Toolkit_running_time.vi ‏20 KB
MATRIX_Toolkit_running_time.vi ‏13 KB

Hi 40123157,
You are using the module in an appropriate way, and there is no easy way to improve the loop iteration time beyond what you have done. Here are my suggestions:
1) i2c commands do take a long time. In your application, it may speed up if you only execute Move Motors only when the motor speed has changed.
2) For this particular example, you are not using the output of Motor Status. If this VI doesn't need to execute it may be removed.
3) If you must speed up execution beyond this, as an advanced user of LabVIEW, you can create a copy of the Move Motors VI and modify it as you choose. All you have to do for the 'DC Motors' input is use cluster to array on the cluster, as shown below. I think you can speed it up by executing all setup before the loop (set connection type and setup sensor), and removing calculate power value if you're only sending values between -100 and 100.
4) Drawing to the screen may be slowing you down here.

How to disable the run-time popup menu in the sequence display on TestStand Operator Interface, that allow the use to skip the test?

Similar Messages

Maybe you are looking for