How to disable the Super User menu - (Right click windows icon menu) - Server 2012 R2 - RDS

Greetings all,
Can anyone please advise how to remove the Administrator / Super User menu that appears when you right click the Windows Icon (old start button) in Server 2012 R2 - for RDS users. I have searched and been able to disable access to each of these menu items (Control
Panel, Event Viewer, Run, etc). But I am searching for a way to completely remove the menu. This menu also appears when you use Win-X shortcut.
Hope someone can help.
Terry

Hi Terry,
You can try following points, might helpful in your case. Go to 
C:\Users\Default\AppData\Local\Microsoft\Windows 
there you will see file called WinX 
Right click this file and copy then go to
C:\Users\YOUR_USERNAME\AppData\Local\Microsoft\Windows 
then paste the file into the folder.
NOTE: replace YOUR_USERNAME with your actual username. 
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

  • How to disable the archive logs in SAP IDES(Windows) using SQL Server

    can any body tell us How to disable the archive logs in SAP IDES(Windows 2003) using SQL Server 2000.SP4.?

    Hi,
    Unfortunately, SQL Server does not have the option to turn off transaction logging. You can set the recovery mode to SIMPLE, instead of FULL. This will result in the transaction log being truncated on checkpoint.
    http://support.microsoft.com/kb/873235 - check this microsoft article
    This will help in reduction of the size of the transcation log.
    - Regards, Dibya

  • How to disable the checkout button in saved carts window in istore

    Hi all,
    There is a requirement to disable the check out button in the saved carts window in istore.
    When a user is saving a shopping cart in istore and revisiting back to the cart after some days. he should not be able to checkout but he has to click on update and go through the checkout.
    If i could disable the checkout button then i could make all the users to click on the update button to proceed to checkout
    Any ideas please............
    Regards,
    Prasad
    Message was edited by:
    Prasad rajan

    Cross posted: [http://www.coderanch.com/t/487888/Swing-AWT-SWT-JFace/java/disable-cancel-button-input-dialog]

  • How to disabled the activation of deployed Test VMs from templates with SCVMM 2012 R2

    Hello,
    I have created templates with key for deploying windows 8 VMs,But i wants do not activate these VMs as it is just a test VM.
    Is it possible through SCVMM to deploy VM with key without activation ?
    Thanks
    RICHA KM

    Thanks for the reply.
    My network architecture is exactly like the one described on your paper, with 2 differences:
    1. I only have one host in the Production group and one host in the Gateway group
    2. The first host has one physical NIC, the second host has 2 NICs, one internal and one with an Internet (routable) IP
    After applying the logical switches on the hosts, I lost Internet connectivity on the gateway host (I have no idea why there is no logical Gateway Switch !!!). VMM completed the jobs with no error.
    Any thoughts?

  • Disable set as background from right click in internet explorer 8,9,10,11 by GPO in Win Serv 2008 R2

    Hi.
    How to disable ''set as background'' from right click in internet explorer 8,9,10,11 by GPO in Win Serv 2008 R2.
    People in my domain can set their background by right click in the pics on their IE, I enabled by GPO a wallpaper by default in ''Administrative Templates > Desktop > Desktop > Desktop Wallpaper''  and I enable too the  ''Administrative Templates
    > Control Panel > Personalization > Prevent changing desktop background'' at login people have the corporative Desktop but they can change by IE. What can I do? thanks.
    <u5:p></u5:p>

    Hi,
    I test this issue, actually, in IE 11, the option "set as backgroud" is grayed out after I applied policy  Administrative Templates > Control Panel > Personalization > Prevent changing desktop background, but seems not suitable for
    other versions of IE.
    You can try other solutions listed in the similiar thread
    How to disable the "Set as Desktop background"?<o:p></o:p>
    http://social.technet.microsoft.com/Forums/en-US/889447df-8452-44b4-bcdf-bf217b75ce6f/how-to-disable-the-set-as-desktop-background?forum=windowssteadystate
    Regards<o:p></o:p>
    Yolanda
    TechNet Community Support

  • How to disable the context menu

    Hi folks,
    we have an application running in EP. We want to disable the context menu (right click hand). Any help is welcome.

    Hi!
    I have the same problem because we want to run WDA applications in th internet and there it is "not allowed" to "overwrite" the user's normal browser context menu.
    Additionally we are interested in how to disable the F1 and Ctrl.-F1 help features for the whole WDA application. We do not want to present technical details in the internet.
    Any help very welcome!!!!
    Regards,
    Volker

  • How to disable the run-time popup menu in the sequence display on TestStand Operator Interface, that allow the use to skip the test?

    How to disable the run-time popup menu in the sequence display on TestStand Operator Interface, that allow the use to skip the test?

    Hello,
                  Regarding the skip/force pass/force fail options, when I set the ControlExecFlow to True in Teststand 3.1 and 3.5, in the Sequence Editor the menu options for skip/force pass/force fail are not active for Technician but, when I launch the Operator Interface logged with Technician the options are active. The problem is that if the technician sets one step to one of these options, and change the user to Operator, the test step remains skip/force pass.
                  Is there any possibility without modifying the Operator Interface (at programming level), to reload default values of the steps when changing the user to Operator?
    Thank you,
    Best regards,
    paio

  • How to disable the previously entered user ID's that automatically appear. For example ; when logging into email , first letter of user ID promts the previously used email user IDs... Want to disable this feature---How can ot be done ?

    Question
    How to disable the previously entered user ID's that automatically appear. For example ; when logging into email , first letter of user ID prompts the previously used email user IDs... Want to disable this feature---How can it be done ?

    *Click the (empty) input field on the web page to open the drop down list
    *Highlight an entry in the drop down list
    *Press the Delete key (on Mac: Shift+Delete) to remove it.
    *http://kb.mozillazine.org/Deleting_autocomplete_entries
    * Tools > Options > Security: Passwords: "Saved Passwords" > "Show Passwords"
    * Tools > Options > Privacy > History: "Remember search and form history"
    * https://support.mozilla.com/kb/Remembering+passwords
    * https://support.mozilla.com/kb/Form+autocomplete

  • How to show the login user Id in the upper right corner of each page?

    Hi,
    I was wondering how to show the login user Id in the upper right corner of each page?
    thanks so much!
    cchu

    Cchu,
    The easy question first: applying a style to the welcome message. If you look at the page source, you'll see that #WELCOME_USER# is expanded to <div class="app-user">Welcome: DEMO</div> So to change the style of the message, you need to tweak the style of the app-user div in your CSS, or override it in a style block in your HTML header.
    Now, the tougher question: why the text is wrapping for you. And, really, without seeing your entire page, I can't give a full answer. But I'd suggest that what's most likely happening is that the table column you're putting it in is too narrow, so it's wrapping; try replacing the td tag with <td nowrap="nowrap"> This will force the column to be wide enough to display the full message, but might result in weird formatting elsewhere on the page (depending on what all is in your table).
    -David

  • Facing Strange Problem in DIR HOW TO DISABLE THE RIGHT CLICK MOUSE IN THE DIRECTOR? (through parent script/ movie?)

    Summary : HARD QUESTION : In the DIR file, the game runs well, right click = no effect. Coz I'm not making right click scripts. BUT in EXE file, right click = ERROR.
    Explanation :
    In the Adobe Director screen, this DIR file game is worked 100%.
    I tested right click EVERYWHERE... NOTHING HAPPENS.
    Because I don't make any programming with "on rightmouseup" or "on rightmousedown" command.
    THEN, I published it into EXE...
    I tested right click EVERYWHERE...I hoped the result will be the same as DIR tests....
    WHEN I RIGHT CLICK IN THE AREA THAT'S GIVEN ON EXITFRAME ME, IT SHOWS ERROR, CHANGING PICTURES.....
    this does not happened in the DIR file...
    I didn't make a runmode program or anything else.... This is awkward... mystery for me...
    WHY THERE'S A DIFFERENCE IN DIR and EXE... it should be exactly the same result.
    I have used Director for years.... This is really strange for me...
    >>>>>>>>HOW TO DISABLE THE RIGHT CLICK MOUSE IN THE DIRECTOR?
    THIS ONE is useless.... It doesn't prevent the rightmouse click,...
          on rightmouseup me
                 nothing
         end
          on rightmousedown me
                 nothing
         end

    Dear Adobe Forums friends
    I need your help and guide through this problem...
    In the game's dir file that is run on the DIRECTOR softwawre,
    the game runs perfectly, I can do LEFT CLICKS (coz I programmed the script)
    and when I do RIGHT CLICKS = there are no effect ( coz I don't do script for it)
    LATER THIS GAME TURNED INTO EXE.
    It supposed to run like the dir file as ABOVE. BUT STRANGELY, WHEN
    I DO RIGHT CLICKS, it turns Error and showing as the picture attachment.
    The right clicks that goes error are above the picture of numeric button only. (in DIR file
    this run normal). I looked into the script behind the numeric button picture, there are only "on exitframe me", there are no script I made inside the "on exitframe me" that is triggering RIGHT CLICKS.
    1. I wonder why there are differences in DIR and EXE effect
    2. Why right click? Left click effects are all normal.
    3. IS THERE ANY WAY TO DISABLE ALL RIGHT CLICKs since the beginning of EXE. So the game will be run normal. I don't need right clicks anyway, but whenever people do right click there will be ERROR.??
    4. Is there any way to STOP THE MESSSAGE BOX TO APPEAR IN FRONT OF THE GAME? (I hate the Dirrector Error Message Box), or auto press OK.
    NB: this game uses Buddy API Xtras, File IO Xtras.
    Thx
    David S

  • How to disable the validity of a particular Role for 100 users, in a single

    Hi
    How to disable the validity of a particular Role
    which is assigned to 100 users. (disabling the role of change the validity of the role )
    at present am doing manually, by entering into each user and changing the validity of the role
    Thanks.

    > How to disable the validity of a particular Role for 100 users, in a single ...
    ... shot?
    Assign a reference user to the 100+ users and create events in the factory calendar which assigns and removes the role from the reference user only.
    The downside is that it is not scalable for many of the same concepts at the same time, because a dialog user can at one logon time only have one reference user assigned to them.
    Cheers,
    Julius

  • UCM - WEBDAV - How to Disable the New Folder option in the action popup

    I am trying to implement WebDav functionality. I don't want the users to create folders in the folder mapped to a security group. As long as the user has privilege to contribute to the security group he/she can checkin documents but they should not be able to create folder under it. I did not find documentation as to how to disable the new folder option in the context action menu that pops up on mouse right click. Is there any way we can do that?
    Thanx.
    Edited by: user10991492 on Nov 1, 2010 11:24 AM

    This is the boilerplate text often used in connection to networks in general. It is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe:
    If you are opening files over a network or saving them to a network server, please cease and desist immediately in the event you are currently experiencing problems with one or more files.
    Working across a network in general is not supported by Adobe.
    See: 
    http://kb2.adobe.com/cps/406/kb406793.html
      Copy the CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
        Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work.  It should.
        Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
      If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.

  • How to disable the reminding dialog when close the webi report viewer

    Dear all
    How to disable the reminding dialog when close the webi report viewer
    Background
    When user close the webi report viewer in inforview by click the button in the right-top of the webi report viewer frame. It always prompt a dialog to remind user that the modification will be lost without saving.
    But customer need to disable this dialog, and can clost the report viewer directly.
    So is there any ways to modify this?
    I think it shoule modify some .js file under tomcat, but can not find the solution.
    Thanks a lot, any information woulde be appreciated.
    David Zhang

    I've had the same issue bugging me since installing Snow, er, lion, er, cat, er, cougar, er, Mountain Lion. Incredibly ANNOYING.
    It's stupid stuff like this and reverse scrolling that really turn long-timer users off. I'm personally glad Forstall got fired for blunders such as these.
    I'm serious peeved that turning off iCloud Documents & Data actually deletes documents and data locally. That's just incredibly stupid.
    MANY thanks mende1 for the answer on how to fix it.

  • How to disable the status icon in Skype 4 for Andr...

    Dear Skypers,
    How to disable the status icon in Skype 4 for Android phones?
    The guide on this following support page not working anymore: https://support.skype.com/en/faq/FA12359/how-do-i-enable-or-disable-the-status-icon-in-skype-4-for-a...
    Older version has the option to disable Skype Status and get rid of the Skype icon on Android status bar. But latest 4.4.0.31835 could not disable Skype Status in notifications settings. :/
    Device: Google Nexus 4
    Android: 4.3 JWR66Y
    Skype: 4.4.0.31835
    Please bring back the option to disable the Skype icon on Android status bar. This is the main reason I uninstall Skype. :/
    Kudos to the team, the apps is really smooth and fluid to use. Would be nice if you guys are following the Android Design Principles and using Google Cloud Messaging for push notification to improve User Experience and battery life.
    Kind regards,
    /chrone
    everytime i get ahead, i feel more dead.
    Solved!
    Go to Solution.
    Attachments:
    how to get rid of skype icon on android status bar.png ‏46 KB

    Long click on this notification a sub menu having field "App info" would appear goto App Info. You can goto there by "Manage Apps">"Skype" also. 
    Uncheck Option "Show Notifications" A dialog will open. Don't worry about notifications for now just click OK. Now the notification icon skype has also been removed. 
    Now simply check "Show notification again". After doing this you would get notifications but skype icon would not be shown in the status bar anymore.
    Issue: this is just a trick you need to repeat this every time sign out and sign in again. Mostly you don't do that so no need to worry.

  • How to disable the screen of copyright  at logon?

    Hi,
    How to disable the screen of copyright  at logon?
    "   SAP user name...............
         Last system logon...........
         Copyright(c) SAP AG 2002.
         All rights reserved.
          License expires on........... "
    Vitalii.

    HI,
    As I know this is not possible, due to license agreement between SAP and DB vendors.
    This popup should appear only frist logon and if you again logon with other language.
    You can disable it but NOT recomended do change coding
    screen 020 of SAPMSYST.
    Ask you developers to check that.
    Best regards,
    Peter Nechala

Maybe you are looking for