How to disable the "turn page" event triggered by the scroll/swipe function?

The problem is as follows.
The default behaviour of Acrobat Reader (both stand alone and browser plug-in) is to allow scrolling/swiping with the mouse wheel/trackpad. This is useful when the pdf's page length is greater than the screen's own length, because you can read the pdf with no need to distract your attention from the text to the scrollbar button. However, the same scroll/swipe function turns into a usability problem when the pdf is embedded in a html page and the pdf's page length is smaller than the browser's length. In this case, the scroll/swipe turns the page, distracting your attention from the text to the unintended behaviour of the browser. What happens is that you are so used to scrolling/swiping that you did it unintentionally in the pdf's caption area. You really did not want to turn pages in the pdf. Furthermore, if the pdf takes the whole html page, being a website, the scroll/swipe function flips the website pages in ways that neither the reader nor the writer had ever intended. Hence the question. How to disable, in this case, the "turn page" event triggered by the scroll/swipe function? A JavaScript should do, but the SDK documents did not help so far...
Message was edited by: 41457173
Message was edited by: 41457173

... or release a patch for the API,
... or suggest an alternative route to achieve the intended result.

Similar Messages

How to disable the trackpad button function?

My trackpad botton goes mad, it's seems like hold you mouse's left button and you can click the right button, just can't open the file, my usb mouse works great only in Snow Leopard, in Leopard I can use none of mouse or trackpad.
I think my trackpad button has broken, I want to disable this button, but I don't know how, can you give me some advise?
I'm using Snow leopard( 10.6.2 ) now, how to disable the trackpad button in SL?

I'm using Snow leopard( 10.6.2 ) now, how to disable the trackpad button in SL and keep my trackpad available, I prefer using touchpad, I think I can disable the button and still use touchpad?
I apologies for my poor english.

How to disable the "scroll lock" pointer?

I use 2-finger swipe to scroll on my trackpad.
I often get my pointer transformed into a scrolling pointer: it is gray circle about 1 cm in diameter, with a small white circle in the middle, 1 small arrow tip pointing down below the circle and 1 arrow tip pointing up above the circle.
This happens mostly when I touch the trackpad with 2 fingers, like when I am about to scroll with 2-finger gesture.
If I could post a png image I would but that is about as accurate as I could describe it.
When it appears, it locks the scrolling (with 1 finger swipe it keeps scrolling in the direction of the swipe).
This is very annoying because it interferes with the 2-finger scrolling.
Sometimes I get a "move" pointer (same as the one a above but arrow tips in all 4 directions).
Does anybody know what this "feature" is called and how to disable it?
Thanks

Hi,
The Scrollbar in the activeX browser is the property of the page being loaded and not the container.
If you have access to editing the HTML files that you are loading, add the following line in the html document:
If you don't have write access to the html files, then you can cover the scroll area of the activeX container with another activeX container. You can't use a decoration to cover it since the activeX container will remain on top.
I hope this helps.
Feroz

How to disable the v$session functionality ?

Hi All,
Whenever a client connects to oracle, a row is inserted into v$session object that contains specific information
of the client. How can I disable this feature ....
Thanks & Regards,
Kumar.

The best way to protect the content of this view from prying eyes is to implement a security scheme that gives select privilege only to users you choose. For a system that has been in service this is not such an easy thing to do.
If you want to provide a subset of the columns in another view, then you can create it as another name and grant select privilege on that to whoever has it already. Then you can revoke select privileges on the original view from those same grantees.
Look in v$fixed_view_definition for the full text of the view's definition. It's a simple matter of mapping the query's select list items to the view columns. Then you can rewrite the view to your liking.
Before you go and do this, you should make sure that you really want to hide the data. They are immensely valuable for diagnosing all sorts of problems.

How to Disable the Lead selection Action on aTable n How to Refreh a Page

HI....
1)How to Disable the Lead selection Action on aTable n How to Refreh a Page r web dynpro application.
In my case i have a table n user enters data on multiple rows in table , n i have some input fields outside of table for those Inputs fields am settiing the data at the screen initilization(in Init() moethod by hard code).the problem is whenever the is clicking in th 2nd row of a table the Lead Selection is triggerig and the data in the Input Fields outside the table is not displayinig.
So by removing the lead Selection Action of a table i thought i can reslove this,
2) How to refresha page(like we click F5 on key board),is it can be done thru code in web dynpro application
Regards
Rajesh

Hi,
You did not explained what is your functionality or coding in leadselection. Is that action on leadselection is necessary for you?.
1)If you just want to remove the action then go to table properties and remove the action for leadselection.
2)If you still want to continue with your leadselect action, then what you can do is.. write the code in leadselection action to again set the input fields which are out from table. That is what you did in your init method.
Page Refreshing
3) What do you mean by page refreshing? is that refreshing your table only or both the table and input fields.
What I understood is you are allowing the user to enter values in table and soon after pressing a button the values should be saved and the data in input fields shld be deleted. For this if you only invalidate the node then the user entered data will be lost.
So what you do is after getting the input data from the user add it to a ArrayList and then invalidate the node which clears the data in input field. Finally bind the Arraylist to your node. see the following code. This is a concept make changes according to your requirement
ArrayList list1=new ArrayList();
wdContext.nodeAbc().bind(list1);
IPrivateExcelviw.IAbcElement ele = wdContext.createAbcElement();
ele.setNo(wdContext.currentAbcElement().getNo());
ele.setName(wdContext.currentAbcElement().getName());
ele.setMarks(wdContext.currentAbcElement().getMarks());
list1.add(ele);
wdContext.nodeAbc().invalidate();
wdContext.nodeAbc().bind(list1);
Revert me if you have any doubts
Regards
Raghu
Edited by: Raghunandan Madarikuruva on Oct 16, 2008 8:07 AM

How to disable the mouseWheel event in Flex2?

How to disable the mouseWheel event? Basically I want my
flex2 app not to respond to any mouse wheel events. Thanks.

I downloaded one of the PDF form (IMM5490) from cic.gc.ca and saved it on my computer after filling it up. Later on the following message popped up when I tried to open the form again later to in order to make some changes.
"This document enabled extended features in Adobe Reader. The document has been changed since it was created and use of extended features is no longer available. Please contact the author for the original version of this document"
Your help in this regard will be greatly appreciated, since, I have already filled the form with a lot of information and I will not be able to edit the form with additional information unless I disable the extended features ( I guess).

Facing Strange Problem in DIR HOW TO DISABLE THE RIGHT CLICK MOUSE IN THE DIRECTOR? (through parent script/ movie?)

Summary : HARD QUESTION : In the DIR file, the game runs well, right click = no effect. Coz I'm not making right click scripts. BUT in EXE file, right click = ERROR.
Explanation :
In the Adobe Director screen, this DIR file game is worked 100%.
I tested right click EVERYWHERE... NOTHING HAPPENS.
Because I don't make any programming with "on rightmouseup" or "on rightmousedown" command.
THEN, I published it into EXE...
I tested right click EVERYWHERE...I hoped the result will be the same as DIR tests....
WHEN I RIGHT CLICK IN THE AREA THAT'S GIVEN ON EXITFRAME ME, IT SHOWS ERROR, CHANGING PICTURES.....
this does not happened in the DIR file...
I didn't make a runmode program or anything else.... This is awkward... mystery for me...
WHY THERE'S A DIFFERENCE IN DIR and EXE... it should be exactly the same result.
I have used Director for years.... This is really strange for me...
>>>>>>>>HOW TO DISABLE THE RIGHT CLICK MOUSE IN THE DIRECTOR?
THIS ONE is useless.... It doesn't prevent the rightmouse click,...
      on rightmouseup me
             nothing
     end
      on rightmousedown me
             nothing
     end

Dear Adobe Forums friends
I need your help and guide through this problem...
In the game's dir file that is run on the DIRECTOR softwawre,
the game runs perfectly, I can do LEFT CLICKS (coz I programmed the script)
and when I do RIGHT CLICKS = there are no effect ( coz I don't do script for it)
LATER THIS GAME TURNED INTO EXE.
It supposed to run like the dir file as ABOVE. BUT STRANGELY, WHEN
I DO RIGHT CLICKS, it turns Error and showing as the picture attachment.
The right clicks that goes error are above the picture of numeric button only. (in DIR file
this run normal). I looked into the script behind the numeric button picture, there are only "on exitframe me", there are no script I made inside the "on exitframe me" that is triggering RIGHT CLICKS.
1. I wonder why there are differences in DIR and EXE effect
2. Why right click? Left click effects are all normal.
3. IS THERE ANY WAY TO DISABLE ALL RIGHT CLICKs since the beginning of EXE. So the game will be run normal. I don't need right clicks anyway, but whenever people do right click there will be ERROR.??
4. Is there any way to STOP THE MESSSAGE BOX TO APPEAR IN FRONT OF THE GAME? (I hate the Dirrector Error Message Box), or auto press OK.
NB: this game uses Buddy API Xtras, File IO Xtras.
Thx
David S

How to disable the reminding dialog when close the webi report viewer

Dear all
How to disable the reminding dialog when close the webi report viewer
Background
When user close the webi report viewer in inforview by click the button in the right-top of the webi report viewer frame. It always prompt a dialog to remind user that the modification will be lost without saving.
But customer need to disable this dialog, and can clost the report viewer directly.
So is there any ways to modify this?
I think it shoule modify some .js file under tomcat, but can not find the solution.
Thanks a lot, any information woulde be appreciated.
David Zhang

I've had the same issue bugging me since installing Snow, er, lion, er, cat, er, cougar, er, Mountain Lion. Incredibly ANNOYING.
It's stupid stuff like this and reverse scrolling that really turn long-timer users off. I'm personally glad Forstall got fired for blunders such as these.
I'm serious peeved that turning off iCloud Documents & Data actually deletes documents and data locally. That's just incredibly stupid.
MANY thanks mende1 for the answer on how to fix it.

How to disable the previously entered user ID's that automatically appear. For example ; when logging into email , first letter of user ID promts the previously used email user IDs... Want to disable this feature---How can ot be done ?

Question
How to disable the previously entered user ID's that automatically appear. For example ; when logging into email , first letter of user ID prompts the previously used email user IDs... Want to disable this feature---How can it be done ?

*Click the (empty) input field on the web page to open the drop down list
*Highlight an entry in the drop down list
*Press the Delete key (on Mac: Shift+Delete) to remove it.
*http://kb.mozillazine.org/Deleting_autocomplete_entries
* Tools > Options > Security: Passwords: "Saved Passwords" > "Show Passwords"
* Tools > Options > Privacy > History: "Remember search and form history"
* https://support.mozilla.com/kb/Remembering+passwords
* https://support.mozilla.com/kb/Form+autocomplete

How to disable the selection of "Title and logo URL of a SharePoint 2013 site" from browser

how to disable the selection of "Title and logo URL of a SharePoint 2013 site" from browser or How can we able to set our custom default log to the sp2013 site using code.So that users are not allowed to change from browser again.
Thanks & Regards, Krishna

Hi Krishna,
For your issue, you need to deploy a farm solution using HideCustomAction to hide site settings link. For example to hide “Title, description, and logo” link you can use below code:
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<HideCustomAction
GroupId="Customization"
HideActionId = "ProjectSettings"
Location = "Microsoft.SharePoint.SiteSettings">
</HideCustomAction>
</Elements>
Reference:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/92f002b7-0e9c-424e-836a-de40c4e5d81f/hide-option-from-site-settings-page-in-sharepoint-2010?forum=sharepointdevelopmentprevious
http://blog.milanchauhan.com/2013/06/add-custom-section-in-site-settings.html
Best Regards,
Eric
Eric Tao
TechNet Community Support

How to disable the status icon in Skype 4 for Andr...

Dear Skypers,
How to disable the status icon in Skype 4 for Android phones?
The guide on this following support page not working anymore: https://support.skype.com/en/faq/FA12359/how-do-i-enable-or-disable-the-status-icon-in-skype-4-for-a...
Older version has the option to disable Skype Status and get rid of the Skype icon on Android status bar. But latest 4.4.0.31835 could not disable Skype Status in notifications settings. :/
Device: Google Nexus 4
Android: 4.3 JWR66Y
Skype: 4.4.0.31835
Please bring back the option to disable the Skype icon on Android status bar. This is the main reason I uninstall Skype. :/
Kudos to the team, the apps is really smooth and fluid to use. Would be nice if you guys are following the Android Design Principles and using Google Cloud Messaging for push notification to improve User Experience and battery life.
Kind regards,
/chrone
everytime i get ahead, i feel more dead.
Solved!
Go to Solution.
Attachments:
how to get rid of skype icon on android status bar.png ‏46 KB

Long click on this notification a sub menu having field "App info" would appear goto App Info. You can goto there by "Manage Apps">"Skype" also.
Uncheck Option "Show Notifications" A dialog will open. Don't worry about notifications for now just click OK. Now the notification icon skype has also been removed.
Now simply check "Show notification again". After doing this you would get notifications but skype icon would not be shown in the status bar anymore.
Issue: this is just a trick you need to repeat this every time sign out and sign in again. Mostly you don't do that so no need to worry.

How could control the scroll events in ALV OO?

Hello experts!
I'm programing a report, inside there is a field that need time of processing. I'm using ALV OO.
I have thought that it could only calculate the field for the lines that visualize.
How could control the scroll events to calculate the field of the visualized lines?
I'm using CL_SALV_TABLE class and cl_salv_events_table to control the events, but there aren't any event to control the scroll.
best regards!

Hi Sriram,
I did view the information that you was attaching, but this don't resolve my problem. With methods get_scroll_info_via_id and set_scroll_info_via_id, we can get and put information of selection and view rows in the screen but we don't control when the user click in the scroll for advance or to back down a page.
I would like to refresh the data in ALV when the user view news rows.
I want your genial ideas.
Best regards!

How to disable the validity of a particular Role for 100 users, in a single

Hi
How to disable the validity of a particular Role
which is assigned to 100 users. (disabling the role of change the validity of the role )
at present am doing manually, by entering into each user and changing the validity of the role
Thanks.

> How to disable the validity of a particular Role for 100 users, in a single ...
... shot?
Assign a reference user to the 100+ users and create events in the factory calendar which assigns and removes the role from the reference user only.
The downside is that it is not scalable for many of the same concepts at the same time, because a dialog user can at one logon time only have one reference user assigned to them.
Cheers,
Julius

UCM - WEBDAV - How to Disable the New Folder option in the action popup

I am trying to implement WebDav functionality. I don't want the users to create folders in the folder mapped to a security group. As long as the user has privilege to contribute to the security group he/she can checkin documents but they should not be able to create folder under it. I did not find documentation as to how to disable the new folder option in the context action menu that pops up on mouse right click. Is there any way we can do that?
Thanx.
Edited by: user10991492 on Nov 1, 2010 11:24 AM

This is the boilerplate text often used in connection to networks in general. It is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe:
If you are opening files over a network or saving them to a network server, please cease and desist immediately in the event you are currently experiencing problems with one or more files.
Working across a network in general is not supported by Adobe.
See:
http://kb2.adobe.com/cps/406/kb406793.html
Copy the CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work. It should.
Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.

Welcome. At the outset, I'm sorry for my English :) Please help with configuration Photoshop CS6 appearance. How to disable the background of the program so you can see the desktop. (same menus and tools) Chiałbym to be the same effect as CS5.

Welcome.
At the outset, I'm sorry for my English
Please help with configuration Photoshop CS6 appearance.
How to disable the background of the program so you can see the desktop. (same menus and tools)
i wantto be the same effect as CS5.

Please try turning off
Window > Application Frame

How to disable the "turn page" event triggered by the scroll/swipe function?

Similar Messages

Maybe you are looking for