How to disable the Unified CCX Historical Reports Scheduler

Hello All,
I'm trying to see if there is a way to disable the Historical Reports Scheduler from Auto-Starting when I boot up the PC (*i.e. My user PC).
The PC is running Windows XP, and the CCX Historical Reports App is running version 8.0(2.13).
I checked for it in services.msc program and also in each user's "StartUp" folder but cannot find where it is getting started from. Anyone know how I can prevent this from Auto-Starting? I don't actually have any reports scheduled and I really on use the Unified CCX Historical Reports app once in a while...
Any thoughts or suggestions would be much appreciated!
Thanks in Advance,
Matt

Hey Carlo, thanks for the reply.
Excellent, that did it! Thanks alot, very much appreciated... I couldn't remember the command to bring up that utility. I've been using Linux for the last few years for the most part and got a little rusty with some of the Windows stuff, so thanks!
Thanks Again,
Matt

Similar Messages

Verifying data coming from Cisco Unified CCX Historical Reports

Good afternoon
I (along with a number of other colleagues) are heavily involved in a project to take data from a wide variety of different sources and merge it all into one system so that we can report on it in a joined-up manner.
The project comprises a number of different types of data source (such as Telephony or CRM). Within each data source type, we have various suppliers of those products. In the case of telephony data (which I'm looking into at the moment), the eventual aim is to make it possible to take data from any of the telephony platforms in use across our business (currently AVAYA, Alcatel and Cisco) and report on it in a uniform way, thus negating the need for an end-user to know what the Cisco definition of AHT is (for example).
The switch I'm currently looking at is a managed switch, meaning that we don't have any sort of direct access to the back-end database(s). We could probably get it, but I suspect that the company that manages it for us would probably charge a small fortune for that. In view of this, I'm working with a number of the standard reports in the Cisco Unified CCX system. My plan (at the moment anyway) is to identify the reports that we can use that will best provide details of all calls into and out of our contact centres. I'd be looking to get the exact details of each individual call, which could then be rolled up into manageable intervals (such as 15-minute or 30-minute).
Before I go much further, I'd like to be clear on something: I'm a database developer rather than a telecoms engineer so if I ask something that appears to be obvious then I apologise in advance. I've got quite a bit of experience of working with the CTI system that sits on top of our AVAYA platform, but it's proving to be a bit of a wrench effectively "un-learning" that system so that I can make room in my head for the Cisco solution.
So, what I've learned (or have guessed) so far is this:
When I run the Application Performance Analysis report, the Application Names that are returned are effectively the Call Routes that are set up in the system. Each Call Route can be fed by one or more Called Number (which I understand to essentially be a DDI);
The Application Summary Analysis report shows the same Application Name information as is shown in the Application Performance Report. However this report also shows the Called Number, thus providing slightly more information about the individual DDI being answered;
My next plan is to try and run an Agent-level report so that I can see exactly which calls each agent handled. This is where I've run into problems: I ran the CSQ - Agent Summary report for the whole of 17th October. I then ran the Agent Detail report for the same period, and ran it out to CSV so that I could "play" with the data. The CSQ - Agent Summary Report shows that a particular agent on a particular CSQ Name (ID) handled a total of 29 calls. However, if I filter the Agent Detail report for that agent and CSQ, I get a total of 30 calls and for the life of me am unable to identify where the missing call is coming from. Initially I'd thought it might be bacause the CSQ in question has two separate DDIs but as far as I can see, this is making no difference.
I NEED to be 100% sure that when I'm importing the data from the Cisco reports into our system, I am then able to mimic the types of reports that are coming from Cisco, with the same figures. Therefore, if anyone can help me, I'll be extremely grateful.
TIA
Ian Henderson

The "Cisco Unified CCX Historical Reports Scheduler" sits in my startup folder but seems like it doesn't "run" at startup. So I ran a "test":
- Manually right-clicked the "Cisco Unified CCX Historical Reports Scheduler" icon in the startup folder and chose "Run as Administrator"
I didn't log off or reboot PC and the reports are running again. I checked the "properties" of the icon and I did make sure it was already set to "Run this program as an Administrator" under the "Compatibility" tab.
Not sure why it's not working...
Thank you for any help you can provide....

Cisco Unified CCX Historical Reports 8.5 - question

Hi all,
Have a question regarding UCCX Historical Reports. Ran daily reports for "Agent Not Ready Reason Code" report for a complete week and exported them to Excel. Excel shows a SUM for daily values that differs from what UCCX shows in Weekly report.
Although it is a slight difference, I would like to know why UCCX and Excel display different values. Would it be due the way UCCX handles decimal value?
Image below shows the sum for the complete week and every one of the daily values
This is what Excel displays as a sum for same daily values:
Thanks so much for the help you can provide

The "Cisco Unified CCX Historical Reports Scheduler" sits in my startup folder but seems like it doesn't "run" at startup. So I ran a "test":
- Manually right-clicked the "Cisco Unified CCX Historical Reports Scheduler" icon in the startup folder and chose "Run as Administrator"
I didn't log off or reboot PC and the reports are running again. I checked the "properties" of the icon and I did make sure it was already set to "Run this program as an Administrator" under the "Compatibility" tab.
Not sure why it's not working...
Thank you for any help you can provide....

Excel formatting issue in Cisco Unified CCX Historical Reports

Hi Team,
We are using Cisco Call Manager 7.1.5.20000-6 & CCX version 7.0(1).
The data report pulled in PDF format is in perfectly alright but when i try to extract in Excel format it gets in destorted format.
The sub-titles dont get reflected, column width & line spacing is not proper.Kindly find the attached files of both the formats.
Plz suggest for the same.
Rgds,
Atul Kaul.

The "Cisco Unified CCX Historical Reports Scheduler" sits in my startup folder but seems like it doesn't "run" at startup. So I ran a "test":
- Manually right-clicked the "Cisco Unified CCX Historical Reports Scheduler" icon in the startup folder and chose "Run as Administrator"
I didn't log off or reboot PC and the reports are running again. I checked the "properties" of the icon and I did make sure it was already set to "Run this program as an Administrator" under the "Compatibility" tab.
Not sure why it's not working...
Thank you for any help you can provide....

Cisco Unified CCX Historical Reports

Hello,
Issue: The time showing on the Historical Reports are not correct
Error message/issue description:
While comparing the recorded calls from QM Management Destop system to the reporting system the timings on the historical reports appear to be at least an hour behind. Can these be synced to show the same times
Thanks !!
Shridhar Reddy

Hi Shridhar,
The time zone displayed in the report is either UTC or local time zone, based on the TIMEZONE settings in hrcconfig.ini. You can also change the time zone for each report as shown in the procedure.
Note: When a report shows date and time information for an event or an activity in the report data, that date and time is based on the TIMEZONE configuration in hrcconfig.ini.
The Start and End time is also based on the TIMEZONE configuration in hrcconfig.ini.
The difference between the server time and the selected time zone is displayed within parentheses beside the Start and End time.
The report generated time displayed at the bottom of the report is the local time of the HR client machine.
To change the time zone for a particular report, follow these steps:
Procedure:
Step 1: In the Unified CCX Historical Reports main window, choose the report settings that you want.
Step 2: Choose the Settings menu.
Note: You notice the check mark beside the Use UTC Time Zone for Reports menu option. This depends on the configuration in hrcconfig.ini.
If UTC time zone (value 1) is configured, the check mark is displayed. If local time zone (value 0 - Default) is configured, the check mark is not displayed. For more details, refer The hrcConfig.ini Configuration File, page 2-13.
Step 3Click Use UTC Time Zone for Reports to select or unselect the option manually.
Please refer the section "The hrcConfig.ini Configuration File" from page 33 onwards in the below link,
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/user/guide/uccx85hrug.pdf
TIMEZONE:
Specifies the time zone that will be displayed in the Unified CCX Historical reports. This value can be preset before you login to Unified CCX Historical Reports client.
You can also change this value from the Historical Reports client user interface.
Valid values: 0 and 1
Value 0 - Historical report will display the time zone of the client’s machine.
Value 1 - Historical Report will display the UTC - GMT time zone.
Default value: 0
Note:The time and date for data in scheduled reports is always the time and date of the Cisco Unified CCX Historical Reporting database which is the UTC time zone.
Please refer the section "Changing the Time Zone to be Displayed for a Report" from page 142 onwards in the below link to do so,
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/user/guide/uccx85hrug.pdf
Hope it helps.
Anand
Please rate helpful posts !!

Customize Cisco Unified CCX historical report.

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin-top:0in;
mso-para-margin-right:0in;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0in;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;}
Hi,
We are using UCCX 7.0. We want to Customize Cisco Unified CCX historical report. For example at Agent Login Logout Activity Report the first four (04) columns are Agent name, Extension, Login Time and Logout time. We want to change the Column order as follows. Login Time, Logout time, agent name and extension. Another thing, we want to add two more columns such as total ready time and total not ready time. So what will be the detailed procedure to accomplish these two tasks. Could anyone please help?
Regards
Fakhrul

This guide outlines how to do this:
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_7_0/programming/guide/uccx70hradmdev.pdf

Cisco Unified CCX Historical Reports with Windows 8

Hello,
Our entreprise has changed this week our OS Windows XP to Windows 8.1.
But, when I install Cisco Unified CCX Historical Reports, I have a problem of compatibility, and I can’t install this software.
I can see that Cisco Unified CCX Historical Reports is end of life with Windows 8.
I would like know if another software able to do reports for our calling centers (numbers of calling receive, missed calls, etc.)?
Cisco Unified CCX Historical Reports actual vesion: 8.0(2.0)
Cisco CCX version 8.0.2
Call Manager version 7.1
Thanks,
Kévin L.

Do you mean like a third party solution? If so, there's many to choose from; just be sure to interview them and ask for a demo before you buy. I'm sure the SMSI folks will reply to this thread.
Anthony Holloway
Please use the star ratings to help drive great content to the top of searches.

The time showing on Cisco Unified CCX Historical Reportsare not correct

Hello,
Issue: The time showing on the Historical Reports are not correct
Error message/issue description:
While comparing the recorded calls from QM Management Destop system to the reporting system the timings on the historical reports appear to be at least an hour behind. Can these be synced to show the same times
Thanks !!
Shridhar Reddy

Hi Shridhar,
The time zone displayed in the report is either UTC or local time zone, based on the TIMEZONE settings in hrcconfig.ini. You can also change the time zone for each report as shown in the procedure.
Note: When a report shows date and time information for an event or an activity in the report data, that date and time is based on the TIMEZONE configuration in hrcconfig.ini.
The Start and End time is also based on the TIMEZONE configuration in hrcconfig.ini.
The difference between the server time and the selected time zone is displayed within parentheses beside the Start and End time.
The report generated time displayed at the bottom of the report is the local time of the HR client machine.
To change the time zone for a particular report, follow these steps:
Procedure:
Step 1: In the Unified CCX Historical Reports main window, choose the report settings that you want.
Step 2: Choose the Settings menu.
Note: You notice the check mark beside the Use UTC Time Zone for Reports menu option. This depends on the configuration in hrcconfig.ini.
If UTC time zone (value 1) is configured, the check mark is displayed. If local time zone (value 0 - Default) is configured, the check mark is not displayed. For more details, refer The hrcConfig.ini Configuration File, page 2-13.
Step 3Click Use UTC Time Zone for Reports to select or unselect the option manually.
Please refer the section "The hrcConfig.ini Configuration File" from page 33 onwards in the below link,
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/user/guide/uccx85hrug.pdf
Also please refer the below thread for changing time zone.
https://supportforums.cisco.com/thread/2145833?tstart=0
Hope it helps.
Anand
Pls rate helpful posts !!

How to disable the reminding dialog when close the webi report viewer

Dear all
How to disable the reminding dialog when close the webi report viewer
Background
When user close the webi report viewer in inforview by click the button in the right-top of the webi report viewer frame. It always prompt a dialog to remind user that the modification will be lost without saving.
But customer need to disable this dialog, and can clost the report viewer directly.
So is there any ways to modify this?
I think it shoule modify some .js file under tomcat, but can not find the solution.
Thanks a lot, any information woulde be appreciated.
David Zhang

I've had the same issue bugging me since installing Snow, er, lion, er, cat, er, cougar, er, Mountain Lion. Incredibly ANNOYING.
It's stupid stuff like this and reverse scrolling that really turn long-timer users off. I'm personally glad Forstall got fired for blunders such as these.
I'm serious peeved that turning off iCloud Documents & Data actually deletes documents and data locally. That's just incredibly stupid.
MANY thanks mende1 for the answer on how to fix it.

How to disable the button in application toolbar in report pgm

Can anyone help with How to disable the button in application toolbar in report pgm

Hi,
You can use it_excluding to disable button on the tool bar.You have to find the function code for the required button and append that function code to the it_excluding .The optional IMPORTING parameter IT_EXCLUDING is an internal table. It is only needed if the caller uses the list tool standard interface but wants to deactivate interface functions which he or she does not need.You can have your defined pf-status using I_CALLBACK_PF_STATUS_SET.
SAMPLE PROGRAM
tables spfli.
type-pools: slis.
DATA W_FCODE TYPE SLIS_EXTAB-FCODE.
data: t_spfli TYPE SPFLI OCCURS 0 WITH HEADER LINE.
select * from spfli into table t_spfli.
data : t_excluding TYPE SLIS_T_EXTAB .
W_fcode = '&OUP'.
append w_fcode to t_excluding.
W_fcode = '&ODN'.
append w_fcode to t_excluding.
call function 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_STRUCTURE_NAME = 'SPFLI'
IS_LAYOUT =
IT_FIELDCAT =
IT_EXCLUDING = T_EXCLUDING
tables
t_outtab = T_SPFLI
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
http://help.sap.com/saphelp_nw2004s/helpdata/en/99/49b844d61911d2b469006094192fe3/frameset.htm
Regards,
Priyanka.

How to disable cache for a particular Report in obiee 10g?

HI
My name is Rani .Learning obiee10g ifaced 1 interview in that they asked me like how u disable cache for a particular report?

In the advanced tab of the report, under prefix you need to mention:
SET VARIABLE DISABLE_CACHE_HIT=1;
Refer below link
http://tipsonobiee.blogspot.com/2009/06/step-by-step-to-bypass-all-caches.html
Thanks

How to download the output of a report along with column header

Hi,
Could someone please tell me on how to download the output of a report along with column header to .txt format. A download option needs to be given to the user using physical and logical file names .The report basically contains header details and item details and requirement is to download the same format into an .txt format.

Hello,
Try this FM:
Data: being of itab occurs 0,
matnr like mara-matnr,
maktx like makt-maktx,
end of itab.
data:begin of fld_tab occurs 0,
fld_name(20),
end of fld_tab.
fld_tab = 'Material'.
append fld_tab.
fld_tab = 'Material Desc'.
append fld_tab.
CALL FUNCTION 'WS_DOWNLOAD'
   EXPORTING
        BIN_FILESIZE            = ' '
        CODEPAGE                = ' '
         FILENAME                = 'C:\1.txt '
         FILETYPE                = 'DAT'
        MODE                    = ' '
        WK1_N_FORMAT            = ' '
        WK1_N_SIZE              = ' '
        WK1_T_FORMAT            = ' '
        WK1_T_SIZE              = ' '
        COL_SELECT              = ' '
        COL_SELECTMASK          = ' '
        NO_AUTH_CHECK           = ' '
   IMPORTING
        FILELENGTH              =
     TABLES
          DATA_TAB                = itab
          FIELDNAMES              = fld_tab
   EXCEPTIONS
        FILE_OPEN_ERROR         = 1
        FILE_WRITE_ERROR        = 2
        INVALID_FILESIZE        = 3
        INVALID_TYPE            = 4
        NO_BATCH                = 5
        UNKNOWN_ERROR           = 6
        INVALID_TABLE_WIDTH     = 7
        GUI_REFUSE_FILETRANSFER = 8
        CUSTOMER_ERROR          = 9
        OTHERS                  = 10
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards,
Naimesh

I have changed the apple ID (email, but on my iphone , the icloud is stil asking me to log in whit the old email.And it is poping-up on every 10 seconds.I never used icloud, and i dont want to use it.I just dont know how to disable the icloud.

i have changed the apple ID (email) but on my iphone , the icloud is stil asking me to log in whit the old email.And it is poping-up on every 10 seconds.I never used icloud, and i dont want to use it.I just dont know how to disable the icloud.

If you see that pop up you enabled icloud. Whether you want or do not want now to use it irrelevant until you actually disable activation lock.
In order to do that you have to change your apple id back to do that just long enough to sign in and back out. System will ask you to verify, don't.
Just sign in on the prompt you getting and then logout. Once done, change apple id to what you have now and verify. Then decide if you want to
use icloud (who does not want to be able to track their phone if lost or stolen).

How to save the data of ABAP report into a notepad in desktop location???

HI all,
Can any one tell me how to transfer the data of ABAP report into a Notepad.
Actually I have to schedule a ABAP report in background on daily basis and I want to transfer the
whole record into Notepad.
If any program is available for this..please clearify the relevent code for transferring.
Thanks
Rajeev

declare a character type internal table.
now move your data from it_data ( internal table with data ) into table itab.
since you are running this report in background, you cannot save it to the desktop. Instead give any app server location
data: itab(400) occurs 0 with header line.
field-symbols: <fs1> type any.
data: gv_file type rlgrap-filename default 'TEST.TXT'.
data: gv_filepath type rlgrap-filename default <path>.
LOOP AT it_data.
    DO 100 TIMES.
      ASSIGN COMPONENT sy-index OF STRUCTURE it_data TO <fs1>.
      IF sy-subrc = 0.
        CONCATENATE itab <fs1> INTO itab SEPARATED BY ' '.
      ELSE.
        EXIT.
      ENDIF.
    ENDDO.
    SHIFT itab LEFT DELETING LEADING ' '.
    APPEND itab.
    CLEAR itab.
ENDLOOP.
concatenate gv_filepath '/' gv_file into gv_file.
OPEN DATASET gv_file FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc = 0.
    LOOP AT itab.
      TRANSFER itab TO gv_file.
    ENDLOOP.
    CLOSE DATASET gv_file.
ENDIF.

How to get the value from another report Customizes Form

Dear all,
I create a report such as
select * from mytable.table1
where field1 = :bind_variable
I create a menu to run this Customized Form and user have to select the bind_variable values. So I have another report created which also want this bind_variable as it WHERE Clause. But I don't want my user to key the same bind variable twice. They can just same the Customized Form and run for both report.
Could anybody know how to get the bind_variable on 1st report and used by the 2nd report.
Thank you very much.
Best Rgds,
SL Voon

Hi,
are you on BI7.0? There you can create variables type replacement path and get the value out from a different variable without any coding.
regards
Cornelia

How to disable the Unified CCX Historical Reports Scheduler

Similar Messages

Maybe you are looking for