How to disable Toshiba Flash Cards pop-up?

Hello!
I have a question:
when i hover my mouse on the upper edge of the screen, a series of shortcuts for different settings appear, like Mute, Lock, Power Plan, etc...
It's really annoying when i watch movies, because i can see a thin white line in the upper edge... so i want to know if i can somehow disable these icons? so they don't appear? i don't use them anyway so...
Here's a screenshot to make it easier for you if you didn't understand my ramblings :)
http://img444.imageshack.us/img444/3656/25134904qm0.jpg
thank you!

Hi
You talk definitely about the Toshiba Flash cards and this feature can be disabled in;
Start -> All Programs -> Toshiba -> Utilities -> Settings for Flash Cards.
Check this and you will find the needed option.
Bye

Similar Messages

Toshiba "Flash Card" problem

1 out of 3 times I boot up my computer, after vista fires up I get an error that Toshiba Flash cards has a problem. Then windows flies off to go seach for a solution and always comes back with none.
Meanwhile, while this 2 minute dance is going on, no other app can be launched. Or, if you do launch a browser or email application, it will freeze up.
Thus far, no upgrades to Vista have solved the problem nor have any Toshiba updates.
Anyone have an idea how to fix this?
Thanks!
Tom

hi tom!
if you already did updates, uninstalled & reinstalled toshiba utilities but still have the problem, try restarting to safemode w/ networking. download toshiba utilities again & install it on the computer. but in case you still have issue, you can disable startup & services options on system configuration utility. in Run box type msconfig. go to the services tab, click the box at the bottom that says hide microsoft services & at then click on disable all. go to startup tab & then click on disable all. close the window & it will ask you to restart the computer. this is just a workaround to isolate your computer from locking up. to undo changes, just enable services & start tab on system configuration utility following same steps above. the exact resolution for this is backing up your data & performing recovery using original recovery cd for this laptop. have a nice day! Ü

Toshiba flash card not responding

I have had my laptop for several years and lately I've been frequently getting the pop-up message 'Toshiba flash card not responding'. It's almost impossible to click away this message. I think there's a relationship between this and the fact that Internet Explorer is slow to start up and sometimes stops running for no good reason when I am online.
How do I fix this?

the toshiba flash cards are the cards that appear at the top of your screen when you rollover it or when you perform a function using the FN button and any of the F keys them not functioning will not cause any problem with your internet explorer but whatever caused the Toshiba flash cards to not work might be making your IE not work

Tecra S5-14R: Toshiba Flash Cards stops working: Runtime Error R6025

Hi all.
Hardware: Toshiba Tecra S5-14R
I have a problem with Toshiba Flash Cards software.
When it starts I've received an error "R6025 - pure virtual function call", and then the microsoft alert that Toshiba Flash Cards software stopped working
I'm using Windows Vista Business 32 bit OS, and I've downloaded new version of Toshiba Flash Cards software (v.2.00.05), but it doesn't solve the problem.
Could somebody help?

Hi
It seems that this error is known to the Microsoft support people and therefore they have published a knowledge base article.
Such error appears also if you would run the software Microsoft Money.
Please try the steps described here:
[Runtime Error: "R6025 -Pure virtual function call"|http://support.microsoft.com/kb/240437]
I would recommend doing this:
1. Disable the Flash cards
2. Click Start, type cmd in the Start Search box, and then press ENTER.
3. At the command prompt, type the following lines one at a time, and then press ENTER after each line:
- regsvr32 softpub.dll
- regsvr32 wintrust.dll
- regsvr32 initpki.dll
- regsvr32 dssenh.dll
- regsvr32 rsaenh.dll
- regsvr32 cryptdlg.dll
- regsvr32 gpkcsp.dll
- regsvr32 sccbase.dll
- regsvr32 slbcsp.dll
4. Enable the Flash Card Utility again

How to disable the graphics card of my macbook air please?

how to disable the graphics card of my macbook air please?

I'm guessing there is a language issue here. The graphics card is the actual hardware (chip) in your computer that allows it to create graphics and show them on your display. There is no way to disable the graphics card on your Air because there would be no way to use it (it would not be able to display anything on any display). This is a little different on machines with multiple graphics processors, but that's not the case with your Air. I'd imagine you know what you want to do, we're just having trouble understanding your question.

How to disable discrete graphics card on dv7?

My dv7 6000 CTO (XW899AV) has been having graphics card issues for quite a while now (frequent screen flashes followed by error notifications), but lately it's gotten a lot worse. Now I get a black screen after just a few minutes of use.
I'm nearly positive the problem lies with the discrete graphics card (ATI 6770M). I'd like to disable the discrete card and only use the integrated Intel HD 3000. Unfortunately the BIOS seems to hide the option to do this. I tried disabling the ATI card in the device manager, but when I rebooted the card was enabled again. Is there a way to disable the discrete card, even though HP seems hell bent on preventing me from doing so? If I can't, the laptop is basically a brick.

Hi zeblonite,
Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I see that you are looking to disable your discrete graphics card. As you have seen that isn't going to work as the notebook is designed to work with both graphics card. What are the error notifications are you getting? If you can give me that exact error message we might be able to fix the cause of the problem. What operating system are you using?
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

How to disable a flash trace in safar & opera browsers.

hi
I have installed flash player (16) debugger version for Mozilla, Now I am getting flash trace in mozilla, safari & opera. I want to disable the flash trace in safari & opera.
Please tell me how to do this.
thanks in advance

Yeah, the debugger is for developers that need to write and debug Flash content. You don't want to use it for general browsing. It's much slower than the release player because of all the tracing, and it shows you everyone else's coding mistakes that didn't get fixed before they shipped (and there are a lot).
So, you'll need to uninstall and move back to a release player. What most of us do is keep the debugger in one browser (like NPAPI Flash Player for Safari/Firefox) for doing web development, and then use another browser with the release player for actually browsing the web (like Chrome). Since we're using two browsers with different plug-in architectures, we can keep them installed in parallel instead of switching back and forth.
Anyway, here's the uninstaller:
Uninstall Flash Player | Windows
http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html
Then just download the regular installer at:
http://get.adobe.com/flashplayer/

How to download adobe flash card to android?

How do I DOWNLOAD ADOBE Flash Card to my Android Tablet?

Hi mirir99820153,
Flash Player is not supported on Android devices.
Maria

How to disable the flash and sound of the camera o...

would I like to know how I do to disable the Flash and sound of the camera of N73?
or does anybody know about some software that makes that?

06-Dec-2008 08:30 AM
krizanand wrote:
hi suman,
i too faced this problem afetr updating it to new firmware,when i checked my application manager there was an application which opens only with the ZIP manager
it was troubling me a lot when i switch off and ON the phone time and again
Finally i did a RESET *#7370# the application was not reflecting in the App manager and the problem got resolved
Hope this works out for u
if it is i will be Glad cheers........... try it
Yes, that will solve all problems and as well as your data. There are alternatives which I already mentioned here. You can search to find the answer, since it to complicate to do it again.
C6-00 with 8GB MicroSD

How to disable other video card?

I have a HP Pavilion g6 1217et model laptop. It getting worse everyday. Using two video cards is killing my computer. I have to disable other video card but it doesnt have a option as the other g6 models have. What can I do?

Posetyus wrote:
There is no option like that.
I mean by saying "killing my computer", my computer gets so hot and starts lagging. There is switch option for apps but I dont think it works. I used to get more FPS from the games, but now. When I see the 25 FPS, I'm crying.
Yes there is an option like that. I made that image while I had my last HP product lioan HP Envy 17-3200ea. It had switchable graphics. You are going to have to dig a little deeper into the Catalyst Control Center options. Which version of CCC do you have installed?
I recommend that you do a search of the forum with switchable graphics as the key words. I and others have gone over the subject ad nauseum and it does not serve a purpose to reinvent the wheel.
How long have you had the Windows installation in place in your notebook?
It may be worth your while to refresh it with a factory recovery if it has been a few years. You can save your game save files to an external disk.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

How to disable Nvidia Graphics card to improve battery life in Bios?

Hi I am trying to figure out how to disable my Nvidia Graphics Card with my Custom Bios. I don't want to tinker with my Bios settings without getting some advice. Thanks!!!! I have MSI GE70 2PE 012US laptop. My custom bios is this version E1759SSS.516.

You can't really disable nvidia graphics as all laptops with dedicated card can't just use Intel HD only..

How to disable 2nd graphic card?

I have a laptop Sony VGN-Z21XN/B with two graphic cards:
1) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
2) 01:00.0 VGA compatible controller: nVidia Corporation G98 [GeForce 9300M GS] (rev a1)
Unfortunately both are running at the same time so my laptop is hot, noisy and the battery is discharged very soon. Is there any possibility how to permanently disable nVidia graphic card somewhere in system? I already tried disable nVidia modules in rc.conf, but without result and google doesn't help
Thank for advice.

I've just checked my bios settings and there is no option to set or disable graphic card. Bios is actually very poor.
The problem is that sony provides only windows (vista and 7, not XP) software switch so there is no HW support for switching... I am looking for something like disable hardware in windows device manager. Simply tell arch: don't use that stupid piece of crap...
However I'll have a look to site that you posted
Last edited by Weri (2011-02-02 19:52:50)

TOSHIBA Flash Cards (AKA Hot Keys, Fn Keys) Operation

ok here is my issue, I have been searching for the last 4 hours, checking all these forums and doing everything they say with no luck at all. My Toshiba Satillite L775D S7340 was recently rebooted to factory specs. how ever now the FN key will not for lack of a better word, disengage. I can't type @ or any of my special chars. up on the numbers row it auto defaults to the FN key on. If I press FN and then the numer 2 I get a 2 and if I press FN + Shigt + 2 then I get my @ symbol but you should be able to turn this off. now yes I have gone into the bios by hitting F2 on boot and nope no setting to shut it off there. I even went in with the HWSETUP and when I went to keyboard the ONLY option it gave me was for wake-up on keyboard. no other options. and hey I even went and checked to make sure I downloaded the MOST CURRENT bios and tried to install it only to get told I was currently running the most current one already. THEN I went and downloaded the FN keys utility and tried to disable it that way, nope. I am at my wits end, please help me get this darn FN to shut off. and yes I tried FN+numlock and FM+shift+Numlock as well.... no help at all. please some one help me get this off so I can use my computer like normal people do! it is hard, I can't even type a 1 with out haveing to get all fingers and tose involved it seems. heck to type this out because I can't even use my space bar on the laptop I had to get another computer before I got upset. PLEASE HELP! I attached a picture of what toshiba says HWSETUP is supposed to look like, well mine doesn't have the top part at all

cbwilsha wrote:
Jerry, look (below) what I have in my Toshiba L775D Windows 10 Device Manager under Keyboards. I've never owned anything made by Lenovo. Lenovo I think is the Maker of the built in mouse. like it might be a toshiba but if you put an Nvidia graphics card in it, it is still a Toshiba laptop. I know Toshiba doesn't make the ram that is used or the hard drive. What I think it happening is that the drivers for the mouse are over laying and it is causing confusion. each part might have it's own manufacture so that might e who made this mouse or the best driver for the mouse is that driver. Though it does say Snyaptics TouchPad Driver on the website. I don't know, all I know is I did those steps as pointed out and my issue is resolved, agian have to do it each time a windows update is done but it does fix my issue and allows me to use the keyboard normally. Take from it what you will......

How to disable the message that pops up every time i connect my iphone "photos in the camera roll of iphone cannot be imported because the device is locked with a passcode"?

Wrongly posted in iPhoto forum, should probably be posted here instead.
I want to remove the message that pops up every time i connect my IPhone that says: "Photos in the Camera Roll of "Name" cannot be imported because the device is locked with a passcode.".
This computer is not one that I want to import photos to (or sync with the iPhone), so this message is just very annoying, and it pops up all the time. I cannot find a way to disable this message. It is constantly appearing. No application is launching, I have turned off the iPhoto launch in the Image Capture app as well as in iPhoto. Thanks in advance if anyone has any information about this.

Because your computer sees your phone, as it would see any digital camera, as long as you have photos in your camera role. Since you state you don't sync with this computer & have a passcode on your phone, that's why you get that message. The only way to prevent that message is either start syncing with this computer; remove the photos from your camera roll prior to connecting; or first turn off your passcode before you connect. Either that, or you live with it.
You shouldn't be storing photos in your camera roll anyway. iPhone camera roll is not designed for photo storage. You should be regularly importing them.

How to disable adobe flash in chrome and use windows adobe X

I keep getting "shockwave flash has crashed" and was told to disable flash player in chrome, but when I do that, videos won't play. I DO have Adobe X installed but chrome won't use it. However, just having it seems to cause a conflict. I have Windows 7 office and Adobe flash player 17 Active X. thanks.

I'm loading CS5 (upgraded from CS3). It's the computer OS that I've had to remove it from before - and it doesn't appear in the Startup folder, unlike in Windows XP's system. (Or in the Control Panel, although there is a "Color Management" folder that lists color profiles I've downloaded from Epson when I downloaded my printer drivers for Windows 7).
So I guess Windows 7 doesn't include it, and I am free to do my calibration. Adobe's tech support phone line is closed for the weekend so I am turning to you forum experts. There must be someone out there who has encountered this in setting up a new computer system and loading PS onto it. Thanks for the input from both you and John.

How to disable Toshiba Flash Cards pop-up?

Similar Messages

Maybe you are looking for