How to disable touch pad on an Envy 17 with Windows 7

I have a new HP Envy 17t laptop running with Windows 7.  I use a mouse.  When typing, I accidently hit the touch pad and all sorts of messiness happens.  How do you disable the Touch Pad.  On other HP computers it was quite easy.

Hi,
Please try
Start > Control Panel > Mouse
Click TouchPad tab
Tick the square box to disable the TouchPad
Click Ok/Apply
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • Satellite A200 - Touch pad doesn't work with Windows 7

    Hello,
    I have an A200 and have upgraded to Windows 7. Can anyone help me with how I can get the touch pad to work?
    I would be very gratefull for any advice.
    Thanks in advance

    Hi,
    Yes I have no function. I have been to the toshiba site but there was no windows 7 driver.
    then to synaptics and downloaded the driver restarted as promted and still not working?

  • How do I PERMANENTLY Disable TOUCH PAD on Laptop? Windows7 64 bit.

    How do I PERMANENTLY disable touch pad on laptop????
    I KNOW how to disable but every time I restart computer - there
    it is ON AGAIN....
    hp pavilion dv7 6c27cl.
    Win 7 64 bit.
    I cant believe I'm going to have to download some software or drives to fix this.
    very frustrating.
    Thank you for any help!!!
    Kim
    This question was solved.
    View Solution.

    Hi Kim,
    See details regarding this under the sub-heading 'Disable the ClckPad' on the document linked to below.
    Configuring The ClickPad.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Hi, how to use touch pad (thinkPad T61) to scroll pages up/down, left/right? do I need any drivers?

    Hi, how to use touch pad (thinkPad T61) to scroll pages up/down, left/right? do I need any drivers?

    Hi daneeo, and welcome to the Lenovo User Community!
    In the Control Panel for your Mouse there should be an UltraNav tab. Under that tab are all the settings for the touchpad. Check to make sure scrolling is enabled.
    If you do not see an UltraNav tab in the Mouse Control Panel, download and install the UltraNav driver and utility:
    http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-66898
    http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67226
    Hope this helps!
    I don't work for Lenovo. I'm a crazy volunteer!

  • How to disable the archive logs in SAP IDES(Windows) using SQL Server

    can any body tell us How to disable the archive logs in SAP IDES(Windows 2003) using SQL Server 2000.SP4.?

    Hi,
    Unfortunately, SQL Server does not have the option to turn off transaction logging. You can set the recovery mode to SIMPLE, instead of FULL. This will result in the transaction log being truncated on checkpoint.
    http://support.microsoft.com/kb/873235 - check this microsoft article
    This will help in reduction of the size of the transcation log.
    - Regards, Dibya

  • How to disable maximize button of the java.awt.Window ????

    How to disable maximize button of the java.awt.Window !!!!
    Help needed

    How to spam the forum with the same fuqin question. Please get lost.

  • How Can I Enable cookies on my PC with windows 7?

    How Can I Enable cookies on my PC with windows 7?

    Hello oguiyke, cookies are enabled by default in Firefox, see: [https://support.mozilla.org/en-US/kb/enable-and-disable-cookies-website-preferences#os=win7&browser=fx23 Enable and disable cookies that websites use to track your preferences]
    also :
    http://kb.mozillazine.org/Websites_report_cookies_are_disabled
    https://support.mozilla.org/kb/Cookies
    thank you

  • How can I get photoshop CS2 to work with Windows 8.1?

    how can I get photoshop CS2 to work with Windows 8.1?

    Have a look at
    http://forums.adobe.com/message/4976720
    Cheers
    John

  • How to set up an clasic TS-desktop with Windows 2012 (R2)?

    Hi,
    How to set up an clasic TS-desktop with Windows 2012 (R2)?
    Witch Roles and Features do I need, RD Session Host, RD Connection Broker, RD Licensing?
    /SaiTech

    Hi,
    Thank you for posting in Windows Server Forum.
    Based on your description provided, I can understand that you want to setup RDS server 2012 R2 and want information how to achieve that. If misunderstood then please correct.
    If yes, then there is different option related to setup. There are 2 option for configuring. 
    1. Role based or Feature based installation
    2. Remote Desktop services installation
    For normal RDS environment, you can use 2nd option and then perform Quick start Deployment where 3 roles can be installed RD Connection Broker, RD Session Host and RD Web access. After this you can also publish RemoteApp and can use. 
    You can refer following article for more information.
    a) Remote Desktop Services (RDS) Quick Start Deployment for RemoteApp, Windows
    Server 2012 Style
    b) Step by Step Windows 2012 R2 Remote Desktop Services – Part 1 
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    TechNet Community Support

  • How do you download itunes onto a hp with windows 8?

    How do you download itunes onto a hp with windows 8?

    iTunes does not yet offically and fully support Windows 8. If you search this forum for "windows 8", you'll find threads with discussions as to how people have done it, though in almost all cases with less than perfect results.
    Regards.

  • Disable touch pad HP ENVY 15t-j000

    How to quickly disable touchpad on HP ENVY 15t-j000?  
    I just got one of the newest Haswell notebook.  With older HP laptop touch pads there is a spot at the upper left corner to disable the touchpad.  With the latest Synaptic touchpad on the new ENVY 15t there is no keyboard or touchpad button to disable the touchpad when you are using a mouse.
    Please advice.
    This question was solved.
    View Solution.

    Hi
    The touchpads on some new notebooks do not have an on/off button go to control panel The touchpad itself does not have a dot or hardware switch toturn on/off. However, you can turn this function on and off from the control panel.
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • Disable Touch Pad, WIN7, 15t or 17t

    After reading several posts:
    I don't see "touch pad settings" under mouse in control panel.
    I want to either:
    1. disable the touch pad so that it stays disabled, even on restart, or
    2. employ the "touch pad disabled" when mouse installed option.
    Many thanks.

    What is the complete product name or product number of your notebook?
     - see This HP web document if you don't how to locate the model number and\or product number.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • B570 - Disable Touch Pad

    The laptop had to be rebuilt due to issues, and since then I've been unable to disable the touch pad, which is resulting in the mouse jumping all over the screen while typing.  An external mouse is used, but need the Touch Pad disabled.  The rebuild does not allow this to be disabled using the F6 key.  Unable to use the manual settings instructions either.  How else can this be disabled?  Thanks.

    What is the complete product name or product number of your notebook?
     - see This HP web document if you don't how to locate the model number and\or product number.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Disabling touch pad on a pavilion 17-f053us running Windows 8.1

    I'm trying to disable the touch pad....  How  do you do it?
    thanks

    Click on the below shown link to find the steps involved in disabling the Touchpad
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03922412
    Hope this helps, for any further queries reply to the post and feel free to join us again
    **Click the KUDOS star on left to say Thanks**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    Thank You,
    K N R K
    Although I am an HP employee, I am speaking for myself and not for HP

  • How to disable touch screen for touchsmart 610

    HP TouchSmart 610
    Windows 7 64-bit
    I need to touch the screen without causing stuff to move.

    Not sure what you ? is since your subjet says : how to disable then your statement in the body of the form says " touch the screen without causing stuff to move" so confused.
    What I suggest is pick your model here from the Model 610 page and look for what your asking within that page on your system.
    http://h10025.www1.hp.com/ewfrf/wc/pfinder?cc=us&d​lc=en&lc=en&tool=&query=touchsmart+610#N194
    Hope it helps

Maybe you are looking for

  • Post Capitalization

    Hi, Can any one tell me the difference between Capitalization date and Acquisition date in asset master creation (AS01). What is the effect of "Post-Capitalization" radio button in AS01, first screen. Thanks, sravankumar help.sap.com and F1 on the fi

  • Report erroring out with 'Invalid parameter requested' in Siebel.

    Hello - I have 9 parameters on a template, excluding the two delivered out-of-the-box by siebel to enter the Language and Locale. Recently, if i enter a language value of 'ESP' ( or any other language value), it errors out with 'Invalid parameters re

  • How do I get to the sleep timer settings on iPad?

    THe very first time I turned on my new iPad, I was offered the chance to change the timeout value of the sleep timer; how many seconds or minutes of inactivity before the iPad puts itself to sleep.  I changed it from 15 seconds to 'Never' and now I c

  • Case Working in "TOAD" but not Working in "WHERE" clause

    Hi Friends, When I am using case in the where clause of SQL query in Oracle Reports 3.0.5, than it is giving me "Error - Rep - 0946 Unable to Parse Query" But when I am running the same query in TOAD it is working fine. select *from inv_stores, inv_p

  • Screen Painter displays nothing and becomes hang.

    <b>Screen Painter displays nothing and becomes hang.</b> To duplicate: 1. Create a new table and fields. (I created using SQL Enterprise Manager). 2. Create a new form using Screen Painter. 3. Bound several items to column to field of table created o