How to disable "Unitilized Volume" Warning ?

I've got multiple operating systems on my mac. Each operating system is on a unique drive. How can I disable the annoying "Uninitilized Volume" warning ?

I assume you did not use Boot Camp for your Windows volume? There shouldn't be a problem, however, because OS X has no problem with Window's filesystems. But it cannot read a Linux filesystem unless it was installed on an MBR partition.

Similar Messages

  • Disabling the volume warning in the music player

    When I raise the volume on my firefox OS device and I have something plugged into the headphone jack, I get an annoying pop-up warning. Where is the setting for disabling this annoyance?

    I only use my firefox os device to listen to music when it is connected to my car stereo. Having to deal with the popup means that I am taking my attention away from operating a vehicle on a motorway, therefor the popup is most definitely NOT doing anything to promote my health and safety, and one could easily argue that by distracting me while driving, the popup is actually putting my life at risk. While I thank you for your opinion, it isn't really relevant to the question of "how do I disable the volume warning popup?".

  • How to disable "Confirm Bounce" warning dialog

    I try to bounce every single piece of junk mail I get, but Mail always puts up a warninng dialog when I do so. How do I turn that warning dialog off?
    Thanks,
    Shaun

    dunno,
    but something related: bouncing is useless... Most sender addresses on spam (>90%) are not real addresses, OR they belong to an innocent person whose email address is being abused. This person will get all those bounces.
    Secondly, if you closely study the (full) headers of a REAL bounce and a FAKE bounce from mail.app (and I did this), then you can see that it is fake... (look at x-mailer, smtp server, message route, etc). What does this tell any smart spammer? That you care enough to send a fake bounce! > prepare to receive even more spam...
    So my unsolicited advise to you is: do not bounce. But of course it's up to you.
    Cheers,
    feddeg

  • How to disable Windows 7 warning on Super-charger.exe?

    Hi,
    I buy a computer from ZT systems. The CPU is: AMD Quad-Core A8-3850 Accelerated Processor, Video graphics is:Radeon™ HD 6550D processor-integrated graphics (Dual monitor capable). From the CD-rom I know the motherboard is from MSI. I reinstall Windows 7 in order to have dual boot capability. I find that every time the computer boots, it asks whether run Super-charger.exe for security. I have check it is safe from "Program Files(x86)\MSI\Super-Charger.exe security property dialogue box (SYSTEM: Full control, Modify, Read & Execute, Read, Write). It still asks every time it boots.
    Could you tell me how to disable Windows 7 asks about Super-Charger security?
    Thanks

    Quote from: Panther57 on 19-April-12, 10:29:56
    In Bios possibly check your boot order? 1st, 2nd, 3rd etc.
    I don't see any help from boot order.
    BTW, How can I know the motherboard model? I bought this computer from Costco. The information I have is: ZT Affinity 7150Ma Desktop PC. I do not find further info from ZT Systems Inc. website.
    Thanks.

  • How to disable IE Security Warning on opening a "local" visio file with Visio Viewer ActiveX?

    Hello all,
    Everyone knows that Microsoft released ActiveX based Visio Viewer for free and allow the users to open Visio drawing and view/print via IE browser.
    The problem that I am facing is that some users are complaining about IE browser's security warning on "active content to run in files on My Computer".
    It means that opening .VSD files from the network, internet, intranet would be all OK but if the user wants to open .VSD files from the local hard drive (or open it as a mail attachment, which will extract it to a temp folder), it prompt the user to select "Allow Blocked Content" EVERYTIME they open them.
    I know that I can GLOBALLY disable this warning by going through Tools - Internet Options - Security section and enable "Allow active content to run in files on My Computer" but I hope that there is a way (or workaround) to allow them by file type or location, etc.
    Questions:
    1. Is there any way to disable those warning for all .VSD only while we still UNCHECK the option on Internet Options?
    2. Is there any 3rd party Win32 based viewer which wouldn't have those restriction?
    3. Is it safe assumption that McAfee VirusScan and Host IPS protection is sufficient enough to remove the IE's security warning feature?
    Thanks in advance?
    Young-

    Are you able to host/launch the VSD file via an HTM page? In that case you can format the HTM page as shown below. This will trick IE into thinking it is loading the file off of a website. Commonly called 'mark of the web'.
    <?xml version="1.0" encoding="utf-8" ?>
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <!-- saved from url=(0014)about:internet -->
    <html>
    </html>

  • How to disable Disk Insertion warning message?

    I'm running OS X 10.4.8 from an external FW drive, reserving the internal HD on my MacBook for Linux. When booting OS X a warning message pops up: "Disk Insertion - The disk you inserted was not readable by this computer" with action buttons Initialize..., Ignore, Eject . This must refer to the internal HD, as OS X apparently can't handle Linux partitions. Hitting Ignore, or waiting a while, makes the message go away.
    My fear is that one of these days I'll hit the Initialize... button by mistake, hosing my Linux partitions in the process. Any gurus out there know how to turn this dangerous (for me) message off?
    N.B. I also posted this message on the MacBook forum, but got no response there... sorry for this, I really want to remove this potential landmine...
    MacBook   Mac OS X (10.4.8)  

    No. If you fail to eject any disk device properly then there's a risk that cached data will not be fully written thus corrupting the device's data.
    This doesn't happen with an iPad or iPod when syncing has stopped because the sync process does not leave cached data unwritten until the device is ejected unless you remove it before a sync has completed. It will happen, however, if you use the iPod in disk mode. The iPad has no default disk mode. You must use a third-party app in order to read or write directly from an iPad. The issue is also academic for iPads and some iPods that do not have disk drives.

  • How to Disable disk eject warning

    I do a lot of importing photos from Compact Flash cards, so much so that I get really tired of ejecting each one after import. I even pull my ipod without ejecting as long as there's no transfer happening. Every time I have to click that I understand the implications of my actions. I there a way to disable the warning? I know what I'm getting myself into and I'm OK with that.
    Thanks,
    Sean

    No. If you fail to eject any disk device properly then there's a risk that cached data will not be fully written thus corrupting the device's data.
    This doesn't happen with an iPad or iPod when syncing has stopped because the sync process does not leave cached data unwritten until the device is ejected unless you remove it before a sync has completed. It will happen, however, if you use the iPod in disk mode. The iPad has no default disk mode. You must use a third-party app in order to read or write directly from an iPad. The issue is also academic for iPads and some iPods that do not have disk drives.

  • How to disable Java Security Warning

    Hello Friends
    I am running different versions of JRE on a machine due to specific application exigencies.
    However I noticed that when entering on the application using the lower JRE Version,the following warning message is being obtained.
    The application requires an earlier version of Java.Do you want to continue.
    I have searched on the net..and someone advised to disable next generation Java Plug in.Apparently it solves the issue.
    But I see several advantages we get by enabling this option.Can we disable it or any other way..I can avoid seeing this warning message.
    Regards
    Kam.

    Hi Stuart,
    in Security Warning is text "The certificate used to identify this application has expired". When selected "More Information" -> "View Certificate Details" an certificate for SAP America Inc is visible. Validity of certificate is:
    [From: Thu Sep 12 03:00:00 EEST 2013,
    To: Fri May 30 02:59:59 EEST 2014]
    When I open Router Maintenance in another SAP ME installation validity of certificate is:
    [From: Thu May 27 03:00:00 EEST 2010,
    To: Sun May 27 02:59:59 EEST 2012]
    Where this certificate is located in application server? Is it in code of SAP ME in application server?
    Is it not possible to renew certificate?`
    Regards,
    - Jukka

  • How to disable security warning while printing(Silent Print) from Javascript?

    We have a webapplication through which, we are creating a pdf document and trying to print it sliently ("Silent Print").
    Users who are having latest Adobe version, were getting javascript warning message. However, those with older versions able to "Silent Print", without any warning messages.
    How to disable this security warning while printing from Javascript?
    Warning message: "A script has requested to print an Acrobat file. This could print an entire document. Do you want to proceed printing?".
    Appreciate for your kind help.
    Thanks.

    It's a security warning so it can't be bypassed by anything within the file.

  • How to get rid of "Warning: Applet Window" in third party java applet code

    Hello I am having a hard time figuring out how to disable this darn Warning applet window that pops up and says "unable to detect an audio device" when it loads onto a comp that has no sound card! It is an audio streaming applet which was discarded by the developer and he does not provide any support for it....
    I know zero about java and I am figuring this is something simple that any typical programmer familiar with java could figure out in five minutes.....
    the applet is called audio centric and is located here:
    http://javaboutique.internet.com/AudioCentric/
    I appreciate anyones time who could help me out!

    Sorry, there is not source code deployed and I'll not encourage you to decompile it, instead contact developer. They will appreciate very much your claim.
    Regards.

  • Disable Network Access Warning

    How to disable Network Access Warning in a flash application
    running on Cd-rom?

    What are you trying todo ?
    Regards
    FlashJester Support Team
    e. - [email protected]
    w. -
    http://www.flashjester.com
    There is a very fine line between "hobby" and
    "mental illness."

  • How to Disable the Process Header, collapsible Area, and Process Warning Bar from Contacts Form of CRM 2013

    Folks,
    How to Disable the Process Header, collapsible Area, and Process Warning Bar from Contacts Form of CRM 2013
    Thank you.

    Hi,
    You can deactivate the business process itself if you do not want at all. So that the header will not available for the entity.
    Regards,
    Priya

  • How to disable safe mode on xperia z1,power and volume button doesn't work

    How to disable safe mode on xperia z1,power and volume button doesn't work

    Hi rafharum,
    Welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
    A simple restart to the device would generally resolve this issue, however if the power key and Volume key are not working they may very well be causing the handset to execute safemode when ever you power the device on.
    If this is the case, you will need to get the handset to a service agent for assessment. Please use the link below to contact Sony Mobile Customer Care directly.
    http://support.sonymobile.com/global-en/contactUs/
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • How to disable security warning on firefox 4

    how to disable security warning on firefox 4

    In particularly their is no disable function provided by mozilla. Their might have been ways in previous versions. But now it's Major topic discussed on the internet. Im having the same problem too, im not able to access some websites, and mostly which is dealt with money and trade.

  • How to disable "This Connection is Untrusted" warning in firefox using shell or perl script running on Linux Platform

    We have QA automation jobs that invoke user interface tests in Firefox running on a virtual Linux host.
    My tests perform regression, but I'm held up because of the Firefox This Connection is Untrusted warning.
    My current requirement is to ignore this connection untrusted warning, which comes up when accessing an HTTPS website and i want this to be disabled through either a shell or a Perl script.
    I can do this manually using the steps below, but this will not work for my current problem since the virtual Linux hosts are created dynamically on submission of automation jobs.
    Go to Tools > Options > Advanced "Tab"(?) > Encryption Tab Click the "Validation" button, and uncheck the checkbox for checking validity.
    Is there any Perl or shell script that disables this certificate warning?

    There might be an add on to accomplish this:
    *[https://addons.mozilla.org/en-US/firefox/addon/skip-cert-error/ Skip Cert Error]
    However if we cannot find a solution there might be another place for support:
    *[https://support.mozilla.org/en-US/kb/where-go-developer-support Where to go for developer support]

Maybe you are looking for

  • 'Use Temporary File' in Receiver File channel

    hi all, I am facing a strange issue with receiver file channel which I am not sure if somene had already faced. I couldnt find any help from blogs..! I have configured the Receiver File channel with Write mode as  'Use Temporary File'  with a tempora

  • Deployment failed due to addition of few components

    Hi Masters, Actually I have deployed my application, it has been deployed properly. Then i have added one more form in the iview. Then when I try to deploy then it is failed. Is there any memory limit to iview. I hope it is the problem I got to know.

  • Load balancing BSSV multiple instances - what is your experience?

    Hi, we encountered an issue: we have three weblogic instances running BSSV Server instances for our JDE. THE BSSV instances are being communicated by SOA mostly and we would like to load balance the traffic between those three bssv servers. The probl

  • Merging anchored frames

    Can someone help me to write simple script to merge anchored frames. That is to put all text form anchored frames to the first one anchored frame on page. Below I sent you two screenshots to describe what I need to do. Thank you in advance for any he

  • How to change text of Customer Data tab in ME21N

    Hi all, I have implemented the screen exit for Tcode ME21N, as a result of which another tab has appeared inthe item level by the text CUSTOMER DATA. Now i want to change the text of this tab? Can any one suggest me how canthis be done? Regards Sabah