How to disable windows protection on multipoint server?

Hi!
I'm trying to install some software on windows multipoint server 2011 (single workstation with six stations). The application woudn't start at all. The system gives a standard windows mesage error with two optinos: stop app or try to find a solution online.
On windows 7 with antivirus software, when trying to copy files from DVD to hard drive, file like install.exe is been deleted with mesage that it is "susspicious". But when I disable it, software is instaled perfectly.
So, I'm not sure if the software has some certificate problem...or whatever.. It is not a virus.
I just want to install it.
How I'm going to disable windows server protection? Or, what should I do?

There should be link with Install anyway option located in right bottom corner. Can you post a screenshot? Did you try to install it with admin privilages?

Similar Messages

  • How to disable or rename Oracle Report Server servlet command?

    Hi,
    I'm using Oracle9i App Server R2.
    I would like to learn how to disable or rename Oracle Report Server's servlet command?
    This is to avoid user from accessing http://myserver/reports/rwservlet/showmap to view the key map file content.
    Please advise.

    or example, my report server was rep_appserver, then i want to rename it to rep_test.
    Here some step to accomplish it,
    1. stop mid-tier
    $ORACLE_HOME\opmn\bin\opmnctl stopall
    2. stop em website
    $ORACLE_HOME\bin\emctl stop iasconsole
    3. rename $ORACLE_HOME\reports\conf\rep_<old_report_server_name>.conf to something else or delete it
    4. rename $ORACLE_HOME\reports\server\rep_<old_report_server_name>.dat to something else or delete it
    5. edit $ORACLE_HOME\reports\conf\rwservlet.properties file then change the SERVER parameter to new report server name(remember this new name has to be a unique name)
    6. create a backup copy of the $ORACLE_HOME\sysman\emd\targets.xml file
    7. open $ORACLE_HOME\sysman\emd\targets.xml, find old report server name and then replace it to new report server name
    8. save new targets.xml file
    9. open $ORACLE_HOME\opmn\conf\opmn.xml, old report server name and then replace it to new report server name
    10. start em website
    $ORACLE_HOME\bin\emctl start iasconsole
    11. start mid-tier
    $ORACLE_HOME\opmn\bin\opmnctl startall
    HTH
    Amkotz

  • How to disable autostart (application) when managed server restart ?

    Hi Ppl,
    How to disable autostart (application) when managed server restart ?
    I want some of the applications to remain not started. In WebSPhere, we have an option disable auto start for applications.
    I don't find in weblogic.
    Thanks

    Hi,
    I agree with Faisal. When you shutdown your WL server while the application is running, the thing is when you start your server again, it would automatically start the application with it. Now if the application was down when you shutdown the server, it _the application_ won't start with the server.
    So it depends on the application last state, when you start your server.
    Regards,
    Mohab

  • How to disable Windows 7 warning on Super-charger.exe?

    Hi,
    I buy a computer from ZT systems. The CPU is: AMD Quad-Core A8-3850 Accelerated Processor, Video graphics is:Radeon™ HD 6550D processor-integrated graphics (Dual monitor capable). From the CD-rom I know the motherboard is from MSI. I reinstall Windows 7 in order to have dual boot capability. I find that every time the computer boots, it asks whether run Super-charger.exe for security. I have check it is safe from "Program Files(x86)\MSI\Super-Charger.exe security property dialogue box (SYSTEM: Full control, Modify, Read & Execute, Read, Write). It still asks every time it boots.
    Could you tell me how to disable Windows 7 asks about Super-Charger security?
    Thanks

    Quote from: Panther57 on 19-April-12, 10:29:56
    In Bios possibly check your boot order? 1st, 2nd, 3rd etc.
    I don't see any help from boot order.
    BTW, How can I know the motherboard model? I bought this computer from Costco. The information I have is: ZT Affinity 7150Ma Desktop PC. I do not find further info from ZT Systems Inc. website.
    Thanks.

  • How to disable extra visit to portal server

    hi Experts,
    I am using wcp11.1.1.8, in a customized page template with portal builder, I used an EL expression to generate link like this:
    "http://localhost/webcenter/portal/Portal1/page1?_adf.ctrl-state=1dvjebskda_596"
    I clicked this link, using httpwatch to monitor network traffic, found IE visited portal server twice: first visit is a "Get" method for ""http://localhost/webcenter/portal/Portal1/page1?_adf.ctrl-state=1dvjebskda_596"", result code is 200, the second visit is a "Post" method for "http://localhost/webcenter/faces/oracle/webcenter/page/scopedMD/s64679523_e5d0_454a_952a_55128e607e07/Page7.jspx?wc.contextURL=/spaces/Portal1&_adf.ctrl-state=1dvjebskda_596", result code is 200.
    If I paste this url "http://localhost/webcenter/portal/Portal1/page1?_adf.ctrl-state=1dvjebskda_596" to ie addressing  field, and press return, httpwatch showed me there is no "second visit" for "/faces/oracle/webcenter/page/scopedMD/s64679523_e5d0_454a_952a_55128e607e07/Page7".
    Seems the "second visit" is auto generated by portal framework, how to disable it?
    Best regards

    Hi.
    Sorry about the delay, I was too busy and I only could do a small testing.
    I was checking quickly how WebCenter Portal (formerly Spaces) works with links compared to Framework Portal.
    The responsible of the "possible twice visit" is the following ViewHandler: oracle.webcenter.webcenterapp.internal.view.navigation.NavigationViewHandler in spaces-model.web.jar (method getPageTargetViewId, getActionURL and also isRedirectRequired).
    First of all, try to check that you're Pages have the "Redirect" checkbox unchecked (or you're navigation-model links). In case of being checked it will be 2 Requests.
    There are following behaviors:
    Using <af:commandLink> just will navigate using PPR and doing a POST.
    Using <af:goLink> using goLinkPrettyUrl there are many behavior:
    Already wc.contextURL is present in the URL and then it will call just one GET.
    If not is present, getActionURL it will add it in order to maintain the correctly the relationship Page - Space. It will generate you're behavior.
    I'm trying to understand why sometimes just call one GET and why sometimes generate a GET,POST,GET behavior.
    Anyway if it's urgent open a SR to Oracle.
    I think that If you try to add to your goLinkPrettyUrl the wc.contextURL parameter it just should do a visit once time (one GET). Try it if you have free time .
    I hope this information helps.
    Regards.

  • How to disable drop down of Report Server

    Hi,
    i had install Report server 2012 and want to move form 2008 to 2012 .
    1) how to disable drop down that show on folder and report level for end user (as shown in following screen shot).
    2) report name coming on report server are not full name how to show full name of report like we have in 2008. Following is screen shot

    Hi Mujahid,
    1.) For migrating from Sql server 2008 to 2012, please follow this links
    Migrating the whole Instance from 2008 to 2012 - > http://msdn.microsoft.com/en-us/library/ms143747.aspx
    Migrating the rdl defination to 2008 to 2012 - > http://msdn.microsoft.com/en-us/library/a1a10c67-7462-4562-9b07-a8822188a161
    2.) We can't disable the drop down box for the reporting services per user basic(end user), If you really want to do it, you
    need to edit the ReportingServices.js file (This will effect all the user including admins) located at C:\Program Files\Microsoft SQL Server\<<SSRS Instance>>\Reporting Services\ReportManager\js\ReportingServices.js
    If you want the end user not to perform certain action, you set appropriated permission for the report.
    Managing Permissions and Security for Reporting Services
    http://technet.microsoft.com/en-us/library/ms156014.aspx
    3.)  When report name is too long it truncated and dot dot are shown in the end. User always have a option to move from Title View to Details View
         You need click on the right side of the report manager preview and click on the detail view to change between detail view and title view
    Regards Harsh

  • How to "Disable Password Protected Sharing" it always switch back (PosReady7)

    Hello,
    I'am trying to disable password protected sharing within PosReady 7? When i'am trying to change it, its switching back.
    I have tried to remove the password from the guest account but also no luck. The computer is not in in the domein.
    Can someone help me with this?

    Also not.
    a workaround: 
    Start - Run - secpol.msc -> Local Policies -> Assign User Rights. 
    "Deny access to this computer from the network" right to search. (Double click)
    correctly, is the user Support_ <number>, but ALL other users (including guest) must be removed

  • How to disable memory protection

    hi
    i am using win 8.1 and ie 11 . i am administrator  on my system but i can not disable memory protection to mitigate online attacks and i tested all the ways in the answers but any of them worked. i have to disable it because of automation software.
    in my office i am using ie8 now. what i have to do to resolve this problem?

    Hi,
    The feature "Enable memory protection to help mitigate online attacks" is already replaced with "Enable Enhanced Protected Mode". You can disable it instead to realize your goals.
    For more infomation about this new feature, you can refer to the link below for more details:
    Enhanced Protected Mode:
    http://blogs.msdn.com/b/ie/archive/2012/03/14/enhanced-protected-mode.aspx
    Roger Lu
    TechNet Community Support

  • How to disable windows dialogue when executing a script

    Hi there.
    I'm trying to automate a task that needs a PSD file to update a layer text.
    For this task my script reads an externar data from www.mydomain.es/resource.cfg.
    Everything has to be done automatically and the script will be programmed to run to a certain hour in my XP machine.
    Data is retrieved, but when  .jsx file tries to run a warning dialog displays in Windows. Something like:
    "Security alert: you are about to execute a script in Photoshop CS4. Do yo want to Continue(button) or Cancel(button).
    This prompt will ruin my script as i need to do everything automatically.
    Does anybody knows how to configure windows, the script or whatever so that the script just executes without asking?
    Thanks so much ofr your help.

    Found the solution:
    I have to place the script in the folder PS CS4 creates for scripts in XP located in documents and settings\user\My Documents\Adobe scripts
    There seems to be a trusted folder and won't display any warning
    •••(spanish lang. translation)
    Encontré la solución:
    Hay que copiar el script en la carpeta que se crea automáticamente al instalar PS CS4 y que se encuentra en documents and settings\usuario\Mis Documentos\Adobe Scripts
    Esa parece ser una zona de seguridad autorizada y no mostrará ninguna advertencia si se ejecuta desde allí

  • How to disable Windows from prompting to enable Network Discovery

    After deploying a new Windows 2012R2 VM, running sysprep,  we then run powershell script to automatically configure a server how we want it.
    One of these steps is to disable the Windows firewall in all profiles with this powershell line:
    Set-NetFirewallProfile -name * -Enabled "false"
    However, when I first login to the server, it prompt me to turn on/off network discovery:
    "Do you want to find PCs, devices, and content on this network, and automatically connect to devices like printers and TVs?"
    If I select "No", it enables the Windows Firewall on the public profile.
    How do I prevent the server from prompting for this information?
    I was thinking off disabling Network Discovery in the powershell script to turn it 'off' but not sure how to do this.
    Thanks

    Hi,
    Did you try the command:
    Disable-NetFirewallRule –DisplayName "Network Discovery"
    https://technet.microsoft.com/en-us/library/jj554843.aspx
    Regards.
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • How to disable battery protection mode on Linux Mint

    I did a frest install of Linux Mint on my newly bought U310, everything went well, except -
    I turned on battery protection mode in windows so that the battery never charges above 60% to preserve battery life span,
    But now on linux mint, the charge on the battery still caps at 60% and there are no options to disable it.
    There doesn't seem to be lenovo drivers for linux either.
    Any help is appreciated.

    You want to look up tpacpi-bat instead for newer thinkpads. 
    https://github.com/teleshoes/tpacpi-bat

  • How to disable Jar cache on Application Server

    Hello,
    I am now developing a Webdynpro Project in the following enviroment:
    Windows 2003 Server 64Bit SP2
    JDK 5.0 Update 12
    Windows x64 Platform
    info at sun Installation Notes , Supported System Configurations
    C:\Program Files\Java\jdk1.5.0_12
    NetWeaver Composition Environment 7.1 (Application Server Java)
    Since I need always change my code wiin a jar file and upload it as a library.
    The default behavior of Application Server is to support java cache locally in JVM. That brings me many problems  (Like can't find new implemented class by dynamical class loader,  ref. http://www.szegedi.org/articles/remotejars.html )
    It there any way to disable JAVA cache on the Application Server?
    Besides, someone told spawning a new JVM for loading the jar may also work. Does our AS support spawning JVM explicitly?
    Message was edited by:
            Zenghuan Shan

    I also want to know if it is possible to disable the cache on server. In my situation, we are deploying the par file (portlet archive) to development server. Could anybody please help?

  • How to disable password protection for Onenote 2013

    I have been trying for a while to disable the ability for users to password protect a section in Onenote 2013.
    I need to have access to all users onenote notebooks within the organization.
    I have tried HKCU\Software\Microsoft\Office\15.0\OneNote\General\PasswordProtectionDisabled = 1 and it didn't work.
    I tried the above solution on the 2010 version and it worked, but instead of it being 15.0 it was 14.0.
    I would greatly appreciate any kind of help.

    Hi,
    Thank you for the reply.
    I would appreciate you could try following the following steps:
    Download ADMX Template for Office 2013:
    >>>There will be a folder named ADMX created with (ADM, admin, admx, exe, .xls & .xlsx files)
    >>>Open admx >>>Copy all the admx files
    >>>Go to C:\Windows\PolicyDefinitions ----Paste all the admx files;
    >>>Come back to ADMX/admx folder/en-us/Copy all .adml files---Paste it in C:\Windows\PolicyDefinitions\en-US
    >>>In run command Type "gpedit.msc"
     gpedit.msc->User configuration->Administrative Templates->Microsoft OneNote 2013->Password >>>Do the necessary changes.
    Once done with above changes, then go to below location & make the necessary settings:
    HKCU\Software\Policies\Microsoft\Office\15.0\OneNote\General
    DWORD: PasswordProtectionDisabled
    Value: 1
    If you still need further assistance, you may need to open a case with Microsoft by either calling
    1-800-865-9408 or can open case online
    http://support.microsoft.com/select/default.aspx?target=assistance
    Thank you for contacting Microsoft Support.
    Have a great day ahead.
    Regards,
    Abhijeet

  • How to disable Windows Sharing -- for real

    To move files between my Mac and PC I used Windows Sharing on my MacBook Pro. It works like a charm.
    To enable I go to System Preferences >> Sharing, check the "Windows Sharing" box, press the "Start" button, and enable Windows Sharing for my OS X user account.
    I can then just type my Mac's IP into Windows Explorer on my XP box and voila, full access to my Mac home directory (after typing in my username and password, of course).
    When I'm done I disable WS by performing the activation steps in reverse, and OS X happily says "Windows Sharing Off." However, I find that even though it's off I can still access my Mac from XP. In fact, I'm not even prompted for my password again.
    How do I really turn off Windows Sharing in 10.4.8? Neither my XP box nor my Mac get restarted often, so if my XP box (the weaker link) was compromised, I don't like knowing that my Mac could be reached so easily with full control.
    Any help appreciated. Thanks.

    Strange, but I'd start of by verifying Permissions with Disk Utility, and if that didn't work I'd try Trashing...
    /Library/Preferences/com.apple.sharing.firewall.plist
    /Users/nnnnLibrary/Preferences/com.apple.internetconnect.plist
    /Library/Preferences/SystemConfiguration/preferences.plist
    Reboot and set everything up again.
    And/Or, get Applejack...
    http://www.versiontracker.com/dyn/moreinfo/macosx/19596
    After installing, boot holding down CMD+s, then when the prompt shows, type in...
    applejack AUTO
    Then let it do all 5 of it's things.

  • EMET + GPO: How to Disable Default Protections

    Hi,
    I have rolled out EMET 4.1 and configured it via GPO. When I first deployed it, Default Protections for Internet Explorer, Recommended Software and Popular Software were activated. Now, after some issues came up I want to configure every
    application myself.
    Now to my problem:
    I can’t deactivate the Default Protections, every time I try to set them to disabled they go back to not configured.
    Does anybody know how to fix this? Also, if these Default Protections are not enabled does EMET then use the Setting from the Registry?

    I have to say that I do not have any experience with configuring EMET via GPO's. I guess you disabled the GPO settings but are the registry values also removed
    under the registry key 'HKLM/Software/Policies/Microsoft/EMET'.
    When you change the EMET GPO and you have updated the policies on the computer with 'gpupdate /Target:Computer /Force' you have to wait a few seconds and use the command "emet_conf.exe --refresh" to update EMET mitigation settings. You can then use the command
    "emet_conf.exe --list" to display all the application mitigation settings for EMET, showing the settings configured locally (EMET_GUI or EMET_CONF) first, followed by the settings configured via Group Policy.
    W. Spu

Maybe you are looking for