How to disable X Server

Hi All,
how can I disable X Server on Oracle Solaris 11 Express 2010.11. I'd like to start only text console, and start X Server manualy when needed.
Best
mp

You have to disable GDM (`svcadm disable gdm`).
If you're using it for a server setup, the best option is to install from the text-install ISO.

Similar Messages

How to disable SQL server 2012 sa password auto reset

We have SQL server 2012 in windows xp and we using sa login and password as null.
My problem is the password automatically reset within 3 hours once,
Anyone can help how to disable the automatically reset password or how to increase the reset time.
Thanks..!!!

SQL Server never changes any password, someone else is doing this. And it is a high risk to use SA account especially with an empty password!!!
Fully agree. A blank password for sa? In 2015?
Apparently something in your environment pokes around for server instances with blank sa passwords and teaches you a lesson. You could set up an event notification or a DDL trigger to find out that may be. Or just prove that you are smarter than them by
renaming sa. Or even better, prove that you are living in the present and set a strong password for sa. Or even better, disable sa, and only use Windows accounts that are in sysadmin so that you know how did what.
Erland Sommarskog, SQL Server MVP, [email protected]

How to DISABLE SSP server to E10000 question on boot

I have installed Solaris 8 on several systems -- E250, E450 and ultra 5.
During a boot, there is a question that is asked -- is this a spp server for E10000 system?
I cannot find documentation to disable the asking of this question or to give some file response so that the boot process finishes.
Thank you.
Henry Gee

1. Re-install without using the Installer CD or Supplemental CD or
2. Boot each disk to single user and pkgrm packages that begin with SUNWssp.
This occured because you used the installation CD and it installed every package on the "Solaris Supplemental"CD.
IF you need something from the Supplemental CD it would be wise to just install it after your Solaris install has completed. This is why many people never use the Installer CD. The just install using disk 1 of 2 and 2 of 2.

How to disable proxy server in my ipad mini?

hi,
i am new using ipad mini. i am currently using internet on my ipad via airtel india sim. but this net connection is working through proxy , which i did not knowso, how can i disable proxy settings in my ipd mini?

Hi there Kenex0909,
You can use iTunes to reinstall iOS 8. Take a look at the article below for more information.
Use iTunes to restore your iOS device to factory settings
-Griff W.

How to disable Wiki Server Welcome emails

I am running OS X Server 10.9.2, and I have a Wiki Server set up. Whenever I give a user access to a Wiki, the user gets an email notification. Is there anyway I can disable those notifications?
I see on previous versions there was an option:
If you want the server to send an email notification to everyone with access to the wiki, select “Send welcome email to new members.”
However, I don't see that option anywhere on this version of the Wiki Server.

Try the OS X Server forum.

How to disable Fax Server printing?

Recently installed and configured a fax server for a client running Server 2008. Users Remote into the server to run their industry-specific software. If they have a need to Fax something out of this application, they change their default printer
setting in the program to the Fax server via Windows Fax and Scan.
The faxes are transmitting and being delivered OK, but there is a copy of every outgoing fax that is printing on a shared network printer. I cannot seem to locate any settings to turn this off and cannot figure out why a copy is being sent to a non-specified
printer. The client does not want ANY copies of these outgoing faxes printed anywhere.
Where can I turn this printing function off for faxes?

Hi John,
Based on current situation, please refer to the following TechNet article and check if you deployed the fax
server correctly. Please also check the configuring outgoing fax settings.
Fax Server Step-by-Step Guide
Meanwhile, please refer to the following article and troubleshoot the fax server.
Troubleshooting: Fax Server
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

How to disable OSX server 3 SMTP authentication

Hi,
I upgraded my 10.5 server to 10.9 OSX server. The mail server is only used internally. I use a HP Multifuntion printer which I often use to scan documents and the printer would mail me the scans in PDF. In 10.9 the user have to authenticate in order to send mail via the SMTP server. Unfortunately the HP printer expects an open SMTP server.
I know that underneath OSX mail server Postfix is running. Is there a way to dissable SMTP authentication so I can us my multifunction printer to mail me the scanned documents again?

MrHoffman,
Thank you very much for pointing me in the right direction. I added my network to the mynetwork parameter and still got an error on the mail server. This was what I found in the log:
NOQUEUE: reject: RCPT from hpprinter.warmoezier.home[192.168.XX.XX]: 504 5.5.2 <NPIB32ACB>: Helo command rejected: need fully-qualified hostname; from=<XXXXXXXXXX> to=<XXXXXXXXXX> proto=ESMTP helo=<NPIB32ACB>
(I removed my mail addresses from the printout. It seems that the HP printer doesnot provide the fqdn in the HELO command.
Then I replaced:
smtpd_helo_restrictions = reject_non_fqdn_helo_hostname reject_invalid_helo_hostname
with:
smtpd_helo_restrictions = reject_invalid_helo_hostname
This solved my problem.
I gues I have to replace the network with the exact printer address in the mynetworks parameter to be on the safe side concerning openrelays in my private network.
I edited the main.cf directly without using the postconf command or should I have used postconf?
Thanks again for sharing your knowledge.
Peter.
P.s.
btw is the command in your post correct?
postconf -c /Library/Server/Mail/Config/postfix mynetworks -e "mynetworks = 127.0.0.0/8, [::1]/128, 10.20.30.40"
shouldn't it be:
postconf -c /Library/Server/Mail/Config/postfix -e "mynetworks = 127.0.0.0/8, [::1]/128, 10.20.30.40"

How to disable the edit Permission after the task approval in project server 2010.

Hi ,
Can this be done.
How to disable the edit Permission after the task approval in project server 2010.
I mean How to Disable approve/Reject Permission Once task approved in project server 2010.
Any Help Would be more than Welcome.

Hi Rohan,
Just talking about the tool capabilities, preventing a task approver (status manager) to approve/reject updates once he has already approved once is not possible out-of-the-box. You grant permissions to user: if you grant a user to approve task updates then
he has the permission to approve updates, no matter if it is the 2nd or 3rd time the task is approved or rejected.
Then of course you could do not custom development to do that.
I'd say that in order to help you, we would need to understand a little bit more your business need. Why do you need to achieve such a goal? We can surely propose you workaround.
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

How to disable extra visit to portal server

hi Experts,
I am using wcp11.1.1.8, in a customized page template with portal builder, I used an EL expression to generate link like this:
"http://localhost/webcenter/portal/Portal1/page1?_adf.ctrl-state=1dvjebskda_596"
I clicked this link, using httpwatch to monitor network traffic, found IE visited portal server twice: first visit is a "Get" method for ""http://localhost/webcenter/portal/Portal1/page1?_adf.ctrl-state=1dvjebskda_596"", result code is 200, the second visit is a "Post" method for "http://localhost/webcenter/faces/oracle/webcenter/page/scopedMD/s64679523_e5d0_454a_952a_55128e607e07/Page7.jspx?wc.contextURL=/spaces/Portal1&_adf.ctrl-state=1dvjebskda_596", result code is 200.
If I paste this url "http://localhost/webcenter/portal/Portal1/page1?_adf.ctrl-state=1dvjebskda_596" to ie addressing field, and press return, httpwatch showed me there is no "second visit" for "/faces/oracle/webcenter/page/scopedMD/s64679523_e5d0_454a_952a_55128e607e07/Page7".
Seems the "second visit" is auto generated by portal framework, how to disable it?
Best regards

Hi.
Sorry about the delay, I was too busy and I only could do a small testing.
I was checking quickly how WebCenter Portal (formerly Spaces) works with links compared to Framework Portal.
The responsible of the "possible twice visit" is the following ViewHandler: oracle.webcenter.webcenterapp.internal.view.navigation.NavigationViewHandler in spaces-model.web.jar (method getPageTargetViewId, getActionURL and also isRedirectRequired).
First of all, try to check that you're Pages have the "Redirect" checkbox unchecked (or you're navigation-model links). In case of being checked it will be 2 Requests.
There are following behaviors:
Using <af:commandLink> just will navigate using PPR and doing a POST.
Using <af:goLink> using goLinkPrettyUrl there are many behavior:
Already wc.contextURL is present in the URL and then it will call just one GET.
If not is present, getActionURL it will add it in order to maintain the correctly the relationship Page - Space. It will generate you're behavior.
I'm trying to understand why sometimes just call one GET and why sometimes generate a GET,POST,GET behavior.
Anyway if it's urgent open a SR to Oracle.
I think that If you try to add to your goLinkPrettyUrl the wc.contextURL parameter it just should do a visit once time (one GET). Try it if you have free time .
I hope this information helps.
Regards.

How to disable easy print in server 2012 r2

how to disable easy print in server 2012 r2

Hi,
To disable RD Easy Print on server 2012 r2, we need to disable the policy setting “Use Remote Desktop Easy Print printer driver first” under following path.
Computer Configuration\Administrative templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Printer Redirection
Please check below article for checking RD Easy print.
http://blogs.msdn.com/b/rds/archive/2009/09/28/using-remote-desktop-easy-print-in-windows-7-and-windows-server-2008-r2.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How to disable SSLv3 and RC4 on Lync Server Access Edge?

We use Lync Server 2013.
How to disable SSLv3 and RC4 on Lync Server Access Edge?
This solution https://technet.microsoft.com/en-us/library/security/3009008.aspx doesn't work

Hi dizen,
To completely disable RC4, you can create the following registry key:
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Ciphers\RC4 128/128]
"Enabled"=dword:00000000
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Ciphers\RC4 40/128]
"Enabled"=dword:00000000
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Ciphers\RC4 56/128]
"Enabled"=dword:00000000
For more details, please check out this KB.
http://support.microsoft.com/kb/2868725
Best regards,
Eric

How to disable or rename Oracle Report Server servlet command?

Hi,
I'm using Oracle9i App Server R2.
I would like to learn how to disable or rename Oracle Report Server's servlet command?
This is to avoid user from accessing http://myserver/reports/rwservlet/showmap to view the key map file content.
Please advise.

or example, my report server was rep_appserver, then i want to rename it to rep_test.
Here some step to accomplish it,
1. stop mid-tier
$ORACLE_HOME\opmn\bin\opmnctl stopall
2. stop em website
$ORACLE_HOME\bin\emctl stop iasconsole
3. rename $ORACLE_HOME\reports\conf\rep_<old_report_server_name>.conf to something else or delete it
4. rename $ORACLE_HOME\reports\server\rep_<old_report_server_name>.dat to something else or delete it
5. edit $ORACLE_HOME\reports\conf\rwservlet.properties file then change the SERVER parameter to new report server name(remember this new name has to be a unique name)
6. create a backup copy of the $ORACLE_HOME\sysman\emd\targets.xml file
7. open $ORACLE_HOME\sysman\emd\targets.xml, find old report server name and then replace it to new report server name
8. save new targets.xml file
9. open $ORACLE_HOME\opmn\conf\opmn.xml, old report server name and then replace it to new report server name
10. start em website
$ORACLE_HOME\bin\emctl start iasconsole
11. start mid-tier
$ORACLE_HOME\opmn\bin\opmnctl startall
HTH
Amkotz

How to disable SNI on Windows 2012 ADFS server?

Hello,
Could you please let me know how to disable the SNI in Widnows 2012 ADFS Server.
Wanted to configure the NetScalers as both proxy and load balancer for ADFS.
Regards
Jay

https://www.sslshopper.com/article-how-to-disable-ssl-2.0-in-iis-7.html
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

How to disable autostart (application) when managed server restart ?

Hi Ppl,
How to disable autostart (application) when managed server restart ?
I want some of the applications to remain not started. In WebSPhere, we have an option disable auto start for applications.
I don't find in weblogic.
Thanks

Hi,
I agree with Faisal. When you shutdown your WL server while the application is running, the thing is when you start your server again, it would automatically start the application with it. Now if the application was down when you shutdown the server, it _the application_ won't start with the server.
So it depends on the application last state, when you start your server.
Regards,
Mohab

How to disable the Directory listing for the whole server or a particular a

Please let me know how to disable the Directory listing for the whole server or a particular application.
Thank You

I want to disable the tab focusing( tab index) for a JTextField objectsLook through the API and find methods with the word "focus" in the method name.
Also can u tell me about how to change the tab index orders for JTextFields."How to Use the Focus Sub System":
http://java.sun.com/docs/books/tutorial/uiswing/misc/focus.html

How to disable X Server

Similar Messages

Maybe you are looking for