How to disabled 'user settings' in ALV by right clicking

Hi,
How to disable the 'user setting' context menu and corresponding popup after right clicking in the ALV.
I already tried parameter wddisableuserpersonalization = X but still I can do a right click and go to user settings.
Hope you can provide the right solution/method etc.
Thanks, John

Hi,
In my opinion this has nothing to do with auth settings... Has everything been transported cleanly?
You should double check the settings on your Acceptance machine, especially considering WD_GLOBAL_SETTING. If User-Personalization is allowed here, it will overwrite everything else.
Maybe also check WD_ANALYZE_CONFIG_USER on Acceptance machine and delete all personalizations for the user you are testing with. I once successfully messed up my Personalization with conflicting entries there...
best regards, Lukas

Similar Messages

  • EREC - How to disable user settings in external job board e recruitment

    Hi All,
    Is there an option to disable the user settings for External Job Boards ? The user settings where candidate can save default keywork search etc (which unfortunately stays for other candidates unless the default value is discarded.)
    Thanks
    Suman

    Hi Suman,
    Please check the following link on how to set up the WDDISABLEUSERPERSONALIZATION parameter:
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/7b/fb57412df8091de10000000a155106/frameset.htm
    and then set up the parameter for the standard hrrcf_a_unreg_job_search and try to run your WD application.
    Hope it helps,
    Kind Regards
    Christine

  • User Settings in ALV - need to disable

    Hi - I need to disable the user settings for ALV, I try from if_salv_wd_std_functions ~ set_dialog_settings_allowed( abap_false ) but is working fine for the screen, if I go to the column and do right click, the user settings are enable at the column level.
    Is there any way I can disable the column user settings?
    thanks!
    Jason P-V

    Hi Jason,
    I simply set the WDDISABLEUSERPERSONALIZATION parameter of my component's apllication to 'X' and now i don't see the usersetting option when I right click even on the column of the ALV. You can try that.
    To do so: double click on your application, go to the parameters tab, make it editable, in the parameters column get 'WDDISABLEUSERPERSONALIZATION' parameter and set its value as 'X'.
    I hope it helps.
    Regards
    Arjun

  • How to disable user account

    Hi,
    How to disable user account after few failed login attempt.
    We have the password policy settings.  But we also like to disable account after 5 failed login attempt.
    thanks

    This function is not available in Connect.

  • How to disable user defined buttons

    hi,
    how to disable userdefined buttons in alv in webdynpro abap.
    thanks and regards,
    Sridevi.D

    Hi,
    Create attribute in context to control enabling/disabling action of a button. Bind this attribute to button. In some action method populate this attibute with boolean values.
    Reward point if useful.
    Regards,
    Karthick S

  • Disabling "User settings" option from all the WDA applications.

    Hello Experts,
    We have implemented SRM business package.We want to disable right click "User settings" option from all the applications presented in SRM BP.
    I know a way of disabling "User settings" by passing WDDISABLEUSERPERSONALIZATION  parameter. We dont want to follow this approach as there are many applications and it would be difficult to change all the applications.
    My question is do we have any settings ( may be in sicf ) which could disable "User settings" centrally for all WDA application on that particular server?
    Thanks
    Surender singh Dahiya

    Hi surender,
    Check this..
    http://help.sap.com/saphelp_nw70/helpdata/en/7b/fb57412df8091de10000000a155106/content.htm
    Cheers,
    Kris.

  • How to enable Fullfillment set menu in the Right click at the line level for a responsibility?, by default it comes for OM ADMIN.

    How to enable Fullfillment set menu in the Right click at the line level for a responsibility?, by default it comes for OM ADMIN.
    for this responsibility i need to have teh sets enabled. how to do teh same.
    similar to OM ADMIN as shown below:
    Kindly advice on teh steps. i believe its some menu /function inclusion can you pl share teh pointer.
    regards,
    bala

    AFAIK then there is no way to do that system wide. You can only do that via userChrome.css or an extension like the Menu Editor per profile .You can install extensions globally, but the user will have to enable them anyway. That is not required for userChrome.css code.

  • SAP MDG - How to activate user settings for Dropdown box Change request?

    Hello Expert,
    I have a question related to Hide DropDown Box Change request.
    When i save change request via collective processing, Change request Dropdown box is displayed. When, i select Change request dropdown list, only change request description is displayed,  not change request number.
    So how to activate access key from user settting ? Could you show me the menu path in order to activate it?
    Best regards,
    RAOELISON

    This is a generic Web Dynpro question and not specific to MDG. Any way, this is how you can do it:
    Right-click the field
    Select: Use Settings --> More
    Check the "Key Visible" checkbox
    Keep in mind this is a user-specific setting and not a global setting.

  • How to disable proxy settings from ipad

    hi i am using airtel india  sim for acessing internet from ipad mini. but my memberships in some accounts has been suspended saying that due to proxy use. but i  did not use any proxy settings n i m using internet via airtel internet. in this regard, i wnt to remove the proxy settings from my device. can any one help me on advising where to find the proxy settings and how to disable them? plz...............

    Proxy settings on the iPad relate only to WiFi (Settings > WiFi). It's possible your mobile operator is using a Proxy. You should talk to them to see if that's the case.

  • How to transfer user settings from one account to another (on the same Mac)

    I'd like to create separate user accounts for "work" and "play" (so that I can do things like have separate address books, etc...). However, I already have LOTS of personalized settings (trackpad behavior, login items, etc) that I'd like to keep the same between the two accounts.
    Is there a way to transfer all of the user settings from one account to another?

    You'll need to copy your /Home/Library folder. Make sure you back up first before doing the following. Log out of both your Work and Play accounts. Log in to a third account with administrator privileges. Assuming you are copying from the account called "work" to the account called "play", enter the following in Terminal:
    sudo rm -rf ~play/Library (this deletes Play's Library folder.)
    sudo cp -R ~work/Library ~play/Library (this copies Work's Library folder to Play's folder.)
    sudo chown -R play ~play/Library (this fixes permissions of Play's new Library folder.)

  • How to disable user iteraction in listview in ADF mobile

    Hi,
    I want to disable user iteraction in listview. When user is click on listview, it will not be selected or highlighted.
    Thanks.

    Hi,
    Always mention your JDev version. Why not using an iterator instead of a list view? AFAIK, you cannot disable list items.
    -Arun

  • How to block user to not to over right Exchange rates

    Hello Experts,
    Can you please tell me how to block a user not to change/over right the system exchange rate during any document posting? is it is possible at all in standard SAP? or do we need any development.
    Thank you in advance.
    Bushan

    after entering the exchange rates, while entering the document it will show the value, if you want to restrict the user to not to change, go to shd0 and change the screen layout, you can restrict.
    regards,

  • How to get a pop-up menu on right click of JTree?

    hi
    My application consists of a JTree.I am having a 2 root nodes each one have some child nodes.in the first root node what i want is on right click of child node i have to display one option that is enabled and on the second root node what i want is on right click of child node i have to display one option that is disabled..
    how to do that
    thanks for your reply in advance,

    When you are creating your nodes, do node.setUserObject(objectName);
    and on right click, do something like this
    if (e.isPopupTrigger() == true) {
             selPath = tree.getPathForLocation(e.getX(), e.getY());
          try {
             // If Right Click, Select the Node
             Object[] selectedPath = selPath.getPath();
             DefaultMutableTreeNode selectedNode = (DefaultMutableTreeNode) selectedPath[selectedPath.length - 1];
             try {
                dataObject = (MyObject) selectedNode.getUserObject(); // Set the Data Object
             } catch (ClassCastException ex) {
                                      ex.printStackTrace();
             // Check for the right click on Framework Node
             if (dataObject.getClass().isInstance(new MyObject()) == true) {
                // Disable the pop-up menu
    ....

  • How do I add entries to PCManFM's right-click menu? [SOLVED]

    Hello there,
    Is there a way to customize PCManFM right-click menu? I'd like to add custom entries, for instance:
    right click a folder and choose "Start slideshow" to get the following command executed: "qiv -smt <selected_folder>"
    Can this be done? How?
    This could be a system-wide setting or a user setting, I don't really care.
    Thanks for any guidance.
    Last edited by brazzmonkey (2009-03-16 20:42:36)

    Inxsible wrote:Yup that's what I am doing, but on selecting an app from the All Applications tab, it creates a .desktop file in my home folder under the .local folder. The next time you try to go into the Open With menu, Geany (or any other app - that I selected from the All Applications list) shows up twice.
    Well , I'm not sure what's the problem here . I only see this when I attach a media player(e.g mplayer) to different file formats . PcManFM seems to insist on creating a .desktop file for each association but I don't see duplicate entries in the menu .
    ~/.local/share/applications$ ls | grep mplayer
    mplayer-usercreated-1-usercustom-0.desktop
    mplayer-usercreated-1-usercustom-1.desktop
    mplayer-usercreated-1-usercustom-2.desktop
    mplayer-usercreated-1-usercustom-3-usercustom-0-usercustom-0.desktop
    mplayer-usercreated-1-usercustom-3-usercustom-0.desktop
    mplayer-usercreated-1-usercustom-3.desktop
    mplayer-usercreated-1.desktop
    smplayer-usercustom-0-usercustom-0-usercustom-0-usercustom-0.desktop
    smplayer-usercustom-0-usercustom-0-usercustom-0-usercustom-1.desktop
    smplayer-usercustom-0-usercustom-0-usercustom-0.desktop
    Last edited by Nezmer (2009-03-16 22:50:28)

  • How to: Send any document using mail via "Right click"

    Hello-
    Does anyone know how to send a document, whether it is a Word, Eccel, Pages doc, etc. via a "Right Click" or similiar key stroke as we can on a WinPC? I am certain it is possible, and the closest commandIi have found is the "Services:Mail" drop down which is seemingly useless (i.e. I do not know how to make use of it). Any suggestions are appreciated. Thx
    MacBookPro 15"   Mac OS X (10.4.6)  

    thexr6,
    Welcome to Apple Discussions.
    Try this if you want to add an attachment to a new mail message:
    1. Open Automator.
    2. In the Library column, click on Mail.
    3. In the Action column, double click on New Mail Message.
    3. In the Action column, double click on Add Attachments to Front Message.
    4. In Automator>File>Save As Plug-In...>Save Plug-in As: (Type your desired name here) Plug-in for: Finder>(Save)
    Right click on the file you wish to attach and select Automator>(your desired name).
    If you know where you actually want to send the message, enter the specific information required in step 3, and add/select "Send Outgoing Messages" after step 3.
    ;~)

Maybe you are looking for