How to disappear transaction tab from PFCG

Hi guys,
I have a question for experts, I have search all the Thread but I couldn't find the answers for this question.
1) How to appear or disappear the transaction tab in PFCG when we create roles we add transactions through menu tab, but I have notice when I was working on existing derived roles I don't see the add transaction tab as well as other tab inside of menu tab, which means I can't add any trans in this derived role through menu but I can't add it manually. Please advise me if there is any setting but I don't think there is anything to do with setting because when I open it up the master role, I can see the Trans tab.
I know it is not a good practice to add transaction through derived role we always push through the master role, but I'm just making sure that it is disappear by default because we shouldn't add transaction through derived role or there is some kind of setting to make it disappear.
Thanks
Faisal

Hello Faisal,
I am not sure whether this helps you further, but I did notice something which might be of interest - so I will put it in the discussion to see whether anyone can make better sense of it than me:
- When you enter PFCG, you can select display mode => in this case the transactions tab is invisible.
- If the role is a derived "child" role, the transaction tab is invisible, even if you selected change mode at the initial selection screen of PFCG.
- If the user is authorized to enter the role in display mode, and only select change mode on the authorizations tab, then another check kicks in to determine whether S_TCODE can be maintained or not.
=> I tracked it down to AGR_FLAGS if the role type is 'CUSTOMIZE'. In this case, object S_TCODE cannot be maintained in change mode.
So... what is required to "flag" a role as 'CUSTOMIZE' and restrict the access to change mode in PFCG to the authorizations tab?
I do not know the answer, but if SAP coded it that way, then I would think that there is a reason.
Cheers,
Julius

Similar Messages

How to open "All Tabs" from previously shown pages history?

Hi,
How to open "All Tabs" from previously shown pages history. I am not asking about "Reopen from last session". I am asking about how to open all tabs from previous webpage links from a past date from history, currently its allowing me to select each page link manually by clicking it.
Thank you!

Select the first item you wish to open, scroll down to the last, Shift-click that one & all those between should be selected too. Double-click on them & they should all start to open... or you can copy & then drag/paste into a new or existing bookmarks folder.

How to upload Transaction data from source system to BI 7.0

Dear friends,
I want to know how to upload Transaction data from source system to BI 7.0.
if anybody having step by step material for this process ,please send it to my
mail id.
[email protected]
[email protected]
Thanks,
D.prabhu

Hi,
it works in the same way as before in case you are not using the new features like the dtp and the transformations. Using the new features, you schedule a infopackage to load the data up to psa and schedule a dtp to post the data to the targets.
regards
Siggi
PS: We want to share knowledge in sdn and not keeping it private by having the information sent to our email adresses.

How do I delete tabs from homepage

How do I delete tabs from home page

You can close individual tabs by clicking them.
You can adjust your Tabs preferences to be the same as mine below:

How do I delete tabs from my IPad

How do I delete tabs from my IPad ?
I have tees sites that have no trash or x to rid them

Hey Joaneaudette. Follow these methods and try it
– Tap the + button at the top right of the Safari screen to add a new tab
– On the new tab screen tap on the ‘Private’ button/word at bottom left
– You’ll get a popup dialog that asks if you want to Close All or Keep All tabs.
– Select ‘Close All’ then tap on Private again and you’ll be back to normal browsing mode with a clean slate and no tabs open.
Hope it helps!

How to hide a tab from the existing tabstrip of CRMD_BUS2000111 transaction

I have to hide competitor tab from the tabstrip of CRMD_BUS2000111 transaction in CRM. I have tried shd0 but since this is not a dialog transaction we cannot create screen variant. After that I tried BUCO transaction.In BUCO I selected Sales Area data then competitors. But when I double click on compititors it is showing a message VCT control for screen configuration does not exist.
I do not have much idea about BUCO. Can any one help me solving my problem?

Friends
With the following command you can register you .ocx ( Visual Buttons Control files ) in windows.
REGSVR32 C:\Progra~1\SAP\FrontEnd\SAPgui\vistransmitter.ocx
The above command will register said file in the registry and facilitate Visual Configurator Tool to run for Screen Sequence Modifications. With the above I also recommend Latest Patch (23), which is available with SAP to update on the windows frontend to avoid some other known frond end issues.
Before doing all above make sure your have 2 files existence in the C:\Progra~1\SAP\FrontEnd\SAPgui folder
Visu_se.exe
vistransmitter.ocx
Best Regards,
Jaswant Purba
[email protected]

How to remove Competetors TAB from PCUI Opportunity create trx

Hi Group,
we are using CRM 5.0, i want to remove Competitor's TAB from PCUI Opportunity Transaction. i see a option in CRMC_BLUEPRINT_C transaction-> Application/Layout->Define layout of the people-centric UI(Customizing tool). here i went to CRMD_BUS2000111-> Version 1-> Static model-> Tabpage groups-> OPP_1: when i clicked on this i got all Tab's details. but when i tried making OPP_HD_COMP "Inactive" and hit Save that Check mark goes away. tried many times but did not help.
then i tried going to CRMC_BLUEPRINT_C transaction->Application element-> tab page group structure->OPP_1: here i dont see any entries. do i have to add all Opportunity Tab's details here or only the Competetor tab details?
Please let me know does anybody see all Tab's data here or you just enter all Tabs data manually in CRM 5.0? also how can i remove Competetors Tab? your help is appreciated and awarded.
regards,
Anu.

Hello Anu,
WHen you are in CRMC_BLUEPRINT_C transaction->Application element-> tab page group structure->OPP_1, go to edit mode and import the standard entries from CRMC_BLUEPRINT (on of the buttons on the screen).
Then, for the tab you don't want to see, just put it as inactive (if not possible, just delete the line, you can always come back to the standard by importing the S tables again).
Regards,
Frédéric

How do I move tabs from one window to another window?

With the previous version of firefox, I could drag a tab from one window to another window. (and if there was only one tab left in that window, it would automatically close that window because there were no more tabs open in it)
With the latest version of firefox, '''How do you drag or move a tab from one window to another window'''

Hi,
To move to the next tab it's '''Ctrl''' + '''Tab''' or '''Ctrl''' + '''Pg Dn''' (Page Down). To go to the previous tabs (reverse order) it's '''Ctrl''' + '''Shift''' + '''Tab''' or '''Ctrl''' + '''Pg Up''' (Page Up) keys. More about this and other keyboard shortcuts [https://support.mozilla.com/en-US/kb/Keyboard%20shortcuts here.]

How can I stop tabs from "constantly" "reloading" themselves?

Starting with the Firefox 4 update, tabs appear to keep repeatedly "reloading" themselves somewhat, bogging down my computer quickly when several tabs are open. How can I disable the tabs from "constantly" (or very frequently) "reloading" themselves? I much prefer using the refresh option when I want them reloaded or updated.
Problem History and Effects:
Before Firefox 4, I could have many tabs (like 30 or 50) open without a problem. With Firefox 4 (and Firefox 5 to, what so far appears to be, a slightly lesser degree), my computer begins slowing down significantly for each tab after about 5 (or when Firefox and "plugin-container.exe" max out my CPU usage), and takes over 10 or 40 seconds to load a page after about 10 or 15 tabs, instead of only 1 second. When I have a large number of tabs open now, at any given moment, most of them say "Connecting..." in the tab title (the same as they say, for at least a moment, when the page/tab is first opened).
Clarification of "Reloading":
I keep referring to the tabs as repeatedly reloading, but I don't really know what they're doing; they just seem like that's what their doing, since they frequently change their page title (or name of the tab) to "Connecting..." and they seem to put a load on my computer that, as far as I can tell, is like the page is loading anew, or has been refreshed. I haven't actually noticed any changes in the pages when they do this thing that seems like some sort of reloading to me, so it obviously, and thankfully, isn't doing the same thing pressing F5 does. Random things like advertisements, or the friends being featured on someone's Facebook page, would change when pressing F5, but they don't with this problem I'm describing.
Closing:
In general, I'm very pleased with Firefox, but this feature has been hampering me greatly. I searched for ways to disable it, but didn't find any. It might help if I knew what it's called, and exactly what it's doing.
Thank you.

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

How to copy a tab from one tab group to another?

In Tab groups view, drag and drop allows one to move one tab from one group to another. But how to copy a tab?

Press '''CTRL''' while dragging to copy instead of moving.

How can stop random tabs from opening in safari!

I have a MacBook Pro 15" retina display2.4 GHz Intel Core i7 Processor and 8GB of space. I've been using safari 7.0.5. Almost every time I click on something in safari, a new tab opens. It's usually an advertisement or sign up page for a dating website. It's getting extremely annoying and I want to know how I can stop them from opening. I've already tried blocking pop up windows in preferences and it hasn't done anything. Please help!

You may have installed the "DownLite" trojan, perhaps under a different name. Remove it as follows.
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "VSearch" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot" or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
This trojan is distributed on illegal websites that traffic in pirated movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the DownLite developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

How to find Transaction code from Report/program name ?

Dear all,
How to find Transaction code if i know Report/program name ?

Hi,
In se 38 when u open ur program,in the application toolbar u have a button beside the where-used list button as display object list.on clicking this button,a window will be opened at the left most corner for repository browser,in this u can find any tranasctions,fileds,screens,dictionary structures defined for the program.
if any transaction is created for the program u can find it under the transaction folder.
revert back for further queries.
Regards,
Sravanthi

How do I clear tabs from last time

I can't close the tab from last time

Hi,
I understand that you cannot close the tab from last time. You can tap on the plus sign in the top right corner of the browser to open all of the tabs. Then swipe to the right to clear the tabs. [[Using Tabs on Firefox for Android]]
Unfortunately if you clear data, all data is removed, not parts.

How to call transaction PC00_M10_CDTC from webdynpro?

Hi all,
I am newbie to webdypro. I need a step by step guidance on this. I have come across a solution by Vishal Kapoor as followed. But I need more elaboration on the steps.
1: Call below method to get host, port and protocol
cl_http_server=>if_http_server~get_location
2: concatenate protocol '://' host ':' port '/sap/bc/gui/sap/its/webgui/?sap-client=&~transaction='your tcode name' into url
3: get the window manager as we are opening t code in external window.
DATA lo_window_manager TYPE REF TO if_wd_window_manager.
DATA lo_api_component TYPE REF TO if_wd_component.
DATA lo_window TYPE REF TO if_wd_window.
lo_api_component = wd_comp_controller->wd_get_api( ).
lo_window_manager = lo_api_component->get_window_manager( ).
4: Call the url which we created above
lo_window_manager->create_external_window(
EXPORTING
url = url
RECEIVING
window = lo_window ).
The T code will be executed using the integrated ITS
Questions:
1. what ui element do i need? (link to url?)
2. Where do i put in this chunk of codes? ( create a abc method?)
3. How can I trigger this piece of code from the ui element? ( the connection/link between the ui element and method)
Thanks all in advance.
Edited by: Siong Chao on Mar 22, 2010 5:22 AM
Edited by: Siong Chao on Mar 22, 2010 5:25 AM

Hi,
1. First decide when you have to call this transaction.. I mean which UI element must be used..ie whether on clicking a link ( either link to Action or Link to URL UI element ) or just need to call after a pressing a button(UI element ) likewise..
2. Suppose If you are using a link to action UI element, give some text in the Text property and create an event in OnAction method..
3. Double click that method and wrote the coding u want.. I mean as u mentioned before.. For example
i have used
   DATA LO_COMPONENTCONTROLLER TYPE REF TO IG_COMPONENTCONTROLLER .
LO_COMPONENTCONTROLLER =   WD_THIS->GET_COMPONENTCONTROLLER_CTR( ).
    DATA LO_API_COMPONENTCONTROLLER TYPE REF TO IF_WD_COMPONENT.
    LO_API_COMPONENTCONTROLLER = LO_COMPONENTCONTROLLER->WD_GET_API( ).
DATA LO_WINDOW_MANAGER TYPE REF TO IF_WD_WINDOW_MANAGER.
CALL METHOD LO_API_COMPONENTCONTROLLER->GET_WINDOW_MANAGER
    RECEIVING
      WINDOW_MANAGER = LO_WINDOW_MANAGER.
DATA LO_WD_WINDOW TYPE REF TO IF_WD_WINDOW.
CALL METHOD LO_WINDOW_MANAGER->CREATE_EXTERNAL_WINDOW
    EXPORTING
      URL           =
'http:<domain>/sap/bc/gui/sap/its/webgui?~TRANSACTION=<urtransaction name>'
     TITLE          = 'Display Material'
*    MODAL          = ABAP_FALSE
*    HAS_MENUBAR    = ABAP_TRUE
*    IS_RESIZABLE   = ABAP_TRUE
*    HAS_SCROLLBARS = ABAP_TRUE
*    HAS_STATUSBAR = ABAP_TRUE
*    HAS_TOOLBAR    = ABAP_TRUE
*    HAS_LOCATION   = ABAP_TRUE
    RECEIVING
      WINDOW         = LO_WD_WINDOW.
LO_WD_WINDOW->open( )
Suppose if u want to create a Link to URL UI element.. Just create it and pass URL to the Reference Property of that.. Ur URl will automatically called in new window..

How to stop new tabs from opening while using safari?

When I am using safari random pages will open in new tabs and i am constantly having to close the tabs. How can I stop this?

There is no need to download anything to solve this problem.
You may have installed the "VSearch" trojan, perhaps under a different name. Remove it as follows.
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Reset the home page and default search engine in all the browsers, if it was changed.
Step 2
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Internet criminal behind VSearch has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

How to disappear transaction tab from PFCG

Similar Messages

Maybe you are looking for