How to disapper/apper BLOCK in selection screen

could anyone advice,
I have two RBs and one Block with some parametes in SS,
If I click on one,entire block has to apper.
IF I click on second one,entire block has to disappear.
Thanks in advance...

Hi Reddy,
Try following code.
PARAMETERS: p_fidoc RADIOBUTTON GROUP obj USER-COMMAND u1 DEFAULT 'X'.
PARAMETERS p_gjahr LIKE bkpf-gjahr MODIF ID fi.
PARAMETERS p_monat LIKE bkpf-monat MODIF ID fi.
Company
PARAMETERS: p_rcomp LIKE t882c-rcomp MODIF ID fsl.
General Ledger
PARAMETERS: p_rldnr LIKE t881-rldnr MODIF ID fsl.
IF p_fidoc = 'X'.
    LOOP AT SCREEN.
      IF screen-group1 = 'FI'.
        screen-input = '1'.
        screen-invisible = '0'.
        MODIFY SCREEN.
      ELSEIF screen-group1 = 'FSL' .
        screen-input = '0'.
        screen-invisible = '1'.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
endif.
-Anu
Message was edited by: Anupama Reddy

Similar Messages

How to hide a block in Selection screen ?

Hello abap gurus,
I have a requirement where I have to hide a block on Selection screen. Can anyone of u give the command for that or code..
Its urgent !
Om Sai Ram,
aRgD

Hi,
Just paste the following code in abap editor.
*Selectionscreen elements..............................................
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
PARAMETERS:
p_uname     LIKE sy-uname
              MODIF ID bl1.            " User name
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME.
PARAMETERS:
p_fname(10) TYPE c MODIF ID bl2
                     OBLIGATORY,       " First name
p_lname(10) TYPE c MODIF ID bl2
                     OBLIGATORY,       " Last name
p_empid(5) TYPE n MODIF ID bl2
                     OBLIGATORY.       " Employee id
SELECTION-SCREEN END OF BLOCK b2.
*" Data declarations...................................................
Work variables                                                      *
DATA:
w_uname     LIKE sy-uname.           " User name
             AT SELECTION-SCREEN OUTPUT EVENT                       *
AT SELECTION-SCREEN OUTPUT.
PERFORM validate.
            AT SELECTION-SCREEN ON FIELD EVENT                      *
AT SELECTION-SCREEN ON p_uname.
PERFORM validate_uname.
                  END OF SELECTION EVENT                            *
END-OF-SELECTION.
PERFORM output.
FORM VALIDATE                                                      *
This subroutine disables all parameters if user name is not        *
initialized or user name is not valid.                             *
There are no interface parameters to be passed to this subroutine. *
FORM validate.
w_uname = sy-uname.
IF p_uname IS INITIAL OR p_uname NE w_uname.
    LOOP AT SCREEN.
      IF screen-group1 EQ 'BL2'.
        screen-active = '0'.
      ELSE.
        screen-active = '1'.
      ENDIF.                           " IF screen-group1 EQ 'BL2'.
      MODIFY SCREEN.
    ENDLOOP.                           " LOOP AT SCREEN.
ELSEIF p_uname EQ sy-uname.
    LOOP AT SCREEN.
      IF screen-group1 = 'BL1'.
        screen-active = 0.
        MODIFY SCREEN.
      ELSEIF screen-group1 = 'BL2'.
        screen-active = 1.
        screen-output = 1.
        screen-input = 1.
        screen-invisible = 0.
      ENDIF.                           " IF screen-group1 = 'BL1'.
      MODIFY SCREEN.
    ENDLOOP.                           " LOOP AT SCREEN.
ENDIF.                               " IF p_uname IS INITIAL...
ENDFORM.                               " VALIDATE
Form VALIDATE_UNAME                                                *
This subroutine gives error message and validates the user name.   *
There are no interface parameters to be passed to this subroutine. *
FORM validate_uname .
IF p_uname IS INITIAL.
    MESSAGE 'Enter the user name'(001) TYPE 'E'.
ELSEIF p_uname NE sy-uname.
    MESSAGE 'Authorization unsuccessful'(002) TYPE 'E'.
ENDIF.                               " IF p_uname IS INITIAL.
ENDFORM.                               " VALIDATE_UNAME
Form OUTPUT                                                       *
This subroutine is used to print the output.                       *
There are no interface parameters to be passed to this subroutine. *
FORM output .
IF p_fname IS NOT INITIAL.
    WRITE: / 'First name:'(003),p_fname.
    WRITE: / 'Last name:'(004),p_lname.
    WRITE: / 'Employee id:'(005),p_empid.
ENDIF.                               " IF p_fname IS NOT INITIAL.
ENDFORM.                               " OUTPUT
I think this solves your problem.
Reward if it helps you.....
Regards,
Sandhya

How to hide particular block in selection screen

Hi,
I am having different blocks in a selection screen.
How to show the blocks dynamically according to a radio button selection.
means how to Hide/show entire block.
Thanks,
anandan

Hi Anandan,
Try this program.
REPORT zvk_collect.
SELECTION-SCREEN : BEGIN OF BLOCK b1 WITH FRAME NO INTERVALS.
PARAMETER : p_plant RADIOBUTTON GROUP g1 USER-COMMAND radio DEFAULT 'X',
                  p_mrp   RADIOBUTTON GROUP g1.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME NO INTERVALS.
PARAMETER : p_werks TYPE marc-werks MODIF ID sp1.
SELECTION-SCREEN END OF BLOCK b2.
*SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME NO INTERVALS.
*PARAMETER : p_berid TYPE smdma-berid MODIF ID sp2.
*SELECTION-SCREEN END OF BLOCK b3.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    CHECK screen-group1 = 'SP1' OR
          screen-group1 = 'SP2'.
    IF p_plant = 'X'.
      IF screen-group1 = 'SP2'.
        screen-input = 0.
        screen-active = 0.
        screen-required = 1.
        MODIFY SCREEN.
      ENDIF.
    ELSE.
      IF screen-group1 = 'SP1'.
        screen-input = 0.
        screen-active = 0.
        screen-required = 1.
        MODIFY SCREEN.
      ENDIF.
    ENDIF.
ENDLOOP.
Execute with Comments ON and Without Comments and See the difference
Reward if found helpful

Hide / Show a block in Selection screen

Hi,
How to hide or show a block in selection screen.
Plz help.
Regards,
Sriram

REPORT ZTESTETSET.
02.
03."First we create the selection screen which contains 2 option
04."buttons For show and hide.
05.
06. SELECTION-SCREEN BEGIN of BLOCK screen1 WITH FRAME TITLE title1.
07. PARAMETERS: Show RADIOBUTTON GROUP opt USER-COMMAND aaa DEFAULT 'X',
08.              Hide RADIOBUTTON GROUP opt .
09. SELECTION-SCREEN END OF BLOCK screen1.
10.
11. "This is the selection screen that we will hide and show
12. "based on the selected option button above
13.
14. SELECTION-SCREEN BEGIN of BLOCK screen2 WITH FRAME TITLE title2.
15.      PARAMETER CONNID like spfli-connid.
16. SELECTION-SCREEN END OF BLOCK screen2.
17.
18."We capture the selected option event using
19."AT SELECTION-SCREEN OUTPUT to modify the screen
20.
21.   AT SELECTION-SCREEN OUTPUT.
22. PERFORM modify_screen.
23.
24. START-OF-SELECTION.
25.
26."This is the sub program that will loop all the elements on
27."the selection screen to identify which element we want to
28."hide or show based on screen name.
29.
30. FORM modify_screen .
31. LOOP AT SCREEN.
32.    IF Show NE 'X'.
33.      IF screen-name CS 'CONNID'.
34.        screen-active = 0.
35.        MODIFY SCREEN.
36.      ENDIF.
37.    ENDIF.
38. ENDLOOP.
39.ENDFORM.
40.
41."Give the selection block a title.
42.INITIALIZATION.
43.
44.title1 = 'Show/Hide Option'.
45.title2 = 'Selection Screen'.
Thanks
anurag Srivastava

How to default date values in Selection Screen

Hi everyone,
I would like to display the 1st day of the previous month into the I_GSTRP-LOW field and the last day of the current month into the I_GSTRP-HIGH field.
For example, this in the 5th month of the year (May), therefore, in the selection screen it should appear like this:
Basic Date: 01.04.2006 to 31.05.2006
How do i do it?
*& SELECTION-SCREEN *
SELECTION-SCREEN BEGIN OF BLOCK 1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS:
I_AUFNR FOR AFIH-AUFNR, "ORDER NUMBER
I_GSTRP FOR AFKO-GSTRP, "BASIC DATE
I_BUDAT FOR AUFM-BUDAT, "POSTING DATE
I_IWERK FOR AFIH-IWERK DEFAULT '6010' OBLIGATORY, "PLANNING PLANT
I_ARBPL FOR CRHD-ARBPL, "WORK CENTER
I_ERNAM FOR AUFK-ERNAM, "CREATED BY
I_MATNR FOR RESB-MATNR, "MATERIAL
I_KTEXT FOR AUFK-KTEXT. "EQUIPMENT
SELECTION-SCREEN END OF BLOCK 1.

Here is the code to populate default values,as per your requirement.
data : V_date type sy-datum,
 v_month(2) type c,
 v_low_value(8) type c,
 v_high_value(8) type c,
 v_month1(2) type n,
 V_NO_OF_DAYS type T009B-BUTAG,
 v_curr_month type T009B-BUMON,
 v_curr_year type T009B-BDATJ.
 select-options : i_gstrp for sy-datum.
initialization.
v_date = sy-datum.
v_month1 = v_date+4(2) - 1.
write v_month1 to v_month.
concatenate v_date+0(4)
v_month
'01'
into v_low_value.
I_GSTRP-LOW = v_low_value.
v_curr_month = sy-datum+4(2).
v_curr_year = sy-datum+0(4).
CALL FUNCTION 'NUMBER_OF_DAYS_PER_MONTH_GET'
EXPORTING
 par_month = v_curr_month
 par_year = v_curr_year
IMPORTING
 PAR_DAYS = V_NO_OF_DAYS
concatenate sy-datum+0(6)
V_NO_OF_DAYS
into v_high_value.
I_GSTRP-HIGH = v_high_value.
I_GSTRP-sign = 'I'.
I_GSTRP-OPTION = 'EQ'.
APPEND I_GSTRP.
regards
srikanth

How to hide F8 function on selection screen.

Hi,
How to hide F8 function on selection screen.

Just create a customer status and SET this status in your INITIALIZATION block.
You can copy the standard status from program RSSYSTDB status %_00.
Regards

How we can assign the customised selection screen to report category

hai
gurus
how we can assign the customised selection screen to report category

Hi Naresh,
You can do like this.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN BEGIN OF BLOCK SELECTION WITH FRAME.
SELECT-OPTIONS: S_FKART FOR VBRK-FKART.
SELECT-OPTIONS: S_FKDAT FOR VBRK-FKDAT OBLIGATORY.
SELECT-OPTIONS: S_VBELN FOR VBAK-VBELN.
SELECT-OPTIONS: S_AUART FOR VBAK-AUART.
SELECTION-SCREEN END OF BLOCK SELECTION.
SELECTION-SCREEN END OF BLOCK B1.
if you give me brief i can help you out more.
Thank you .
Regards
Ram

How to fill internal table with selection screen field.

Hi all,
i am new to sap . pls tell me how to fill internal table with selection screen field.

Hi,
Please see the example below:-
I have used both select-options and parameter on the selection-screen.
Understand the same.
* type declaration
TYPES: BEGIN OF t_matnr,
        matnr TYPE matnr,
       END OF t_matnr,
       BEGIN OF t_vbeln,
         vbeln TYPE vbeln,
       END OF t_vbeln.
* internal table declaration
DATA : it_mara TYPE STANDARD TABLE OF t_matnr,
       it_vbeln TYPE STANDARD TABLE OF t_vbeln.
* workarea declaration
DATA : wa_mara TYPE t_matnr,
       wa_vbeln TYPE t_vbeln.
* selection-screen field
SELECTION-SCREEN: BEGIN OF BLOCK b1.
PARAMETERS : p_matnr TYPE matnr.
SELECT-OPTIONS : s_vbeln FOR wa_vbeln-vbeln.
SELECTION-SCREEN: END OF BLOCK b1.
START-OF-SELECTION.
* I am adding parameter value to my internal table
wa_mara-matnr = p_matnr.
APPEND wa_mara TO it_mara.
* I am adding select-options value to an internal table
LOOP AT s_vbeln.
    wa_vbeln-vbeln = s_vbeln-low.
    APPEND wa_vbeln TO it_vbeln.
ENDLOOP.
Regards,
Ankur Parab

How to accept multiple attachments on selection screen?

Hi All,
I need to know how to accept multiple attachments on selection screen and send them as email to external system (outlook).
Basically, my req is to send a common email with attachments to certain users. These users are displayed in ALV. User will select ALL or specific user from ALV and send an email with message entered on selection screen.
I used text editor control to input message body. I need to know how to accept attachments and send them.
Appreciate any inputs.
Thanks,
SKJ

SAP uses a nifty little button called 'Object Services' on ME23N (top left) which you can use to attach documents to business objects.
http://help.sap.com/saphelp_nw70/helpdata/EN/be/3fe63659241157e10000009b38f889/frameset.htm
It's a complicated way of doing it but might give you extra functionality in the long run.

HOW TO PASS THE DATA FROM SELECTION SCREEN TO STANDARD TRANSACTION?

HI,
HOW TO PASS THE DATA FROM SELECTION SCREEN TO STANDARD TRANSACTION?
thanks,
samba.

By selection screen, what do you mean? There is no selection screen in WDA as there was in classic dynpro. Do you mean you are using the Select-Options reusable component? Are you wanting to call a standard transaction via ITS - SAPGUI for HTML? Please provide more details to your question.

How to disable save button on selection screen (1000) run from other report

Hi Experts,
Can any one let me know how to disable save button on selection screen (1000) run from other report.
Say I am running from report R1 which submits report R2, but the save button should be disabled on
report R2(selection screen 100).
Thanks in advance.
Regards
RP.

Hi RPReddy16 ,
Try this:
DATA :BEGIN OF t_extab occurs 0,
fcode like rsmpe-func,
END OF t_extab.
REFRESH T_EXTAB.
MOVE 'SAVE' TO T_EXTAB-FCODE.
APPEND T_EXTAB.
CLEAR T_EXTAB.
SET PF-STATUS 'STATUS' EXCLUDING T_EXTAB.
Regards,
José

How to make a field in selection screen as READ_ONLY !!

Hi,
   How to make a field in selection screen as READ_ONLY !!.
Thanks,
Senthil

This is the code you need to have in your program.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF SCREEN-NAME = 'MYSELFLD'.
    SCREEN-INPUT = 0.
    MODIFY-SCREEN.
ENDIF.
ENDLOOP.

How to hide input fields on selection screen using variant attribute

Hello all,
I want to know how to hide input fields on selection screen using variant attribute conpletely.
As you know, when setting the attribute of variant "Hide field" checked, the field is temporarily hidden, but when clicking "All Selections(F7)" button on the selection screen, the fileds become appeared.
I want to hide the field completely. Di you know how to do ?
Thank you for your support.
Regards,
Hideki Kozai

Use this attribute hide field and save the variant. Then create transaction for this program setting default variant for parameter Start with variant . The user who runs it will have it by defualt set.
Otherwise
in PBO simply use LOOP at screen and output = 0 for this field. This will ensure that field is invisible in any case.
Regards
Marcin

How to Add Push Button On Selection Screen

Hi Experts,
How to add Push button on Selection Screen.
Points will b rewarded for useful help.
Bohra.

Hi,
To create a pushbutton on the selection screen, you use:
SELECTION SCREEN PUSHBUTTON [/]<pos(len)> <push>
USER-COMMAND <ucom> [MODIF ID <key>].
The [/]<pos(len)> parameters and the MODIF IF addition have the same function as for the formatting options for underlines and comments.
<push> determines the pushbutton text. For <push>, you can specify a text symbol or a field name with a maximum length of eight characters. This character field must not be declared with the DATA statement, but is generated automatically with length <len>. The field must be filled before the selection screen is called.
For <ucom>, you must specify a code of up to four characters. When the user clicks the pushbutton on the selection screen, <ucom> is entered in the UCOMM of the SSCRFIELDS interface work area. You must use the TABLES statement to declare the SSCRFIELDS structure. The contents of the SSCRFIELDS-UCOMM field can be processed during the AT SELECTION-SCREENevent.
Ex.
REPORT DEMO.
TABLES SSCRFIELDS.
DATA FLAG.
SELECTION-SCREEN:
BEGIN OF SCREEN 500 AS WINDOW TITLE TIT,
BEGIN OF LINE,
PUSHBUTTON 2(10) BUT1 USER-COMMAND CLI1,
PUSHBUTTON 12(10) TEXT-020 USER-COMMAND CLI2,
END OF LINE,
BEGIN OF LINE,
PUSHBUTTON 2(10) BUT3 USER-COMMAND CLI3,
PUSHBUTTON 12(10) TEXT-040 USER-COMMAND CLI4,
END OF LINE,
END OF SCREEN 500.
AT SELECTION-SCREEN.
CASE SSCRFIELDS.
WHEN 'CLI1'.
FLAG = '1'.
WHEN 'CLI2'.
FLAG = '2'.
WHEN 'CLI3'.
FLAG = '3'.
WHEN 'CLI4'.
FLAG = '4'.
ENDCASE.
START-OF-SELECTION.
TIT = 'Four Buttons'.
BUT1 = 'Button 1'.
BUT3 = 'Button 3'.
CALL SELECTION-SCREEN 500 STARTING AT 10 10.
CASE FLAG.
WHEN '1'.
WRITE / 'Button 1 was clicked'.
WHEN '2'.
WRITE / 'Button 2 was clicked'.
WHEN '3'.
WRITE / 'Button 3 was clicked'.
WHEN '4'.
WRITE / 'Button 4 was clicked'.
WHEN OTHERS.
WRITE / 'No Button was clicked'.
ENDCASE.
This example defines four pushbuttons on a selection screen that is displayed as a
dialog box. The selection screen is defined in a statement chain for keyword
SELECTION-SCREEN.
If the text symbols TEXT-020 and TEXT-040 are defined as 'Button 2' and 'Button 4',
the four pushbuttons appear as follows on the selection screen displayed as a dialog box.
Regards,
Bhaskar

How to get default values on selection screen(multiple ranges)?

i want to know how to maintain default ranges in selection screen...like 2000 to 3000 and 7000 to 8000 and 11000 to 15000
all the above ranges must get by default how to provide those to selection screen by default...please give me idea...with example...

Hi Suresh,
You can either use select-options or Ranges. If you want the selection screen to be displayed with allwoing user to enter values apart for the default ones use select options else use ranges. With ranges what ever values use hard code would be set and the end user will not be able to add any more values (or range of values).
Simply write the following code
tables : <name of the table from which the field belongs>
select-options <fieldname> for <tablename>-<fieldname>.
<fieldname>-sign = 'I'.
<fieldname>-option = 'BT'.
<fieldname>-low = '7000'.
<fieldname>-high = '8000'.
append <fieldname>..
similiarly add all the ranges that you need to include as default and in your select statement use the IN operator inthe where clause to include the range.
If using range replacethe select-option with the range statement.
Thanks.

How to disapper/apper BLOCK in selection screen

Similar Messages

Maybe you are looking for